Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 205.3 >
edited by Xiaoling
on 2023/05/27 14:57
To version < 280.1 >
edited by Xiaoye
on 2023/12/01 18:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -81,16 +81,12 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
88 88  
89 89  
90 -
91 -== 1.5 LED Indicators ==
92 -
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
... ... @@ -109,7 +109,7 @@
109 109  (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
110 110  
111 111  
112 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
113 113  
114 114  
115 115  LPS8-V2 has a black toggle button, which is:
... ... @@ -117,14 +117,19 @@
117 117  
118 118  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 119  
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
121 121  
122 122  
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
124 124  
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
126 126  
127 127  
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 +
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 +
128 +
128 128  = 2. Quick Start =
129 129  
130 130  
... ... @@ -133,9 +133,9 @@
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 +== 2.1 Access and Configure LPS8-V2 ==
137 137  
138 -=== 2.1.1 connect the network ===
139 +=== 2.1.1 Find IP address of LPS8-V2 ===
139 139  
140 140  
141 141  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -143,7 +143,7 @@
143 143  
144 144  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 +(% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 148  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 149  
... ... @@ -152,9 +152,7 @@
152 152  [[image:image-20230527085250-2.png||height="495" width="284"]]
153 153  
154 154  
155 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 156  
157 -
158 158  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 159  
160 160  
... ... @@ -183,7 +183,7 @@
183 183  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
184 184  
185 185  
186 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
185 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
187 187  
188 188  
189 189  As in the below photo:
... ... @@ -193,7 +193,7 @@
193 193  
194 194  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 195  
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
195 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
197 197  
198 198  
199 199  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -237,9 +237,9 @@
237 237  
238 238  The account details for Web Login are:
239 239  
240 -(% style="color:#4f81bd" %)**User Name: root**
239 +(% style="color:blue" %)**User Name: root**
241 241  
242 -(% style="color:#4f81bd" %)**Password:   dragino**
241 +(% style="color:blue" %)**Password:   dragino**
243 243  
244 244  [[image:image-20230106153501-1.png||height="367" width="894"]]
245 245  
... ... @@ -252,7 +252,9 @@
252 252  LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 253  
254 254  * **WAN Port Internet Mode**
254 +
255 255  * **WiFi Client Mode**
256 +
256 256  * **Cellular Mode**
257 257  
258 258  === 2.2.2  Use WAN port to access Internet ===
... ... @@ -304,6 +304,7 @@
304 304  
305 305  === 2.2.5  Check Internet connection ===
306 306  
308 +
307 307  In the **home** page, we can check the Internet connection.
308 308  
309 309  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -431,8 +431,9 @@
431 431  
432 432  === 3.4.1 Network ~-~-> WiFi ===
433 433  
436 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
434 434  
435 -[[image:image-20220616114756-4.png||height="251" width="669"]]
438 +[[image:image-20230619095946-1.png||height="332" width="827"]]
436 436  
437 437  
438 438  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -444,7 +444,7 @@
444 444  === 3.4.3 Network ~-~-> Network ===
445 445  
446 446  
447 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
450 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
448 448  
449 449  [[image:image-20230214093657-2.png||height="333" width="858"]]
450 450  
... ... @@ -452,7 +452,7 @@
452 452  === 3.4.4 Network ~-~-> Cellular ===
453 453  
454 454  
455 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
458 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
456 456  
457 457  (% style="color:red" %)**Note: APN cannot be empty.**
458 458  
... ... @@ -459,11 +459,16 @@
459 459  [[image:image-20230228115126-1.png]]
460 460  
461 461  
462 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
463 463  
464 464  [[image:image-20230228115535-2.png||height="478" width="888"]]
465 465  
466 466  
470 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 +
472 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 +
474 +
467 467  == 3.5 System ==
468 468  
469 469  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -471,13 +471,13 @@
471 471  
472 472  Shows the system info:
473 473  
474 -[[image:image-20220917144512-5.png||height="618" width="853"]]
482 +[[image:image-20231031162854-1.png]]
475 475  
476 476  
477 477  === 3.5.2 System ~-~-> System General ===
478 478  
479 479  
480 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
488 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
481 481  
482 482  In addition, Users can customize the FallBack IP address.
483 483  
... ... @@ -487,7 +487,7 @@
487 487  === 3.5.3 System ~-~-> Backup/Restore ===
488 488  
489 489  
490 -[[image:image-20220917144725-6.png||height="208" width="869"]]
498 +[[image:image-20231031162927-2.png]]
491 491  
492 492  
493 493  === 3.5.4 System ~-~-> Remoteit ===
... ... @@ -511,96 +511,65 @@
511 511  
512 512  = 4. Build-in Server =
513 513  
522 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
514 514  
515 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
516 516  
525 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
517 517  
518 -[[image:image-20230214095318-5.png||height="347" width="980"]]
527 +[[image:image-20231106180816-4.png||height="416" width="896"]]
519 519  
529 +[[image:image-20231201165904-1.png||height="466" width="899"]]
520 520  
521 -(% style="color:red" %)**Note:**
531 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
522 522  
523 - **Path**: System ~-~-> Built-in Server
533 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
524 524  
525 525  
526 -**Troubleshooting:**
527 527  
537 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
528 528  
529 -**~ 1. URL does not jump properly**
530 530  
531 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
540 +[[image:image-20230616175558-7.png||height="362" width="894"]]
532 532  
533 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 +[[image:image-20231201170355-2.png||height="536" width="899"]]
534 534  
544 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
535 535  
536 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
537 537  
538 538  
539 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
548 +== **2). Troubleshooting:** ==
540 540  
541 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
542 542  
551 +**~1. If the URL does not jump properly.**
543 543  
544 -Login account:
553 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
545 545  
546 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
555 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
547 547  
548 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
557 +**2. How to install InfluxDB, Garfana.**
549 549  
559 + The LPS8V2 is not pre-installed InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
550 550  
551 -[[image:image-20220725171719-1.png||height="570" width="769"]]
561 +**3. How to upgade the gateway node.js to the latest version.**
552 552  
563 + The user can upgrade nodejs, see [[Upgarde Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
553 553  
554 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
565 +**4. How bath register device on the built-in Chirpstack network server**
555 555  
567 + The user can register devices in batch on the gateway Web UI, see
556 556  
557 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
569 +(% class="wikigeneratedid" id="H4.4A0WhymygatewayisnotChirpstack3F" %)
570 +**5. Why my gateway is not Chirpstack?**
558 558  
559 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
572 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V2 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
560 560  
561 -[[image:image-20230321092456-1.png]]
574 +(% class="wikigeneratedid" id="H4.3A0Howtodisablethebuilt-inserver" %)
575 +**6. How to disable the built-in server**
562 562  
563 -
564 -== 4.2 Application Server ~-~- Node-Red ==
565 -
566 -
567 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
568 -
569 -
570 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
571 -
572 -
573 -[[image:image-20220725172124-3.png||height="610" width="843"]]
574 -
575 -
576 -
577 -=== **Using Node-Red, InfluxDB and Grafana** ===
578 -
579 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
580 -
581 -
582 -the users can refer to this link to install them.
583 -
584 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
585 -
586 -
587 -=== **Upgrade the node.js** ===
588 -
589 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
590 -
591 -
592 -the users can refer to this link to upgrade them.
593 -
594 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
595 -
596 -
597 -== 4.3 How to disable the built-in server ==
598 -
599 -
600 -Use the following commands to start and stop the TTNv3 service:
601 -
602 602  (% class="box infomessage" %)
603 603  (((
579 +Use the following commands to start and stop the TTNv3 service:**     **
580 +
604 604  **# start**
605 605  systemctl start ttnstack
606 606  
... ... @@ -614,10 +614,10 @@
614 614  systemctl disable ttnstack
615 615  )))
616 616  
617 -Use the following commands to start and stop the Node-Red service:
618 -
619 619  (% class="box infomessage" %)
620 620  (((
596 +Use the following commands to start and stop the Node-Red service:
597 +
621 621  **# start**
622 622  systemctl start nodered
623 623  
... ... @@ -632,26 +632,47 @@
632 632  )))
633 633  
634 634  
635 -== 4.4 How to use ChirpStack on LPS8-V2 ==
636 636  
613 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
637 637  
638 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
639 639  
640 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
616 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
641 641  
642 -[[image:image-20230222094908-1.png||height="133" width="798"]]
618 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
643 643  
620 +[[image:image-20230602140406-3.png||height="480" width="918"]]
644 644  
645 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
646 646  
623 +When the configuration is complete, click** "Save&Apply"**.
647 647  
648 648  
626 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
627 +
628 +[[image:image-20230602143122-4.png||height="511" width="983"]]
629 +
630 +
631 += 5. Watch Dog =
632 +
633 +
634 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
635 +
636 +The uses can be via the below method to enable Watch Dog:
637 +
638 +
639 +(% class="box infomessage" %)
640 +(((
641 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
642 +)))
643 +
644 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
645 +
646 +
647 +
649 649  = 6. How users can access LPS8-V2 using serial USB =
650 650  
651 651  
652 652  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
653 653  
654 -
655 655  Port 1 of the UART on the LPS8-V2 is GND
656 656  
657 657  (% class="box infomessage" %)
... ... @@ -663,10 +663,8 @@
663 663  **GND <~-~--> GND (Black line)**
664 664  )))
665 665  
666 -
667 667  **LPS8v2 UART connection photo**
668 668  
669 -
670 670  [[image:image-20230421094319-2.png||height="351" width="392"]]
671 671  
672 672  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -678,138 +678,183 @@
678 678  [[image:image-20220804164747-2.png||height="622" width="594"]]
679 679  
680 680  
681 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
677 += 7. OTA System Update =
682 682  
683 683  
684 -== **Step 1: Configure Frequency Band** ==
680 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
685 685  
686 686  
687 -//Each country has a requirement for frequency region. Choose the right one for your area.//
683 +== 7.1 Auto-update method ==
688 688  
689 -[[image:image-20220905164308-1.png]]
690 690  
686 +The default, each gateway will enable the auto-update function.
691 691  
688 +this function will be triggered every boot and every midnight.
692 692  
693 -== **Step 2: Configure the forward address** ==
694 694  
691 +Users can enable/disable it via Web Page
695 695  
696 -**Select one of the servers to configure.**
693 +[[image:image-20230607094447-2.png]]
697 697  
698 -**For example:**
699 699  
700 -[[image:image-20220905164847-2.png]]
696 +== 7.2 Manual upgrade method ==
701 701  
702 702  
699 +1). Using the Linux command to upgrade the system
703 703  
704 -== **Step 3: Download and Install the Helium-gateway-rs** ==
705 705  
702 +(% class="box infomessage" %)
703 +(((
704 +**apt update && apt install *dragino***
705 +)))
706 706  
707 -**Access the gateway CLI via SSH.**
708 708  
709 -[[image:image-20230425153417-2.png]]
708 +2). Upgrade the system via the Web page button of "Manual Update"
710 710  
711 711  
712 -**Install the new gateway-rs**
711 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
713 713  
714 -(% class="box infomessage" %)
715 -(((
716 -**apt update && apt install helium-gateway**
717 -)))
713 +[[image:image-20230607093849-1.png]]
718 718  
719 -[[image:image-20230425154058-4.png]]
720 720  
721 721  
717 += 8. FAQ =
722 722  
723 -Option: If you installed the older gateway-rs, you have clean it
719 +== 8.1 How to change Hostname ==
724 724  
721 +
722 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
723 +
725 725  (% class="box infomessage" %)
726 726  (((
727 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
726 +hostnamectl set-hostname dragino-123456
728 728  )))
729 729  
730 -[[image:image-20230425153823-3.png]]
729 +[[image:image-20230517102429-1.png]]
731 731  
731 +After the configuration is complete, run "reboot" to restart the gateway.
732 732  
733 -**Change the region setting:**
734 734  
734 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
735 735  
736 -(% class="box infomessage" %)
737 -(((
738 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
739 739  
737 +Migrate guide:
740 740  
741 -**e.g: **
739 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
742 742  
743 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
741 +**2. On the Server ~-~-> Network Server interface, click "Management"**
744 744  
745 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
746 -)))
743 +[[image:image-20230616162454-1.png]]
747 747  
748 748  
749 -**Restart the gateway-rs**
746 +**3. Click "Migrate-Chirpstack"**
750 750  
751 -(% class="box infomessage" %)
752 -(((
753 -**systemctl restart helium_gateway**
754 -)))
748 +[[image:image-20230616162742-2.png]]
755 755  
756 -[[image:image-20230425155612-7.png||height="265" width="911"]]
757 757  
751 +**4. Strat Install **
758 758  
753 +Click start Install and wait until the migration succeeds
759 759  
760 -**Check the helium_gateway running status**
755 +[[image:image-20230616162934-3.png]]
761 761  
762 762  
763 -(% class="box infomessage" %)
764 -(((
765 -**systemctl status helium_gateway**
766 -)))
758 +**5.Migration complete check result**
767 767  
760 +[[image:image-20230616174526-4.png||height="706" width="983"]]
768 768  
769 -[[image:image-20230425154740-5.png]]
770 770  
763 +[[image:image-20230616180004-9.png]]
771 771  
772 772  
773 -**Check the helium_gateway Log：**
766 +== 8.3 How to reduce the 4g data consumed ==
774 774  
768 +
769 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
770 +
771 +[[image:image-20230719100239-1.png||height="724" width="994"]]
772 +
773 +
774 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
775 +
776 +[[image:image-20230719100332-2.png]]
777 +
778 +
779 +3. Disable the auto-update:
780 +
781 +[[image:image-20230719100419-3.png||height="458" width="995"]]
782 +
783 +
784 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
785 +
786 +
775 775  (% class="box infomessage" %)
776 776  (((
777 -**journalctl -u helium_gateway -f**
789 +apt update && apt install helium-gateway
778 778  )))
779 779  
780 780  
781 -[[image:image-20230425155659-8.png]]
793 +== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
782 782  
783 783  
784 -= 8. OTA System Update =
796 +By default, the LPS8v2's built-in server is ChirpStack v4,
785 785  
798 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
786 786  
787 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
800 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
788 788  
789 789  
803 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
790 790  
791 -= 9. FAQ =
792 792  
793 -== 9.1 How to change Hostname ==
806 +== 8.6 How do I view gateway logs ==
794 794  
808 +=== 8.6.1 LoRaWAN Log: ===
795 795  
796 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
810 +==== Semtech UDP Log : ====
797 797  
812 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
813 +
814 +[[image:image-20231017112115-2.png||height="611" width="821"]]
815 +
816 +
817 +==== Station Log: ====
818 +
819 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
820 +
821 +[[image:image-20231017111606-1.png||height="622" width="821"]]
822 +
823 +
824 +=== 8.6.2  4G Log ===
825 +
826 +The user needs to access the Linux console of the gateway and enter the following command:
827 +
798 798  (% class="box infomessage" %)
799 799  (((
800 -hostnamectl set-hostname dragino-123456
830 +cat /var/log/qmilog.txt
801 801  )))
802 802  
803 -[[image:image-20230517102429-1.png]]
833 +[[image:image-20231017114417-3.png||height="543" width="679"]]
804 804  
805 -After the configuration is complete, run "reboot" to restart the gateway.
835 +=== 8.6.3 Dmesg Log ===
806 806  
837 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
807 807  
808 -= 10. Trouble Shooting =
839 +[[image:image-20231017115330-5.png||height="565" width="740"]]
809 809  
810 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
811 811  
842 +=== 8.6.4 Record Log ===
812 812  
844 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
845 +
846 +[[image:image-20231017115124-4.png||height="215" width="880"]]
847 +
848 +
849 += 9. Trouble Shooting =
850 +
851 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
852 +
853 +
813 813  [[image:image-20220920135918-1.png]]
814 814  
815 815  
... ... @@ -825,7 +825,7 @@
825 825  [[image:image-20220920141936-2.png]]
826 826  
827 827  
828 -== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
869 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
829 829  
830 830  
831 831  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
... ... @@ -833,7 +833,7 @@
833 833  [[image:image-20230508171607-1.png]]
834 834  
835 835  
836 -== 10.3  Fallback IP does not work, how can users check ==
877 +== 9.3  Fallback IP does not work, how can users check ==
837 837  
838 838  
839 839  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -855,7 +855,7 @@
855 855  If the firewall is not down, this will affect access to the gateway.
856 856  
857 857  
858 -== 10.4  Click "Manual_Update", why there is no response? ==
899 +== 9.4  Click "Manual_Update", why there is no response? ==
859 859  
860 860  
861 861  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -864,10 +864,40 @@
864 864  [[image:image-20230527090555-3.png||height="660" width="832"]]
865 865  
866 866  
867 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
908 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
868 868  
869 869  
911 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
912 +
913 +
914 +(% class="box infomessage" %)
870 870  (((
916 +apt update && apt install *dragino*
917 +
918 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
919 +)))
920 +
921 +
922 +== 9.6  How to reset the built-in server ==
923 +
924 +
925 +**1) Build-in The Things Network**
926 +
927 +Refer to this link to delete the Built-in server's device.
928 +
929 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
930 +
931 +
932 +**2) Build-in Chirpstack**
933 +
934 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
935 +
936 +[[image:image-20231106180846-5.png||height="310" width="668"]]
937 +
938 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
939 +
940 +
941 +(((
871 871  If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
872 872  )))
873 873  
... ... @@ -875,17 +875,16 @@
875 875  With your question as detailed as possible. We will reply and help you in the shortest.
876 876  
877 877  
878 -= 12. Reference =
949 += 11. Reference =
879 879  
880 880  
881 881  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
882 882  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
883 883  
884 -
885 885  
886 886  )))
887 887  
888 -= 13. Order Info =
958 += 12. Order Info =
889 889  
890 890  
891 891  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -893,23 +893,31 @@
893 893  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
894 894  
895 895  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
966 +
896 896  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
968 +
897 897  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
970 +
898 898  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
972 +
899 899  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
974 +
900 900  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
901 901  
902 902  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
903 903  
904 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
905 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
906 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
907 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
979 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
908 908  
981 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
982 +
983 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
984 +
985 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
986 +
909 909  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
910 910  
911 911  
912 -= 14. Manufacturer Info =
990 += 13. Manufacturer Info =
913 913  
914 914  
915 915  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -919,7 +919,7 @@
919 919  LongCheng Street, LongGang District ; Shenzhen 518116,China
920 920  
921 921  
922 -= 15. FCC Warning =
1000 += 14. FCC Warning =
923 923  
924 924  
925 925  (((
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0