Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 184.1 >
edited by Xiaoye
on 2023/04/25 15:40
To version < 214.1 >
edited by Xiaoye
on 2023/06/07 09:44
>
Change comment: Uploaded new attachment "image-20230607094447-2.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -83,8 +83,8 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
88 88  
89 89  
90 90  
... ... @@ -98,19 +98,19 @@
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
101 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
102 102  
103 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
103 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
105 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
106 106  
107 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
107 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
108 108  
109 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
109 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
110 110  
111 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
111 + ✓** SOLID RED:** Device doesn't have an Internet connection.
112 112  
113 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
114 114  
115 115  
116 116  == 1.6 Button Intruction ==
... ... @@ -121,12 +121,12 @@
121 121  
122 122  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
124 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
125 125  
126 126  
127 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
127 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
128 128  
129 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
129 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
130 130  
131 131  
132 132  = 2. Quick Start =
... ... @@ -142,9 +142,24 @@
142 142  === 2.1.1 connect the network ===
143 143  
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
145 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
146 146  
147 147  
148 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
149 +
150 +(% style="background-color:yellow" %)**dragino+dragino**
151 +
152 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 +
154 +[[image:image-20230527084515-1.png]]
155 +
156 +[[image:image-20230527085250-2.png||height="495" width="284"]]
157 +
158 +
159 +
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
161 +
162 +
148 148  (((
149 149  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
150 150  )))
... ... @@ -157,7 +157,7 @@
157 157  
158 158  
159 159  
160 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
175 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
161 161  
162 162  
163 163  [[image:image-20230107084650-2.png||height="310" width="839"]]
... ... @@ -170,7 +170,7 @@
170 170  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
171 171  
172 172  
173 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
188 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
174 174  
175 175  
176 176  As in the below photo:
... ... @@ -180,7 +180,7 @@
180 180  
181 181  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
182 182  
183 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
198 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
184 184  
185 185  
186 186  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
... ... @@ -189,7 +189,7 @@
189 189  
190 190  
191 191  
192 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
207 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
193 193  
194 194  [[image:image-20220622100542-2.png||height="369" width="1256"]]
195 195  
... ... @@ -224,9 +224,9 @@
224 224  
225 225  The account details for Web Login are:
226 226  
227 -(% style="color:#4f81bd" %)**User Name: root**
242 +(% style="color:blue" %)**User Name: root**
228 228  
229 -(% style="color:#4f81bd" %)**Password:   dragino**
244 +(% style="color:blue" %)**Password:   dragino**
230 230  
231 231  [[image:image-20230106153501-1.png||height="367" width="894"]]
232 232  
... ... @@ -239,9 +239,13 @@
239 239  LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
240 240  
241 241  * **WAN Port Internet Mode**
257 +
242 242  * **WiFi Client Mode**
259 +
243 243  * **Cellular Mode**
244 244  
262 +
263 +
245 245  === 2.2.2  Use WAN port to access Internet ===
246 246  
247 247  
... ... @@ -291,6 +291,7 @@
291 291  
292 292  === 2.2.5  Check Internet connection ===
293 293  
313 +
294 294  In the **home** page, we can check the Internet connection.
295 295  
296 296  * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
... ... @@ -359,7 +359,7 @@
359 359  == 3.1 Home ==
360 360  
361 361  
362 -//Shows the system running status~://
382 +Shows the system running status:
363 363  
364 364  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
365 365  
... ... @@ -369,15 +369,15 @@
369 369  === 3.2.1 LoRa ~-~-> LoRa ===
370 370  
371 371  
372 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
392 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
373 373  
374 -//Different LPS8v2 hardware versions can support different frequency ranges~://
394 +Different LPS8v2 hardware versions can support different frequency ranges:
375 375  
376 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
377 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
396 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
397 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
378 378  
379 379  (% class="wikigeneratedid" %)
380 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
400 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
381 381  
382 382  
383 383  (% class="wikigeneratedid" %)
... ... @@ -394,7 +394,7 @@
394 394  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
395 395  
396 396  
397 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
417 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
398 398  
399 399  
400 400  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -403,7 +403,7 @@
403 403  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
404 404  
405 405  
406 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
426 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
407 407  
408 408  
409 409  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -431,7 +431,7 @@
431 431  === 3.4.3 Network ~-~-> Network ===
432 432  
433 433  
434 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
454 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
435 435  
436 436  [[image:image-20230214093657-2.png||height="333" width="858"]]
437 437  
... ... @@ -439,7 +439,7 @@
439 439  === 3.4.4 Network ~-~-> Cellular ===
440 440  
441 441  
442 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
462 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
443 443  
444 444  (% style="color:red" %)**Note: APN cannot be empty.**
445 445  
... ... @@ -464,7 +464,7 @@
464 464  === 3.5.2 System ~-~-> System General ===
465 465  
466 466  
467 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
487 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
468 468  
469 469  In addition, Users can customize the FallBack IP address.
470 470  
... ... @@ -480,7 +480,7 @@
480 480  === 3.5.4 System ~-~-> Remoteit ===
481 481  
482 482  
483 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
503 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
484 484  
485 485  
486 486  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -491,7 +491,7 @@
491 491  === 3.5.5 System ~-~-> Package Management ===
492 492  
493 493  
494 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
514 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
495 495  
496 496  [[image:image-20230214094316-4.png]]
497 497  
... ... @@ -622,13 +622,29 @@
622 622  == 4.4 How to use ChirpStack on LPS8-V2 ==
623 623  
624 624  
625 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
645 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
626 626  
627 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
647 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
628 628  
629 -[[image:image-20230222094908-1.png||height="133" width="798"]]
630 630  
650 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
631 631  
652 +
653 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
654 +
655 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
656 +
657 +[[image:image-20230602140406-3.png||height="480" width="918"]]
658 +
659 +
660 +When the configuration is complete, click** "Save&Apply"**.
661 +
662 +
663 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
664 +
665 +[[image:image-20230602143122-4.png||height="511" width="983"]]
666 +
667 +
632 632  = 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
633 633  
634 634  
... ... @@ -693,75 +693,81 @@
693 693  
694 694  **Access the gateway CLI via SSH.**
695 695  
696 -[[image:image-20220905165222-3.png]]
732 +[[image:image-20230425153417-2.png]]
697 697  
698 698  
699 -**Download gateway-rs.**
735 +**Install the new gateway-rs**
700 700  
701 -[[image:image-20220905165715-5.png]]
702 -
703 703  (% class="box infomessage" %)
704 704  (((
705 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
739 +**apt update && apt install helium-gateway**
706 706  )))
707 707  
742 +[[image:image-20230425154058-4.png]]
708 708  
709 -**Install gateway-rs.**
710 710  
711 -[[image:image-20220905165917-7.png]]
712 712  
746 +Option: If you installed the older gateway-rs, you have clean it
747 +
713 713  (% class="box infomessage" %)
714 714  (((
715 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
750 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
716 716  )))
717 717  
753 +[[image:image-20230425153823-3.png]]
718 718  
719 -**Modify configuration.**
720 720  
756 +**Change the region setting:**
721 721  
722 -[[image:image-20220905173847-12.png]]
723 723  
724 -
725 725  (% class="box infomessage" %)
726 726  (((
727 -**region=<Enter regional parameters> \
728 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
729 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
730 -)))
761 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
731 731  
732 732  
733 -**Restart the helium_gateway**
764 +**e.g: **
734 734  
735 -[[image:image-20220905170920-9.png]]
766 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
736 736  
768 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
769 +)))
737 737  
771 +
772 +**Restart the gateway-rs**
773 +
738 738  (% class="box infomessage" %)
739 739  (((
740 740  **systemctl restart helium_gateway**
741 741  )))
742 742  
779 +[[image:image-20230425155612-7.png||height="265" width="911"]]
743 743  
744 -**Check the helium_gateway Log：**
745 745  
746 -[[image:image-20220905173952-13.png]]
747 747  
783 +**Check the helium_gateway running status**
748 748  
785 +
749 749  (% class="box infomessage" %)
750 750  (((
751 -**journalctl -u helium_gateway -f**
788 +**systemctl status helium_gateway**
752 752  )))
753 753  
754 754  
755 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
792 +[[image:image-20230425154740-5.png]]
756 756  
757 -where the helium gateway log is shown:
758 758  
759 -[[image:image-20220905174534-14.png]]
760 760  
796 +**Check the helium_gateway Log：**
761 761  
762 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
798 +(% class="box infomessage" %)
799 +(((
800 +**journalctl -u helium_gateway -f**
801 +)))
763 763  
764 764  
804 +[[image:image-20230425155659-8.png]]
805 +
806 +
765 765  = 8. OTA System Update =
766 766  
767 767  
... ... @@ -768,11 +768,52 @@
768 768  LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
769 769  
770 770  
771 -= 9. Trouble Shooting =
813 += 9. FAQ =
772 772  
773 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
815 +== 9.1 How to change Hostname ==
774 774  
775 775  
818 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
819 +
820 +(% class="box infomessage" %)
821 +(((
822 +hostnamectl set-hostname dragino-123456
823 +)))
824 +
825 +[[image:image-20230517102429-1.png]]
826 +
827 +After the configuration is complete, run "reboot" to restart the gateway.
828 +
829 +
830 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
831 +
832 +
833 +Migrate guide:
834 +
835 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
836 +
837 +2. Download migrate script and run it.
838 +
839 +(% class="box infomessage" %)
840 +(((
841 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
842 +)))
843 +
844 +[[image:image-20230602135658-1.png||height="545" width="986"]]
845 +
846 +
847 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
848 +
849 +[[image:image-20230602135825-2.png||height="356" width="855"]]
850 +
851 +The default account for chirpstack is: **admin/admin**
852 +
853 +
854 += 10. Trouble Shooting =
855 +
856 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
857 +
858 +
776 776  [[image:image-20220920135918-1.png]]
777 777  
778 778  
... ... @@ -788,9 +788,17 @@
788 788  [[image:image-20220920141936-2.png]]
789 789  
790 790  
791 -== 9.2  Fallback IP does not work, how can users check ==
874 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
792 792  
793 793  
877 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
878 +
879 +[[image:image-20230508171607-1.png]]
880 +
881 +
882 +== 10.3  Fallback IP does not work, how can users check ==
883 +
884 +
794 794  When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
795 795  
796 796  
... ... @@ -810,27 +810,37 @@
810 810  If the firewall is not down, this will affect access to the gateway.
811 811  
812 812  
813 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
904 +== 10.4  Click "Manual_Update", why there is no response? ==
814 814  
815 815  
907 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
908 +
909 +
910 +[[image:image-20230527090555-3.png||height="660" width="832"]]
911 +
912 +
913 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
914 +
915 +
816 816  (((
817 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
917 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
818 818  )))
819 819  
820 820  (((
821 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
921 +With your question as detailed as possible. We will reply and help you in the shortest.
822 822  
823 823  
824 -= 11. Reference =
924 += 12. Reference =
825 825  
826 826  
827 827  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
828 828  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
829 829  
930 +
830 830  
831 831  )))
832 832  
833 -= 12. Order Info =
934 += 13. Order Info =
834 834  
835 835  
836 836  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -854,7 +854,7 @@
854 854  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
855 855  
856 856  
857 -= 13. Manufacturer Info =
958 += 14. Manufacturer Info =
858 858  
859 859  
860 860  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -864,7 +864,7 @@
864 864  LongCheng Street, LongGang District ; Shenzhen 518116,China
865 865  
866 866  
867 -= 14. FCC Warning =
968 += 15. FCC Warning =
868 868  
869 869  
870 870  (((
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0