Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 205.1 >
edited by Kilight Cao
on 2023/05/27 09:09
To version < 115.1 >
edited by Xiaoye
on 2022/11/21 11:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -16,11 +16,12 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,17 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
70 +== **1.3 Features** ==
71 71  
72 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -84,13 +84,14 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
88 88  
89 +== **1.4 Block Diagram** ==
89 89  
90 90  
91 -== 1.5 LED Indicators ==
92 92  
93 +== **1.5 LED Indicators** ==
93 93  
95 +
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
... ... @@ -109,9 +109,10 @@
109 109  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
113 113  
115 +== **1.6 Button Intruction** ==
114 114  
117 +
115 115  LPS8-V2 has a black toggle button, which is:
116 116  
117 117  
... ... @@ -125,41 +125,27 @@
125 125   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 126  
127 127  
128 -= 2. Quick Start =
129 129  
132 += **2. Quick Start** =
130 130  
134 +
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== 2.1.1 connect the network ===
141 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
144 +== **2.1.1 connect the network.** ==
142 142  
143 143  
144 -Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
147 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 -
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -
155 -If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
156 -
157 -
158 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
159 -
160 -
161 161  (((
162 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
151 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
163 163  )))
164 164  
165 165  (((
... ... @@ -170,40 +170,9 @@
170 170  
171 171  
172 172  
173 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
162 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
174 174  
175 175  
176 -[[image:image-20230107084650-2.png||height="310" width="839"]]
177 -
178 -
179 -(% style="color:blue" %)**Steps to connect via fallback IP:**
180 -
181 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
182 -
183 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
184 -
185 -
186 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
187 -
188 -
189 -As in the below photo:
190 -
191 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
192 -
193 -
194 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
195 -
196 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
197 -
198 -
199 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
200 -
201 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
202 -
203 -
204 -
205 -==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
206 -
207 207  [[image:image-20220622100542-2.png||height="369" width="1256"]]
208 208  
209 209  
... ... @@ -223,101 +223,13 @@
223 223  [[image:image-20220622102901-8.png||height="476" width="938"]]
224 224  
225 225  
226 -=== 2.1.2 Access Configure Web UI ===
227 227  
185 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
228 228  
229 -**Web Interface**
230 230  
231 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
188 +=== **2.2.1 Select your area frequency** ===
232 232  
233 233  
234 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
235 -
236 -You will see the login interface of LPS8-V2 as shown below.
237 -
238 -The account details for Web Login are:
239 -
240 -(% style="color:#4f81bd" %)**User Name: root**
241 -
242 -(% style="color:#4f81bd" %)**Password:   dragino**
243 -
244 -[[image:image-20230106153501-1.png||height="367" width="894"]]
245 -
246 -
247 -== 2.2  Typical Network Setup ==
248 -
249 -=== 2.2.1  Overview ===
250 -
251 -
252 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
253 -
254 -* **WAN Port Internet Mode**
255 -* **WiFi Client Mode**
256 -* **Cellular Mode**
257 -
258 -=== 2.2.2  Use WAN port to access Internet ===
259 -
260 -
261 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
262 -
263 -
264 -[[image:image-20230411100633-2.png||height="501" width="935"]]
265 -
266 -
267 -=== 2.2.3  Access the Internet as a WiFi Client ===
268 -
269 -
270 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 -
272 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
273 -
274 -[[image:image-20230411095739-1.png||height="264" width="691"]]
275 -
276 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
277 -
278 -
279 -=== 2.2.4  Use built-in 4G modem for internet access ===
280 -
281 -
282 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
283 -
284 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
285 -
286 -
287 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
288 -
289 -First, install the Micro SIM card as below direction
290 -
291 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
292 -
293 -
294 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
295 -
296 -
297 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
298 -
299 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
300 -
301 -
302 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
303 -
304 -
305 -=== 2.2.5  Check Internet connection ===
306 -
307 -In the **home** page, we can check the Internet connection.
308 -
309 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
310 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
311 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
312 -
313 -[[image:image-20230411101534-3.png||height="544" width="942"]]
314 -
315 -
316 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
317 -
318 -=== 2.3.1 Select your area frequency ===
319 -
320 -
321 321  (((
322 322  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
323 323  
... ... @@ -327,9 +327,10 @@
327 327  [[image:image-20220622103332-9.png||height="485" width="938"]]
328 328  
329 329  
330 -=== 2.3.2 Get the only gateway EUI ===
331 331  
201 +=== **2.2.2 Get the only gateway EUI** ===
332 332  
203 +
333 333  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
334 334  
335 335  
... ... @@ -351,9 +351,10 @@
351 351  [[image:image-20220622103956-12.png]]
352 352  
353 353  
354 -=== 2.3.3 Register the gateway to The Things Network ===
355 355  
226 +== **2.2.3 Register the gateway to The Things Network** ==
356 356  
228 +
357 357  **Login to The Things Network**
358 358  
359 359  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -367,21 +367,25 @@
367 367  **Get it online**
368 368  
369 369  
370 -= 3. Web Configure Pages =
371 371  
372 -== 3.1 Home ==
243 += **3. Web Configure Pages** =
373 373  
374 374  
246 +== **3.1 Home** ==
247 +
248 +
375 375  //Shows the system running status~://
376 376  
377 377  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
378 378  
379 379  
380 -== 3.2 LoRa Settings ==
381 381  
382 -=== 3.2.1 LoRa ~-~-> LoRa ===
255 +== **3.2 LoRa Settings** ==
383 383  
384 384  
258 +=== **3.2.1 LoRa ~-~-> LoRa** ===
259 +
260 +
385 385  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
386 386  
387 387  //Different LPS8v2 hardware versions can support different frequency ranges~://
... ... @@ -402,11 +402,13 @@
402 402  )))
403 403  
404 404  
405 -== 3.3 LoRaWAN Settings ==
406 406  
407 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
282 +== **3.3 LoRaWAN Settings** ==
408 408  
409 409  
285 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
286 +
287 +
410 410  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
411 411  
412 412  
... ... @@ -413,9 +413,10 @@
413 413  [[image:image-20220616111932-2.png||height="516" width="672"]]
414 414  
415 415  
416 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
417 417  
295 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
418 418  
297 +
419 419  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
420 420  
421 421  
... ... @@ -427,95 +427,57 @@
427 427  )))
428 428  
429 429  
430 -== 3.4 Network Settings ==
431 431  
432 -=== 3.4.1 Network ~-~-> WiFi ===
310 +== **3.4 Network Settings** ==
433 433  
434 434  
435 -[[image:image-20220616114756-4.png||height="251" width="669"]]
313 +=== **3.4.1 Network ~-~-> WiFi** ===
436 436  
437 437  
438 -=== 3.4.2 Network ~-~-> System Status ===
316 +[[image:image-20220616114756-4.png||height="251" width="669"]]
439 439  
440 440  
441 -[[image:image-20220820134112-2.png||height="539" width="668"]]
442 442  
320 +=== **3.4.2 Network ~-~-> System Status** ===
443 443  
444 -=== 3.4.3 Network ~-~-> Network ===
445 445  
323 +[[image:image-20220820134112-2.png||height="539" width="668"]]
446 446  
447 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
448 448  
449 -[[image:image-20230214093657-2.png||height="333" width="858"]]
450 450  
327 +=== **3.4.3 Network ~-~-> Firewall** ===
451 451  
452 -=== 3.4.4 Network ~-~-> Cellular ===
453 453  
330 +[[image:image-20220616115351-6.png||height="244" width="661"]]
454 454  
455 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
456 456  
457 -(% style="color:red" %)**Note: APN cannot be empty.**
458 458  
459 -[[image:image-20230228115126-1.png]]
334 +== **3.5 System** ==
460 460  
461 461  
462 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
337 +=== **3.5.1  System ~-~-> System Overview** ===
463 463  
464 -[[image:image-20230228115535-2.png||height="478" width="888"]]
465 465  
466 -
467 -== 3.5 System ==
468 -
469 -=== 3.5.1 System ~-~-> System Overview ===
470 -
471 -
472 472  Shows the system info:
473 473  
474 474  [[image:image-20220917144512-5.png||height="618" width="853"]]
475 475  
476 476  
477 -=== 3.5.2 System ~-~-> System General ===
478 478  
346 +=== **3.5.2 System ~-~-> Backup/Restore** ===
479 479  
480 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
481 481  
482 -In addition, Users can customize the FallBack IP address.
483 -
484 -[[image:image-20230214094058-3.png]]
485 -
486 -
487 -=== 3.5.3 System ~-~-> Backup/Restore ===
488 -
489 -
490 490  [[image:image-20220917144725-6.png||height="208" width="869"]]
491 491  
492 492  
493 -=== 3.5.4 System ~-~-> Remoteit ===
494 494  
353 += **4. Build-in Server** =
495 495  
496 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
497 497  
498 -
499 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
500 -
501 -[[image:image-20221230092303-2.png]]
502 -
503 -
504 -=== 3.5.5 System ~-~-> Package Management ===
505 -
506 -
507 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
508 -
509 -[[image:image-20230214094316-4.png]]
510 -
511 -
512 -= 4. Build-in Server =
513 -
514 -
515 515  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
516 516  
517 517  
518 -[[image:image-20230214095318-5.png||height="347" width="980"]]
359 +[[image:image-20220820115644-1.png||height="217" width="778"]]
519 519  
520 520  
521 521  (% style="color:red" %)**Note:**
... ... @@ -533,9 +533,10 @@
533 533   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
534 534  
535 535  
536 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
537 537  
378 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
538 538  
380 +
539 539  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
540 540  
541 541  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -551,19 +551,10 @@
551 551  [[image:image-20220725171719-1.png||height="570" width="769"]]
552 552  
553 553  
554 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
555 555  
397 +== **4.2 Application Server ~-~- Node-Red** ==
556 556  
557 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
558 558  
559 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
560 -
561 -[[image:image-20230321092456-1.png]]
562 -
563 -
564 -== 4.2 Application Server ~-~- Node-Red ==
565 -
566 -
567 567  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
568 568  
569 569  
... ... @@ -574,88 +574,18 @@
574 574  
575 575  
576 576  
577 -=== **Using Node-Red, InfluxDB and Grafana** ===
578 578  
579 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
580 580  
412 += **5. How users can access LPS8v2 using serial USB** =
581 581  
582 -the users can refer to this link to install them.
583 583  
584 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
415 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
585 585  
586 586  
587 -=== **Upgrade the node.js** ===
418 +Port 1 of the UART on the LPS8v2 is GND
588 588  
589 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
590 -
591 -
592 -the users can refer to this link to upgrade them.
593 -
594 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
595 -
596 -
597 -== 4.3 How to disable the built-in server ==
598 -
599 -
600 -Use the following commands to start and stop the TTNv3 service:
601 -
602 602  (% class="box infomessage" %)
603 603  (((
604 -**# start**
605 -systemctl start ttnstack
606 -
607 -**# stop**
608 -systemctl stop ttnstack
609 -
610 -**# enable**
611 -systemctl enable ttnstack
612 -
613 -**#disable**
614 -systemctl disable ttnstack
615 -)))
616 -
617 -Use the following commands to start and stop the Node-Red service:
618 -
619 -(% class="box infomessage" %)
620 -(((
621 -**# start**
622 -systemctl start nodered
623 -
624 -**# stop**
625 -systemctl stop nodered
626 -
627 -**# enable**
628 -systemctl enable nodered
629 -
630 -**#disable**
631 -systemctl disable nodered
632 -)))
633 -
634 -
635 -== 4.4 How to use ChirpStack on LPS8-V2 ==
636 -
637 -
638 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
639 -
640 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
641 -
642 -[[image:image-20230222094908-1.png||height="133" width="798"]]
643 -
644 -
645 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
646 -
647 -
648 -
649 -= 6. How users can access LPS8-V2 using serial USB =
650 -
651 -
652 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
653 -
654 -
655 -Port 1 of the UART on the LPS8-V2 is GND
656 -
657 -(% class="box infomessage" %)
658 -(((
659 659  **TXD  <~-~--> UART RXD (Gray line)**
660 660  
661 661  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -666,9 +666,10 @@
666 666  
667 667  **LPS8v2 UART connection photo**
668 668  
432 +[[image:image-20220804163015-1.png||height="621" width="466"]]
669 669  
670 -[[image:image-20230421094319-2.png||height="351" width="392"]]
671 671  
435 +
672 672  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
673 673  
674 674  
... ... @@ -678,9 +678,10 @@
678 678  [[image:image-20220804164747-2.png||height="622" width="594"]]
679 679  
680 680  
681 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
682 682  
446 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
683 683  
448 +
684 684  == **Step 1: Configure Frequency Band** ==
685 685  
686 686  
... ... @@ -706,72 +706,59 @@
706 706  
707 707  **Access the gateway CLI via SSH.**
708 708  
709 -[[image:image-20230425153417-2.png]]
474 +[[image:image-20220905165222-3.png]]
710 710  
711 711  
712 -**Install the new gateway-rs**
477 +**Download gateway-rs.**
713 713  
479 +[[image:image-20220905165715-5.png]]
480 +
714 714  (% class="box infomessage" %)
715 715  (((
716 -**apt update && apt install helium-gateway**
483 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
717 717  )))
718 718  
719 -[[image:image-20230425154058-4.png]]
720 720  
487 +**Install gateway-rs.**
721 721  
489 +[[image:image-20220905165917-7.png]]
722 722  
723 -Option: If you installed the older gateway-rs, you have clean it
724 -
725 725  (% class="box infomessage" %)
726 726  (((
727 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
493 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
728 728  )))
729 729  
730 -[[image:image-20230425153823-3.png]]
731 731  
497 +**Modify configuration.**
732 732  
733 -**Change the region setting:**
734 734  
500 +[[image:image-20220905173847-12.png]]
735 735  
736 -(% class="box infomessage" %)
737 -(((
738 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
739 739  
740 -
741 -**e.g: **
742 -
743 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
744 -
745 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
746 -)))
747 -
748 -
749 -**Restart the gateway-rs**
750 -
751 751  (% class="box infomessage" %)
752 752  (((
753 -**systemctl restart helium_gateway**
505 +**region=<Enter regional parameters> \
506 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
507 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
754 754  )))
755 755  
756 -[[image:image-20230425155612-7.png||height="265" width="911"]]
757 757  
511 +**Restart the helium_gateway**
758 758  
513 +[[image:image-20220905170920-9.png]]
759 759  
760 -**Check the helium_gateway running status**
761 761  
762 -
763 763  (% class="box infomessage" %)
764 764  (((
765 -**systemctl status helium_gateway**
518 +**systemctl restart helium_gateway**
766 766  )))
767 767  
768 768  
769 -[[image:image-20230425154740-5.png]]
522 +**Check the helium_gateway Log：**
770 770  
524 +[[image:image-20220905173952-13.png]]
771 771  
772 772  
773 -**Check the helium_gateway Log：**
774 -
775 775  (% class="box infomessage" %)
776 776  (((
777 777  **journalctl -u helium_gateway -f**
... ... @@ -778,38 +778,23 @@
778 778  )))
779 779  
780 780  
781 -[[image:image-20230425155659-8.png]]
533 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
782 782  
535 +where the helium gateway log is shown:
783 783  
784 -= 8. OTA System Update =
537 +[[image:image-20220905174534-14.png]]
785 785  
786 786  
787 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
540 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
788 788  
789 789  
790 790  
791 -= 9. FAQ =
544 += **7. Trouble Shooting** =
792 792  
793 -== 9.1 How to change Hostname ==
794 794  
547 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
795 795  
796 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
797 797  
798 -(% class="box infomessage" %)
799 -(((
800 -hostnamectl set-hostname dragino-123456
801 -)))
802 -
803 -[[image:image-20230517102429-1.png]]
804 -
805 -After the configuration is complete, run "reboot" to restart the gateway.
806 -
807 -
808 -= 10. Trouble Shooting =
809 -
810 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
811 -
812 -
813 813  [[image:image-20220920135918-1.png]]
814 814  
815 815  
... ... @@ -825,46 +825,11 @@
825 825  [[image:image-20220920141936-2.png]]
826 826  
827 827  
828 -== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
829 829  
830 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
831 831  
832 -[[image:image-20230508171607-1.png]]
567 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
833 833  
834 834  
835 -== 10.3  Fallback IP does not work, how can users check ==
836 -
837 -
838 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
839 -
840 -
841 -**1.Check whether the configuration is correct**
842 -
843 -Run the CMD command to ipconfig and ping 172.31.255.254.
844 -
845 -If this fails, the user needs to reconfigure.
846 -
847 -[[image:image-20230413170224-3.png||height="433" width="707"]]
848 -
849 -[[image:image-20230413170246-4.png]]
850 -
851 -
852 -**2. Check whether the firewall is disabled**
853 -
854 -If the firewall is not down, this will affect access to the gateway.
855 -
856 -
857 -== 10.4  Click "Manual_Update", why there is no response? ==
858 -
859 -
860 -When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
861 -
862 -
863 -[[image:image-20230527090555-3.png||height="660" width="832"]]
864 -
865 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
866 -
867 -
868 868  (((
869 869  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
870 870  )))
... ... @@ -873,9 +873,10 @@
873 873  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
874 874  
875 875  
876 -= 12. Reference =
877 877  
579 += **9. Reference** =
878 878  
581 +
879 879  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
880 880  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
881 881  
... ... @@ -882,7 +882,7 @@
882 882  
883 883  )))
884 884  
885 -= 13. Order Info =
588 += **10. Order Info** =
886 886  
887 887  
888 888  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -906,9 +906,10 @@
906 906  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
907 907  
908 908  
909 -= 14. Manufacturer Info =
910 910  
613 += **10. Manufacturer Info** =
911 911  
615 +
912 912  **Shenzhen Dragino Technology Development co. LTD**
913 913  
914 914  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -916,9 +916,10 @@
916 916  LongCheng Street, LongGang District ; Shenzhen 518116,China
917 917  
918 918  
919 -= 15. FCC Warning =
920 920  
624 += **11. FCC Warning** =
921 921  
626 +
922 922  (((
923 923  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
924 924  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0