Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 204.1 >
edited by Kilight Cao
on 2023/05/27 09:05
To version < 69.8 >
edited by Xiaoling
on 2022/07/28 17:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -52,23 +52,29 @@
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
53 +
54 +
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
61 +
62 +
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
71 +
72 +
73 +== **1.3 Features** ==
74 +
75 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -84,125 +84,91 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
92 92  
95 +== **1.4 Block Diagram** ==
93 93  
94 -LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
99 +== **1.5 LED Indicators** ==
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
102 +LPS8-V2 has totally four LEDs, They are:
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
105 +(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
108 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
111 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
113 113  
113 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
114 114  
115 -LPS8-V2 has a black toggle button, which is:
115 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
116 116  
117 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
117 117  
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 119  
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
121 121  
122 122  
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 124  
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
124 += **2. Quick Start** =
126 126  
127 127  
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== 2.1.1 connect the network ===
133 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
136 +== **2.1.1 connect the network.** ==
142 142  
138 +=== ===
143 143  
144 -Since software version 230524,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
140 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
143 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 149  
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
155 -
156 -
157 -(((
158 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
159 -)))
160 -
161 -(((
162 162  You can also use this IP to connect.
163 -)))
164 164  
165 165  [[image:image-20220622100129-1.png||height="332" width="1263"]]
166 166  
167 167  
168 168  
169 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
151 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
170 170  
171 171  
172 -[[image:image-20230107084650-2.png||height="310" width="839"]]
154 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
173 173  
174 174  
175 -(% style="color:blue" %)**Steps to connect via fallback IP:**
157 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
176 176  
177 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
178 178  
179 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
180 180  
161 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
181 181  
182 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
163 +1. Connect PC's Ethernet port to LPS8-V2's WAN port
183 183  
165 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
184 184  
185 -As in the below photo:
167 +[[image:image-20220622101433-4.png]]
186 186  
187 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
188 188  
170 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
189 189  
190 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
191 191  
192 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
173 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
193 193  
194 194  
195 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
196 -
197 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
198 -
199 -
200 -
201 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
202 -
203 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
204 -
205 -
206 206  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
207 207  
208 208  
... ... @@ -216,122 +216,30 @@
216 216  [[image:image-20220622102847-7.png]]
217 217  
218 218  
219 -[[image:image-20220622102901-8.png||height="476" width="938"]]
189 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
220 220  
221 221  
222 -=== 2.1.2 Access Configure Web UI ===
223 223  
193 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
224 224  
225 -**Web Interface**
226 226  
227 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
196 +=== **2.2.1 Select your area frequency** ===
228 228  
229 229  
230 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
231 -
232 -You will see the login interface of LPS8-V2 as shown below.
233 -
234 -The account details for Web Login are:
235 -
236 -(% style="color:#4f81bd" %)**User Name: root**
237 -
238 -(% style="color:#4f81bd" %)**Password:   dragino**
239 -
240 -[[image:image-20230106153501-1.png||height="367" width="894"]]
241 -
242 -
243 -== 2.2  Typical Network Setup ==
244 -
245 -=== 2.2.1  Overview ===
246 -
247 -
248 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
249 -
250 -* **WAN Port Internet Mode**
251 -* **WiFi Client Mode**
252 -* **Cellular Mode**
253 -
254 -=== 2.2.2  Use WAN port to access Internet ===
255 -
256 -
257 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 -
259 -
260 -[[image:image-20230411100633-2.png||height="501" width="935"]]
261 -
262 -
263 -=== 2.2.3  Access the Internet as a WiFi Client ===
264 -
265 -
266 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 -
268 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 -
270 -[[image:image-20230411095739-1.png||height="264" width="691"]]
271 -
272 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 -
274 -
275 -=== 2.2.4  Use built-in 4G modem for internet access ===
276 -
277 -
278 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 -
280 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 -
282 -
283 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 -
285 -First, install the Micro SIM card as below direction
286 -
287 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 -
289 -
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 -
292 -
293 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 -
295 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 -
300 -
301 -=== 2.2.5  Check Internet connection ===
302 -
303 -In the **home** page, we can check the Internet connection.
304 -
305 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
306 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
307 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
308 -
309 -[[image:image-20230411101534-3.png||height="544" width="942"]]
310 -
311 -
312 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
313 -
314 -=== 2.3.1 Select your area frequency ===
315 -
316 -
317 -(((
318 318  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
319 319  
320 -
321 -)))
201 +[[image:image-20220622103332-9.png]]
322 322  
323 -[[image:image-20220622103332-9.png||height="485" width="938"]]
324 324  
325 325  
326 -=== 2.3.2 Get the only gateway EUI ===
205 +=== **2.2.2 Get the only gateway EUI** ===
327 327  
328 328  
329 329  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
330 330  
210 +[[image:image-20220622103355-10.png]]
331 331  
332 -[[image:image-20220622103355-10.png||height="698" width="949"]]
333 333  
334 -
335 335  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
336 336  
337 337  
... ... @@ -347,9 +347,10 @@
347 347  [[image:image-20220622103956-12.png]]
348 348  
349 349  
350 -=== 2.3.3 Register the gateway to The Things Network ===
351 351  
229 +== 2.2.3 Register the gateway to The Things Network ==
352 352  
231 +
353 353  **Login to The Things Network**
354 354  
355 355  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -363,19 +363,20 @@
363 363  **Get it online**
364 364  
365 365  
366 -= 3. Web Configure Pages =
367 367  
368 -== 3.1 Home ==
246 += **3. Web Configure Pages** =
369 369  
370 370  
249 +== **3.1 Home** ==
250 +
251 +
371 371  //Shows the system running status~://
372 372  
373 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
374 374  
255 +== **3.2 LoRa Settings** ==
375 375  
376 -== 3.2 LoRa Settings ==
377 377  
378 -=== 3.2.1 LoRa ~-~-> LoRa ===
258 +=== **3.2.1 LoRa ~-~-> LoRa** ===
379 379  
380 380  
381 381  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -382,158 +382,95 @@
382 382  
383 383  //Different LPS8v2 hardware versions can support different frequency ranges~://
384 384  
385 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
265 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
386 386  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
387 387  
388 388  (% class="wikigeneratedid" %)
389 389  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 390  
391 -
392 392  (% class="wikigeneratedid" %)
393 393  [[image:image-20220616110739-1.png||height="372" width="682"]]
394 394  
395 395  
396 396  (((
397 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
276 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
398 398  )))
399 399  
400 400  
401 -== 3.3 LoRaWAN Settings ==
402 402  
403 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
281 +== **3.3 LoRaWAN Settings** ==
404 404  
405 405  
406 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
284 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
407 407  
408 408  
287 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
288 +
409 409  [[image:image-20220616111932-2.png||height="516" width="672"]]
410 410  
411 411  
412 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
413 413  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
414 414  
295 +
415 415  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 416  
417 -
418 418  [[image:image-20220616113246-3.png||height="396" width="672"]]
419 419  
420 420  
421 -(((
422 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
423 -)))
301 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
424 424  
425 425  
426 -== 3.4 Network Settings ==
427 427  
428 -=== 3.4.1 Network ~-~-> WiFi ===
305 +== **3.4 Network Settings** ==
429 429  
430 430  
431 -[[image:image-20220616114756-4.png||height="251" width="669"]]
308 +=== **3.4.1 Network ~-~-> WiFi** ===
432 432  
433 433  
434 -=== 3.4.2 Network ~-~-> System Status ===
311 +[[image:image-20220616114756-4.png||height="251" width="669"]]
435 435  
436 436  
437 -[[image:image-20220820134112-2.png||height="539" width="668"]]
438 438  
315 +=== **3.4.2 Network ~-~-> System Status** ===
439 439  
440 -=== 3.4.3 Network ~-~-> Network ===
441 441  
318 +[[image:image-20220616115229-5.png||height="548" width="665"]]
442 442  
443 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
444 444  
445 -[[image:image-20230214093657-2.png||height="333" width="858"]]
446 446  
322 +=== **3.4.3 Network ~-~-> Firewall** ===
447 447  
448 -=== 3.4.4 Network ~-~-> Cellular ===
449 449  
325 +[[image:image-20220616115351-6.png||height="244" width="661"]]
450 450  
451 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
452 452  
453 -(% style="color:red" %)**Note: APN cannot be empty.**
454 454  
455 -[[image:image-20230228115126-1.png]]
329 +== **3.5 System** ==
456 456  
457 457  
458 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
332 +=== **3.5.1  System ~-~-> System Overview** ===
459 459  
460 -[[image:image-20230228115535-2.png||height="478" width="888"]]
461 461  
462 -
463 -== 3.5 System ==
464 -
465 -=== 3.5.1 System ~-~-> System Overview ===
466 -
467 -
468 468  Shows the system info:
469 469  
470 -[[image:image-20220917144512-5.png||height="618" width="853"]]
471 471  
472 472  
473 -=== 3.5.2 System ~-~-> System General ===
339 +=== **3.5.2 System ~-~-> Backup/Restore** ===
474 474  
475 475  
476 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
342 +[[image:image-20220616115808-7.png||height="194" width="649"]]
477 477  
478 -In addition, Users can customize the FallBack IP address.
479 479  
480 -[[image:image-20230214094058-3.png]]
481 481  
346 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
482 482  
483 -=== 3.5.3 System ~-~-> Backup/Restore ===
484 484  
349 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
485 485  
486 -[[image:image-20220917144725-6.png||height="208" width="869"]]
351 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
487 487  
488 488  
489 -=== 3.5.4 System ~-~-> Remoteit ===
490 -
491 -
492 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
493 -
494 -
495 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
496 -
497 -[[image:image-20221230092303-2.png]]
498 -
499 -
500 -=== 3.5.5 System ~-~-> Package Management ===
501 -
502 -
503 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
504 -
505 -[[image:image-20230214094316-4.png]]
506 -
507 -
508 -= 4. Build-in Server =
509 -
510 -
511 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
512 -
513 -
514 -[[image:image-20230214095318-5.png||height="347" width="980"]]
515 -
516 -
517 -(% style="color:red" %)**Note:**
518 -
519 - **Path**: System ~-~-> Built-in Server
520 -
521 -
522 -**Troubleshooting:**
523 -
524 -
525 -**~ 1. URL does not jump properly**
526 -
527 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
528 -
529 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
530 -
531 -
532 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
533 -
534 -
535 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
536 -
537 537  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
538 538  
539 539  
... ... @@ -547,313 +547,52 @@
547 547  [[image:image-20220725171719-1.png||height="570" width="769"]]
548 548  
549 549  
550 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
367 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
368 + You can complete the installation manually with the following command.**
551 551  
552 552  
553 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
554 -
555 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
556 -
557 -[[image:image-20230321092456-1.png]]
558 -
559 -
560 -== 4.2 Application Server ~-~- Node-Red ==
561 -
562 -
563 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
564 -
565 -
566 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
567 -
568 -
569 -[[image:image-20220725172124-3.png||height="610" width="843"]]
570 -
571 -
572 -
573 -=== **Using Node-Red, InfluxDB and Grafana** ===
574 -
575 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
576 -
577 -
578 -the users can refer to this link to install them.
579 -
580 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
581 -
582 -
583 -=== **Upgrade the node.js** ===
584 -
585 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
586 -
587 -
588 -the users can refer to this link to upgrade them.
589 -
590 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
591 -
592 -
593 -== 4.3 How to disable the built-in server ==
594 -
595 -
596 -Use the following commands to start and stop the TTNv3 service:
597 -
598 598  (% class="box infomessage" %)
599 599  (((
600 -**# start**
601 -systemctl start ttnstack
373 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
602 602  
603 -**# stop**
604 -systemctl stop ttnstack
605 -
606 -**# enable**
607 -systemctl enable ttnstack
608 -
609 -**#disable**
610 -systemctl disable ttnstack
375 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
611 611  )))
612 612  
613 -Use the following commands to start and stop the Node-Red service:
614 614  
615 -(% class="box infomessage" %)
616 -(((
617 -**# start**
618 -systemctl start nodered
619 619  
620 -**# stop**
621 -systemctl stop nodered
380 += **5. Build-in Application Server ~-~- Node-Red** =
622 622  
623 -**# enable**
624 -systemctl enable nodered
625 625  
626 -**#disable**
627 -systemctl disable nodered
628 -)))
383 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
629 629  
385 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
630 630  
631 -== 4.4 How to use ChirpStack on LPS8-V2 ==
632 632  
388 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
633 633  
634 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
635 635  
636 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
391 +[[image:image-20220725172124-3.png||height="610" width="843"]]
637 637  
638 -[[image:image-20230222094908-1.png||height="133" width="798"]]
639 639  
394 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
395 + You can complete the installation manually with the following command.**
640 640  
641 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
642 642  
643 643  
644 -
645 -= 6. How users can access LPS8-V2 using serial USB =
646 -
647 -
648 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
649 -
650 -
651 -Port 1 of the UART on the LPS8-V2 is GND
652 -
653 653  (% class="box infomessage" %)
654 654  (((
655 -**TXD  <~-~--> UART RXD (Gray line)**
656 -
657 -**RXD  <~-~--> UART TXD (White line)**
658 -
659 -**GND <~-~--> GND (Black line)**
401 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
660 660  )))
661 661  
405 +[[image:image-20220728102000-1.png]]
662 662  
663 -**LPS8v2 UART connection photo**
664 664  
665 665  
666 -[[image:image-20230421094319-2.png||height="351" width="392"]]
409 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
667 667  
668 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
669 669  
670 -
671 -[[image:image-20220804164928-3.png||height="320" width="332"]]
672 -
673 -
674 -[[image:image-20220804164747-2.png||height="622" width="594"]]
675 -
676 -
677 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
678 -
679 -
680 -== **Step 1: Configure Frequency Band** ==
681 -
682 -
683 -//Each country has a requirement for frequency region. Choose the right one for your area.//
684 -
685 -[[image:image-20220905164308-1.png]]
686 -
687 -
688 -
689 -== **Step 2: Configure the forward address** ==
690 -
691 -
692 -**Select one of the servers to configure.**
693 -
694 -**For example:**
695 -
696 -[[image:image-20220905164847-2.png]]
697 -
698 -
699 -
700 -== **Step 3: Download and Install the Helium-gateway-rs** ==
701 -
702 -
703 -**Access the gateway CLI via SSH.**
704 -
705 -[[image:image-20230425153417-2.png]]
706 -
707 -
708 -**Install the new gateway-rs**
709 -
710 -(% class="box infomessage" %)
711 711  (((
712 -**apt update && apt install helium-gateway**
713 -)))
714 -
715 -[[image:image-20230425154058-4.png]]
716 -
717 -
718 -
719 -Option: If you installed the older gateway-rs, you have clean it
720 -
721 -(% class="box infomessage" %)
722 -(((
723 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
724 -)))
725 -
726 -[[image:image-20230425153823-3.png]]
727 -
728 -
729 -**Change the region setting:**
730 -
731 -
732 -(% class="box infomessage" %)
733 -(((
734 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
735 -
736 -
737 -**e.g: **
738 -
739 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
740 -
741 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
742 -)))
743 -
744 -
745 -**Restart the gateway-rs**
746 -
747 -(% class="box infomessage" %)
748 -(((
749 -**systemctl restart helium_gateway**
750 -)))
751 -
752 -[[image:image-20230425155612-7.png||height="265" width="911"]]
753 -
754 -
755 -
756 -**Check the helium_gateway running status**
757 -
758 -
759 -(% class="box infomessage" %)
760 -(((
761 -**systemctl status helium_gateway**
762 -)))
763 -
764 -
765 -[[image:image-20230425154740-5.png]]
766 -
767 -
768 -
769 -**Check the helium_gateway Log：**
770 -
771 -(% class="box infomessage" %)
772 -(((
773 -**journalctl -u helium_gateway -f**
774 -)))
775 -
776 -
777 -[[image:image-20230425155659-8.png]]
778 -
779 -
780 -= 8. OTA System Update =
781 -
782 -
783 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
784 -
785 -
786 -
787 -= 9. FAQ =
788 -
789 -== 9.1 How to change Hostname ==
790 -
791 -
792 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
793 -
794 -(% class="box infomessage" %)
795 -(((
796 -hostnamectl set-hostname dragino-123456
797 -)))
798 -
799 -[[image:image-20230517102429-1.png]]
800 -
801 -After the configuration is complete, run "reboot" to restart the gateway.
802 -
803 -
804 -= 10. Trouble Shooting =
805 -
806 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
807 -
808 -
809 -[[image:image-20220920135918-1.png]]
810 -
811 -
812 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
813 -
814 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
815 -
816 -
817 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
818 -
819 -**Click the update URL button to configure the URL with the current eth port address.**
820 -
821 -[[image:image-20220920141936-2.png]]
822 -
823 -
824 -== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
825 -
826 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
827 -
828 -[[image:image-20230508171607-1.png]]
829 -
830 -
831 -== 10.3  Fallback IP does not work, how can users check ==
832 -
833 -
834 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
835 -
836 -
837 -**1.Check whether the configuration is correct**
838 -
839 -Run the CMD command to ipconfig and ping 172.31.255.254.
840 -
841 -If this fails, the user needs to reconfigure.
842 -
843 -[[image:image-20230413170224-3.png||height="433" width="707"]]
844 -
845 -[[image:image-20230413170246-4.png]]
846 -
847 -
848 -**2. Check whether the firewall is disabled**
849 -
850 -If the firewall is not down, this will affect access to the gateway.
851 -
852 -
853 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
854 -
855 -
856 -(((
857 857  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
858 858  )))
859 859  
... ... @@ -861,16 +861,16 @@
861 861  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
862 862  
863 863  
864 -= 12. Reference =
865 865  
421 += **11 Reference** =
866 866  
423 +
867 867  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
868 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
869 869  
870 870  
871 871  )))
872 872  
873 -= 13. Order Info =
429 += **12. Order Info** =
874 874  
875 875  
876 876  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -884,6 +884,7 @@
884 884  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 885  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
886 886  
443 +
887 887  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
888 888  
889 889  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -894,9 +894,10 @@
894 894  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
895 895  
896 896  
897 -= 14. Manufacturer Info =
898 898  
455 += **13. Manufacturer Info** =
899 899  
457 +
900 900  **Shenzhen Dragino Technology Development co. LTD**
901 901  
902 902  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -904,38 +904,23 @@
904 904  LongCheng Street, LongGang District ; Shenzhen 518116,China
905 905  
906 906  
907 -= 15. FCC Warning =
908 908  
466 += **14. FCC Warning** =
909 909  
910 -(((
468 +
911 911  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
912 -)))
913 913  
914 -(((
915 915  ~-~- Reorient or relocate the receiving antenna.
916 -)))
917 917  
918 -(((
919 919  ~-~- Increase the separation between the equipment and receiver.
920 -)))
921 921  
922 -(((
923 923  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
924 -)))
925 925  
926 -(((
927 927  ~-~- Consult the dealer or an experienced radio/TV technician for help.
928 -)))
929 929  
930 930  
931 -(((
932 932  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
933 -)))
934 934  
935 935  
936 -(((
937 937  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
938 -
939 -
940 940  )))
941 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -52.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0