Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 205.2 >
edited by Xiaoling
on 2023/05/27 14:38
To version < 234.1 >
edited by Xiaoye
on 2023/07/19 10:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -81,35 +81,31 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
88 88  
89 89  
90 -
91 -== 1.5 LED Indicators ==
92 -
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
110 110  
111 111  
112 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
113 113  
114 114  
115 115  LPS8-V2 has a black toggle button, which is:
... ... @@ -117,12 +117,12 @@
117 117  
118 118  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 119  
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
121 121  
122 122  
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
124 124  
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
126 126  
127 127  
128 128  = 2. Quick Start =
... ... @@ -133,9 +133,9 @@
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
132 +== 2.1 Access and Configure LPS8-V2 ==
137 137  
138 -=== 2.1.1 connect the network ===
134 +=== 2.1.1 Find IP address of LPS8-V2 ===
139 139  
140 140  
141 141  ==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
... ... @@ -143,7 +143,7 @@
143 143  
144 144  Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
142 +(% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 148  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 149  
... ... @@ -152,9 +152,7 @@
152 152  [[image:image-20230527085250-2.png||height="495" width="284"]]
153 153  
154 154  
155 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 156  
157 -
158 158  ==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 159  
160 160  
... ... @@ -183,7 +183,7 @@
183 183  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
184 184  
185 185  
186 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
187 187  
188 188  
189 189  As in the below photo:
... ... @@ -193,7 +193,7 @@
193 193  
194 194  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 195  
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
197 197  
198 198  
199 199  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -237,9 +237,9 @@
237 237  
238 238  The account details for Web Login are:
239 239  
240 -(% style="color:#4f81bd" %)**User Name: root**
234 +(% style="color:blue" %)**User Name: root**
241 241  
242 -(% style="color:#4f81bd" %)**Password:   dragino**
236 +(% style="color:blue" %)**Password:   dragino**
243 243  
244 244  [[image:image-20230106153501-1.png||height="367" width="894"]]
245 245  
... ... @@ -252,7 +252,9 @@
252 252  LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 253  
254 254  * **WAN Port Internet Mode**
249 +
255 255  * **WiFi Client Mode**
251 +
256 256  * **Cellular Mode**
257 257  
258 258  === 2.2.2  Use WAN port to access Internet ===
... ... @@ -304,6 +304,7 @@
304 304  
305 305  === 2.2.5  Check Internet connection ===
306 306  
303 +
307 307  In the **home** page, we can check the Internet connection.
308 308  
309 309  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -372,7 +372,7 @@
372 372  == 3.1 Home ==
373 373  
374 374  
375 -//Shows the system running status~://
372 +Shows the system running status:
376 376  
377 377  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
378 378  
... ... @@ -382,15 +382,15 @@
382 382  === 3.2.1 LoRa ~-~-> LoRa ===
383 383  
384 384  
385 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
386 386  
387 -//Different LPS8v2 hardware versions can support different frequency ranges~://
384 +Different LPS8v2 hardware versions can support different frequency ranges:
388 388  
389 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
390 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
391 391  
392 392  (% class="wikigeneratedid" %)
393 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
394 394  
395 395  
396 396  (% class="wikigeneratedid" %)
... ... @@ -407,7 +407,7 @@
407 407  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
408 408  
409 409  
410 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
411 411  
412 412  
413 413  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -416,7 +416,7 @@
416 416  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
417 417  
418 418  
419 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
420 420  
421 421  
422 422  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -431,8 +431,9 @@
431 431  
432 432  === 3.4.1 Network ~-~-> WiFi ===
433 433  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
434 434  
435 -[[image:image-20220616114756-4.png||height="251" width="669"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
436 436  
437 437  
438 438  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -444,7 +444,7 @@
444 444  === 3.4.3 Network ~-~-> Network ===
445 445  
446 446  
447 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
448 448  
449 449  [[image:image-20230214093657-2.png||height="333" width="858"]]
450 450  
... ... @@ -452,7 +452,7 @@
452 452  === 3.4.4 Network ~-~-> Cellular ===
453 453  
454 454  
455 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
456 456  
457 457  (% style="color:red" %)**Note: APN cannot be empty.**
458 458  
... ... @@ -459,11 +459,16 @@
459 459  [[image:image-20230228115126-1.png]]
460 460  
461 461  
462 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
463 463  
464 464  [[image:image-20230228115535-2.png||height="478" width="888"]]
465 465  
466 466  
465 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
466 +
467 +Reduce data method
468 +
469 +
467 467  == 3.5 System ==
468 468  
469 469  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -477,7 +477,7 @@
477 477  === 3.5.2 System ~-~-> System General ===
478 478  
479 479  
480 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
483 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
481 481  
482 482  In addition, Users can customize the FallBack IP address.
483 483  
... ... @@ -493,7 +493,7 @@
493 493  === 3.5.4 System ~-~-> Remoteit ===
494 494  
495 495  
496 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
499 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
497 497  
498 498  
499 499  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -504,7 +504,7 @@
504 504  === 3.5.5 System ~-~-> Package Management ===
505 505  
506 506  
507 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
510 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
508 508  
509 509  [[image:image-20230214094316-4.png]]
510 510  
... ... @@ -512,31 +512,35 @@
512 512  = 4. Build-in Server =
513 513  
514 514  
515 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
518 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
516 516  
520 +[[image:image-20230616175617-8.png||height="390" width="894"]]
517 517  
518 -[[image:image-20230214095318-5.png||height="347" width="980"]]
522 +[[image:image-20230616175558-7.png||height="362" width="894"]]
519 519  
520 520  
525 +
521 521  (% style="color:red" %)**Note:**
522 522  
523 - **Path**: System ~-~-> Built-in Server
528 + **Path**: Server ~-~-> Network Server
524 524  
530 + Server ~-~-> Application Server
525 525  
532 +
526 526  **Troubleshooting:**
527 527  
528 528  
529 529  **~ 1. URL does not jump properly**
530 530  
531 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
538 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
532 532  
533 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
540 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
534 534  
535 535  
536 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
543 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
537 537  
538 538  
539 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
546 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
540 540  
541 541  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
542 542  
... ... @@ -543,15 +543,15 @@
543 543  
544 544  Login account:
545 545  
546 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
553 +**Username : ** (% style="background-color:yellow" %)**admin**
547 547  
548 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
555 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
549 549  
557 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
550 550  
551 -[[image:image-20220725171719-1.png||height="570" width="769"]]
552 552  
553 553  
554 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
555 555  
556 556  
557 557  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
... ... @@ -561,6 +561,7 @@
561 561  [[image:image-20230321092456-1.png]]
562 562  
563 563  
571 +
564 564  == 4.2 Application Server ~-~- Node-Red ==
565 565  
566 566  
... ... @@ -635,13 +635,29 @@
635 635  == 4.4 How to use ChirpStack on LPS8-V2 ==
636 636  
637 637  
638 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
646 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
639 639  
640 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
648 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
641 641  
642 -[[image:image-20230222094908-1.png||height="133" width="798"]]
643 643  
651 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
644 644  
653 +
654 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
655 +
656 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
657 +
658 +[[image:image-20230602140406-3.png||height="480" width="918"]]
659 +
660 +
661 +When the configuration is complete, click** "Save&Apply"**.
662 +
663 +
664 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
665 +
666 +[[image:image-20230602143122-4.png||height="511" width="983"]]
667 +
668 +
645 645  = 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
646 646  
647 647  
... ... @@ -651,7 +651,6 @@
651 651  
652 652  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
653 653  
654 -
655 655  Port 1 of the UART on the LPS8-V2 is GND
656 656  
657 657  (% class="box infomessage" %)
... ... @@ -663,10 +663,8 @@
663 663  **GND <~-~--> GND (Black line)**
664 664  )))
665 665  
666 -
667 667  **LPS8v2 UART connection photo**
668 668  
669 -
670 670  [[image:image-20230421094319-2.png||height="351" width="392"]]
671 671  
672 672  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
... ... @@ -678,136 +678,118 @@
678 678  [[image:image-20220804164747-2.png||height="622" width="594"]]
679 679  
680 680  
681 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
702 += 7. OTA System Update =
682 682  
683 683  
684 -== **Step 1: Configure Frequency Band** ==
705 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
685 685  
686 686  
687 -//Each country has a requirement for frequency region. Choose the right one for your area.//
708 +== 7.1 Auto-update method ==
688 688  
689 -[[image:image-20220905164308-1.png]]
690 690  
711 +The default, each gateway will enable the auto-update function.
691 691  
713 +this function will be triggered every boot and every midnight.
692 692  
693 -== **Step 2: Configure the forward address** ==
694 694  
716 +Users can enable/disable it via Web Page
695 695  
696 -**Select one of the servers to configure.**
718 +[[image:image-20230607094447-2.png]]
697 697  
698 -**For example:**
699 699  
700 -[[image:image-20220905164847-2.png]]
721 +== 7.2 Manual upgrade method ==
701 701  
702 702  
724 +1). Using the Linux command to upgrade the system
703 703  
704 -== **Step 3: Download and Install the Helium-gateway-rs** ==
705 705  
706 -
707 -**Access the gateway CLI via SSH.**
708 -
709 -[[image:image-20230425153417-2.png]]
710 -
711 -
712 -**Install the new gateway-rs**
713 -
714 714  (% class="box infomessage" %)
715 715  (((
716 -**apt update && apt install helium-gateway**
729 +**apt update && apt install *dragino***
717 717  )))
718 718  
719 -[[image:image-20230425154058-4.png]]
720 720  
733 +2). Upgrade the system via the Web page button of "Manual Update"
721 721  
722 722  
723 -Option: If you installed the older gateway-rs, you have clean it
736 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
724 724  
725 -(% class="box infomessage" %)
726 -(((
727 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
728 -)))
738 +[[image:image-20230607093849-1.png]]
729 729  
730 -[[image:image-20230425153823-3.png]]
731 731  
732 732  
733 -**Change the region setting:**
742 += 8. FAQ =
734 734  
744 +== 8.1 How to change Hostname ==
735 735  
746 +
747 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
748 +
736 736  (% class="box infomessage" %)
737 737  (((
738 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
751 +hostnamectl set-hostname dragino-123456
752 +)))
739 739  
754 +[[image:image-20230517102429-1.png]]
740 740  
741 -**e.g: **
756 +After the configuration is complete, run "reboot" to restart the gateway.
742 742  
743 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
744 744  
745 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
746 -)))
759 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
747 747  
748 748  
749 -**Restart the gateway-rs**
762 +Migrate guide:
750 750  
751 -(% class="box infomessage" %)
752 -(((
753 -**systemctl restart helium_gateway**
754 -)))
764 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
755 755  
756 -[[image:image-20230425155612-7.png||height="265" width="911"]]
766 +**2. On the Server ~-~-> Network Server interface, click "Management"**
757 757  
768 +[[image:image-20230616162454-1.png]]
758 758  
759 759  
760 -**Check the helium_gateway running status**
771 +**3. Click "Migrate-Chirpstack"**
761 761  
773 +[[image:image-20230616162742-2.png]]
762 762  
763 -(% class="box infomessage" %)
764 -(((
765 -**systemctl status helium_gateway**
766 -)))
767 767  
776 +**4. Strat Install **
768 768  
769 -[[image:image-20230425154740-5.png]]
770 770  
779 +Click start Install and wait until the migration succeeds
771 771  
781 +[[image:image-20230616162934-3.png]]
772 772  
773 -**Check the helium_gateway Log：**
774 774  
775 -(% class="box infomessage" %)
776 -(((
777 -**journalctl -u helium_gateway -f**
778 -)))
784 +**5.Migration complete check result**
779 779  
786 +[[image:image-20230616174526-4.png||height="706" width="983"]]
780 780  
781 -[[image:image-20230425155659-8.png]]
782 782  
789 +[[image:image-20230616180004-9.png]]
783 783  
784 -= 8. OTA System Update =
785 785  
792 +== 8.3 How to reduce the 4g data consumed ==
786 786  
787 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
794 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
788 788  
789 789  
797 +[[image:image-20230719100239-1.png||height="724" width="994"]]
790 790  
791 -= 9. FAQ =
792 792  
793 -== 9.1 How to change Hostname ==
800 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
794 794  
802 +[[image:image-20230719100332-2.png]]
795 795  
796 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
804 +3. Disable the auto-update:
797 797  
798 -(% class="box infomessage" %)
799 -(((
800 -hostnamectl set-hostname dragino-123456
801 -)))
806 +[[image:image-20230719100419-3.png||height="458" width="995"]]
802 802  
803 -[[image:image-20230517102429-1.png]]
804 804  
805 -After the configuration is complete, run "reboot" to restart the gateway.
806 806  
807 807  
808 -= 10. Trouble Shooting =
811 += 9. Trouble Shooting =
809 809  
810 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
813 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
811 811  
812 812  
813 813  [[image:image-20220920135918-1.png]]
... ... @@ -825,14 +825,15 @@
825 825  [[image:image-20220920141936-2.png]]
826 826  
827 827  
828 -== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
831 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
829 829  
833 +
830 830  When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
831 831  
832 832  [[image:image-20230508171607-1.png]]
833 833  
834 834  
835 -== 10.3  Fallback IP does not work, how can users check ==
839 +== 9.3  Fallback IP does not work, how can users check ==
836 836  
837 837  
838 838  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
... ... @@ -854,7 +854,7 @@
854 854  If the firewall is not down, this will affect access to the gateway.
855 855  
856 856  
857 -== 10.4  Click "Manual_Update", why there is no response? ==
861 +== 9.4  Click "Manual_Update", why there is no response? ==
858 858  
859 859  
860 860  When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
... ... @@ -862,18 +862,19 @@
862 862  
863 863  [[image:image-20230527090555-3.png||height="660" width="832"]]
864 864  
865 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
866 866  
870 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
867 867  
872 +
868 868  (((
869 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
874 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
870 870  )))
871 871  
872 872  (((
873 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
878 +With your question as detailed as possible. We will reply and help you in the shortest.
874 874  
875 875  
876 -= 12. Reference =
881 += 11. Reference =
877 877  
878 878  
879 879  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -882,7 +882,7 @@
882 882  
883 883  )))
884 884  
885 -= 13. Order Info =
890 += 12. Order Info =
886 886  
887 887  
888 888  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -890,23 +890,31 @@
890 890  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
891 891  
892 892  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
898 +
893 893  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
900 +
894 894  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
902 +
895 895  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
904 +
896 896  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
906 +
897 897  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
898 898  
899 899  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
900 900  
901 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
902 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
903 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
904 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
911 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
905 905  
913 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
914 +
915 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
916 +
917 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
918 +
906 906  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
907 907  
908 908  
909 -= 14. Manufacturer Info =
922 += 13. Manufacturer Info =
910 910  
911 911  
912 912  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -916,7 +916,7 @@
916 916  LongCheng Street, LongGang District ; Shenzhen 518116,China
917 917  
918 918  
919 -= 15. FCC Warning =
932 += 14. FCC Warning =
920 920  
921 921  
922 922  (((
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0