Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 205.3 >
edited by Xiaoling
on 2023/05/27 14:57
To version < 66.1 >
edited by Xiaoye
on 2022/07/25 19:50
>
Change comment: Uploaded new attachment "image-20220725195041-1.jpeg", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,9 +2,8 @@
1 -(% style="text-align:center" %)
2 2  [[image:image-20220620202334-2.png||height="467" width="809"]]
3 3  
4 4  
5 5  (((
6 -
5 +**LPS8v2 User Manual**
7 7  
8 8  
9 9  )))
... ... @@ -12,63 +12,44 @@
12 12  
13 13  {{toc/}}
14 14  
14 += **1. Introduction** =
15 15  
16 +== **1.1 What is LPS8v2** ==
16 16  
17 -
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 -The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
19 +The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  
29 -(((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
21 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  
33 -(((
34 -LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
23 +LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 -LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
27 +LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  
45 45  
46 -== 1.2 Specifications ==
30 +== **1.2 Specifications** ==
47 47  
32 +**Hardware System:**
48 48  
49 -(% style="color:#037691" %)**Hardware System:**
50 -
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
55 -(% style="color:#037691" %)**Interface:**
38 +**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 -(% style="color:#037691" %)**Operating Condition:**
44 +**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
46 +* Work Temperature: -20 ~~ 65°C
47 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
50 +== **1.3 Features** ==
70 70  
71 -
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,264 +81,117 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
64 +* Built-in //**The Things Network**// local LoRaWAN server
65 +* Built-in  //**Node-Red**// local Application server
86 86  
87 -== 1.4 Block Diagram ==
67 +== **1.4 Block Diagram** ==
88 88  
89 89  
70 +== **1.5 LED Indicators** ==
90 90  
91 -== 1.5 LED Indicators ==
92 -
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
75 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
100 100  
101 -(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
78 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 - ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
104 104  
105 - ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
81 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
106 106  
107 - ✓** SOLID RED:** Device doesn't have an Internet connection.
83 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
108 108  
109 -(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
85 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
87 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
111 111  
112 -== 1.6 Button Intruction ==
113 113  
90 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
93 += **2. Quick Start** =
117 117  
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 -
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 -
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
100 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 -=== 2.1.1 connect the network ===
139 139  
103 +== **2.1.1 connect the network.** ==
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
105 +=== ===
142 142  
107 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
143 143  
144 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
109 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 -
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 -
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -
155 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 -
157 -
158 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 -
160 -
161 -(((
162 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
163 -)))
164 -
165 -(((
166 166  You can also use this IP to connect.
167 -)))
168 168  
169 169  [[image:image-20220622100129-1.png||height="332" width="1263"]]
170 170  
171 171  
116 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
172 172  
173 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
174 174  
119 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
175 175  
176 -[[image:image-20230107084650-2.png||height="310" width="839"]]
177 177  
122 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
178 178  
179 -(% style="color:blue" %)**Steps to connect via fallback IP:**
180 180  
181 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
125 +**Steps to connect via fallback IP:**
182 182  
183 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
127 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
184 184  
129 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
185 185  
186 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
131 +[[image:image-20220622101433-4.png]]
187 187  
188 188  
189 -As in the below photo:
134 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
190 190  
191 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
192 192  
137 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
193 193  
194 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 195  
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
140 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
197 197  
198 198  
199 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
200 -
201 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
202 -
203 -
204 -
205 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
206 -
207 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
208 -
209 -
210 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
211 -
212 -
213 213  [[image:image-20220622102702-6.png]]
214 214  
215 215  
216 -
217 217  **Wi-Fi configuration successful**
218 218  
219 219  
220 220  [[image:image-20220622102847-7.png]]
221 221  
151 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
222 222  
223 -[[image:image-20220622102901-8.png||height="476" width="938"]]
224 224  
225 225  
226 -=== 2.1.2 Access Configure Web UI ===
227 227  
156 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
228 228  
229 -**Web Interface**
230 230  
231 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
159 +=== **2.2.1 Select your area frequency** ===
232 232  
233 -
234 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
235 -
236 -You will see the login interface of LPS8-V2 as shown below.
237 -
238 -The account details for Web Login are:
239 -
240 -(% style="color:#4f81bd" %)**User Name: root**
241 -
242 -(% style="color:#4f81bd" %)**Password:   dragino**
243 -
244 -[[image:image-20230106153501-1.png||height="367" width="894"]]
245 -
246 -
247 -== 2.2  Typical Network Setup ==
248 -
249 -=== 2.2.1  Overview ===
250 -
251 -
252 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 -
254 -* **WAN Port Internet Mode**
255 -* **WiFi Client Mode**
256 -* **Cellular Mode**
257 -
258 -=== 2.2.2  Use WAN port to access Internet ===
259 -
260 -
261 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
262 -
263 -
264 -[[image:image-20230411100633-2.png||height="501" width="935"]]
265 -
266 -
267 -=== 2.2.3  Access the Internet as a WiFi Client ===
268 -
269 -
270 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 -
272 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
273 -
274 -[[image:image-20230411095739-1.png||height="264" width="691"]]
275 -
276 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
277 -
278 -
279 -=== 2.2.4  Use built-in 4G modem for internet access ===
280 -
281 -
282 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
283 -
284 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
285 -
286 -
287 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
288 -
289 -First, install the Micro SIM card as below direction
290 -
291 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
292 -
293 -
294 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
295 -
296 -
297 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
298 -
299 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
300 -
301 -
302 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
303 -
304 -
305 -=== 2.2.5  Check Internet connection ===
306 -
307 -In the **home** page, we can check the Internet connection.
308 -
309 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
310 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
311 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
312 -
313 -[[image:image-20230411101534-3.png||height="544" width="942"]]
314 -
315 -
316 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
317 -
318 -=== 2.3.1 Select your area frequency ===
319 -
320 -
321 -(((
322 322  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
323 323  
324 -
325 -)))
163 +[[image:image-20220622103332-9.png]]
326 326  
327 -[[image:image-20220622103332-9.png||height="485" width="938"]]
328 328  
166 +=== **2.2.2 Get the only gateway EUI** ===
329 329  
330 -=== 2.3.2 Get the only gateway EUI ===
331 -
332 -
333 333  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
334 334  
170 +[[image:image-20220622103355-10.png]]
335 335  
336 -[[image:image-20220622103355-10.png||height="698" width="949"]]
337 337  
173 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
338 338  
339 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
340 -
341 -
342 342  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
343 343  
344 344  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -351,14 +351,13 @@
351 351  [[image:image-20220622103956-12.png]]
352 352  
353 353  
354 -=== 2.3.3 Register the gateway to The Things Network ===
355 355  
188 +== 2.2.3 Register the gateway to The Things Network ==
356 356  
357 357  **Login to The Things Network**
358 358  
359 359  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
360 360  
361 -
362 362  **Add the gateway**
363 363  
364 364  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -367,551 +367,187 @@
367 367  **Get it online**
368 368  
369 369  
370 -= 3. Web Configure Pages =
202 += **3. Web Configure Pages** =
371 371  
372 -== 3.1 Home ==
373 373  
205 +== **3.1 Home** ==
374 374  
375 -Shows the system running status:
207 +//Shows the system running status~://
376 376  
377 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
209 +== **3.2 LoRa Settings** ==
378 378  
379 379  
380 -== 3.2 LoRa Settings ==
212 +=== **3.2.1 LoRa ~-~-> LoRa** ===
381 381  
382 -=== 3.2.1 LoRa ~-~-> LoRa ===
383 383  
215 +//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
384 384  
385 -This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
217 +//Different LPS8v2 hardware versions can support different frequency ranges~://
386 386  
387 -Different LPS8v2 hardware versions can support different frequency ranges:
219 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
220 +* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
388 388  
389 -* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
390 -* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
391 -
392 392  (% class="wikigeneratedid" %)
393 -After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
223 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
394 394  
395 -
396 396  (% class="wikigeneratedid" %)
397 397  [[image:image-20220616110739-1.png||height="372" width="682"]]
398 398  
399 399  
400 -(((
401 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
402 -)))
229 +//**Note ***: See this instruction for how to customize the frequency band~://
403 403  
231 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
404 404  
405 -== 3.3 LoRaWAN Settings ==
406 406  
407 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
234 +== **3.3 LoRaWAN Settings** ==
408 408  
409 409  
410 -This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
237 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
411 411  
412 412  
240 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
241 +
413 413  [[image:image-20220616111932-2.png||height="516" width="672"]]
414 414  
415 415  
416 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
245 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
417 417  
418 418  
419 -This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
248 +//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
420 420  
421 -
422 422  [[image:image-20220616113246-3.png||height="396" width="672"]]
423 423  
424 424  
425 -(((
426 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
427 -)))
253 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
428 428  
429 429  
430 -== 3.4 Network Settings ==
256 +== **3.4 Network Settings** ==
431 431  
432 -=== 3.4.1 Network ~-~-> WiFi ===
433 433  
259 +=== **3.4.1 Network ~-~-> WiFi** ===
434 434  
261 +
435 435  [[image:image-20220616114756-4.png||height="251" width="669"]]
436 436  
437 437  
438 -=== 3.4.2 Network ~-~-> System Status ===
265 +=== **3.4.2 Network ~-~-> System Status** ===
439 439  
440 440  
441 -[[image:image-20220820134112-2.png||height="539" width="668"]]
268 +[[image:image-20220616115229-5.png||height="548" width="665"]]
442 442  
443 443  
444 -=== 3.4.3 Network ~-~-> Network ===
271 +=== **3.4.3 Network ~-~-> Firewall** ===
445 445  
446 446  
447 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
274 +[[image:image-20220616115351-6.png||height="244" width="661"]]
448 448  
449 -[[image:image-20230214093657-2.png||height="333" width="858"]]
450 450  
277 +== **3.5 System** ==
451 451  
452 -=== 3.4.4 Network ~-~-> Cellular ===
453 453  
280 +=== **3.5.1  System ~-~-> System Overview** ===
454 454  
455 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
456 456  
457 -(% style="color:red" %)**Note: APN cannot be empty.**
458 -
459 -[[image:image-20230228115126-1.png]]
460 -
461 -
462 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
463 -
464 -[[image:image-20230228115535-2.png||height="478" width="888"]]
465 -
466 -
467 -== 3.5 System ==
468 -
469 -=== 3.5.1 System ~-~-> System Overview ===
470 -
471 -
472 472  Shows the system info:
473 473  
474 -[[image:image-20220917144512-5.png||height="618" width="853"]]
475 475  
286 +=== **3.5.2 System ~-~-> Backup/Restore** ===
476 476  
477 -=== 3.5.2 System ~-~-> System General ===
478 478  
289 +[[image:image-20220616115808-7.png||height="194" width="649"]]
479 479  
480 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
481 481  
482 -In addition, Users can customize the FallBack IP address.
483 483  
484 -[[image:image-20230214094058-3.png]]
293 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
485 485  
486 486  
487 -=== 3.5.3 System ~-~-> Backup/Restore ===
296 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
488 488  
298 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
489 489  
490 -[[image:image-20220917144725-6.png||height="208" width="869"]]
491 491  
301 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
492 492  
493 -=== 3.5.4 System ~-~-> Remoteit ===
494 494  
495 -
496 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
497 -
498 -
499 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
500 -
501 -[[image:image-20221230092303-2.png]]
502 -
503 -
504 -=== 3.5.5 System ~-~-> Package Management ===
505 -
506 -
507 -In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
508 -
509 -[[image:image-20230214094316-4.png]]
510 -
511 -
512 -= 4. Build-in Server =
513 -
514 -
515 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
516 -
517 -
518 -[[image:image-20230214095318-5.png||height="347" width="980"]]
519 -
520 -
521 -(% style="color:red" %)**Note:**
522 -
523 - **Path**: System ~-~-> Built-in Server
524 -
525 -
526 -**Troubleshooting:**
527 -
528 -
529 -**~ 1. URL does not jump properly**
530 -
531 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
532 -
533 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
534 -
535 -
536 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
537 -
538 -
539 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
540 -
541 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
542 -
543 -
544 544  Login account:
545 545  
546 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
306 +**User ID: ** (% class="mark" %)admin
547 547  
548 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
308 +**Password: ** (% class="mark" %)dragino
549 549  
550 550  
551 551  [[image:image-20220725171719-1.png||height="570" width="769"]]
552 552  
553 553  
554 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
555 555  
315 += **5. Build-in Application Server ~-~- Node-Red** =
556 556  
557 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
558 558  
559 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
318 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
560 560  
561 -[[image:image-20230321092456-1.png]]
320 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
562 562  
563 563  
564 -== 4.2 Application Server ~-~- Node-Red ==
323 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
565 565  
566 -
567 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
568 -
569 -
570 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
571 -
572 -
573 573  [[image:image-20220725172124-3.png||height="610" width="843"]]
574 574  
575 575  
576 576  
577 -=== **Using Node-Red, InfluxDB and Grafana** ===
329 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
330 + You can complete the installation manually with the following command.(%%)**
578 578  
579 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
580 580  
581 -
582 -the users can refer to this link to install them.
583 -
584 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
585 -
586 -
587 -=== **Upgrade the node.js** ===
588 -
589 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
590 -
591 -
592 -the users can refer to this link to upgrade them.
593 -
594 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
595 -
596 -
597 -== 4.3 How to disable the built-in server ==
598 -
599 -
600 -Use the following commands to start and stop the TTNv3 service:
601 -
602 602  (% class="box infomessage" %)
603 603  (((
604 -**# start**
605 -systemctl start ttnstack
606 -
607 -**# stop**
608 -systemctl stop ttnstack
609 -
610 -**# enable**
611 -systemctl enable ttnstack
612 -
613 -**#disable**
614 -systemctl disable ttnstack
335 +(% class="mark" %)cd /tmp && wget  [[http:~~/~~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh>>url:http://repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh]]
336 +(% class="mark" %)chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh
615 615  )))
616 616  
617 -Use the following commands to start and stop the Node-Red service:
618 618  
619 -(% class="box infomessage" %)
620 -(((
621 -**# start**
622 -systemctl start nodered
623 623  
624 -**# stop**
625 -systemctl stop nodered
341 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
626 626  
627 -**# enable**
628 -systemctl enable nodered
629 -
630 -**#disable**
631 -systemctl disable nodered
632 -)))
633 -
634 -
635 -== 4.4 How to use ChirpStack on LPS8-V2 ==
636 -
637 -
638 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
639 -
640 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
641 -
642 -[[image:image-20230222094908-1.png||height="133" width="798"]]
643 -
644 -
645 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
646 -
647 -
648 -
649 -= 6. How users can access LPS8-V2 using serial USB =
650 -
651 -
652 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
653 -
654 -
655 -Port 1 of the UART on the LPS8-V2 is GND
656 -
657 -(% class="box infomessage" %)
658 658  (((
659 -**TXD  <~-~--> UART RXD (Gray line)**
660 -
661 -**RXD  <~-~--> UART TXD (White line)**
662 -
663 -**GND <~-~--> GND (Black line)**
344 +**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
664 664  )))
665 665  
666 -
667 -**LPS8v2 UART connection photo**
668 -
669 -
670 -[[image:image-20230421094319-2.png||height="351" width="392"]]
671 -
672 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
673 -
674 -
675 -[[image:image-20220804164928-3.png||height="320" width="332"]]
676 -
677 -
678 -[[image:image-20220804164747-2.png||height="622" width="594"]]
679 -
680 -
681 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
682 -
683 -
684 -== **Step 1: Configure Frequency Band** ==
685 -
686 -
687 -//Each country has a requirement for frequency region. Choose the right one for your area.//
688 -
689 -[[image:image-20220905164308-1.png]]
690 -
691 -
692 -
693 -== **Step 2: Configure the forward address** ==
694 -
695 -
696 -**Select one of the servers to configure.**
697 -
698 -**For example:**
699 -
700 -[[image:image-20220905164847-2.png]]
701 -
702 -
703 -
704 -== **Step 3: Download and Install the Helium-gateway-rs** ==
705 -
706 -
707 -**Access the gateway CLI via SSH.**
708 -
709 -[[image:image-20230425153417-2.png]]
710 -
711 -
712 -**Install the new gateway-rs**
713 -
714 -(% class="box infomessage" %)
715 715  (((
716 -**apt update && apt install helium-gateway**
717 -)))
348 +**//With your question as detailed as possible. We will reply and help you in the shortest.//**
718 718  
719 -[[image:image-20230425154058-4.png]]
720 720  
351 += **11 Reference** =
721 721  
722 -
723 -Option: If you installed the older gateway-rs, you have clean it
724 -
725 -(% class="box infomessage" %)
726 -(((
727 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
728 -)))
729 -
730 -[[image:image-20230425153823-3.png]]
731 -
732 -
733 -**Change the region setting:**
734 -
735 -
736 -(% class="box infomessage" %)
737 -(((
738 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
739 -
740 -
741 -**e.g: **
742 -
743 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
744 -
745 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
746 -)))
747 -
748 -
749 -**Restart the gateway-rs**
750 -
751 -(% class="box infomessage" %)
752 -(((
753 -**systemctl restart helium_gateway**
754 -)))
755 -
756 -[[image:image-20230425155612-7.png||height="265" width="911"]]
757 -
758 -
759 -
760 -**Check the helium_gateway running status**
761 -
762 -
763 -(% class="box infomessage" %)
764 -(((
765 -**systemctl status helium_gateway**
766 -)))
767 -
768 -
769 -[[image:image-20230425154740-5.png]]
770 -
771 -
772 -
773 -**Check the helium_gateway Log：**
774 -
775 -(% class="box infomessage" %)
776 -(((
777 -**journalctl -u helium_gateway -f**
778 -)))
779 -
780 -
781 -[[image:image-20230425155659-8.png]]
782 -
783 -
784 -= 8. OTA System Update =
785 -
786 -
787 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
788 -
789 -
790 -
791 -= 9. FAQ =
792 -
793 -== 9.1 How to change Hostname ==
794 -
795 -
796 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
797 -
798 -(% class="box infomessage" %)
799 -(((
800 -hostnamectl set-hostname dragino-123456
801 -)))
802 -
803 -[[image:image-20230517102429-1.png]]
804 -
805 -After the configuration is complete, run "reboot" to restart the gateway.
806 -
807 -
808 -= 10. Trouble Shooting =
809 -
810 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
811 -
812 -
813 -[[image:image-20220920135918-1.png]]
814 -
815 -
816 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
817 -
818 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
819 -
820 -
821 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
822 -
823 -**Click the update URL button to configure the URL with the current eth port address.**
824 -
825 -[[image:image-20220920141936-2.png]]
826 -
827 -
828 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
829 -
830 -
831 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
832 -
833 -[[image:image-20230508171607-1.png]]
834 -
835 -
836 -== 10.3  Fallback IP does not work, how can users check ==
837 -
838 -
839 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
840 -
841 -
842 -**1.Check whether the configuration is correct**
843 -
844 -Run the CMD command to ipconfig and ping 172.31.255.254.
845 -
846 -If this fails, the user needs to reconfigure.
847 -
848 -[[image:image-20230413170224-3.png||height="433" width="707"]]
849 -
850 -[[image:image-20230413170246-4.png]]
851 -
852 -
853 -**2. Check whether the firewall is disabled**
854 -
855 -If the firewall is not down, this will affect access to the gateway.
856 -
857 -
858 -== 10.4  Click "Manual_Update", why there is no response? ==
859 -
860 -
861 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
862 -
863 -
864 -[[image:image-20230527090555-3.png||height="660" width="832"]]
865 -
866 -
867 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
868 -
869 -
870 -(((
871 -If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
872 -)))
873 -
874 -(((
875 -With your question as detailed as possible. We will reply and help you in the shortest.
876 -
877 -
878 -= 12. Reference =
879 -
880 -
881 881  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
882 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
883 883  
884 -
885 885  
886 886  )))
887 887  
888 -= 13. Order Info =
358 += **12. Order Info** =
889 889  
890 -
891 891  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
892 892  
893 893  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
894 894  
895 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
896 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
897 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
898 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
899 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
900 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
364 +* **AS923**: LoRaWAN AS923 band
365 +* **AU915**: LoRaWAN AU915 band
366 +* **EU868**: LoRaWAN EU868 band
367 +* **KR920**: LoRaWAN KR920 band
368 +* **US915**: LoRaWAN US915 band
369 +* **IN865**: LoRaWAN IN865 band
901 901  
902 902  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
903 903  
904 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
905 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
906 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
907 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
373 +* ** E**: EMEA, Korea, Thailand, India.
374 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
375 +* ** AU**: Latin America, New Zeland, Taiwan
376 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
908 908  
909 909  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
910 910  
911 911  
912 -= 14. Manufacturer Info =
381 += **13. Manufacturer Info** =
913 913  
914 -
915 915  **Shenzhen Dragino Technology Development co. LTD**
916 916  
917 917  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -919,38 +919,21 @@
919 919  LongCheng Street, LongGang District ; Shenzhen 518116,China
920 920  
921 921  
922 -= 15. FCC Warning =
390 += **14. FCC Warning** =
923 923  
924 -
925 -(((
926 926  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
927 -)))
928 928  
929 -(((
930 930  ~-~- Reorient or relocate the receiving antenna.
931 -)))
932 932  
933 -(((
934 934  ~-~- Increase the separation between the equipment and receiver.
935 -)))
936 936  
937 -(((
938 938  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
939 -)))
940 940  
941 -(((
942 942  ~-~- Consult the dealer or an experienced radio/TV technician for help.
943 -)))
944 944  
945 945  
946 -(((
947 947  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
948 -)))
949 949  
950 950  
951 -(((
952 952  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
953 -
954 -
955 955  )))
956 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220728102000-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -36.4 KB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0