Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 189.1 >
edited by Xiaoye
on 2023/04/25 15:57
To version < 81.1 >
edited by Xiaoye
on 2022/08/20 11:56
>
Change comment: Uploaded new attachment "image-20220820115644-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,19 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
61 +* Work Temperature: -20 ~~ 65°C
62 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
65 +== **1.3 Features** ==
69 69  
70 -== 1.3 Features ==
71 71  
72 -
73 73  * Open Source Debian system
74 74  * Managed by Web GUI, SSH via WAN or WiFi
75 75  * Remote Management
... ... @@ -85,66 +85,52 @@
85 85  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
86 86  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
87 87  
83 +== **1.4 Block Diagram** ==
88 88  
89 -== 1.4 Block Diagram ==
90 90  
91 91  
87 +== **1.5 LED Indicators** ==
92 92  
93 -== 1.5 LED Indicators ==
94 94  
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 99  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
108 108  
109 109  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
112 112  
113 113  
114 -== 1.6 Button Intruction ==
115 115  
109 += **2. Quick Start** =
116 116  
117 -LPS8-V2 has a black toggle button, which is:
118 118  
119 -
120 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 -
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 -
124 -
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 -
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 -
129 -
130 -= 2. Quick Start =
131 -
132 -
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
139 139  
140 -=== 2.1.1 connect the network ===
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
141 141  
142 142  
143 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
121 +== **2.1.1 connect the network.** ==
144 144  
145 145  
124 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
125 +
126 +
146 146  (((
147 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  )))
149 149  
150 150  (((
... ... @@ -155,43 +155,33 @@
155 155  
156 156  
157 157  
158 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
159 159  
160 160  
161 -[[image:image-20230107084650-2.png||height="310" width="839"]]
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 163  
164 -(% style="color:blue" %)**Steps to connect via fallback IP:**
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
165 165  
166 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
167 167  
168 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
169 169  
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
170 170  
171 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
172 172  
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
173 173  
174 -As in the below photo:
157 +[[image:image-20220622101433-4.png]]
175 175  
176 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
177 177  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
178 178  
179 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
180 180  
181 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
182 182  
183 183  
184 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
185 -
186 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
187 -
188 -
189 -
190 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
191 -
192 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
193 -
194 -
195 195  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
196 196  
197 197  
... ... @@ -205,122 +205,32 @@
205 205  [[image:image-20220622102847-7.png]]
206 206  
207 207  
208 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
209 209  
210 210  
211 -=== 2.1.2 Access Configure Web UI ===
212 212  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
213 213  
214 -**Web Interface**
215 215  
216 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
217 217  
218 218  
219 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
220 -
221 -You will see the login interface of LPS8-V2 as shown below.
222 -
223 -The account details for Web Login are:
224 -
225 -(% style="color:#4f81bd" %)**User Name: root**
226 -
227 -(% style="color:#4f81bd" %)**Password:   dragino**
228 -
229 -[[image:image-20230106153501-1.png||height="367" width="894"]]
230 -
231 -
232 -== 2.2  Typical Network Setup ==
233 -
234 -=== 2.2.1  Overview ===
235 -
236 -
237 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
238 -
239 -* **WAN Port Internet Mode**
240 -* **WiFi Client Mode**
241 -* **Cellular Mode**
242 -
243 -=== 2.2.2  Use WAN port to access Internet ===
244 -
245 -
246 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
247 -
248 -
249 -[[image:image-20230411100633-2.png||height="501" width="935"]]
250 -
251 -
252 -=== 2.2.3  Access the Internet as a WiFi Client ===
253 -
254 -
255 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
256 -
257 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
258 -
259 -[[image:image-20230411095739-1.png||height="264" width="691"]]
260 -
261 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
262 -
263 -
264 -=== 2.2.4  Use built-in 4G modem for internet access ===
265 -
266 -
267 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
268 -
269 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
270 -
271 -
272 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
273 -
274 -First, install the Micro SIM card as below direction
275 -
276 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
277 -
278 -
279 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
280 -
281 -
282 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
283 -
284 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
285 -
286 -
287 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
288 -
289 -
290 -=== 2.2.5  Check Internet connection ===
291 -
292 -In the **home** page, we can check the Internet connection.
293 -
294 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
295 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
296 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
297 -
298 -[[image:image-20230411101534-3.png||height="544" width="942"]]
299 -
300 -
301 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
302 -
303 -=== 2.3.1 Select your area frequency ===
304 -
305 -
306 306  (((
307 307  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
308 -
309 -
310 310  )))
311 311  
312 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
313 313  
314 314  
315 -=== 2.3.2 Get the only gateway EUI ===
316 316  
197 +=== **2.2.2 Get the only gateway EUI** ===
317 317  
199 +
318 318  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
319 319  
202 +[[image:image-20220622103355-10.png]]
320 320  
321 -[[image:image-20220622103355-10.png||height="698" width="949"]]
322 322  
323 -
324 324  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
325 325  
326 326  
... ... @@ -336,9 +336,10 @@
336 336  [[image:image-20220622103956-12.png]]
337 337  
338 338  
339 -=== 2.3.3 Register the gateway to The Things Network ===
340 340  
221 +== 2.2.3 Register the gateway to The Things Network ==
341 341  
223 +
342 342  **Login to The Things Network**
343 343  
344 344  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -352,19 +352,20 @@
352 352  **Get it online**
353 353  
354 354  
355 -= 3. Web Configure Pages =
356 356  
357 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
358 358  
359 359  
241 +== **3.1 Home** ==
242 +
243 +
360 360  //Shows the system running status~://
361 361  
362 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
363 363  
247 +== **3.2 LoRa Settings** ==
364 364  
365 -== 3.2 LoRa Settings ==
366 366  
367 -=== 3.2.1 LoRa ~-~-> LoRa ===
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
368 368  
369 369  
370 370  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -371,158 +371,97 @@
371 371  
372 372  //Different LPS8v2 hardware versions can support different frequency ranges~://
373 373  
374 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
375 375  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
376 376  
377 377  (% class="wikigeneratedid" %)
378 378  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
379 379  
380 -
381 381  (% class="wikigeneratedid" %)
382 382  [[image:image-20220616110739-1.png||height="372" width="682"]]
383 383  
384 384  
385 385  (((
386 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
387 387  )))
388 388  
389 389  
390 -== 3.3 LoRaWAN Settings ==
391 391  
392 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
393 393  
394 394  
395 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
396 396  
397 397  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
398 398  [[image:image-20220616111932-2.png||height="516" width="672"]]
399 399  
400 400  
401 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
402 402  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
403 403  
287 +
404 404  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
405 405  
406 -
407 407  [[image:image-20220616113246-3.png||height="396" width="672"]]
408 408  
409 409  
410 410  (((
411 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
412 412  )))
413 413  
414 414  
415 -== 3.4 Network Settings ==
416 416  
417 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
418 418  
419 419  
420 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
421 421  
422 422  
423 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
424 424  
425 425  
426 -[[image:image-20220820134112-2.png||height="539" width="668"]]
427 427  
309 +=== **3.4.2 Network ~-~-> System Status** ===
428 428  
429 -=== 3.4.3 Network ~-~-> Network ===
430 430  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
431 431  
432 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
433 433  
434 -[[image:image-20230214093657-2.png||height="333" width="858"]]
435 435  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
436 436  
437 -=== 3.4.4 Network ~-~-> Cellular ===
438 438  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
439 439  
440 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
441 441  
442 -(% style="color:red" %)**Note: APN cannot be empty.**
443 443  
444 -[[image:image-20230228115126-1.png]]
323 +== **3.5 System** ==
445 445  
446 446  
447 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
326 +=== **3.5.1  System ~-~-> System Overview** ===
448 448  
449 -[[image:image-20230228115535-2.png||height="478" width="888"]]
450 450  
451 -
452 -== 3.5 System ==
453 -
454 -=== 3.5.1 System ~-~-> System Overview ===
455 -
456 -
457 457  Shows the system info:
458 458  
459 -[[image:image-20220917144512-5.png||height="618" width="853"]]
460 460  
461 461  
462 -=== 3.5.2 System ~-~-> System General ===
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
463 463  
464 464  
465 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
466 466  
467 -In addition, Users can customize the FallBack IP address.
468 468  
469 -[[image:image-20230214094058-3.png]]
470 470  
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
471 471  
472 -=== 3.5.3 System ~-~-> Backup/Restore ===
473 473  
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
474 474  
475 -[[image:image-20220917144725-6.png||height="208" width="869"]]
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
476 476  
477 477  
478 -=== 3.5.4 System ~-~-> Remoteit ===
479 -
480 -
481 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
482 -
483 -
484 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
485 -
486 -[[image:image-20221230092303-2.png]]
487 -
488 -
489 -=== 3.5.5 System ~-~-> Package Management ===
490 -
491 -
492 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
493 -
494 -[[image:image-20230214094316-4.png]]
495 -
496 -
497 -= 4. Build-in Server =
498 -
499 -
500 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
501 -
502 -
503 -[[image:image-20230214095318-5.png||height="347" width="980"]]
504 -
505 -
506 -(% style="color:red" %)**Note:**
507 -
508 - **Path**: System ~-~-> Built-in Server
509 -
510 -
511 -**Troubleshooting:**
512 -
513 -
514 -**~ 1. URL does not jump properly**
515 -
516 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
517 -
518 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
519 -
520 -
521 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
522 -
523 -
524 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
525 -
526 526  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
527 527  
528 528  
... ... @@ -536,276 +536,86 @@
536 536  [[image:image-20220725171719-1.png||height="570" width="769"]]
537 537  
538 538  
539 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
540 -
541 -
542 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
543 -
544 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
545 -
546 -[[image:image-20230321092456-1.png]]
547 -
548 -
549 -== 4.2 Application Server ~-~- Node-Red ==
550 -
551 -
552 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
553 -
554 -
555 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
556 -
557 -
558 -[[image:image-20220725172124-3.png||height="610" width="843"]]
559 -
560 -
561 -
562 -=== **Using Node-Red, InfluxDB and Grafana** ===
563 -
564 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
565 -
566 -
567 -the users can refer to this link to install them.
568 -
569 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
570 -
571 -
572 -=== **Upgrade the node.js** ===
573 -
574 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
575 -
576 -
577 -the users can refer to this link to upgrade them.
578 -
579 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
580 -
581 -
582 -== 4.3 How to disable the built-in server ==
583 -
584 -
585 -Use the following commands to start and stop the TTNv3 service:
586 -
587 -(% class="box infomessage" %)
588 588  (((
589 -**# start**
590 -systemctl start ttnstack
591 -
592 -**# stop**
593 -systemctl stop ttnstack
594 -
595 -**# enable**
596 -systemctl enable ttnstack
597 -
598 -**#disable**
599 -systemctl disable ttnstack
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
600 600  )))
601 601  
602 -Use the following commands to start and stop the Node-Red service:
603 603  
604 604  (% class="box infomessage" %)
605 605  (((
606 -**# start**
607 -systemctl start nodered
608 -
609 -**# stop**
610 -systemctl stop nodered
611 -
612 -**# enable**
613 -systemctl enable nodered
614 -
615 -**#disable**
616 -systemctl disable nodered
617 -)))
618 -
619 -
620 -== 4.4 How to use ChirpStack on LPS8-V2 ==
621 -
622 -
623 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
624 -
625 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
626 -
627 -[[image:image-20230222094908-1.png||height="133" width="798"]]
628 -
629 -
630 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
631 -
632 -
633 -
634 -= 6. How users can access LPS8-V2 using serial USB =
635 -
636 -
637 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
638 -
639 -
640 -Port 1 of the UART on the LPS8-V2 is GND
641 -
642 -(% class="box infomessage" %)
643 643  (((
644 -**TXD  <~-~--> UART RXD (Gray line)**
645 -
646 -**RXD  <~-~--> UART TXD (White line)**
647 -
648 -**GND <~-~--> GND (Black line)**
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
649 649  )))
373 +)))
650 650  
651 651  
652 -**LPS8v2 UART connection photo**
653 653  
377 += **5. Build-in Application Server ~-~- Node-Red** =
654 654  
655 -[[image:image-20230421094319-2.png||height="351" width="392"]]
656 656  
657 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
658 658  
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
659 659  
660 -[[image:image-20220804164928-3.png||height="320" width="332"]]
661 661  
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
662 662  
663 -[[image:image-20220804164747-2.png||height="622" width="594"]]
664 664  
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
665 665  
666 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
667 667  
668 -
669 -== **Step 1: Configure Frequency Band** ==
670 -
671 -
672 -//Each country has a requirement for frequency region. Choose the right one for your area.//
673 -
674 -[[image:image-20220905164308-1.png]]
675 -
676 -
677 -
678 -== **Step 2: Configure the forward address** ==
679 -
680 -
681 -**Select one of the servers to configure.**
682 -
683 -**For example:**
684 -
685 -[[image:image-20220905164847-2.png]]
686 -
687 -
688 -
689 -== **Step 3: Download and Install the Helium-gateway-rs** ==
690 -
691 -
692 -**Access the gateway CLI via SSH.**
693 -
694 -[[image:image-20230425153417-2.png]]
695 -
696 -
697 -**Install the new gateway-rs**
698 -
699 -[[image:image-20230425154058-4.png]]
700 -
701 -
702 -
703 -Option: If you installed the older gateway-rs, you have clean it
704 -
705 -[[image:image-20230425153823-3.png]]
706 -
707 -
708 -**Change the region setting:**
709 -
710 -
711 -(% class="box infomessage" %)
712 712  (((
713 -**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
714 -
715 -
716 -**e.g: **
717 -
718 -**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
719 -
720 -**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
721 721  )))
722 722  
723 723  
724 -**Restart the gateway-rs**
725 725  
726 726  (% class="box infomessage" %)
727 727  (((
728 -**systemctl restart helium_gateway**
400 +(((
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
729 729  )))
404 +)))
730 730  
731 -[[image:image-20230425155612-7.png||height="265" width="911"]]
406 +[[image:image-20220728102000-1.png]]
732 732  
733 733  
409 += **6. How users can access LPS8v2 using serial USB** =
734 734  
735 -**Check the helium_gateway running status**
736 736  
412 +**USB TTL to LPS8v2  Connection:**
737 737  
414 +Port 1 of the UART on the LPS8v2 is GND
415 +
738 738  (% class="box infomessage" %)
739 739  (((
740 -**systemctl status helium_gateway**
741 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
742 742  
743 -[[image:image-20230425154740-5.png]]
420 +RXD  <~-~--> UART TXD (White line)
744 744  
745 -
746 -
747 -**Check the helium_gateway Log：**
748 -
749 -(% class="box infomessage" %)
750 -(((
751 -**journalctl -u helium_gateway -f**
422 +GND <~-~--> GND (Black line)
752 752  )))
753 753  
754 754  
755 -[[image:image-20230425155659-8.png]]
426 +**LPS8v2 UART connection photo**
756 756  
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
757 757  
758 -= 8. OTA System Update =
759 759  
760 760  
761 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
762 762  
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
763 763  
764 -= 9. Trouble Shooting =
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
765 765  
766 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
767 767  
768 768  
769 -[[image:image-20220920135918-1.png]]
770 -
771 -
772 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
773 -
774 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
775 -
776 -
777 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
778 -
779 -**Click the update URL button to configure the URL with the current eth port address.**
780 -
781 -[[image:image-20220920141936-2.png]]
782 -
783 -
784 -== 9.2  Fallback IP does not work, how can users check ==
785 -
786 -
787 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
788 -
789 -
790 -**1.Check whether the configuration is correct**
791 -
792 -Run the CMD command to ipconfig and ping 172.31.255.254.
793 -
794 -If this fails, the user needs to reconfigure.
795 -
796 -[[image:image-20230413170224-3.png||height="433" width="707"]]
797 -
798 -[[image:image-20230413170246-4.png]]
799 -
800 -
801 -**2. Check whether the firewall is disabled**
802 -
803 -If the firewall is not down, this will affect access to the gateway.
804 -
805 -
806 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
807 -
808 -
809 809  (((
810 810  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
811 811  )))
... ... @@ -814,9 +814,10 @@
814 814  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
815 815  
816 816  
817 -= 11. Reference =
818 818  
450 += **11 Reference** =
819 819  
452 +
820 820  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
821 821  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
822 822  
... ... @@ -823,7 +823,7 @@
823 823  
824 824  )))
825 825  
826 -= 12. Order Info =
459 += **12. Order Info** =
827 827  
828 828  
829 829  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -847,9 +847,10 @@
847 847  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
848 848  
849 849  
850 -= 13. Manufacturer Info =
851 851  
484 += **13. Manufacturer Info** =
852 852  
486 +
853 853  **Shenzhen Dragino Technology Development co. LTD**
854 854  
855 855  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -857,9 +857,10 @@
857 857  LongCheng Street, LongGang District ; Shenzhen 518116,China
858 858  
859 859  
860 -= 14. FCC Warning =
861 861  
495 += **14. FCC Warning** =
862 862  
497 +
863 863  (((
864 864  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
865 865  )))
... ... @@ -888,7 +888,5 @@
888 888  
889 889  (((
890 890  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
891 -
892 -
893 893  )))
894 894  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0