Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 203.1 >
edited by Kilight Cao
on 2023/05/27 08:54
To version < 116.1 >
edited by Xiaoye
on 2022/11/21 11:30
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -16,11 +16,12 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -84,11 +84,11 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
91 +== **1.5 LED Indicators** ==
92 92  
93 93  
94 94  LPS8-V2 has totally four LEDs, They are:
... ... @@ -109,9 +109,10 @@
109 109  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
113 113  
113 +== **1.6 Button Intruction** ==
114 114  
115 +
115 115  LPS8-V2 has a black toggle button, which is:
116 116  
117 117  
... ... @@ -125,37 +125,27 @@
125 125   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 126  
127 127  
128 -= 2. Quick Start =
129 129  
130 += **2. Quick Start** =
130 130  
132 +
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== 2.1.1 connect the network ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 +== **2.1.1 connect the network.** ==
142 142  
143 143  
144 -Since software version 230524,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
145 145  
146 - (% style="background-color:yellow" %)**dragino+dragino**
147 147  
148 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 -
150 -[[image:image-20230527084515-1.png]]
151 -
152 -[[image:image-20230527085250-2.png||height="495" width="284"]]
153 -
154 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
155 -
156 -
157 157  (((
158 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
159 159  )))
160 160  
161 161  (((
... ... @@ -166,40 +166,9 @@
166 166  
167 167  
168 168  
169 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
170 170  
171 171  
172 -[[image:image-20230107084650-2.png||height="310" width="839"]]
173 -
174 -
175 -(% style="color:blue" %)**Steps to connect via fallback IP:**
176 -
177 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
178 -
179 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
180 -
181 -
182 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
183 -
184 -
185 -As in the below photo:
186 -
187 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
188 -
189 -
190 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
191 -
192 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
193 -
194 -
195 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
196 -
197 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
198 -
199 -
200 -
201 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
202 -
203 203  [[image:image-20220622100542-2.png||height="369" width="1256"]]
204 204  
205 205  
... ... @@ -219,101 +219,13 @@
219 219  [[image:image-20220622102901-8.png||height="476" width="938"]]
220 220  
221 221  
222 -=== 2.1.2 Access Configure Web UI ===
223 223  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
224 224  
225 -**Web Interface**
226 226  
227 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
228 228  
229 229  
230 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
231 -
232 -You will see the login interface of LPS8-V2 as shown below.
233 -
234 -The account details for Web Login are:
235 -
236 -(% style="color:#4f81bd" %)**User Name: root**
237 -
238 -(% style="color:#4f81bd" %)**Password:   dragino**
239 -
240 -[[image:image-20230106153501-1.png||height="367" width="894"]]
241 -
242 -
243 -== 2.2  Typical Network Setup ==
244 -
245 -=== 2.2.1  Overview ===
246 -
247 -
248 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
249 -
250 -* **WAN Port Internet Mode**
251 -* **WiFi Client Mode**
252 -* **Cellular Mode**
253 -
254 -=== 2.2.2  Use WAN port to access Internet ===
255 -
256 -
257 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 -
259 -
260 -[[image:image-20230411100633-2.png||height="501" width="935"]]
261 -
262 -
263 -=== 2.2.3  Access the Internet as a WiFi Client ===
264 -
265 -
266 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 -
268 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 -
270 -[[image:image-20230411095739-1.png||height="264" width="691"]]
271 -
272 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 -
274 -
275 -=== 2.2.4  Use built-in 4G modem for internet access ===
276 -
277 -
278 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 -
280 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 -
282 -
283 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 -
285 -First, install the Micro SIM card as below direction
286 -
287 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 -
289 -
290 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 -
292 -
293 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 -
295 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 -
297 -
298 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 -
300 -
301 -=== 2.2.5  Check Internet connection ===
302 -
303 -In the **home** page, we can check the Internet connection.
304 -
305 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
306 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
307 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
308 -
309 -[[image:image-20230411101534-3.png||height="544" width="942"]]
310 -
311 -
312 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
313 -
314 -=== 2.3.1 Select your area frequency ===
315 -
316 -
317 317  (((
318 318  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
319 319  
... ... @@ -323,9 +323,10 @@
323 323  [[image:image-20220622103332-9.png||height="485" width="938"]]
324 324  
325 325  
326 -=== 2.3.2 Get the only gateway EUI ===
327 327  
199 +=== **2.2.2 Get the only gateway EUI** ===
328 328  
201 +
329 329  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
330 330  
331 331  
... ... @@ -347,9 +347,10 @@
347 347  [[image:image-20220622103956-12.png]]
348 348  
349 349  
350 -=== 2.3.3 Register the gateway to The Things Network ===
351 351  
224 +== **2.2.3 Register the gateway to The Things Network** ==
352 352  
226 +
353 353  **Login to The Things Network**
354 354  
355 355  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -363,21 +363,25 @@
363 363  **Get it online**
364 364  
365 365  
366 -= 3. Web Configure Pages =
367 367  
368 -== 3.1 Home ==
241 += **3. Web Configure Pages** =
369 369  
370 370  
244 +== **3.1 Home** ==
245 +
246 +
371 371  //Shows the system running status~://
372 372  
373 373  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
374 374  
375 375  
376 -== 3.2 LoRa Settings ==
377 377  
378 -=== 3.2.1 LoRa ~-~-> LoRa ===
253 +== **3.2 LoRa Settings** ==
379 379  
380 380  
256 +=== **3.2.1 LoRa ~-~-> LoRa** ===
257 +
258 +
381 381  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
382 382  
383 383  //Different LPS8v2 hardware versions can support different frequency ranges~://
... ... @@ -398,11 +398,13 @@
398 398  )))
399 399  
400 400  
401 -== 3.3 LoRaWAN Settings ==
402 402  
403 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
404 404  
405 405  
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
284 +
285 +
406 406  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
407 407  
408 408  
... ... @@ -409,9 +409,10 @@
409 409  [[image:image-20220616111932-2.png||height="516" width="672"]]
410 410  
411 411  
412 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
413 413  
293 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
414 414  
295 +
415 415  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 416  
417 417  
... ... @@ -423,95 +423,57 @@
423 423  )))
424 424  
425 425  
426 -== 3.4 Network Settings ==
427 427  
428 -=== 3.4.1 Network ~-~-> WiFi ===
308 +== **3.4 Network Settings** ==
429 429  
430 430  
431 -[[image:image-20220616114756-4.png||height="251" width="669"]]
311 +=== **3.4.1 Network ~-~-> WiFi** ===
432 432  
433 433  
434 -=== 3.4.2 Network ~-~-> System Status ===
314 +[[image:image-20220616114756-4.png||height="251" width="669"]]
435 435  
436 436  
437 -[[image:image-20220820134112-2.png||height="539" width="668"]]
438 438  
318 +=== **3.4.2 Network ~-~-> System Status** ===
439 439  
440 -=== 3.4.3 Network ~-~-> Network ===
441 441  
321 +[[image:image-20220820134112-2.png||height="539" width="668"]]
442 442  
443 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
444 444  
445 -[[image:image-20230214093657-2.png||height="333" width="858"]]
446 446  
325 +=== **3.4.3 Network ~-~-> Firewall** ===
447 447  
448 -=== 3.4.4 Network ~-~-> Cellular ===
449 449  
328 +[[image:image-20220616115351-6.png||height="244" width="661"]]
450 450  
451 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
452 452  
453 -(% style="color:red" %)**Note: APN cannot be empty.**
454 454  
455 -[[image:image-20230228115126-1.png]]
332 +== **3.5 System** ==
456 456  
457 457  
458 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
335 +=== **3.5.1  System ~-~-> System Overview** ===
459 459  
460 -[[image:image-20230228115535-2.png||height="478" width="888"]]
461 461  
462 -
463 -== 3.5 System ==
464 -
465 -=== 3.5.1 System ~-~-> System Overview ===
466 -
467 -
468 468  Shows the system info:
469 469  
470 470  [[image:image-20220917144512-5.png||height="618" width="853"]]
471 471  
472 472  
473 -=== 3.5.2 System ~-~-> System General ===
474 474  
344 +=== **3.5.2 System ~-~-> Backup/Restore** ===
475 475  
476 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
477 477  
478 -In addition, Users can customize the FallBack IP address.
479 -
480 -[[image:image-20230214094058-3.png]]
481 -
482 -
483 -=== 3.5.3 System ~-~-> Backup/Restore ===
484 -
485 -
486 486  [[image:image-20220917144725-6.png||height="208" width="869"]]
487 487  
488 488  
489 -=== 3.5.4 System ~-~-> Remoteit ===
490 490  
351 += **4. Build-in Server** =
491 491  
492 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
493 493  
494 -
495 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
496 -
497 -[[image:image-20221230092303-2.png]]
498 -
499 -
500 -=== 3.5.5 System ~-~-> Package Management ===
501 -
502 -
503 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
504 -
505 -[[image:image-20230214094316-4.png]]
506 -
507 -
508 -= 4. Build-in Server =
509 -
510 -
511 511  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
512 512  
513 513  
514 -[[image:image-20230214095318-5.png||height="347" width="980"]]
357 +[[image:image-20220820115644-1.png||height="217" width="778"]]
515 515  
516 516  
517 517  (% style="color:red" %)**Note:**
... ... @@ -529,9 +529,10 @@
529 529   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
530 530  
531 531  
532 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
533 533  
376 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
534 534  
378 +
535 535  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
536 536  
537 537  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -547,19 +547,10 @@
547 547  [[image:image-20220725171719-1.png||height="570" width="769"]]
548 548  
549 549  
550 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
551 551  
395 +== **4.2 Application Server ~-~- Node-Red** ==
552 552  
553 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
554 554  
555 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
556 -
557 -[[image:image-20230321092456-1.png]]
558 -
559 -
560 -== 4.2 Application Server ~-~- Node-Red ==
561 -
562 -
563 563  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
564 564  
565 565  
... ... @@ -570,7 +570,7 @@
570 570  
571 571  
572 572  
573 -=== **Using Node-Red, InfluxDB and Grafana** ===
408 +=== **Using Node-Red, InfluxDB and Grafana,** ===
574 574  
575 575  The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
576 576  
... ... @@ -580,78 +580,16 @@
580 580  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
581 581  
582 582  
583 -=== **Upgrade the node.js** ===
418 += **5. How users can access LPS8v2 using serial USB** =
584 584  
585 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
586 586  
421 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
587 587  
588 -the users can refer to this link to upgrade them.
589 589  
590 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
424 +Port 1 of the UART on the LPS8v2 is GND
591 591  
592 -
593 -== 4.3 How to disable the built-in server ==
594 -
595 -
596 -Use the following commands to start and stop the TTNv3 service:
597 -
598 598  (% class="box infomessage" %)
599 599  (((
600 -**# start**
601 -systemctl start ttnstack
602 -
603 -**# stop**
604 -systemctl stop ttnstack
605 -
606 -**# enable**
607 -systemctl enable ttnstack
608 -
609 -**#disable**
610 -systemctl disable ttnstack
611 -)))
612 -
613 -Use the following commands to start and stop the Node-Red service:
614 -
615 -(% class="box infomessage" %)
616 -(((
617 -**# start**
618 -systemctl start nodered
619 -
620 -**# stop**
621 -systemctl stop nodered
622 -
623 -**# enable**
624 -systemctl enable nodered
625 -
626 -**#disable**
627 -systemctl disable nodered
628 -)))
629 -
630 -
631 -== 4.4 How to use ChirpStack on LPS8-V2 ==
632 -
633 -
634 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
635 -
636 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
637 -
638 -[[image:image-20230222094908-1.png||height="133" width="798"]]
639 -
640 -
641 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
642 -
643 -
644 -
645 -= 6. How users can access LPS8-V2 using serial USB =
646 -
647 -
648 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
649 -
650 -
651 -Port 1 of the UART on the LPS8-V2 is GND
652 -
653 -(% class="box infomessage" %)
654 -(((
655 655  **TXD  <~-~--> UART RXD (Gray line)**
656 656  
657 657  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -662,9 +662,10 @@
662 662  
663 663  **LPS8v2 UART connection photo**
664 664  
438 +[[image:image-20220804163015-1.png||height="621" width="466"]]
665 665  
666 -[[image:image-20230421094319-2.png||height="351" width="392"]]
667 667  
441 +
668 668  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
669 669  
670 670  
... ... @@ -674,9 +674,10 @@
674 674  [[image:image-20220804164747-2.png||height="622" width="594"]]
675 675  
676 676  
677 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
678 678  
452 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
679 679  
454 +
680 680  == **Step 1: Configure Frequency Band** ==
681 681  
682 682  
... ... @@ -702,72 +702,59 @@
702 702  
703 703  **Access the gateway CLI via SSH.**
704 704  
705 -[[image:image-20230425153417-2.png]]
480 +[[image:image-20220905165222-3.png]]
706 706  
707 707  
708 -**Install the new gateway-rs**
483 +**Download gateway-rs.**
709 709  
485 +[[image:image-20220905165715-5.png]]
486 +
710 710  (% class="box infomessage" %)
711 711  (((
712 -**apt update && apt install helium-gateway**
489 +**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
713 713  )))
714 714  
715 -[[image:image-20230425154058-4.png]]
716 716  
493 +**Install gateway-rs.**
717 717  
495 +[[image:image-20220905165917-7.png]]
718 718  
719 -Option: If you installed the older gateway-rs, you have clean it
720 -
721 721  (% class="box infomessage" %)
722 722  (((
723 -**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
499 +**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
724 724  )))
725 725  
726 -[[image:image-20230425153823-3.png]]
727 727  
503 +**Modify configuration.**
728 728  
729 -**Change the region setting:**
730 730  
506 +[[image:image-20220905173847-12.png]]
731 731  
732 -(% class="box infomessage" %)
733 -(((
734 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
735 735  
736 -
737 -**e.g: **
738 -
739 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
740 -
741 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
742 -)))
743 -
744 -
745 -**Restart the gateway-rs**
746 -
747 747  (% class="box infomessage" %)
748 748  (((
749 -**systemctl restart helium_gateway**
511 +**region=<Enter regional parameters> \
512 +&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 +&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
750 750  )))
751 751  
752 -[[image:image-20230425155612-7.png||height="265" width="911"]]
753 753  
517 +**Restart the helium_gateway**
754 754  
519 +[[image:image-20220905170920-9.png]]
755 755  
756 -**Check the helium_gateway running status**
757 757  
758 -
759 759  (% class="box infomessage" %)
760 760  (((
761 -**systemctl status helium_gateway**
524 +**systemctl restart helium_gateway**
762 762  )))
763 763  
764 764  
765 -[[image:image-20230425154740-5.png]]
528 +**Check the helium_gateway Log：**
766 766  
530 +[[image:image-20220905173952-13.png]]
767 767  
768 768  
769 -**Check the helium_gateway Log：**
770 -
771 771  (% class="box infomessage" %)
772 772  (((
773 773  **journalctl -u helium_gateway -f**
... ... @@ -774,38 +774,23 @@
774 774  )))
775 775  
776 776  
777 -[[image:image-20230425155659-8.png]]
539 +(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
778 778  
541 +where the helium gateway log is shown:
779 779  
780 -= 8. OTA System Update =
543 +[[image:image-20220905174534-14.png]]
781 781  
782 782  
783 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
546 +So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
784 784  
785 785  
786 786  
787 -= 9. FAQ =
550 += **7. Trouble Shooting** =
788 788  
789 -== 9.1 How to change Hostname ==
790 790  
553 +== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
791 791  
792 -By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
793 793  
794 -(% class="box infomessage" %)
795 -(((
796 -hostnamectl set-hostname dragino-123456
797 -)))
798 -
799 -[[image:image-20230517102429-1.png]]
800 -
801 -After the configuration is complete, run "reboot" to restart the gateway.
802 -
803 -
804 -= 10. Trouble Shooting =
805 -
806 -== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
807 -
808 -
809 809  [[image:image-20220920135918-1.png]]
810 810  
811 811  
... ... @@ -821,38 +821,11 @@
821 821  [[image:image-20220920141936-2.png]]
822 822  
823 823  
824 -== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
825 825  
826 -When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
827 827  
828 -[[image:image-20230508171607-1.png]]
573 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
829 829  
830 830  
831 -== 10.3  Fallback IP does not work, how can users check ==
832 -
833 -
834 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
835 -
836 -
837 -**1.Check whether the configuration is correct**
838 -
839 -Run the CMD command to ipconfig and ping 172.31.255.254.
840 -
841 -If this fails, the user needs to reconfigure.
842 -
843 -[[image:image-20230413170224-3.png||height="433" width="707"]]
844 -
845 -[[image:image-20230413170246-4.png]]
846 -
847 -
848 -**2. Check whether the firewall is disabled**
849 -
850 -If the firewall is not down, this will affect access to the gateway.
851 -
852 -
853 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
854 -
855 -
856 856  (((
857 857  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
858 858  )))
... ... @@ -861,9 +861,10 @@
861 861  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
862 862  
863 863  
864 -= 12. Reference =
865 865  
585 += **9. Reference** =
866 866  
587 +
867 867  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
868 868  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
869 869  
... ... @@ -870,7 +870,7 @@
870 870  
871 871  )))
872 872  
873 -= 13. Order Info =
594 += **10. Order Info** =
874 874  
875 875  
876 876  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -894,9 +894,10 @@
894 894  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
895 895  
896 896  
897 -= 14. Manufacturer Info =
898 898  
619 += **10. Manufacturer Info** =
899 899  
621 +
900 900  **Shenzhen Dragino Technology Development co. LTD**
901 901  
902 902  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -904,9 +904,10 @@
904 904  LongCheng Street, LongGang District ; Shenzhen 518116,China
905 905  
906 906  
907 -= 15. FCC Warning =
908 908  
630 += **11. FCC Warning** =
909 909  
632 +
910 910  (((
911 911  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
912 912  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -144.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0