Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 180.3 >
edited by Xiaoling
on 2023/04/23 09:56
To version < 66.1 >
edited by Xiaoye
on 2022/07/25 19:50
>
Change comment: Uploaded new attachment "image-20220725195041-1.jpeg", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,9 +2,8 @@
1 -(% style="text-align:center" %)
2 2  [[image:image-20220620202334-2.png||height="467" width="809"]]
3 3  
4 4  
5 5  (((
6 -
5 +**LPS8v2 User Manual**
7 7  
8 8  
9 9  )))
... ... @@ -12,65 +12,44 @@
12 12  
13 13  {{toc/}}
14 14  
14 += **1. Introduction** =
15 15  
16 +== **1.1 What is LPS8v2** ==
16 16  
17 -
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
28 28  
29 -(((
30 30  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 34  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 42  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
44 44  
45 45  
46 -== 1.2 Specifications ==
30 +== **1.2 Specifications** ==
47 47  
32 +**Hardware System:**
48 48  
49 -(% style="color:#037691" %)**Hardware System:**
50 -
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
55 -(% style="color:#037691" %)**Interface:**
38 +**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 -(% style="color:#037691" %)**Operating Condition:**
44 +**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
46 +* Work Temperature: -20 ~~ 65°C
47 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
50 +== **1.3 Features** ==
69 69  
70 -
71 -== 1.3 Features ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 76  * Remote Management
... ... @@ -83,249 +83,117 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
64 +* Built-in //**The Things Network**// local LoRaWAN server
65 +* Built-in  //**Node-Red**// local Application server
88 88  
67 +== **1.4 Block Diagram** ==
89 89  
90 90  
91 -== 1.4 Block Diagram ==
70 +== **1.5 LED Indicators** ==
92 92  
93 -
94 -
95 -== 1.5 LED Indicators ==
96 -
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
75 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
78 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
106 106  
107 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 108  
109 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
81 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
110 110  
111 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
83 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
112 112  
113 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
114 114  
87 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
115 115  
116 -== 1.6 Button Intruction ==
117 117  
90 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
118 118  
119 -LPS8-V2 has a black toggle button, which is:
120 120  
93 += **2. Quick Start** =
121 121  
122 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 -
124 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 -
126 -
127 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 -
129 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 -
131 -
132 -= 2. Quick Start =
133 -
134 -
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
140 -== 2.1 Connects to the network and accesses the gateway Web UI ==
100 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
141 141  
142 -=== 2.1.1 connect the network ===
143 143  
103 +== **2.1.1 connect the network.** ==
144 144  
145 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
105 +=== ===
146 146  
107 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
147 147  
148 -(((
149 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
150 -)))
109 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
151 151  
152 -(((
153 153  You can also use this IP to connect.
154 -)))
155 155  
156 156  [[image:image-20220622100129-1.png||height="332" width="1263"]]
157 157  
158 158  
116 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
159 159  
160 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
161 161  
119 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 -[[image:image-20230107084650-2.png||height="310" width="839"]]
164 164  
122 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
165 165  
166 -(% style="color:blue" %)**Steps to connect via fallback IP:**
167 167  
168 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
125 +**Steps to connect via fallback IP:**
169 169  
170 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
127 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
171 171  
129 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
172 172  
173 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
131 +[[image:image-20220622101433-4.png]]
174 174  
175 175  
176 -As in the below photo:
134 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
177 177  
178 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
179 179  
137 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
180 180  
181 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
182 182  
183 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
140 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
184 184  
185 185  
186 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
187 -
188 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
189 -
190 -
191 -
192 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
193 -
194 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
195 -
196 -
197 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
198 -
199 -
200 200  [[image:image-20220622102702-6.png]]
201 201  
202 202  
203 -
204 204  **Wi-Fi configuration successful**
205 205  
206 206  
207 207  [[image:image-20220622102847-7.png]]
208 208  
151 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
209 209  
210 -[[image:image-20220622102901-8.png||height="476" width="938"]]
211 211  
212 212  
213 -=== 2.1.2 Access Configure Web UI ===
214 214  
156 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
215 215  
216 -**Web Interface**
217 217  
218 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
159 +=== **2.2.1 Select your area frequency** ===
219 219  
220 -
221 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
222 -
223 -You will see the login interface of LPS8-V2 as shown below.
224 -
225 -The account details for Web Login are:
226 -
227 -(% style="color:#4f81bd" %)**User Name: root**
228 -
229 -(% style="color:#4f81bd" %)**Password:   dragino**
230 -
231 -[[image:image-20230106153501-1.png||height="367" width="894"]]
232 -
233 -
234 -== 2.2  Typical Network Setup ==
235 -
236 -=== 2.2.1  Overview ===
237 -
238 -
239 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
240 -
241 -* **WAN Port Internet Mode**
242 -* **WiFi Client Mode**
243 -* **Cellular Mode**
244 -
245 -=== 2.2.2  Use WAN port to access Internet ===
246 -
247 -
248 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
249 -
250 -
251 -[[image:image-20230411100633-2.png||height="501" width="935"]]
252 -
253 -
254 -=== 2.2.3  Access the Internet as a WiFi Client ===
255 -
256 -
257 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
258 -
259 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
260 -
261 -[[image:image-20230411095739-1.png||height="264" width="691"]]
262 -
263 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
264 -
265 -
266 -=== 2.2.4  Use built-in 4G modem for internet access ===
267 -
268 -
269 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
270 -
271 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
272 -
273 -
274 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
275 -
276 -First, install the Micro SIM card as below direction
277 -
278 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
279 -
280 -
281 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
282 -
283 -
284 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
285 -
286 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
287 -
288 -
289 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
290 -
291 -
292 -=== 2.2.5  Check Internet connection ===
293 -
294 -In the **home** page, we can check the Internet connection.
295 -
296 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
297 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
298 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
299 -
300 -[[image:image-20230411101534-3.png||height="544" width="942"]]
301 -
302 -
303 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
304 -
305 -=== 2.3.1 Select your area frequency ===
306 -
307 -
308 -(((
309 309  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
310 310  
311 -
312 -)))
163 +[[image:image-20220622103332-9.png]]
313 313  
314 -[[image:image-20220622103332-9.png||height="485" width="938"]]
315 315  
166 +=== **2.2.2 Get the only gateway EUI** ===
316 316  
317 -=== 2.3.2 Get the only gateway EUI ===
318 -
319 -
320 320  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
321 321  
170 +[[image:image-20220622103355-10.png]]
322 322  
323 -[[image:image-20220622103355-10.png||height="698" width="949"]]
324 324  
173 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
325 325  
326 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
327 -
328 -
329 329  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
330 330  
331 331  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -338,14 +338,13 @@
338 338  [[image:image-20220622103956-12.png]]
339 339  
340 340  
341 -=== 2.3.3 Register the gateway to The Things Network ===
342 342  
188 +== 2.2.3 Register the gateway to The Things Network ==
343 343  
344 344  **Login to The Things Network**
345 345  
346 346  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
347 347  
348 -
349 349  **Add the gateway**
350 350  
351 351  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -354,466 +354,148 @@
354 354  **Get it online**
355 355  
356 356  
357 -= 3. Web Configure Pages =
202 += **3. Web Configure Pages** =
358 358  
359 -== 3.1 Home ==
360 360  
205 +== **3.1 Home** ==
361 361  
362 362  //Shows the system running status~://
363 363  
364 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
209 +== **3.2 LoRa Settings** ==
365 365  
366 366  
367 -== 3.2 LoRa Settings ==
212 +=== **3.2.1 LoRa ~-~-> LoRa** ===
368 368  
369 -=== 3.2.1 LoRa ~-~-> LoRa ===
370 370  
371 -
372 372  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
373 373  
374 374  //Different LPS8v2 hardware versions can support different frequency ranges~://
375 375  
376 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
219 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
377 377  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
378 378  
379 379  (% class="wikigeneratedid" %)
380 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
223 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
381 381  
382 -
383 383  (% class="wikigeneratedid" %)
384 384  [[image:image-20220616110739-1.png||height="372" width="682"]]
385 385  
386 386  
387 -(((
388 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
389 -)))
229 +//**Note ***: See this instruction for how to customize the frequency band~://
390 390  
231 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
391 391  
392 -== 3.3 LoRaWAN Settings ==
393 393  
394 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
234 +== **3.3 LoRaWAN Settings** ==
395 395  
396 396  
397 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
237 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
398 398  
399 399  
240 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
241 +
400 400  [[image:image-20220616111932-2.png||height="516" width="672"]]
401 401  
402 402  
403 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
245 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
404 404  
405 405  
406 406  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
407 407  
408 -
409 409  [[image:image-20220616113246-3.png||height="396" width="672"]]
410 410  
411 411  
412 -(((
413 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
414 -)))
253 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
415 415  
416 416  
417 -== 3.4 Network Settings ==
256 +== **3.4 Network Settings** ==
418 418  
419 -=== 3.4.1 Network ~-~-> WiFi ===
420 420  
259 +=== **3.4.1 Network ~-~-> WiFi** ===
421 421  
261 +
422 422  [[image:image-20220616114756-4.png||height="251" width="669"]]
423 423  
424 424  
425 -=== 3.4.2 Network ~-~-> System Status ===
265 +=== **3.4.2 Network ~-~-> System Status** ===
426 426  
427 427  
428 -[[image:image-20220820134112-2.png||height="539" width="668"]]
268 +[[image:image-20220616115229-5.png||height="548" width="665"]]
429 429  
430 430  
431 -=== 3.4.3 Network ~-~-> Network ===
271 +=== **3.4.3 Network ~-~-> Firewall** ===
432 432  
433 433  
434 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
274 +[[image:image-20220616115351-6.png||height="244" width="661"]]
435 435  
436 -[[image:image-20230214093657-2.png||height="333" width="858"]]
437 437  
277 +== **3.5 System** ==
438 438  
439 -=== 3.4.4 Network ~-~-> Cellular ===
440 440  
280 +=== **3.5.1  System ~-~-> System Overview** ===
441 441  
442 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
443 443  
444 -(% style="color:red" %)**Note: APN cannot be empty.**
445 -
446 -[[image:image-20230228115126-1.png]]
447 -
448 -
449 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
450 -
451 -[[image:image-20230228115535-2.png||height="478" width="888"]]
452 -
453 -
454 -== 3.5 System ==
455 -
456 -=== 3.5.1 System ~-~-> System Overview ===
457 -
458 -
459 459  Shows the system info:
460 460  
461 -[[image:image-20220917144512-5.png||height="618" width="853"]]
462 462  
286 +=== **3.5.2 System ~-~-> Backup/Restore** ===
463 463  
464 -=== 3.5.2 System ~-~-> System General ===
465 465  
289 +[[image:image-20220616115808-7.png||height="194" width="649"]]
466 466  
467 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
468 468  
469 -In addition, Users can customize the FallBack IP address.
470 470  
471 -[[image:image-20230214094058-3.png]]
293 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
472 472  
473 473  
474 -=== 3.5.3 System ~-~-> Backup/Restore ===
296 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
475 475  
298 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
476 476  
477 -[[image:image-20220917144725-6.png||height="208" width="869"]]
478 478  
301 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
479 479  
480 -=== 3.5.4 System ~-~-> Remoteit ===
481 481  
482 -
483 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
484 -
485 -
486 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
487 -
488 -[[image:image-20221230092303-2.png]]
489 -
490 -
491 -=== 3.5.5 System ~-~-> Package Management ===
492 -
493 -
494 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
495 -
496 -[[image:image-20230214094316-4.png]]
497 -
498 -
499 -= 4. Build-in Server =
500 -
501 -
502 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
503 -
504 -
505 -[[image:image-20230214095318-5.png||height="347" width="980"]]
506 -
507 -
508 -(% style="color:red" %)**Note:**
509 -
510 - **Path**: System ~-~-> Built-in Server
511 -
512 -
513 -**Troubleshooting:**
514 -
515 -
516 -**~ 1. URL does not jump properly**
517 -
518 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
519 -
520 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
521 -
522 -
523 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
524 -
525 -
526 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
527 -
528 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
529 -
530 -
531 531  Login account:
532 532  
533 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
306 +**User ID: ** (% class="mark" %)admin
534 534  
535 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
308 +**Password: ** (% class="mark" %)dragino
536 536  
537 537  
538 538  [[image:image-20220725171719-1.png||height="570" width="769"]]
539 539  
540 540  
541 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
542 542  
315 += **5. Build-in Application Server ~-~- Node-Red** =
543 543  
544 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
545 545  
546 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
318 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
547 547  
548 -[[image:image-20230321092456-1.png]]
320 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
549 549  
550 550  
551 -== 4.2 Application Server ~-~- Node-Red ==
323 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
552 552  
553 -
554 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
555 -
556 -
557 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
558 -
559 -
560 560  [[image:image-20220725172124-3.png||height="610" width="843"]]
561 561  
562 562  
563 563  
564 -=== **Using Node-Red, InfluxDB and Grafana** ===
329 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
330 + You can complete the installation manually with the following command.(%%)**
565 565  
566 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
567 567  
568 -
569 -the users can refer to this link to install them.
570 -
571 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
572 -
573 -
574 -=== **Upgrade the node.js** ===
575 -
576 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
577 -
578 -
579 -the users can refer to this link to upgrade them.
580 -
581 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
582 -
583 -
584 -== 4.3 How to disable the built-in server ==
585 -
586 -
587 -Use the following commands to start and stop the TTNv3 service:
588 -
589 589  (% class="box infomessage" %)
590 590  (((
591 -**# start**
592 -systemctl start ttnstack
593 -
594 -**# stop**
595 -systemctl stop ttnstack
596 -
597 -**# enable**
598 -systemctl enable ttnstack
599 -
600 -**#disable**
601 -systemctl disable ttnstack
335 +(% class="mark" %)cd /tmp && wget  [[http:~~/~~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh>>url:http://repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh]]
336 +(% class="mark" %)chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh
602 602  )))
603 603  
604 -Use the following commands to start and stop the Node-Red service:
605 605  
606 -(% class="box infomessage" %)
607 -(((
608 -**# start**
609 -systemctl start nodered
610 610  
611 -**# stop**
612 -systemctl stop nodered
341 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
613 613  
614 -**# enable**
615 -systemctl enable nodered
616 -
617 -**#disable**
618 -systemctl disable nodered
619 -)))
620 -
621 -
622 -== 4.4 How to use ChirpStack on LPS8-V2 ==
623 -
624 -
625 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
626 -
627 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
628 -
629 -[[image:image-20230222094908-1.png||height="133" width="798"]]
630 -
631 -
632 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
633 -
634 -
635 -
636 -= 6. How users can access LPS8-V2 using serial USB =
637 -
638 -
639 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
640 -
641 -
642 -Port 1 of the UART on the LPS8-V2 is GND
643 -
644 -(% class="box infomessage" %)
645 645  (((
646 -**TXD  <~-~--> UART RXD (Gray line)**
647 -
648 -**RXD  <~-~--> UART TXD (White line)**
649 -
650 -**GND <~-~--> GND (Black line)**
651 -)))
652 -
653 -
654 -**LPS8v2 UART connection photo**
655 -
656 -
657 -[[image:image-20230421094319-2.png||height="351" width="392"]]
658 -
659 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
660 -
661 -
662 -[[image:image-20220804164928-3.png||height="320" width="332"]]
663 -
664 -
665 -[[image:image-20220804164747-2.png||height="622" width="594"]]
666 -
667 -
668 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
669 -
670 -
671 -== **Step 1: Configure Frequency Band** ==
672 -
673 -
674 -//Each country has a requirement for frequency region. Choose the right one for your area.//
675 -
676 -[[image:image-20220905164308-1.png]]
677 -
678 -
679 -
680 -== **Step 2: Configure the forward address** ==
681 -
682 -
683 -**Select one of the servers to configure.**
684 -
685 -**For example:**
686 -
687 -[[image:image-20220905164847-2.png]]
688 -
689 -
690 -
691 -== **Step 3: Download and Install the Helium-gateway-rs** ==
692 -
693 -
694 -**Access the gateway CLI via SSH.**
695 -
696 -[[image:image-20220905165222-3.png]]
697 -
698 -
699 -**Download gateway-rs.**
700 -
701 -[[image:image-20220905165715-5.png]]
702 -
703 -(% class="box infomessage" %)
704 -(((
705 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
706 -)))
707 -
708 -
709 -**Install gateway-rs.**
710 -
711 -[[image:image-20220905165917-7.png]]
712 -
713 -(% class="box infomessage" %)
714 -(((
715 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
716 -)))
717 -
718 -
719 -**Modify configuration.**
720 -
721 -
722 -[[image:image-20220905173847-12.png]]
723 -
724 -
725 -(% class="box infomessage" %)
726 -(((
727 -**region=<Enter regional parameters> \
728 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
729 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
730 -)))
731 -
732 -
733 -**Restart the helium_gateway**
734 -
735 -[[image:image-20220905170920-9.png]]
736 -
737 -
738 -(% class="box infomessage" %)
739 -(((
740 -**systemctl restart helium_gateway**
741 -)))
742 -
743 -
744 -**Check the helium_gateway Log：**
745 -
746 -[[image:image-20220905173952-13.png]]
747 -
748 -
749 -(% class="box infomessage" %)
750 -(((
751 -**journalctl -u helium_gateway -f**
752 -)))
753 -
754 -
755 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
756 -
757 -where the helium gateway log is shown:
758 -
759 -[[image:image-20220905174534-14.png]]
760 -
761 -
762 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
763 -
764 -
765 -= 8. OTA System Update =
766 -
767 -
768 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
769 -
770 -
771 -= 9. Trouble Shooting =
772 -
773 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
774 -
775 -
776 -[[image:image-20220920135918-1.png]]
777 -
778 -
779 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
780 -
781 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
782 -
783 -
784 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
785 -
786 -**Click the update URL button to configure the URL with the current eth port address.**
787 -
788 -[[image:image-20220920141936-2.png]]
789 -
790 -
791 -== 9.2  Fallback IP does not work, how can users check ==
792 -
793 -
794 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
795 -
796 -
797 -**1.Check whether the configuration is correct**
798 -
799 -Run the CMD command to ipconfig and ping 172.31.255.254.
800 -
801 -If this fails, the user needs to reconfigure.
802 -
803 -[[image:image-20230413170224-3.png||height="433" width="707"]]
804 -
805 -[[image:image-20230413170246-4.png]]
806 -
807 -
808 -**2. Check whether the firewall is disabled**
809 -
810 -If the firewall is not down, this will affect access to the gateway.
811 -
812 -
813 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
814 -
815 -
816 -(((
817 817  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
818 818  )))
819 819  
... ... @@ -821,42 +821,38 @@
821 821  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
822 822  
823 823  
824 -= 11. Reference =
351 += **11 Reference** =
825 825  
826 -
827 827  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
828 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
829 829  
830 830  
831 831  )))
832 832  
833 -= 12. Order Info =
358 += **12. Order Info** =
834 834  
835 -
836 836  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
837 837  
838 838  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
839 839  
840 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
841 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
842 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
843 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
844 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
845 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
364 +* **AS923**: LoRaWAN AS923 band
365 +* **AU915**: LoRaWAN AU915 band
366 +* **EU868**: LoRaWAN EU868 band
367 +* **KR920**: LoRaWAN KR920 band
368 +* **US915**: LoRaWAN US915 band
369 +* **IN865**: LoRaWAN IN865 band
846 846  
847 847  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
848 848  
849 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
850 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
851 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
852 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
373 +* ** E**: EMEA, Korea, Thailand, India.
374 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
375 +* ** AU**: Latin America, New Zeland, Taiwan
376 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
853 853  
854 854  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
855 855  
856 856  
857 -= 13. Manufacturer Info =
381 += **13. Manufacturer Info** =
858 858  
859 -
860 860  **Shenzhen Dragino Technology Development co. LTD**
861 861  
862 862  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -864,38 +864,21 @@
864 864  LongCheng Street, LongGang District ; Shenzhen 518116,China
865 865  
866 866  
867 -= 14. FCC Warning =
390 += **14. FCC Warning** =
868 868  
869 -
870 -(((
871 871  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
872 -)))
873 873  
874 -(((
875 875  ~-~- Reorient or relocate the receiving antenna.
876 -)))
877 877  
878 -(((
879 879  ~-~- Increase the separation between the equipment and receiver.
880 -)))
881 881  
882 -(((
883 883  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
884 -)))
885 885  
886 -(((
887 887  ~-~- Consult the dealer or an experienced radio/TV technician for help.
888 -)))
889 889  
890 890  
891 -(((
892 892  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
893 -)))
894 894  
895 895  
896 -(((
897 897  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
898 -
899 -
900 900  )))
901 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220728102000-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -36.4 KB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0