Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 205.4 >
edited by Xiaoling
on 2023/05/27 14:59
To version < 116.1 >
edited by Xiaoye
on 2022/11/21 11:30
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -16,22 +16,23 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,13 +39,14 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,20 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +== **1.3 Features** ==
69 69  
70 70  
71 -== 1.3 Features ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 76  * Remote Management
... ... @@ -83,39 +83,38 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
88 88  
87 +== **1.4 Block Diagram** ==
89 89  
90 90  
91 -== 1.4 Block Diagram ==
92 92  
91 +== **1.5 LED Indicators** ==
93 93  
94 94  
95 -== 1.5 LED Indicators ==
96 -
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
104 104  
105 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
106 106  
107 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 +// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 108  
109 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 +// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 - ✓** SOLID RED:** Device doesn't have an Internet connection.
107 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 +(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
114 114  
115 115  
116 -== 1.6 Button Intruction ==
117 117  
113 +== **1.6 Button Intruction** ==
118 118  
115 +
119 119  LPS8-V2 has a black toggle button, which is:
120 120  
121 121  
... ... @@ -129,41 +129,27 @@
129 129   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 130  
131 131  
132 -= 2. Quick Start =
133 133  
130 += **2. Quick Start** =
134 134  
132 +
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
140 -== 2.1 Connects to the network and accesses the gateway Web UI ==
141 141  
142 -=== 2.1.1 connect the network ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
143 143  
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 +== **2.1.1 connect the network.** ==
146 146  
147 147  
148 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
149 149  
150 - (% style="background-color:yellow" %)**dragino+dragino**
151 151  
152 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 -
154 -[[image:image-20230527084515-1.png]]
155 -
156 -[[image:image-20230527085250-2.png||height="495" width="284"]]
157 -
158 -
159 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
160 -
161 -
162 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
163 -
164 -
165 165  (((
166 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
167 167  )))
168 168  
169 169  (((
... ... @@ -174,40 +174,9 @@
174 174  
175 175  
176 176  
177 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
178 178  
179 179  
180 -[[image:image-20230107084650-2.png||height="310" width="839"]]
181 -
182 -
183 -(% style="color:blue" %)**Steps to connect via fallback IP:**
184 -
185 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
186 -
187 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
188 -
189 -
190 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
191 -
192 -
193 -As in the below photo:
194 -
195 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
196 -
197 -
198 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
199 -
200 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
201 -
202 -
203 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
204 -
205 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
206 -
207 -
208 -
209 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
210 -
211 211  [[image:image-20220622100542-2.png||height="369" width="1256"]]
212 212  
213 213  
... ... @@ -227,101 +227,13 @@
227 227  [[image:image-20220622102901-8.png||height="476" width="938"]]
228 228  
229 229  
230 -=== 2.1.2 Access Configure Web UI ===
231 231  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
232 232  
233 -**Web Interface**
234 234  
235 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
236 236  
237 237  
238 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
239 -
240 -You will see the login interface of LPS8-V2 as shown below.
241 -
242 -The account details for Web Login are:
243 -
244 -(% style="color:blue" %)**User Name: root**
245 -
246 -(% style="color:blue" %)**Password:   dragino**
247 -
248 -[[image:image-20230106153501-1.png||height="367" width="894"]]
249 -
250 -
251 -== 2.2  Typical Network Setup ==
252 -
253 -=== 2.2.1  Overview ===
254 -
255 -
256 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
257 -
258 -* **WAN Port Internet Mode**
259 -* **WiFi Client Mode**
260 -* **Cellular Mode**
261 -
262 -=== 2.2.2  Use WAN port to access Internet ===
263 -
264 -
265 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
266 -
267 -
268 -[[image:image-20230411100633-2.png||height="501" width="935"]]
269 -
270 -
271 -=== 2.2.3  Access the Internet as a WiFi Client ===
272 -
273 -
274 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
275 -
276 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
277 -
278 -[[image:image-20230411095739-1.png||height="264" width="691"]]
279 -
280 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
281 -
282 -
283 -=== 2.2.4  Use built-in 4G modem for internet access ===
284 -
285 -
286 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
287 -
288 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
289 -
290 -
291 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
292 -
293 -First, install the Micro SIM card as below direction
294 -
295 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
299 -
300 -
301 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
302 -
303 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
304 -
305 -
306 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
307 -
308 -
309 -=== 2.2.5  Check Internet connection ===
310 -
311 -In the **home** page, we can check the Internet connection.
312 -
313 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
314 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
315 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
316 -
317 -[[image:image-20230411101534-3.png||height="544" width="942"]]
318 -
319 -
320 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
321 -
322 -=== 2.3.1 Select your area frequency ===
323 -
324 -
325 325  (((
326 326  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
327 327  
... ... @@ -331,9 +331,10 @@
331 331  [[image:image-20220622103332-9.png||height="485" width="938"]]
332 332  
333 333  
334 -=== 2.3.2 Get the only gateway EUI ===
335 335  
199 +=== **2.2.2 Get the only gateway EUI** ===
336 336  
201 +
337 337  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
338 338  
339 339  
... ... @@ -355,9 +355,10 @@
355 355  [[image:image-20220622103956-12.png]]
356 356  
357 357  
358 -=== 2.3.3 Register the gateway to The Things Network ===
359 359  
224 +== **2.2.3 Register the gateway to The Things Network** ==
360 360  
226 +
361 361  **Login to The Things Network**
362 362  
363 363  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -371,30 +371,34 @@
371 371  **Get it online**
372 372  
373 373  
374 -= 3. Web Configure Pages =
375 375  
376 -== 3.1 Home ==
241 += **3. Web Configure Pages** =
377 377  
378 378  
379 -Shows the system running status:
244 +== **3.1 Home** ==
380 380  
246 +
247 +//Shows the system running status~://
248 +
381 381  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
382 382  
383 383  
384 -== 3.2 LoRa Settings ==
385 385  
386 -=== 3.2.1 LoRa ~-~-> LoRa ===
253 +== **3.2 LoRa Settings** ==
387 387  
388 388  
389 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
256 +=== **3.2.1 LoRa ~-~-> LoRa** ===
390 390  
391 -Different LPS8v2 hardware versions can support different frequency ranges:
392 392  
393 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
394 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
259 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
395 395  
261 +//Different LPS8v2 hardware versions can support different frequency ranges~://
262 +
263 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
264 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
265 +
396 396  (% class="wikigeneratedid" %)
397 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
267 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
398 398  
399 399  
400 400  (% class="wikigeneratedid" %)
... ... @@ -406,23 +406,26 @@
406 406  )))
407 407  
408 408  
409 -== 3.3 LoRaWAN Settings ==
410 410  
411 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
412 412  
413 413  
414 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
415 415  
416 416  
286 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 +
288 +
417 417  [[image:image-20220616111932-2.png||height="516" width="672"]]
418 418  
419 419  
420 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
421 421  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
422 422  
423 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
424 424  
296 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
425 425  
298 +
426 426  [[image:image-20220616113246-3.png||height="396" width="672"]]
427 427  
428 428  
... ... @@ -431,95 +431,57 @@
431 431  )))
432 432  
433 433  
434 -== 3.4 Network Settings ==
435 435  
436 -=== 3.4.1 Network ~-~-> WiFi ===
308 +== **3.4 Network Settings** ==
437 437  
438 438  
439 -[[image:image-20220616114756-4.png||height="251" width="669"]]
311 +=== **3.4.1 Network ~-~-> WiFi** ===
440 440  
441 441  
442 -=== 3.4.2 Network ~-~-> System Status ===
314 +[[image:image-20220616114756-4.png||height="251" width="669"]]
443 443  
444 444  
445 -[[image:image-20220820134112-2.png||height="539" width="668"]]
446 446  
318 +=== **3.4.2 Network ~-~-> System Status** ===
447 447  
448 -=== 3.4.3 Network ~-~-> Network ===
449 449  
321 +[[image:image-20220820134112-2.png||height="539" width="668"]]
450 450  
451 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
452 452  
453 -[[image:image-20230214093657-2.png||height="333" width="858"]]
454 454  
325 +=== **3.4.3 Network ~-~-> Firewall** ===
455 455  
456 -=== 3.4.4 Network ~-~-> Cellular ===
457 457  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
458 458  
459 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
460 460  
461 -(% style="color:red" %)**Note: APN cannot be empty.**
462 462  
463 -[[image:image-20230228115126-1.png]]
332 +== **3.5 System** ==
464 464  
465 465  
466 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
335 +=== **3.5.1  System ~-~-> System Overview** ===
467 467  
468 -[[image:image-20230228115535-2.png||height="478" width="888"]]
469 469  
470 -
471 -== 3.5 System ==
472 -
473 -=== 3.5.1 System ~-~-> System Overview ===
474 -
475 -
476 476  Shows the system info:
477 477  
478 478  [[image:image-20220917144512-5.png||height="618" width="853"]]
479 479  
480 480  
481 -=== 3.5.2 System ~-~-> System General ===
482 482  
344 +=== **3.5.2 System ~-~-> Backup/Restore** ===
483 483  
484 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
485 485  
486 -In addition, Users can customize the FallBack IP address.
487 -
488 -[[image:image-20230214094058-3.png]]
489 -
490 -
491 -=== 3.5.3 System ~-~-> Backup/Restore ===
492 -
493 -
494 494  [[image:image-20220917144725-6.png||height="208" width="869"]]
495 495  
496 496  
497 -=== 3.5.4 System ~-~-> Remoteit ===
498 498  
351 += **4. Build-in Server** =
499 499  
500 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
501 501  
502 -
503 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
504 -
505 -[[image:image-20221230092303-2.png]]
506 -
507 -
508 -=== 3.5.5 System ~-~-> Package Management ===
509 -
510 -
511 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
512 -
513 -[[image:image-20230214094316-4.png]]
514 -
515 -
516 -= 4. Build-in Server =
517 -
518 -
519 519  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
520 520  
521 521  
522 -[[image:image-20230214095318-5.png||height="347" width="980"]]
357 +[[image:image-20220820115644-1.png||height="217" width="778"]]
523 523  
524 524  
525 525  (% style="color:red" %)**Note:**
... ... @@ -537,9 +537,10 @@
537 537   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
538 538  
539 539  
540 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
541 541  
376 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
542 542  
378 +
543 543  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
544 544  
545 545  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -555,19 +555,10 @@
555 555  [[image:image-20220725171719-1.png||height="570" width="769"]]
556 556  
557 557  
558 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
559 559  
395 +== **4.2 Application Server ~-~- Node-Red** ==
560 560  
561 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
562 562  
563 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
564 -
565 -[[image:image-20230321092456-1.png]]
566 -
567 -
568 -== 4.2 Application Server ~-~- Node-Red ==
569 -
570 -
571 571  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
572 572  
573 573  
... ... @@ -578,7 +578,7 @@
578 578  
579 579  
580 580  
581 -=== **Using Node-Red, InfluxDB and Grafana** ===
408 +=== **Using Node-Red, InfluxDB and Grafana,** ===
582 582  
583 583  The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
584 584  
... ... @@ -588,78 +588,16 @@
588 588  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
589 589  
590 590  
591 -=== **Upgrade the node.js** ===
418 += **5. How users can access LPS8v2 using serial USB** =
592 592  
593 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
594 594  
421 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
595 595  
596 -the users can refer to this link to upgrade them.
597 597  
598 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
424 +Port 1 of the UART on the LPS8v2 is GND
599 599  
600 -
601 -== 4.3 How to disable the built-in server ==
602 -
603 -
604 -Use the following commands to start and stop the TTNv3 service:
605 -
606 606  (% class="box infomessage" %)
607 607  (((
608 -**# start**
609 -systemctl start ttnstack
610 -
611 -**# stop**
612 -systemctl stop ttnstack
613 -
614 -**# enable**
615 -systemctl enable ttnstack
616 -
617 -**#disable**
618 -systemctl disable ttnstack
619 -)))
620 -
621 -Use the following commands to start and stop the Node-Red service:
622 -
623 -(% class="box infomessage" %)
624 -(((
625 -**# start**
626 -systemctl start nodered
627 -
628 -**# stop**
629 -systemctl stop nodered
630 -
631 -**# enable**
632 -systemctl enable nodered
633 -
634 -**#disable**
635 -systemctl disable nodered
636 -)))
637 -
638 -
639 -== 4.4 How to use ChirpStack on LPS8-V2 ==
640 -
641 -
642 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
643 -
644 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
645 -
646 -[[image:image-20230222094908-1.png||height="133" width="798"]]
647 -
648 -
649 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
650 -
651 -
652 -
653 -= 6. How users can access LPS8-V2 using serial USB =
654 -
655 -
656 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
657 -
658 -
659 -Port 1 of the UART on the LPS8-V2 is GND
660 -
661 -(% class="box infomessage" %)
662 -(((
663 663  **TXD  <~-~--> UART RXD (Gray line)**
664 664  
665 665  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -670,9 +670,10 @@
670 670  
671 671  **LPS8v2 UART connection photo**
672 672  
438 +[[image:image-20220804163015-1.png||height="621" width="466"]]
673 673  
674 -[[image:image-20230421094319-2.png||height="351" width="392"]]
675 675  
441 +
676 676  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
677 677  
678 678  
... ... @@ -682,9 +682,10 @@
682 682  [[image:image-20220804164747-2.png||height="622" width="594"]]
683 683  
684 684  
685 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
686 686  
452 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
687 687  
454 +
688 688  == **Step 1: Configure Frequency Band** ==
689 689  
690 690  
... ... @@ -710,72 +710,59 @@
710 710  
711 711  **Access the gateway CLI via SSH.**
712 712  
713 -[[image:image-20230425153417-2.png]]
480 +[[image:image-20220905165222-3.png]]
714 714  
715 715  
716 -**Install the new gateway-rs**
483 +**Download gateway-rs.**
717 717  
485 +[[image:image-20220905165715-5.png]]
486 +
718 718  (% class="box infomessage" %)
719 719  (((
720 -**apt update && apt install helium-gateway**
489 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
721 721  )))
722 722  
723 -[[image:image-20230425154058-4.png]]
724 724  
493 +**Install gateway-rs.**
725 725  
495 +[[image:image-20220905165917-7.png]]
726 726  
727 -Option: If you installed the older gateway-rs, you have clean it
728 -
729 729  (% class="box infomessage" %)
730 730  (((
731 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
499 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
732 732  )))
733 733  
734 -[[image:image-20230425153823-3.png]]
735 735  
503 +**Modify configuration.**
736 736  
737 -**Change the region setting:**
738 738  
506 +[[image:image-20220905173847-12.png]]
739 739  
740 -(% class="box infomessage" %)
741 -(((
742 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
743 743  
744 -
745 -**e.g: **
746 -
747 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
748 -
749 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
750 -)))
751 -
752 -
753 -**Restart the gateway-rs**
754 -
755 755  (% class="box infomessage" %)
756 756  (((
757 -**systemctl restart helium_gateway**
511 +**region=<Enter regional parameters> \
512 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
758 758  )))
759 759  
760 -[[image:image-20230425155612-7.png||height="265" width="911"]]
761 761  
517 +**Restart the helium_gateway**
762 762  
519 +[[image:image-20220905170920-9.png]]
763 763  
764 -**Check the helium_gateway running status**
765 765  
766 -
767 767  (% class="box infomessage" %)
768 768  (((
769 -**systemctl status helium_gateway**
524 +**systemctl restart helium_gateway**
770 770  )))
771 771  
772 772  
773 -[[image:image-20230425154740-5.png]]
528 +**Check the helium_gateway Log：**
774 774  
530 +[[image:image-20220905173952-13.png]]
775 775  
776 776  
777 -**Check the helium_gateway Log：**
778 -
779 779  (% class="box infomessage" %)
780 780  (((
781 781  **journalctl -u helium_gateway -f**
... ... @@ -782,38 +782,23 @@
782 782  )))
783 783  
784 784  
785 -[[image:image-20230425155659-8.png]]
539 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
786 786  
541 +where the helium gateway log is shown:
787 787  
788 -= 8. OTA System Update =
543 +[[image:image-20220905174534-14.png]]
789 789  
790 790  
791 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
546 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
792 792  
793 793  
794 794  
795 -= 9. FAQ =
550 += **7. Trouble Shooting** =
796 796  
797 -== 9.1 How to change Hostname ==
798 798  
553 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
799 799  
800 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
801 801  
802 -(% class="box infomessage" %)
803 -(((
804 -hostnamectl set-hostname dragino-123456
805 -)))
806 -
807 -[[image:image-20230517102429-1.png]]
808 -
809 -After the configuration is complete, run "reboot" to restart the gateway.
810 -
811 -
812 -= 10. Trouble Shooting =
813 -
814 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
815 -
816 -
817 817  [[image:image-20220920135918-1.png]]
818 818  
819 819  
... ... @@ -829,59 +829,23 @@
829 829  [[image:image-20220920141936-2.png]]
830 830  
831 831  
832 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
833 833  
834 834  
835 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
573 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
836 836  
837 -[[image:image-20230508171607-1.png]]
838 838  
839 -
840 -== 10.3  Fallback IP does not work, how can users check ==
841 -
842 -
843 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
844 -
845 -
846 -**1.Check whether the configuration is correct**
847 -
848 -Run the CMD command to ipconfig and ping 172.31.255.254.
849 -
850 -If this fails, the user needs to reconfigure.
851 -
852 -[[image:image-20230413170224-3.png||height="433" width="707"]]
853 -
854 -[[image:image-20230413170246-4.png]]
855 -
856 -
857 -**2. Check whether the firewall is disabled**
858 -
859 -If the firewall is not down, this will affect access to the gateway.
860 -
861 -
862 -== 10.4  Click "Manual_Update", why there is no response? ==
863 -
864 -
865 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
866 -
867 -
868 -[[image:image-20230527090555-3.png||height="660" width="832"]]
869 -
870 -
871 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
872 -
873 -
874 874  (((
875 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
577 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
876 876  )))
877 877  
878 878  (((
879 -With your question as detailed as possible. We will reply and help you in the shortest.
581 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
880 880  
881 881  
882 -= 12. Reference =
883 883  
585 += **9. Reference** =
884 884  
587 +
885 885  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
886 886  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
887 887  
... ... @@ -888,7 +888,7 @@
888 888  
889 889  )))
890 890  
891 -= 13. Order Info =
594 += **10. Order Info** =
892 892  
893 893  
894 894  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -912,9 +912,10 @@
912 912  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
913 913  
914 914  
915 -= 14. Manufacturer Info =
916 916  
619 += **10. Manufacturer Info** =
917 917  
621 +
918 918  **Shenzhen Dragino Technology Development co. LTD**
919 919  
920 920  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -922,9 +922,10 @@
922 922  LongCheng Street, LongGang District ; Shenzhen 518116,China
923 923  
924 924  
925 -= 15. FCC Warning =
926 926  
630 += **11. FCC Warning** =
927 927  
632 +
928 928  (((
929 929  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
930 930  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0