Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 179.1 >
edited by Kilight Cao
on 2023/04/21 09:43
To version < 113.1 >
edited by Xiaoye
on 2022/09/20 14:21
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -16,11 +16,12 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,16 +57,14 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
65 +* Work Temperature: -20 ~~ 65°C
66 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
69 +== **1.3 Features** ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -84,11 +84,11 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
87 +== **1.4 Block Diagram** ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
91 +== **1.5 LED Indicators** ==
92 92  
93 93  
94 94  LPS8-V2 has totally four LEDs, They are:
... ... @@ -109,9 +109,10 @@
109 109  (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
113 113  
113 +== **1.6 Button Intruction** ==
114 114  
115 +
115 115  LPS8-V2 has a black toggle button, which is:
116 116  
117 117  
... ... @@ -125,24 +125,27 @@
125 125   //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 126  
127 127  
128 -= 2. Quick Start =
129 129  
130 += **2. Quick Start** =
130 130  
132 +
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -=== 2.1.1 connect the network ===
139 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
142 +== **2.1.1 connect the network.** ==
142 142  
143 143  
145 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
146 +
147 +
144 144  (((
145 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 146  )))
147 147  
148 148  (((
... ... @@ -153,43 +153,34 @@
153 153  
154 154  
155 155  
156 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
160 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
157 157  
158 158  
159 -[[image:image-20230107084650-2.png||height="310" width="839"]]
163 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
160 160  
161 161  
162 -(% style="color:blue" %)**Steps to connect via fallback IP:**
166 +(((
167 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
168 +)))
163 163  
164 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
165 165  
166 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
167 167  
172 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
168 168  
169 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
174 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
170 170  
176 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
171 171  
172 -As in the below photo:
173 173  
174 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
179 +[[image:image-20220622101433-4.png]]
175 175  
176 176  
177 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
182 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
178 178  
179 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
180 180  
185 +[[image:image-20220622102210-5.png||height="504" width="919"]]
181 181  
182 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
183 183  
184 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
185 -
186 -
187 -
188 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
189 -
190 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
191 -
192 -
193 193  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
194 194  
195 195  
... ... @@ -206,101 +206,13 @@
206 206  [[image:image-20220622102901-8.png||height="476" width="938"]]
207 207  
208 208  
209 -=== 2.1.2 Access Configure Web UI ===
210 210  
205 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
211 211  
212 -**Web Interface**
213 213  
214 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
208 +=== **2.2.1 Select your area frequency** ===
215 215  
216 216  
217 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
218 -
219 -You will see the login interface of LPS8-V2 as shown below.
220 -
221 -The account details for Web Login are:
222 -
223 -(% style="color:#4f81bd" %)**User Name: root**
224 -
225 -(% style="color:#4f81bd" %)**Password:   dragino**
226 -
227 -[[image:image-20230106153501-1.png||height="367" width="894"]]
228 -
229 -
230 -== 2.2  Typical Network Setup ==
231 -
232 -=== 2.2.1  Overview ===
233 -
234 -
235 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
236 -
237 -* **WAN Port Internet Mode**
238 -* **WiFi Client Mode**
239 -* **Cellular Mode**
240 -
241 -=== 2.2.2  Use WAN port to access Internet ===
242 -
243 -
244 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
245 -
246 -
247 -[[image:image-20230411100633-2.png||height="501" width="935"]]
248 -
249 -
250 -=== 2.2.3  Access the Internet as a WiFi Client ===
251 -
252 -
253 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
254 -
255 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
256 -
257 -[[image:image-20230411095739-1.png||height="264" width="691"]]
258 -
259 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
260 -
261 -
262 -=== 2.2.4  Use built-in 4G modem for internet access ===
263 -
264 -
265 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
266 -
267 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
268 -
269 -
270 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
271 -
272 -First, install the Micro SIM card as below direction
273 -
274 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
275 -
276 -
277 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
278 -
279 -
280 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
281 -
282 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
283 -
284 -
285 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
286 -
287 -
288 -=== 2.2.5  Check Internet connection ===
289 -
290 -In the **home** page, we can check the Internet connection.
291 -
292 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
293 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
294 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
295 -
296 -[[image:image-20230411101534-3.png||height="544" width="942"]]
297 -
298 -
299 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
300 -
301 -=== 2.3.1 Select your area frequency ===
302 -
303 -
304 304  (((
305 305  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
306 306  
... ... @@ -310,9 +310,10 @@
310 310  [[image:image-20220622103332-9.png||height="485" width="938"]]
311 311  
312 312  
313 -=== 2.3.2 Get the only gateway EUI ===
314 314  
221 +=== **2.2.2 Get the only gateway EUI** ===
315 315  
223 +
316 316  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
317 317  
318 318  
... ... @@ -334,9 +334,10 @@
334 334  [[image:image-20220622103956-12.png]]
335 335  
336 336  
337 -=== 2.3.3 Register the gateway to The Things Network ===
338 338  
246 +== **2.2.3 Register the gateway to The Things Network** ==
339 339  
248 +
340 340  **Login to The Things Network**
341 341  
342 342  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -350,21 +350,25 @@
350 350  **Get it online**
351 351  
352 352  
353 -= 3. Web Configure Pages =
354 354  
355 -== 3.1 Home ==
263 += **3. Web Configure Pages** =
356 356  
357 357  
266 +== **3.1 Home** ==
267 +
268 +
358 358  //Shows the system running status~://
359 359  
360 360  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
361 361  
362 362  
363 -== 3.2 LoRa Settings ==
364 364  
365 -=== 3.2.1 LoRa ~-~-> LoRa ===
275 +== **3.2 LoRa Settings** ==
366 366  
367 367  
278 +=== **3.2.1 LoRa ~-~-> LoRa** ===
279 +
280 +
368 368  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
369 369  
370 370  //Different LPS8v2 hardware versions can support different frequency ranges~://
... ... @@ -385,11 +385,13 @@
385 385  )))
386 386  
387 387  
388 -== 3.3 LoRaWAN Settings ==
389 389  
390 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
302 +== **3.3 LoRaWAN Settings** ==
391 391  
392 392  
305 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
306 +
307 +
393 393  //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
394 394  
395 395  
... ... @@ -396,9 +396,10 @@
396 396  [[image:image-20220616111932-2.png||height="516" width="672"]]
397 397  
398 398  
399 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
400 400  
315 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
401 401  
317 +
402 402  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
403 403  
404 404  
... ... @@ -410,95 +410,57 @@
410 410  )))
411 411  
412 412  
413 -== 3.4 Network Settings ==
414 414  
415 -=== 3.4.1 Network ~-~-> WiFi ===
330 +== **3.4 Network Settings** ==
416 416  
417 417  
418 -[[image:image-20220616114756-4.png||height="251" width="669"]]
333 +=== **3.4.1 Network ~-~-> WiFi** ===
419 419  
420 420  
421 -=== 3.4.2 Network ~-~-> System Status ===
336 +[[image:image-20220616114756-4.png||height="251" width="669"]]
422 422  
423 423  
424 -[[image:image-20220820134112-2.png||height="539" width="668"]]
425 425  
340 +=== **3.4.2 Network ~-~-> System Status** ===
426 426  
427 -=== 3.4.3 Network ~-~-> Network ===
428 428  
343 +[[image:image-20220820134112-2.png||height="539" width="668"]]
429 429  
430 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
431 431  
432 -[[image:image-20230214093657-2.png||height="333" width="858"]]
433 433  
347 +=== **3.4.3 Network ~-~-> Firewall** ===
434 434  
435 -=== 3.4.4 Network ~-~-> Cellular ===
436 436  
350 +[[image:image-20220616115351-6.png||height="244" width="661"]]
437 437  
438 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
439 439  
440 -(% style="color:red" %)**Note: APN cannot be empty.**
441 441  
442 -[[image:image-20230228115126-1.png]]
354 +== **3.5 System** ==
443 443  
444 444  
445 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
357 +=== **3.5.1  System ~-~-> System Overview** ===
446 446  
447 -[[image:image-20230228115535-2.png||height="478" width="888"]]
448 448  
449 -
450 -== 3.5 System ==
451 -
452 -=== 3.5.1 System ~-~-> System Overview ===
453 -
454 -
455 455  Shows the system info:
456 456  
457 457  [[image:image-20220917144512-5.png||height="618" width="853"]]
458 458  
459 459  
460 -=== 3.5.2 System ~-~-> System General ===
461 461  
366 +=== **3.5.2 System ~-~-> Backup/Restore** ===
462 462  
463 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
464 464  
465 -In addition, Users can customize the FallBack IP address.
466 -
467 -[[image:image-20230214094058-3.png]]
468 -
469 -
470 -=== 3.5.3 System ~-~-> Backup/Restore ===
471 -
472 -
473 473  [[image:image-20220917144725-6.png||height="208" width="869"]]
474 474  
475 475  
476 -=== 3.5.4 System ~-~-> Remoteit ===
477 477  
373 += **4. Build-in Server** =
478 478  
479 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
480 480  
481 -
482 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
483 -
484 -[[image:image-20221230092303-2.png]]
485 -
486 -
487 -=== 3.5.5 System ~-~-> Package Management ===
488 -
489 -
490 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
491 -
492 -[[image:image-20230214094316-4.png]]
493 -
494 -
495 -= 4. Build-in Server =
496 -
497 -
498 498  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
499 499  
500 500  
501 -[[image:image-20230214095318-5.png||height="347" width="980"]]
379 +[[image:image-20220820115644-1.png||height="217" width="778"]]
502 502  
503 503  
504 504  (% style="color:red" %)**Note:**
... ... @@ -516,9 +516,10 @@
516 516   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
517 517  
518 518  
519 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
520 520  
398 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
521 521  
400 +
522 522  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
523 523  
524 524  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -534,19 +534,10 @@
534 534  [[image:image-20220725171719-1.png||height="570" width="769"]]
535 535  
536 536  
537 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
538 538  
417 +== **4.2 Application Server ~-~- Node-Red** ==
539 539  
540 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
541 541  
542 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
543 -
544 -[[image:image-20230321092456-1.png]]
545 -
546 -
547 -== 4.2 Application Server ~-~- Node-Red ==
548 -
549 -
550 550  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
551 551  
552 552  
... ... @@ -557,88 +557,16 @@
557 557  
558 558  
559 559  
560 -=== **Using Node-Red, InfluxDB and Grafana** ===
430 += **5. How users can access LPS8v2 using serial USB** =
561 561  
562 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
563 563  
433 +(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
564 564  
565 -the users can refer to this link to install them.
566 566  
567 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
436 +Port 1 of the UART on the LPS8v2 is GND
568 568  
569 -
570 -=== **Upgrade the node.js** ===
571 -
572 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
573 -
574 -
575 -the users can refer to this link to upgrade them.
576 -
577 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
578 -
579 -
580 -== 4.3 How to disable the built-in server ==
581 -
582 -
583 -Use the following commands to start and stop the TTNv3 service:
584 -
585 585  (% class="box infomessage" %)
586 586  (((
587 -**# start**
588 -systemctl start ttnstack
589 -
590 -**# stop**
591 -systemctl stop ttnstack
592 -
593 -**# enable**
594 -systemctl enable ttnstack
595 -
596 -**#disable**
597 -systemctl disable ttnstack
598 -)))
599 -
600 -Use the following commands to start and stop the Node-Red service:
601 -
602 -(% class="box infomessage" %)
603 -(((
604 -**# start**
605 -systemctl start nodered
606 -
607 -**# stop**
608 -systemctl stop nodered
609 -
610 -**# enable**
611 -systemctl enable nodered
612 -
613 -**#disable**
614 -systemctl disable nodered
615 -)))
616 -
617 -
618 -== 4.4 How to use ChirpStack on LPS8-V2 ==
619 -
620 -
621 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
622 -
623 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
624 -
625 -[[image:image-20230222094908-1.png||height="133" width="798"]]
626 -
627 -
628 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
629 -
630 -
631 -
632 -= 6. How users can access LPS8-V2 using serial USB =
633 -
634 -
635 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
636 -
637 -
638 -Port 1 of the UART on the LPS8-V2 is GND
639 -
640 -(% class="box infomessage" %)
641 -(((
642 642  **TXD  <~-~--> UART RXD (Gray line)**
643 643  
644 644  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -652,6 +652,7 @@
652 652  [[image:image-20220804163015-1.png||height="621" width="466"]]
653 653  
654 654  
453 +
655 655  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
656 656  
657 657  
... ... @@ -661,9 +661,10 @@
661 661  [[image:image-20220804164747-2.png||height="622" width="594"]]
662 662  
663 663  
664 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
665 665  
464 += **6. Use the helium gateway-rs as the Data-only Hotspot** =
666 666  
466 +
667 667  == **Step 1: Configure Frequency Band** ==
668 668  
669 669  
... ... @@ -758,20 +758,15 @@
758 758  So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
759 759  
760 760  
761 -= 8. OTA System Update =
762 762  
562 += **7. Trouble Shooting** =
763 763  
764 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
765 765  
565 +== 1). I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
766 766  
767 -= 9. Trouble Shooting =
768 768  
769 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
770 -
771 -
772 772  [[image:image-20220920135918-1.png]]
773 773  
774 -
775 775  This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
776 776  
777 777  By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
... ... @@ -784,31 +784,11 @@
784 784  [[image:image-20220920141936-2.png]]
785 785  
786 786  
787 -== 9.2  Fallback IP does not work, how can users check ==
788 788  
789 789  
790 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
584 += (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
791 791  
792 792  
793 -**1.Check whether the configuration is correct**
794 -
795 -Run the CMD command to ipconfig and ping 172.31.255.254.
796 -
797 -If this fails, the user needs to reconfigure.
798 -
799 -[[image:image-20230413170224-3.png||height="433" width="707"]]
800 -
801 -[[image:image-20230413170246-4.png]]
802 -
803 -
804 -**2. Check whether the firewall is disabled**
805 -
806 -If the firewall is not down, this will affect access to the gateway.
807 -
808 -
809 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
810 -
811 -
812 812  (((
813 813  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
814 814  )))
... ... @@ -817,9 +817,10 @@
817 817  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
818 818  
819 819  
820 -= 11. Reference =
821 821  
596 += **9. Reference** =
822 822  
598 +
823 823  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
824 824  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
825 825  
... ... @@ -826,7 +826,7 @@
826 826  
827 827  )))
828 828  
829 -= 12. Order Info =
605 += **10. Order Info** =
830 830  
831 831  
832 832  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -850,9 +850,10 @@
850 850  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
851 851  
852 852  
853 -= 13. Manufacturer Info =
854 854  
630 += **10. Manufacturer Info** =
855 855  
632 +
856 856  **Shenzhen Dragino Technology Development co. LTD**
857 857  
858 858  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -860,9 +860,10 @@
860 860  LongCheng Street, LongGang District ; Shenzhen 518116,China
861 861  
862 862  
863 -= 14. FCC Warning =
864 864  
641 += **11. FCC Warning** =
865 865  
643 +
866 866  (((
867 867  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
868 868  )))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -337.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0