Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 177.1 >
edited by Kilight Cao
on 2023/04/13 17:23
To version < 69.2 >
edited by Xiaoling
on 2022/07/28 16:38
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,39 +13,27 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
28 28  
29 -(((
30 30  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 34  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 42  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
34 +== **1.2 Specifications** ==
48 48  
36 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
57 +== **1.3 Features** ==
58 +
59 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -84,244 +84,117 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
78 +== **1.4 Block Diagram** ==
92 92  
93 93  
81 +== **1.5 LED Indicators** ==
82 +
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
86 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
89 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
92 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
94 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
96 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
98 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
111 111  
112 -== 1.6 Button Intruction ==
113 113  
101 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
104 += **2. Quick Start** =
117 117  
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 -
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 -
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
111 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 -=== 2.1.1 connect the network ===
139 139  
114 +== **2.1.1 connect the network.** ==
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
116 +=== ===
142 142  
118 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
143 143  
144 -(((
145 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 -)))
120 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 147  
148 -(((
149 149  You can also use this IP to connect.
150 -)))
151 151  
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
154 154  
127 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
155 155  
156 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
157 157  
130 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
158 158  
159 -[[image:image-20230107084650-2.png||height="310" width="839"]]
160 160  
133 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
161 161  
162 -(% style="color:blue" %)**Steps to connect via fallback IP:**
163 163  
164 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
136 +**Steps to connect via fallback IP:**
165 165  
166 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
138 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
167 167  
140 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
168 168  
169 -Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
142 +[[image:image-20220622101433-4.png]]
170 170  
171 171  
172 -As in the below photo:
145 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
173 173  
174 -[[image:image-20230413172038-1.png||height="732" width="1243"]]
175 175  
148 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
176 176  
177 -Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
178 178  
179 -If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
151 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
180 180  
181 181  
182 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
183 -
184 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
185 -
186 -
187 -
188 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
189 -
190 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
191 -
192 -
193 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
194 -
195 -
196 196  [[image:image-20220622102702-6.png]]
197 197  
198 198  
199 -
200 200  **Wi-Fi configuration successful**
201 201  
202 202  
203 203  [[image:image-20220622102847-7.png]]
204 204  
162 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
205 205  
206 -[[image:image-20220622102901-8.png||height="476" width="938"]]
207 207  
208 208  
209 -=== 2.1.2 Access Configure Web UI ===
210 210  
167 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
211 211  
212 -**Web Interface**
213 213  
214 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
170 +=== **2.2.1 Select your area frequency** ===
215 215  
216 -
217 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
218 -
219 -You will see the login interface of LPS8-V2 as shown below.
220 -
221 -The account details for Web Login are:
222 -
223 -(% style="color:#4f81bd" %)**User Name: root**
224 -
225 -(% style="color:#4f81bd" %)**Password:   dragino**
226 -
227 -[[image:image-20230106153501-1.png||height="367" width="894"]]
228 -
229 -
230 -== 2.2  Typical Network Setup ==
231 -
232 -=== 2.2.1  Overview ===
233 -
234 -
235 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
236 -
237 -* **WAN Port Internet Mode**
238 -* **WiFi Client Mode**
239 -* **Cellular Mode**
240 -
241 -=== 2.2.2  Use WAN port to access Internet ===
242 -
243 -
244 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
245 -
246 -
247 -[[image:image-20230411100633-2.png||height="501" width="935"]]
248 -
249 -
250 -=== 2.2.3  Access the Internet as a WiFi Client ===
251 -
252 -
253 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
254 -
255 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
256 -
257 -[[image:image-20230411095739-1.png||height="264" width="691"]]
258 -
259 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
260 -
261 -
262 -=== 2.2.4  Use built-in 4G modem for internet access ===
263 -
264 -
265 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**
266 -
267 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
268 -
269 -
270 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
271 -
272 -First, install the Micro SIM card as below direction
273 -
274 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
275 -
276 -
277 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
278 -
279 -
280 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
281 -
282 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
283 -
284 -
285 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
286 -
287 -
288 -=== 2.2.5  Check Internet connection ===
289 -
290 -In the **home** page, we can check the Internet connection.
291 -
292 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
293 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
294 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
295 -
296 -[[image:image-20230411101534-3.png||height="544" width="942"]]
297 -
298 -
299 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
300 -
301 -=== 2.3.1 Select your area frequency ===
302 -
303 -
304 -(((
305 305  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
306 306  
307 -
308 -)))
174 +[[image:image-20220622103332-9.png]]
309 309  
310 -[[image:image-20220622103332-9.png||height="485" width="938"]]
311 311  
177 +=== **2.2.2 Get the only gateway EUI** ===
312 312  
313 -=== 2.3.2 Get the only gateway EUI ===
314 -
315 -
316 316  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
317 317  
181 +[[image:image-20220622103355-10.png]]
318 318  
319 -[[image:image-20220622103355-10.png||height="698" width="949"]]
320 320  
184 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
321 321  
322 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
323 -
324 -
325 325  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
326 326  
327 327  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -334,14 +334,13 @@
334 334  [[image:image-20220622103956-12.png]]
335 335  
336 336  
337 -=== 2.3.3 Register the gateway to The Things Network ===
338 338  
199 +== 2.2.3 Register the gateway to The Things Network ==
339 339  
340 340  **Login to The Things Network**
341 341  
342 342  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
343 343  
344 -
345 345  **Add the gateway**
346 346  
347 347  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -350,466 +350,159 @@
350 350  **Get it online**
351 351  
352 352  
353 -= 3. Web Configure Pages =
213 += **3. Web Configure Pages** =
354 354  
355 -== 3.1 Home ==
356 356  
216 +== **3.1 Home** ==
357 357  
358 358  //Shows the system running status~://
359 359  
360 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
220 +== **3.2 LoRa Settings** ==
361 361  
362 362  
363 -== 3.2 LoRa Settings ==
223 +=== **3.2.1 LoRa ~-~-> LoRa** ===
364 364  
365 -=== 3.2.1 LoRa ~-~-> LoRa ===
366 366  
367 -
368 368  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
369 369  
370 370  //Different LPS8v2 hardware versions can support different frequency ranges~://
371 371  
372 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
230 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
373 373  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
374 374  
375 375  (% class="wikigeneratedid" %)
376 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
234 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
377 377  
378 -
379 379  (% class="wikigeneratedid" %)
380 380  [[image:image-20220616110739-1.png||height="372" width="682"]]
381 381  
382 382  
383 -(((
384 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
385 -)))
240 +//**Note ***: See this instruction for how to customize the frequency band~://
386 386  
242 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
387 387  
388 -== 3.3 LoRaWAN Settings ==
389 389  
390 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
245 +== **3.3 LoRaWAN Settings** ==
391 391  
392 392  
393 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
248 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
394 394  
395 395  
251 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
252 +
396 396  [[image:image-20220616111932-2.png||height="516" width="672"]]
397 397  
398 398  
399 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
256 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
400 400  
401 401  
402 402  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
403 403  
404 -
405 405  [[image:image-20220616113246-3.png||height="396" width="672"]]
406 406  
407 407  
408 -(((
409 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
410 -)))
264 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
411 411  
412 412  
413 -== 3.4 Network Settings ==
267 +== **3.4 Network Settings** ==
414 414  
415 -=== 3.4.1 Network ~-~-> WiFi ===
416 416  
270 +=== **3.4.1 Network ~-~-> WiFi** ===
417 417  
272 +
418 418  [[image:image-20220616114756-4.png||height="251" width="669"]]
419 419  
420 420  
421 -=== 3.4.2 Network ~-~-> System Status ===
276 +=== **3.4.2 Network ~-~-> System Status** ===
422 422  
423 423  
424 -[[image:image-20220820134112-2.png||height="539" width="668"]]
279 +[[image:image-20220616115229-5.png||height="548" width="665"]]
425 425  
426 426  
427 -=== 3.4.3 Network ~-~-> Network ===
282 +=== **3.4.3 Network ~-~-> Firewall** ===
428 428  
429 429  
430 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
285 +[[image:image-20220616115351-6.png||height="244" width="661"]]
431 431  
432 -[[image:image-20230214093657-2.png||height="333" width="858"]]
433 433  
288 +== **3.5 System** ==
434 434  
435 -=== 3.4.4 Network ~-~-> Cellular ===
436 436  
291 +=== **3.5.1  System ~-~-> System Overview** ===
437 437  
438 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
439 439  
440 -(% style="color:red" %)**Note: APN cannot be empty.**
441 -
442 -[[image:image-20230228115126-1.png]]
443 -
444 -
445 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
446 -
447 -[[image:image-20230228115535-2.png||height="478" width="888"]]
448 -
449 -
450 -== 3.5 System ==
451 -
452 -=== 3.5.1 System ~-~-> System Overview ===
453 -
454 -
455 455  Shows the system info:
456 456  
457 -[[image:image-20220917144512-5.png||height="618" width="853"]]
458 458  
297 +=== **3.5.2 System ~-~-> Backup/Restore** ===
459 459  
460 -=== 3.5.2 System ~-~-> System General ===
461 461  
300 +[[image:image-20220616115808-7.png||height="194" width="649"]]
462 462  
463 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
464 464  
465 -In addition, Users can customize the FallBack IP address.
466 466  
467 -[[image:image-20230214094058-3.png]]
304 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
468 468  
469 469  
470 -=== 3.5.3 System ~-~-> Backup/Restore ===
307 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
471 471  
309 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
472 472  
473 -[[image:image-20220917144725-6.png||height="208" width="869"]]
474 474  
312 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
475 475  
476 -=== 3.5.4 System ~-~-> Remoteit ===
477 477  
478 -
479 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
480 -
481 -
482 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
483 -
484 -[[image:image-20221230092303-2.png]]
485 -
486 -
487 -=== 3.5.5 System ~-~-> Package Management ===
488 -
489 -
490 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
491 -
492 -[[image:image-20230214094316-4.png]]
493 -
494 -
495 -= 4. Build-in Server =
496 -
497 -
498 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
499 -
500 -
501 -[[image:image-20230214095318-5.png||height="347" width="980"]]
502 -
503 -
504 -(% style="color:red" %)**Note:**
505 -
506 - **Path**: System ~-~-> Built-in Server
507 -
508 -
509 -**Troubleshooting:**
510 -
511 -
512 -**~ 1. URL does not jump properly**
513 -
514 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
515 -
516 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
517 -
518 -
519 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
520 -
521 -
522 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
523 -
524 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
525 -
526 -
527 527  Login account:
528 528  
529 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
317 +**User ID: ** (% class="mark" %)admin
530 530  
531 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
319 +**Password: ** (% class="mark" %)dragino
532 532  
533 533  
534 534  [[image:image-20220725171719-1.png||height="570" width="769"]]
535 535  
324 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
325 + You can complete the installation manually with the following command.(%%)**
536 536  
537 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
538 538  
539 -
540 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
541 -
542 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
543 -
544 -[[image:image-20230321092456-1.png]]
545 -
546 -
547 -== 4.2 Application Server ~-~- Node-Red ==
548 -
549 -
550 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
551 -
552 -
553 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
554 -
555 -
556 -[[image:image-20220725172124-3.png||height="610" width="843"]]
557 -
558 -
559 -
560 -=== **Using Node-Red, InfluxDB and Grafana** ===
561 -
562 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
563 -
564 -
565 -the users can refer to this link to install them.
566 -
567 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
568 -
569 -
570 -=== **Upgrade the node.js** ===
571 -
572 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
573 -
574 -
575 -the users can refer to this link to upgrade them.
576 -
577 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
578 -
579 -
580 -== 4.3 How to disable the built-in server ==
581 -
582 -
583 -Use the following commands to start and stop the TTNv3 service:
584 -
585 585  (% class="box infomessage" %)
586 586  (((
587 -**# start**
588 -systemctl start ttnstack
330 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
589 589  
590 -**# stop**
591 -systemctl stop ttnstack
592 -
593 -**# enable**
594 -systemctl enable ttnstack
595 -
596 -**#disable**
597 -systemctl disable ttnstack
332 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
598 598  )))
599 599  
600 -Use the following commands to start and stop the Node-Red service:
601 601  
602 -(% class="box infomessage" %)
603 -(((
604 -**# start**
605 -systemctl start nodered
336 += **5. Build-in Application Server ~-~- Node-Red** =
606 606  
607 -**# stop**
608 -systemctl stop nodered
609 609  
610 -**# enable**
611 -systemctl enable nodered
339 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
612 612  
613 -**#disable**
614 -systemctl disable nodered
615 -)))
341 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
616 616  
617 617  
618 -== 4.4 How to use ChirpStack on LPS8-V2 ==
344 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
619 619  
346 +[[image:image-20220725172124-3.png||height="610" width="843"]]
620 620  
621 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
622 622  
623 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
624 624  
625 -[[image:image-20230222094908-1.png||height="133" width="798"]]
350 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
351 + You can complete the installation manually with the following command.(%%)**
626 626  
627 627  
628 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
629 -
630 -
631 -
632 -= 6. How users can access LPS8-V2 using serial USB =
633 -
634 -
635 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
636 -
637 -
638 -Port 1 of the UART on the LPS8-V2 is GND
639 -
640 640  (% class="box infomessage" %)
641 641  (((
642 -**TXD  <~-~--> UART RXD (Gray line)**
643 -
644 -**RXD  <~-~--> UART TXD (White line)**
645 -
646 -**GND <~-~--> GND (Black line)**
356 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
357 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
647 647  )))
648 648  
360 +[[image:image-20220728102000-1.png]]
649 649  
650 -**LPS8v2 UART connection photo**
651 651  
652 -[[image:image-20220804163015-1.png||height="621" width="466"]]
363 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
653 653  
654 -
655 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
656 -
657 -
658 -[[image:image-20220804164928-3.png||height="320" width="332"]]
659 -
660 -
661 -[[image:image-20220804164747-2.png||height="622" width="594"]]
662 -
663 -
664 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
665 -
666 -
667 -== **Step 1: Configure Frequency Band** ==
668 -
669 -
670 -//Each country has a requirement for frequency region. Choose the right one for your area.//
671 -
672 -[[image:image-20220905164308-1.png]]
673 -
674 -
675 -
676 -== **Step 2: Configure the forward address** ==
677 -
678 -
679 -**Select one of the servers to configure.**
680 -
681 -**For example:**
682 -
683 -[[image:image-20220905164847-2.png]]
684 -
685 -
686 -
687 -== **Step 3: Download and Install the Helium-gateway-rs** ==
688 -
689 -
690 -**Access the gateway CLI via SSH.**
691 -
692 -[[image:image-20220905165222-3.png]]
693 -
694 -
695 -**Download gateway-rs.**
696 -
697 -[[image:image-20220905165715-5.png]]
698 -
699 -(% class="box infomessage" %)
700 700  (((
701 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
702 -)))
703 -
704 -
705 -**Install gateway-rs.**
706 -
707 -[[image:image-20220905165917-7.png]]
708 -
709 -(% class="box infomessage" %)
710 -(((
711 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
712 -)))
713 -
714 -
715 -**Modify configuration.**
716 -
717 -
718 -[[image:image-20220905173847-12.png]]
719 -
720 -
721 -(% class="box infomessage" %)
722 -(((
723 -**region=<Enter regional parameters> \
724 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
725 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
726 -)))
727 -
728 -
729 -**Restart the helium_gateway**
730 -
731 -[[image:image-20220905170920-9.png]]
732 -
733 -
734 -(% class="box infomessage" %)
735 -(((
736 -**systemctl restart helium_gateway**
737 -)))
738 -
739 -
740 -**Check the helium_gateway Log：**
741 -
742 -[[image:image-20220905173952-13.png]]
743 -
744 -
745 -(% class="box infomessage" %)
746 -(((
747 -**journalctl -u helium_gateway -f**
748 -)))
749 -
750 -
751 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
752 -
753 -where the helium gateway log is shown:
754 -
755 -[[image:image-20220905174534-14.png]]
756 -
757 -
758 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
759 -
760 -
761 -= 8. OTA System Update =
762 -
763 -
764 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
765 -
766 -
767 -= 9. Trouble Shooting =
768 -
769 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
770 -
771 -
772 -[[image:image-20220920135918-1.png]]
773 -
774 -
775 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
776 -
777 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
778 -
779 -
780 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
781 -
782 -**Click the update URL button to configure the URL with the current eth port address.**
783 -
784 -[[image:image-20220920141936-2.png]]
785 -
786 -
787 -== 9.2  Fallback IP does not work, how can users check ==
788 -
789 -
790 -When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
791 -
792 -
793 -**1.Check whether the configuration is correct**
794 -
795 -Run the CMD command to ipconfig and ping 172.31.255.254.
796 -
797 -If this fails, the user needs to reconfigure.
798 -
799 -[[image:image-20230413170224-3.png||height="433" width="707"]]
800 -
801 -[[image:image-20230413170246-4.png]]
802 -
803 -
804 -**2. Check whether the firewall is disabled**
805 -
806 -If the firewall is not down, this will affect access to the gateway.
807 -
808 -
809 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
810 -
811 -
812 -(((
813 813  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
814 814  )))
815 815  
... ... @@ -817,42 +817,38 @@
817 817  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
818 818  
819 819  
820 -= 11. Reference =
373 += **11 Reference** =
821 821  
822 -
823 823  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
824 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
825 825  
826 826  
827 827  )))
828 828  
829 -= 12. Order Info =
380 += **12. Order Info** =
830 830  
831 -
832 832  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
833 833  
834 834  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
835 835  
836 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
837 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
838 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
839 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
840 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
841 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
386 +* **AS923**: LoRaWAN AS923 band
387 +* **AU915**: LoRaWAN AU915 band
388 +* **EU868**: LoRaWAN EU868 band
389 +* **KR920**: LoRaWAN KR920 band
390 +* **US915**: LoRaWAN US915 band
391 +* **IN865**: LoRaWAN IN865 band
842 842  
843 843  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
844 844  
845 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
846 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
847 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
848 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
395 +* ** E**: EMEA, Korea, Thailand, India.
396 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
397 +* ** AU**: Latin America, New Zeland, Taiwan
398 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
849 849  
850 850  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
851 851  
852 852  
853 -= 13. Manufacturer Info =
403 += **13. Manufacturer Info** =
854 854  
855 -
856 856  **Shenzhen Dragino Technology Development co. LTD**
857 857  
858 858  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -860,38 +860,21 @@
860 860  LongCheng Street, LongGang District ; Shenzhen 518116,China
861 861  
862 862  
863 -= 14. FCC Warning =
412 += **14. FCC Warning** =
864 864  
865 -
866 -(((
867 867  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
868 -)))
869 869  
870 -(((
871 871  ~-~- Reorient or relocate the receiving antenna.
872 -)))
873 873  
874 -(((
875 875  ~-~- Increase the separation between the equipment and receiver.
876 -)))
877 877  
878 -(((
879 879  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
880 -)))
881 881  
882 -(((
883 883  ~-~- Consult the dealer or an experienced radio/TV technician for help.
884 -)))
885 885  
886 886  
887 -(((
888 888  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
889 -)))
890 890  
891 891  
892 -(((
893 893  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
894 -
895 -
896 896  )))
897 -)))
fallback ip.mp4
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -5.1 MB
Content
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0