Last modified by Kilight Cao on 2025/02/08 14:05
<
From version < 205.4 >
edited by Xiaoling
on 2023/05/27 14:59
To version < 31.1 >
edited by Xiaoye
on 2022/06/22 10:22
>
Change comment: Uploaded new attachment "image-20220622102210-5.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8-V2
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,9 +1,8 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20220620202334-2.png||height="467" width="809"]]
1 +[[image:image-20220620202334-2.png]]
3 3  
4 4  
5 5  (((
6 -
5 +**LPS8v2 User Manual**
7 7  
8 8  
9 9  )))
... ... @@ -12,909 +12,206 @@
12 12  
13 13  {{toc/}}
14 14  
14 += **1. Introduction** =
15 15  
16 +== **1.1 What is LPS8v2** ==
16 16  
17 -
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
19 +The HP0C is an open-source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
28 28  
29 -(((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
22 +HP0C has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
36 36  
37 -(((
38 -Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
25 +== **1.2 Specifications** ==
44 44  
27 +**Hardware System:**
45 45  
46 -== 1.2 Specifications ==
29 + Linux Part:
47 47  
31 +* Dragino H3-Core Linux Module
48 48  
49 -(% style="color:#037691" %)**Hardware System:**
33 +* Quad-core Cortex-A7 1.2Ghz
50 50  
51 -* CPU: Quad-core Cortex-A7 1.2Ghz
52 52  * RAM: 512MB
36 +
53 53  * eMMC: 4GB
54 54  
55 -(% style="color:#037691" %)**Interface:**
39 +**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 -* Multi-Channel LoRaWAN Wireless
59 -* WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
42 +* LoRaWAN Wireless
62 62  
63 -(% style="color:#037691" %)**Operating Condition:**
44 +**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
67 -* Power Input: 5V, 2A, DC
46 +* Work Temperature: -20 ~~ 65°C
47 +* Storage Temperature: -20 ~~ 65°C
48 +* Power Input: 5V 2A, DC
68 68  
50 +== **1.3 Features** ==
69 69  
70 -
71 -== 1.3 Features ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 -* Remote Management
77 -* Auto-provisioning for batch deployment and management
54 +* Remote access with Reverse-SSH
55 +* Emulates 49x LoRa demodulators
78 78  * LoRaWAN Gateway
79 79  * 10 programmable parallel demodulation paths
80 80  * Pre-configured to support different LoRaWAN regional settings.
81 81  * Allow customizing LoRaWAN regional parameters.
82 -* Different kinds of LoRaWAN Connections such as
83 -** Semtech UDP Packet Forwarder
84 -** LoRaWAN Basic Station
85 -** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
60 +* Support Local decode ABP end node info and transfer to MQTT server
61 +* Support different level login.
62 +* Built-in //**The Things Network**// local LoRaWAN server
63 +* Built-in  //**Node-Red**// local Application server
64 +* Built-in local //**Chirpstack-gateway-bridge**//
88 88  
66 +World Widely. Include US and EU
89 89  
68 +== **1.4 Block Diagram** ==
90 90  
91 -== 1.4 Block Diagram ==
92 92  
71 += **2. Quick Start** =
93 93  
94 -
95 -== 1.5 LED Indicators ==
96 -
97 -
98 -LPS8-V2 has totally four LEDs, They are:
99 -
100 -
101 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
102 -
103 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
104 -
105 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
106 -
107 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
108 -
109 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
110 -
111 - ✓** SOLID RED:** Device doesn't have an Internet connection.
112 -
113 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
114 -
115 -
116 -== 1.6 Button Intruction ==
117 -
118 -
119 -LPS8-V2 has a black toggle button, which is:
120 -
121 -
122 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 -
124 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 -
126 -
127 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 -
129 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 -
131 -
132 -= 2. Quick Start =
133 -
134 -
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
140 -== 2.1 Connects to the network and accesses the gateway Web UI ==
78 +== **2.1 The LPS8-V2 connects to the network** ==
141 141  
142 -=== 2.1.1 connect the network ===
143 143  
81 +=== 2.1.1 **Method 1**: Connect the network via Ethernet, ===
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
146 146  
84 +=== 2.1.2 **Method 2**: Connect the network via Wi-Fi. ===
147 147  
148 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
149 149  
150 - (% style="background-color:yellow" %)**dragino+dragino**
87 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
151 151  
152 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 153  
154 -[[image:image-20230527084515-1.png]]
155 155  
156 -[[image:image-20230527085250-2.png||height="495" width="284"]]
157 157  
158 158  
159 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
160 160  
94 += **3. Web Configure Pages** =
161 161  
162 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
163 163  
97 +== **3.1 Home** ==
164 164  
165 -(((
166 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
167 -)))
99 +//Shows the system running status~://
168 168  
169 -(((
170 -You can also use this IP to connect.
171 -)))
101 +== **3.2 LoRa Settings** ==
172 172  
173 -[[image:image-20220622100129-1.png||height="332" width="1263"]]
174 174  
104 +=== **3.2.1 LoRa ~-~-> LoRa** ===
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
107 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
178 178  
109 +//Different LPS8v2 hardware versions can support different frequency ranges~://
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
111 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
112 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
181 181  
182 -
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
184 -
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
186 -
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 -
189 -
190 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
191 -
192 -
193 -As in the below photo:
194 -
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 -
197 -
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 -
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 -
202 -
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 -
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 -
207 -
208 -
209 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
210 -
211 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
212 -
213 -
214 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
215 -
216 -
217 -[[image:image-20220622102702-6.png]]
218 -
219 -
220 -
221 -**Wi-Fi configuration successful**
222 -
223 -
224 -[[image:image-20220622102847-7.png]]
225 -
226 -
227 -[[image:image-20220622102901-8.png||height="476" width="938"]]
228 -
229 -
230 -=== 2.1.2 Access Configure Web UI ===
231 -
232 -
233 -**Web Interface**
234 -
235 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
236 -
237 -
238 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
239 -
240 -You will see the login interface of LPS8-V2 as shown below.
241 -
242 -The account details for Web Login are:
243 -
244 -(% style="color:blue" %)**User Name: root**
245 -
246 -(% style="color:blue" %)**Password:   dragino**
247 -
248 -[[image:image-20230106153501-1.png||height="367" width="894"]]
249 -
250 -
251 -== 2.2  Typical Network Setup ==
252 -
253 -=== 2.2.1  Overview ===
254 -
255 -
256 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
257 -
258 -* **WAN Port Internet Mode**
259 -* **WiFi Client Mode**
260 -* **Cellular Mode**
261 -
262 -=== 2.2.2  Use WAN port to access Internet ===
263 -
264 -
265 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
266 -
267 -
268 -[[image:image-20230411100633-2.png||height="501" width="935"]]
269 -
270 -
271 -=== 2.2.3  Access the Internet as a WiFi Client ===
272 -
273 -
274 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
275 -
276 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 -
278 -[[image:image-20230411095739-1.png||height="264" width="691"]]
279 -
280 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 -
282 -
283 -=== 2.2.4  Use built-in 4G modem for internet access ===
284 -
285 -
286 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
287 -
288 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
289 -
290 -
291 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
292 -
293 -First, install the Micro SIM card as below direction
294 -
295 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
299 -
300 -
301 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
302 -
303 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
304 -
305 -
306 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 -
308 -
309 -=== 2.2.5  Check Internet connection ===
310 -
311 -In the **home** page, we can check the Internet connection.
312 -
313 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
315 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
316 -
317 -[[image:image-20230411101534-3.png||height="544" width="942"]]
318 -
319 -
320 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
321 -
322 -=== 2.3.1 Select your area frequency ===
323 -
324 -
325 -(((
326 -First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
327 -
328 -
329 -)))
330 -
331 -[[image:image-20220622103332-9.png||height="485" width="938"]]
332 -
333 -
334 -=== 2.3.2 Get the only gateway EUI ===
335 -
336 -
337 -Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
338 -
339 -
340 -[[image:image-20220622103355-10.png||height="698" width="949"]]
341 -
342 -
343 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
344 -
345 -
346 -**➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
347 -
348 -**➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
349 -
350 -**➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
351 -
352 -**➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
353 -
354 -
355 -[[image:image-20220622103956-12.png]]
356 -
357 -
358 -=== 2.3.3 Register the gateway to The Things Network ===
359 -
360 -
361 -**Login to The Things Network**
362 -
363 -[[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
364 -
365 -
366 -**Add the gateway**
367 -
368 -[[image:image-20220622104252-13.png||height="511" width="953"]]
369 -
370 -
371 -**Get it online**
372 -
373 -
374 -= 3. Web Configure Pages =
375 -
376 -== 3.1 Home ==
377 -
378 -
379 -Shows the system running status:
380 -
381 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
382 -
383 -
384 -== 3.2 LoRa Settings ==
385 -
386 -=== 3.2.1 LoRa ~-~-> LoRa ===
387 -
388 -
389 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
390 -
391 -Different LPS8v2 hardware versions can support different frequency ranges:
392 -
393 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
394 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
395 -
396 396  (% class="wikigeneratedid" %)
397 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
115 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
398 398  
399 -
400 400  (% class="wikigeneratedid" %)
401 401  [[image:image-20220616110739-1.png||height="372" width="682"]]
402 402  
403 403  
404 -(((
405 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
406 -)))
121 +//**Note ***: See this instruction for how to customize the frequency band~://
407 407  
123 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
408 408  
409 -== 3.3 LoRaWAN Settings ==
410 410  
411 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
126 +== **3.3 LoRaWAN Settings** ==
412 412  
413 413  
414 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
129 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
415 415  
416 416  
132 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
133 +
417 417  [[image:image-20220616111932-2.png||height="516" width="672"]]
418 418  
419 419  
420 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
137 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
421 421  
422 422  
423 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
140 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
424 424  
425 -
426 426  [[image:image-20220616113246-3.png||height="396" width="672"]]
427 427  
428 428  
429 -(((
430 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
431 -)))
145 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
432 432  
433 433  
434 -== 3.4 Network Settings ==
148 +== **3.4 Network Settings** ==
435 435  
436 -=== 3.4.1 Network ~-~-> WiFi ===
437 437  
151 +=== **3.4.1 Network ~-~-> WiFi** ===
438 438  
153 +
439 439  [[image:image-20220616114756-4.png||height="251" width="669"]]
440 440  
441 441  
442 -=== 3.4.2 Network ~-~-> System Status ===
157 +=== **3.4.2 Network ~-~-> System Status** ===
443 443  
444 444  
445 -[[image:image-20220820134112-2.png||height="539" width="668"]]
160 +[[image:image-20220616115229-5.png||height="548" width="665"]]
446 446  
447 447  
448 -=== 3.4.3 Network ~-~-> Network ===
163 +=== **3.4.3 Network ~-~-> Firewall** ===
449 449  
450 450  
451 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
166 +[[image:image-20220616115351-6.png||height="244" width="661"]]
452 452  
453 -[[image:image-20230214093657-2.png||height="333" width="858"]]
454 454  
169 +== **3.5 System** ==
455 455  
456 -=== 3.4.4 Network ~-~-> Cellular ===
457 457  
172 +=== **3.5.1  System ~-~-> System Overview** ===
458 458  
459 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
460 460  
461 -(% style="color:red" %)**Note: APN cannot be empty.**
462 -
463 -[[image:image-20230228115126-1.png]]
464 -
465 -
466 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
467 -
468 -[[image:image-20230228115535-2.png||height="478" width="888"]]
469 -
470 -
471 -== 3.5 System ==
472 -
473 -=== 3.5.1 System ~-~-> System Overview ===
474 -
475 -
476 476  Shows the system info:
477 477  
478 -[[image:image-20220917144512-5.png||height="618" width="853"]]
479 479  
178 +=== **3.5.2 System ~-~-> Backup/Restore** ===
480 480  
481 -=== 3.5.2 System ~-~-> System General ===
482 482  
181 +[[image:image-20220616115808-7.png||height="194" width="649"]]
483 483  
484 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
485 485  
486 -In addition, Users can customize the FallBack IP address.
184 +3.5.3
487 487  
488 -[[image:image-20230214094058-3.png]]
489 489  
187 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
490 490  
491 -=== 3.5.3 System ~-~-> Backup/Restore ===
492 -
493 -
494 -[[image:image-20220917144725-6.png||height="208" width="869"]]
495 -
496 -
497 -=== 3.5.4 System ~-~-> Remoteit ===
498 -
499 -
500 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
501 -
502 -
503 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
504 -
505 -[[image:image-20221230092303-2.png]]
506 -
507 -
508 -=== 3.5.5 System ~-~-> Package Management ===
509 -
510 -
511 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
512 -
513 -[[image:image-20230214094316-4.png]]
514 -
515 -
516 -= 4. Build-in Server =
517 -
518 -
519 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
520 -
521 -
522 -[[image:image-20230214095318-5.png||height="347" width="980"]]
523 -
524 -
525 -(% style="color:red" %)**Note:**
526 -
527 - **Path**: System ~-~-> Built-in Server
528 -
529 -
530 -**Troubleshooting:**
531 -
532 -
533 -**~ 1. URL does not jump properly**
534 -
535 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
536 -
537 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
538 -
539 -
540 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
541 -
542 -
543 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
544 -
545 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
546 -
547 -
548 -Login account:
549 -
550 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
551 -
552 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
553 -
554 -
555 -[[image:image-20220725171719-1.png||height="570" width="769"]]
556 -
557 -
558 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
559 -
560 -
561 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
562 -
563 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
564 -
565 -[[image:image-20230321092456-1.png]]
566 -
567 -
568 -== 4.2 Application Server ~-~- Node-Red ==
569 -
570 -
571 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
572 -
573 -
574 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
575 -
576 -
577 -[[image:image-20220725172124-3.png||height="610" width="843"]]
578 -
579 -
580 -
581 -=== **Using Node-Red, InfluxDB and Grafana** ===
582 -
583 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
584 -
585 -
586 -the users can refer to this link to install them.
587 -
588 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
589 -
590 -
591 -=== **Upgrade the node.js** ===
592 -
593 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
594 -
595 -
596 -the users can refer to this link to upgrade them.
597 -
598 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
599 -
600 -
601 -== 4.3 How to disable the built-in server ==
602 -
603 -
604 -Use the following commands to start and stop the TTNv3 service:
605 -
606 -(% class="box infomessage" %)
607 607  (((
608 -**# start**
609 -systemctl start ttnstack
610 -
611 -**# stop**
612 -systemctl stop ttnstack
613 -
614 -**# enable**
615 -systemctl enable ttnstack
616 -
617 -**#disable**
618 -systemctl disable ttnstack
190 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
619 619  )))
620 620  
621 -Use the following commands to start and stop the Node-Red service:
622 -
623 -(% class="box infomessage" %)
624 624  (((
625 -**# start**
626 -systemctl start nodered
194 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
627 627  
628 -**# stop**
629 -systemctl stop nodered
630 -
631 -**# enable**
632 -systemctl enable nodered
633 -
634 -**#disable**
635 -systemctl disable nodered
636 -)))
637 -
638 -
639 -== 4.4 How to use ChirpStack on LPS8-V2 ==
640 -
641 -
642 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
643 -
644 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
645 -
646 -[[image:image-20230222094908-1.png||height="133" width="798"]]
647 -
648 -
649 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
650 -
651 -
652 -
653 -= 6. How users can access LPS8-V2 using serial USB =
654 -
655 -
656 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
657 -
658 -
659 -Port 1 of the UART on the LPS8-V2 is GND
660 -
661 -(% class="box infomessage" %)
662 -(((
663 -**TXD  <~-~--> UART RXD (Gray line)**
664 -
665 -**RXD  <~-~--> UART TXD (White line)**
666 -
667 -**GND <~-~--> GND (Black line)**
668 -)))
669 -
670 -
671 -**LPS8v2 UART connection photo**
672 -
673 -
674 -[[image:image-20230421094319-2.png||height="351" width="392"]]
675 -
676 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
677 -
678 -
679 -[[image:image-20220804164928-3.png||height="320" width="332"]]
680 -
681 -
682 -[[image:image-20220804164747-2.png||height="622" width="594"]]
683 -
684 -
685 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
686 -
687 -
688 -== **Step 1: Configure Frequency Band** ==
689 -
690 -
691 -//Each country has a requirement for frequency region. Choose the right one for your area.//
692 -
693 -[[image:image-20220905164308-1.png]]
694 -
695 -
696 -
697 -== **Step 2: Configure the forward address** ==
698 -
699 -
700 -**Select one of the servers to configure.**
701 -
702 -**For example:**
703 -
704 -[[image:image-20220905164847-2.png]]
705 -
706 -
707 -
708 -== **Step 3: Download and Install the Helium-gateway-rs** ==
709 -
710 -
711 -**Access the gateway CLI via SSH.**
712 -
713 -[[image:image-20230425153417-2.png]]
714 -
715 -
716 -**Install the new gateway-rs**
717 -
718 -(% class="box infomessage" %)
719 -(((
720 -**apt update && apt install helium-gateway**
721 -)))
722 -
723 -[[image:image-20230425154058-4.png]]
724 -
725 -
726 -
727 -Option: If you installed the older gateway-rs, you have clean it
728 -
729 -(% class="box infomessage" %)
730 -(((
731 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
732 -)))
733 -
734 -[[image:image-20230425153823-3.png]]
735 -
736 -
737 -**Change the region setting:**
738 -
739 -
740 -(% class="box infomessage" %)
741 -(((
742 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
743 -
744 -
745 -**e.g: **
746 -
747 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
748 -
749 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
750 -)))
751 -
752 -
753 -**Restart the gateway-rs**
754 -
755 -(% class="box infomessage" %)
756 -(((
757 -**systemctl restart helium_gateway**
758 -)))
759 -
760 -[[image:image-20230425155612-7.png||height="265" width="911"]]
761 -
762 -
763 -
764 -**Check the helium_gateway running status**
765 -
766 -
767 -(% class="box infomessage" %)
768 -(((
769 -**systemctl status helium_gateway**
770 -)))
771 -
772 -
773 -[[image:image-20230425154740-5.png]]
774 -
775 -
776 -
777 -**Check the helium_gateway Log：**
778 -
779 -(% class="box infomessage" %)
780 -(((
781 -**journalctl -u helium_gateway -f**
782 -)))
783 -
784 -
785 -[[image:image-20230425155659-8.png]]
786 -
787 -
788 -= 8. OTA System Update =
789 -
790 -
791 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
792 -
793 -
794 -
795 -= 9. FAQ =
796 -
797 -== 9.1 How to change Hostname ==
798 -
799 -
800 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
801 -
802 -(% class="box infomessage" %)
803 -(((
804 -hostnamectl set-hostname dragino-123456
805 -)))
806 -
807 -[[image:image-20230517102429-1.png]]
808 -
809 -After the configuration is complete, run "reboot" to restart the gateway.
810 -
811 -
812 -= 10. Trouble Shooting =
813 -
814 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
815 -
816 -
817 -[[image:image-20220920135918-1.png]]
818 -
819 -
820 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
821 -
822 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
823 -
824 -
825 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
826 -
827 -**Click the update URL button to configure the URL with the current eth port address.**
828 -
829 -[[image:image-20220920141936-2.png]]
830 -
831 -
832 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
833 -
834 -
835 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
836 -
837 -[[image:image-20230508171607-1.png]]
838 -
839 -
840 -== 10.3  Fallback IP does not work, how can users check ==
841 -
842 -
843 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
844 -
845 -
846 -**1.Check whether the configuration is correct**
847 -
848 -Run the CMD command to ipconfig and ping 172.31.255.254.
849 -
850 -If this fails, the user needs to reconfigure.
851 -
852 -[[image:image-20230413170224-3.png||height="433" width="707"]]
853 -
854 -[[image:image-20230413170246-4.png]]
855 -
856 -
857 -**2. Check whether the firewall is disabled**
858 -
859 -If the firewall is not down, this will affect access to the gateway.
860 -
861 -
862 -== 10.4  Click "Manual_Update", why there is no response? ==
863 -
864 -
865 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
866 -
867 -
868 -[[image:image-20230527090555-3.png||height="660" width="832"]]
869 -
870 -
871 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
872 -
873 -
874 -(((
875 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
876 -)))
877 -
878 -(((
879 -With your question as detailed as possible. We will reply and help you in the shortest.
880 -
881 -
882 -= 12. Reference =
883 -
884 -
885 -* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
886 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
887 -
888 888  
889 889  )))
890 890  
891 -= 13. Order Info =
199 += **10. Order Info** =
892 892  
201 +(% style="color:#0000ff" %)**LPS8v2-XXX**
893 893  
894 -(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
895 -
896 896  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
897 897  
898 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
899 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
900 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
901 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
902 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
903 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
205 +* **AS923**: LoRaWAN AS923 band
206 +* **AU915**: LoRaWAN AU915 band
207 +* **EU868**: LoRaWAN EU868 band
208 +* **KR920**: LoRaWAN KR920 band
209 +* **US915**: LoRaWAN US915 band
210 +* **IN865**: LoRaWAN IN865 band
904 904  
905 -(% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
212 += **11. Manufacturer Info** =
906 906  
907 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
908 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
909 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
910 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
911 -
912 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
913 -
914 -
915 -= 14. Manufacturer Info =
916 -
917 -
918 918  **Shenzhen Dragino Technology Development co. LTD**
919 919  
920 920  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -922,38 +922,21 @@
922 922  LongCheng Street, LongGang District ; Shenzhen 518116,China
923 923  
924 924  
925 -= 15. FCC Warning =
221 += **12. FCC Warning** =
926 926  
927 -
928 -(((
929 929  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
930 -)))
931 931  
932 -(((
933 933  ~-~- Reorient or relocate the receiving antenna.
934 -)))
935 935  
936 -(((
937 937  ~-~- Increase the separation between the equipment and receiver.
938 -)))
939 939  
940 -(((
941 941  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
942 -)))
943 943  
944 -(((
945 945  ~-~- Consult the dealer or an experienced radio/TV technician for help.
946 -)))
947 947  
948 948  
949 -(((
950 950  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
951 -)))
952 952  
953 953  
954 -(((
955 955  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
956 -
957 -
958 958  )))
959 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220622102702-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -36.8 KB
Content
image-20220622102847-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -39.1 KB
Content
image-20220622102901-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -390.9 KB
Content
image-20220622103332-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -63.1 KB
Content
image-20220622103355-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -61.8 KB
Content
image-20220622103951-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20220622103956-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20220622104252-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.6 KB
Content
image-20220725171719-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -57.4 KB
Content
image-20220725172100-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -101.0 KB
Content
image-20220725172124-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -89.1 KB
Content
image-20220725194830-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220725195041-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20220728102000-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -36.4 KB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0