Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 165.1 >
edited by Kilight Cao
on 2023/04/11 10:27
To version < 69.1 >
edited by Xiaoye
on 2022/07/28 10:20
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -1,9 +2,8 @@
1 -(% style="text-align:center" %)
2 2  [[image:image-20220620202334-2.png||height="467" width="809"]]
3 3  
4 4  
5 5  (((
6 -
5 +**LPS8v2 User Manual**
7 7  
8 8  
9 9  )))
... ... @@ -12,63 +12,44 @@
12 12  
13 13  {{toc/}}
14 14  
14 += **1. Introduction** =
15 15  
16 +== **1.1 What is LPS8v2** ==
16 16  
17 -
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
28 28  
29 -(((
30 30  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 34  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 42  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
44 44  
45 45  
46 -== 1.2 Specifications ==
30 +== **1.2 Specifications** ==
47 47  
32 +**Hardware System:**
48 48  
49 -(% style="color:#037691" %)**Hardware System:**
50 -
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
55 -(% style="color:#037691" %)**Interface:**
38 +**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 -(% style="color:#037691" %)**Operating Condition:**
44 +**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
46 +* Work Temperature: -20 ~~ 65°C
47 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
50 +== **1.3 Features** ==
70 70  
71 -
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -81,237 +81,117 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
64 +* Built-in //**The Things Network**// local LoRaWAN server
65 +* Built-in  //**Node-Red**// local Application server
86 86  
87 -== 1.4 Block Diagram ==
67 +== **1.4 Block Diagram** ==
88 88  
89 89  
70 +== **1.5 LED Indicators** ==
90 90  
91 -== 1.5 LED Indicators ==
92 -
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
75 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
78 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
81 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
83 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
87 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
111 111  
112 -== 1.6 Button Intruction ==
113 113  
90 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
93 += **2. Quick Start** =
117 117  
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 -
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 -
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
100 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 -=== 2.1.1 connect the network ===
139 139  
103 +== **2.1.1 connect the network.** ==
140 140  
141 -==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
105 +=== ===
142 142  
107 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
143 143  
144 -(((
145 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 -)))
109 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 147  
148 -(((
149 149  You can also use this IP to connect.
150 -)))
151 151  
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
154 154  
155 -==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
116 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
156 156  
157 157  
158 -[[image:image-20230107084650-2.png||height="310" width="839"]]
119 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
159 159  
160 160  
161 -(% style="color:blue" %)**Steps to connect via fallback IP:**
122 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
162 162  
163 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
164 164  
165 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
125 +**Steps to connect via fallback IP:**
166 166  
167 -As in the below photo:
127 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
168 168  
169 -[[image:image-20230107085904-4.png||height="443" width="361"]]
129 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
170 170  
171 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
131 +[[image:image-20220622101433-4.png]]
172 172  
173 173  
174 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
134 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
175 175  
176 176  
137 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
177 177  
178 -==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
179 179  
140 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
180 180  
181 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 -
184 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
185 -
186 -
187 187  [[image:image-20220622102702-6.png]]
188 188  
189 189  
190 -
191 191  **Wi-Fi configuration successful**
192 192  
193 193  
194 194  [[image:image-20220622102847-7.png]]
195 195  
151 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
196 196  
197 -[[image:image-20220622102901-8.png||height="476" width="938"]]
198 198  
199 199  
200 -=== 2.1.2 Access Configure Web UI ===
201 201  
156 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
202 202  
203 -**Web Interface**
204 204  
205 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
159 +=== **2.2.1 Select your area frequency** ===
206 206  
207 -
208 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
209 -
210 -You will see the login interface of LPS8-V2 as shown below.
211 -
212 -The account details for Web Login are:
213 -
214 -(% style="color:#4f81bd" %)**User Name: root**
215 -
216 -(% style="color:#4f81bd" %)**Password:   dragino**
217 -
218 -[[image:image-20230106153501-1.png||height="367" width="894"]]
219 -
220 -== 2.2  Typical Network Setup ==
221 -
222 -=== 2.2.1  Overview ===
223 -
224 -
225 -LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
226 -
227 -* **WAN Port Internet Mode**
228 -* **WiFi Client Mode**
229 -* **Cellular Mode**
230 -
231 -=== 2.2.2  Use WAN port to access Internet ===
232 -
233 -
234 -By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
235 -
236 -
237 -[[image:image-20230411100633-2.png||height="501" width="935"]]
238 -
239 -
240 -=== 2.2.3  Access the Internet as a WiFi Client ===
241 -
242 -
243 -In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
244 -
245 -The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
246 -
247 -[[image:image-20230411095739-1.png||height="264" width="691"]]
248 -
249 -In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
250 -
251 -
252 -=== 2.2.4  Use built-in 4G modem for internet access ===
253 -
254 -
255 -(% style="color:blue" %)**Since Hardware version HP0C 1.4**(%%)
256 -
257 -Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
258 -
259 -
260 -If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
261 -
262 -First, install the Micro SIM card as below direction
263 -
264 -Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
265 -
266 -
267 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
268 -
269 -
270 -The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
271 -
272 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
273 -
274 -
275 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
276 -
277 -
278 -=== 2.2.5  Check Internet connection ===
279 -
280 -In the **home** page, we can check the Internet connection.
281 -
282 -* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
283 -* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
284 -* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
285 -
286 -[[image:image-20230411101534-3.png||height="544" width="942"]]
287 -
288 -
289 -== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
290 -
291 -=== 2.3.1 Select your area frequency ===
292 -
293 -
294 -(((
295 295  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
296 296  
297 -
298 -)))
163 +[[image:image-20220622103332-9.png]]
299 299  
300 -[[image:image-20220622103332-9.png||height="485" width="938"]]
301 301  
166 +=== **2.2.2 Get the only gateway EUI** ===
302 302  
303 -=== 2.3.2 Get the only gateway EUI ===
304 -
305 -
306 306  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
307 307  
170 +[[image:image-20220622103355-10.png]]
308 308  
309 -[[image:image-20220622103355-10.png||height="698" width="949"]]
310 310  
173 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
311 311  
312 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
313 -
314 -
315 315  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
316 316  
317 317  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -324,14 +324,13 @@
324 324  [[image:image-20220622103956-12.png]]
325 325  
326 326  
327 -=== 2.3.3 Register the gateway to The Things Network ===
328 328  
188 +== 2.2.3 Register the gateway to The Things Network ==
329 329  
330 330  **Login to The Things Network**
331 331  
332 332  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
333 333  
334 -
335 335  **Add the gateway**
336 336  
337 337  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -340,444 +340,159 @@
340 340  **Get it online**
341 341  
342 342  
343 -= 3. Web Configure Pages =
202 += **3. Web Configure Pages** =
344 344  
345 -== 3.1 Home ==
346 346  
205 +== **3.1 Home** ==
347 347  
348 348  //Shows the system running status~://
349 349  
350 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
209 +== **3.2 LoRa Settings** ==
351 351  
352 352  
353 -== 3.2 LoRa Settings ==
212 +=== **3.2.1 LoRa ~-~-> LoRa** ===
354 354  
355 -=== 3.2.1 LoRa ~-~-> LoRa ===
356 356  
357 -
358 358  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
359 359  
360 360  //Different LPS8v2 hardware versions can support different frequency ranges~://
361 361  
362 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
219 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
363 363  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
364 364  
365 365  (% class="wikigeneratedid" %)
366 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
223 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
367 367  
368 -
369 369  (% class="wikigeneratedid" %)
370 370  [[image:image-20220616110739-1.png||height="372" width="682"]]
371 371  
372 372  
373 -(((
374 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
375 -)))
229 +//**Note ***: See this instruction for how to customize the frequency band~://
376 376  
231 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
377 377  
378 -== 3.3 LoRaWAN Settings ==
379 379  
380 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
234 +== **3.3 LoRaWAN Settings** ==
381 381  
382 382  
383 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
237 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
384 384  
385 385  
240 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
241 +
386 386  [[image:image-20220616111932-2.png||height="516" width="672"]]
387 387  
388 388  
389 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
245 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
390 390  
391 391  
392 392  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
393 393  
394 -
395 395  [[image:image-20220616113246-3.png||height="396" width="672"]]
396 396  
397 397  
398 -(((
399 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
400 -)))
253 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
401 401  
402 402  
403 -== 3.4 Network Settings ==
256 +== **3.4 Network Settings** ==
404 404  
405 -=== 3.4.1 Network ~-~-> WiFi ===
406 406  
259 +=== **3.4.1 Network ~-~-> WiFi** ===
407 407  
261 +
408 408  [[image:image-20220616114756-4.png||height="251" width="669"]]
409 409  
410 410  
411 -=== 3.4.2 Network ~-~-> System Status ===
265 +=== **3.4.2 Network ~-~-> System Status** ===
412 412  
413 413  
414 -[[image:image-20220820134112-2.png||height="539" width="668"]]
268 +[[image:image-20220616115229-5.png||height="548" width="665"]]
415 415  
416 416  
417 -=== 3.4.3 Network ~-~-> Network ===
271 +=== **3.4.3 Network ~-~-> Firewall** ===
418 418  
419 419  
420 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
274 +[[image:image-20220616115351-6.png||height="244" width="661"]]
421 421  
422 -[[image:image-20230214093657-2.png||height="333" width="858"]]
423 423  
277 +== **3.5 System** ==
424 424  
425 -=== 3.4.4 Network ~-~-> Cellular ===
426 426  
280 +=== **3.5.1  System ~-~-> System Overview** ===
427 427  
428 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
429 429  
430 -(% style="color:red" %)**Note: APN cannot be empty.**
431 -
432 -[[image:image-20230228115126-1.png]]
433 -
434 -
435 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
436 -
437 -[[image:image-20230228115535-2.png||height="478" width="888"]]
438 -
439 -
440 -== 3.5 System ==
441 -
442 -=== 3.5.1 System ~-~-> System Overview ===
443 -
444 -
445 445  Shows the system info:
446 446  
447 -[[image:image-20220917144512-5.png||height="618" width="853"]]
448 448  
286 +=== **3.5.2 System ~-~-> Backup/Restore** ===
449 449  
450 -=== 3.5.2 System ~-~-> System General ===
451 451  
289 +[[image:image-20220616115808-7.png||height="194" width="649"]]
452 452  
453 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
454 454  
455 -In addition, Users can customize the FallBack IP address.
456 456  
457 -[[image:image-20230214094058-3.png]]
293 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
458 458  
459 459  
460 -=== 3.5.3 System ~-~-> Backup/Restore ===
296 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
461 461  
298 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
462 462  
463 -[[image:image-20220917144725-6.png||height="208" width="869"]]
464 464  
301 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
465 465  
466 -=== 3.5.4 System ~-~-> Remoteit ===
467 467  
468 -
469 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
470 -
471 -
472 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
473 -
474 -[[image:image-20221230092303-2.png]]
475 -
476 -
477 -=== 3.5.5 System ~-~-> Package Management ===
478 -
479 -
480 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
481 -
482 -[[image:image-20230214094316-4.png]]
483 -
484 -
485 -= 4. Build-in Server =
486 -
487 -
488 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
489 -
490 -
491 -[[image:image-20230214095318-5.png||height="347" width="980"]]
492 -
493 -
494 -(% style="color:red" %)**Note:**
495 -
496 - **Path**: System ~-~-> Built-in Server
497 -
498 -
499 -**Troubleshooting:**
500 -
501 -
502 -**~ 1. URL does not jump properly**
503 -
504 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
505 -
506 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
507 -
508 -
509 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
510 -
511 -
512 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
513 -
514 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
515 -
516 -
517 517  Login account:
518 518  
519 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
306 +**User ID: ** (% class="mark" %)admin
520 520  
521 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
308 +**Password: ** (% class="mark" %)dragino
522 522  
523 523  
524 524  [[image:image-20220725171719-1.png||height="570" width="769"]]
525 525  
313 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
314 + You can complete the installation manually with the following command.(%%)**
526 526  
527 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
528 528  
529 -
530 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
531 -
532 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
533 -
534 -[[image:image-20230321092456-1.png]]
535 -
536 -
537 -== 4.2 Application Server ~-~- Node-Red ==
538 -
539 -
540 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
541 -
542 -
543 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
544 -
545 -
546 -[[image:image-20220725172124-3.png||height="610" width="843"]]
547 -
548 -
549 -
550 -=== **Using Node-Red, InfluxDB and Grafana** ===
551 -
552 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
553 -
554 -
555 -the users can refer to this link to install them.
556 -
557 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
558 -
559 -
560 -=== **Upgrade the node.js** ===
561 -
562 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
563 -
564 -
565 -the users can refer to this link to upgrade them.
566 -
567 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
568 -
569 -
570 -== 4.3 How to disable the built-in server ==
571 -
572 -
573 -Use the following commands to start and stop the TTNv3 service:
574 -
575 575  (% class="box infomessage" %)
576 576  (((
577 -**# start**
578 -systemctl start ttnstack
319 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
579 579  
580 -**# stop**
581 -systemctl stop ttnstack
582 -
583 -**# enable**
584 -systemctl enable ttnstack
585 -
586 -**#disable**
587 -systemctl disable ttnstack
321 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
588 588  )))
589 589  
590 -Use the following commands to start and stop the Node-Red service:
591 591  
592 -(% class="box infomessage" %)
593 -(((
594 -**# start**
595 -systemctl start nodered
325 += **5. Build-in Application Server ~-~- Node-Red** =
596 596  
597 -**# stop**
598 -systemctl stop nodered
599 599  
600 -**# enable**
601 -systemctl enable nodered
328 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
602 602  
603 -**#disable**
604 -systemctl disable nodered
605 -)))
330 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
606 606  
607 607  
608 -== 4.4 How to use ChirpStack on LPS8-V2 ==
333 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
609 609  
335 +[[image:image-20220725172124-3.png||height="610" width="843"]]
610 610  
611 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
612 612  
613 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
614 614  
615 -[[image:image-20230222094908-1.png||height="133" width="798"]]
339 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
340 + You can complete the installation manually with the following command.(%%)**
616 616  
617 617  
618 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
619 -
620 -
621 -
622 -= 6. How users can access LPS8-V2 using serial USB =
623 -
624 -
625 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
626 -
627 -
628 -Port 1 of the UART on the LPS8-V2 is GND
629 -
630 630  (% class="box infomessage" %)
631 631  (((
632 -**TXD  <~-~--> UART RXD (Gray line)**
633 -
634 -**RXD  <~-~--> UART TXD (White line)**
635 -
636 -**GND <~-~--> GND (Black line)**
345 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
346 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
637 637  )))
638 638  
349 +[[image:image-20220728102000-1.png]]
639 639  
640 -**LPS8v2 UART connection photo**
641 641  
642 -[[image:image-20220804163015-1.png||height="621" width="466"]]
352 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
643 643  
644 -
645 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
646 -
647 -
648 -[[image:image-20220804164928-3.png||height="320" width="332"]]
649 -
650 -
651 -[[image:image-20220804164747-2.png||height="622" width="594"]]
652 -
653 -
654 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
655 -
656 -
657 -== **Step 1: Configure Frequency Band** ==
658 -
659 -
660 -//Each country has a requirement for frequency region. Choose the right one for your area.//
661 -
662 -[[image:image-20220905164308-1.png]]
663 -
664 -
665 -
666 -== **Step 2: Configure the forward address** ==
667 -
668 -
669 -**Select one of the servers to configure.**
670 -
671 -**For example:**
672 -
673 -[[image:image-20220905164847-2.png]]
674 -
675 -
676 -
677 -== **Step 3: Download and Install the Helium-gateway-rs** ==
678 -
679 -
680 -**Access the gateway CLI via SSH.**
681 -
682 -[[image:image-20220905165222-3.png]]
683 -
684 -
685 -**Download gateway-rs.**
686 -
687 -[[image:image-20220905165715-5.png]]
688 -
689 -(% class="box infomessage" %)
690 690  (((
691 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
692 -)))
693 -
694 -
695 -**Install gateway-rs.**
696 -
697 -[[image:image-20220905165917-7.png]]
698 -
699 -(% class="box infomessage" %)
700 -(((
701 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
702 -)))
703 -
704 -
705 -**Modify configuration.**
706 -
707 -
708 -[[image:image-20220905173847-12.png]]
709 -
710 -
711 -(% class="box infomessage" %)
712 -(((
713 -**region=<Enter regional parameters> \
714 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
715 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
716 -)))
717 -
718 -
719 -**Restart the helium_gateway**
720 -
721 -[[image:image-20220905170920-9.png]]
722 -
723 -
724 -(% class="box infomessage" %)
725 -(((
726 -**systemctl restart helium_gateway**
727 -)))
728 -
729 -
730 -**Check the helium_gateway Log：**
731 -
732 -[[image:image-20220905173952-13.png]]
733 -
734 -
735 -(% class="box infomessage" %)
736 -(((
737 -**journalctl -u helium_gateway -f**
738 -)))
739 -
740 -
741 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
742 -
743 -where the helium gateway log is shown:
744 -
745 -[[image:image-20220905174534-14.png]]
746 -
747 -
748 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
749 -
750 -
751 -= 8. OTA System Update =
752 -
753 -
754 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
755 -
756 -
757 -= 9. Trouble Shooting =
758 -
759 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
760 -
761 -
762 -[[image:image-20220920135918-1.png]]
763 -
764 -
765 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
766 -
767 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
768 -
769 -
770 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
771 -
772 -**Click the update URL button to configure the URL with the current eth port address.**
773 -
774 -[[image:image-20220920141936-2.png]]
775 -
776 -
777 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
778 -
779 -
780 -(((
781 781  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
782 782  )))
783 783  
... ... @@ -785,42 +785,38 @@
785 785  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
786 786  
787 787  
788 -= 11. Reference =
362 += **11 Reference** =
789 789  
790 -
791 791  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
792 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
793 793  
794 794  
795 795  )))
796 796  
797 -= 12. Order Info =
369 += **12. Order Info** =
798 798  
799 -
800 800  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
801 801  
802 802  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
803 803  
804 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
805 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
806 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
807 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
808 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
809 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
375 +* **AS923**: LoRaWAN AS923 band
376 +* **AU915**: LoRaWAN AU915 band
377 +* **EU868**: LoRaWAN EU868 band
378 +* **KR920**: LoRaWAN KR920 band
379 +* **US915**: LoRaWAN US915 band
380 +* **IN865**: LoRaWAN IN865 band
810 810  
811 811  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
812 812  
813 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
814 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
815 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
816 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
384 +* ** E**: EMEA, Korea, Thailand, India.
385 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
386 +* ** AU**: Latin America, New Zeland, Taiwan
387 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
817 817  
818 818  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
819 819  
820 820  
821 -= 13. Manufacturer Info =
392 += **13. Manufacturer Info** =
822 822  
823 -
824 824  **Shenzhen Dragino Technology Development co. LTD**
825 825  
826 826  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -828,38 +828,21 @@
828 828  LongCheng Street, LongGang District ; Shenzhen 518116,China
829 829  
830 830  
831 -= 14. FCC Warning =
401 += **14. FCC Warning** =
832 832  
833 -
834 -(((
835 835  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
836 -)))
837 837  
838 -(((
839 839  ~-~- Reorient or relocate the receiving antenna.
840 -)))
841 841  
842 -(((
843 843  ~-~- Increase the separation between the equipment and receiver.
844 -)))
845 845  
846 -(((
847 847  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
848 -)))
849 849  
850 -(((
851 851  ~-~- Consult the dealer or an experienced radio/TV technician for help.
852 -)))
853 853  
854 854  
855 -(((
856 856  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
857 -)))
858 858  
859 859  
860 -(((
861 861  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
862 -
863 -
864 864  )))
865 -)))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -404.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0