Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 161.1 >
edited by Kilight Cao
on 2023/04/01 09:01
To version < 69.2 >
edited by Xiaoling
on 2022/07/28 16:38
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,39 +13,27 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
28 28  
29 -(((
30 30  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 34  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 42  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
34 +== **1.2 Specifications** ==
48 48  
36 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,18 +57,18 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
51 +* Work Temperature: -20 ~~ 65°C
52 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
57 +== **1.3 Features** ==
58 +
59 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -84,166 +84,117 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
87 -== 1.4 Block Diagram ==
88 88  
89 89  
90 90  
91 -== 1.5 LED Indicators ==
78 +== **1.4 Block Diagram** ==
92 92  
93 93  
81 +== **1.5 LED Indicators** ==
82 +
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
86 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
89 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
92 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
94 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
96 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
98 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
111 111  
112 -== 1.6 Button Intruction ==
113 113  
101 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
104 += **2. Quick Start** =
117 117  
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 -
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 -
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
111 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 -== 2.1.1 connect the network ==
139 139  
114 +== **2.1.1 connect the network.** ==
140 140  
141 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
116 +=== ===
142 142  
118 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
143 143  
144 -(((
145 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 -)))
120 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 147  
148 -(((
149 149  You can also use this IP to connect.
150 -)))
151 151  
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
154 154  
155 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
127 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
156 156  
157 157  
158 -[[image:image-20230107084650-2.png||height="310" width="839"]]
130 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
159 159  
160 160  
161 -(% style="color:blue" %)**Steps to connect via fallback IP:**
133 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
162 162  
163 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
164 164  
165 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
136 +**Steps to connect via fallback IP:**
166 166  
167 -As in the below photo:
138 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
168 168  
169 -[[image:image-20230107085904-4.png||height="443" width="361"]]
140 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
170 170  
171 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
142 +[[image:image-20220622101433-4.png]]
172 172  
173 173  
174 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
145 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
175 175  
176 176  
148 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
177 177  
178 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
179 179  
151 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
180 180  
181 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 -
184 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
185 -
186 -
187 187  [[image:image-20220622102702-6.png]]
188 188  
189 189  
190 -
191 191  **Wi-Fi configuration successful**
192 192  
193 193  
194 194  [[image:image-20220622102847-7.png]]
195 195  
162 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
196 196  
197 -[[image:image-20220622102901-8.png||height="476" width="938"]]
198 198  
199 199  
200 -== 2.1.2 Access Configure Web UI ==
201 201  
167 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
202 202  
203 -**Web Interface**
204 204  
205 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
170 +=== **2.2.1 Select your area frequency** ===
206 206  
207 -
208 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
209 -
210 -You will see the login interface of LPS8-V2 as shown below.
211 -
212 -The account details for Web Login are:
213 -
214 -(% style="color:#4f81bd" %)**User Name: root**
215 -
216 -(% style="color:#4f81bd" %)**Password:   dragino**
217 -
218 -[[image:image-20230106153501-1.png||height="367" width="894"]]
219 -
220 -
221 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
222 -
223 -=== 2.2.1 Select your area frequency ===
224 -
225 -
226 -(((
227 227  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
228 228  
229 -
230 -)))
174 +[[image:image-20220622103332-9.png]]
231 231  
232 -[[image:image-20220622103332-9.png||height="485" width="938"]]
233 233  
177 +=== **2.2.2 Get the only gateway EUI** ===
234 234  
235 -=== 2.2.2 Get the only gateway EUI ===
236 -
237 -
238 238  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
239 239  
181 +[[image:image-20220622103355-10.png]]
240 240  
241 -[[image:image-20220622103355-10.png||height="698" width="949"]]
242 242  
184 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
243 243  
244 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
245 -
246 -
247 247  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
248 248  
249 249  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -256,14 +256,13 @@
256 256  [[image:image-20220622103956-12.png]]
257 257  
258 258  
259 -=== 2.2.3 Register the gateway to The Things Network ===
260 260  
199 +== 2.2.3 Register the gateway to The Things Network ==
261 261  
262 262  **Login to The Things Network**
263 263  
264 264  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
265 265  
266 -
267 267  **Add the gateway**
268 268  
269 269  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -272,444 +272,159 @@
272 272  **Get it online**
273 273  
274 274  
275 -= 3. Web Configure Pages =
213 += **3. Web Configure Pages** =
276 276  
277 -== 3.1 Home ==
278 278  
216 +== **3.1 Home** ==
279 279  
280 280  //Shows the system running status~://
281 281  
282 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
220 +== **3.2 LoRa Settings** ==
283 283  
284 284  
285 -== 3.2 LoRa Settings ==
223 +=== **3.2.1 LoRa ~-~-> LoRa** ===
286 286  
287 -=== 3.2.1 LoRa ~-~-> LoRa ===
288 288  
289 -
290 290  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
291 291  
292 292  //Different LPS8v2 hardware versions can support different frequency ranges~://
293 293  
294 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
230 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
295 295  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
296 296  
297 297  (% class="wikigeneratedid" %)
298 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
234 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
299 299  
300 -
301 301  (% class="wikigeneratedid" %)
302 302  [[image:image-20220616110739-1.png||height="372" width="682"]]
303 303  
304 304  
305 -(((
306 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
307 -)))
240 +//**Note ***: See this instruction for how to customize the frequency band~://
308 308  
242 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
309 309  
310 -== 3.3 LoRaWAN Settings ==
311 311  
312 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
245 +== **3.3 LoRaWAN Settings** ==
313 313  
314 314  
315 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
248 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
316 316  
317 317  
251 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
252 +
318 318  [[image:image-20220616111932-2.png||height="516" width="672"]]
319 319  
320 320  
321 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
256 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
322 322  
323 323  
324 324  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
325 325  
326 -
327 327  [[image:image-20220616113246-3.png||height="396" width="672"]]
328 328  
329 329  
330 -(((
331 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
332 -)))
264 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
333 333  
334 334  
335 -== 3.4 Network Settings ==
267 +== **3.4 Network Settings** ==
336 336  
337 -=== 3.4.1 Network ~-~-> WiFi ===
338 338  
270 +=== **3.4.1 Network ~-~-> WiFi** ===
339 339  
272 +
340 340  [[image:image-20220616114756-4.png||height="251" width="669"]]
341 341  
342 342  
343 -=== 3.4.2 Network ~-~-> System Status ===
276 +=== **3.4.2 Network ~-~-> System Status** ===
344 344  
345 345  
346 -[[image:image-20220820134112-2.png||height="539" width="668"]]
279 +[[image:image-20220616115229-5.png||height="548" width="665"]]
347 347  
348 348  
349 -=== 3.4.3 Network ~-~-> Network ===
282 +=== **3.4.3 Network ~-~-> Firewall** ===
350 350  
351 351  
352 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
285 +[[image:image-20220616115351-6.png||height="244" width="661"]]
353 353  
354 -[[image:image-20230214093657-2.png||height="333" width="858"]]
355 355  
288 +== **3.5 System** ==
356 356  
357 -=== 3.4.4 Network ~-~-> Cellular ===
358 358  
291 +=== **3.5.1  System ~-~-> System Overview** ===
359 359  
360 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
361 361  
362 -(% style="color:red" %)**Note: APN cannot be empty.**
363 -
364 -[[image:image-20230228115126-1.png]]
365 -
366 -
367 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
368 -
369 -[[image:image-20230228115535-2.png||height="478" width="888"]]
370 -
371 -
372 -== 3.5 System ==
373 -
374 -=== 3.5.1 System ~-~-> System Overview ===
375 -
376 -
377 377  Shows the system info:
378 378  
379 -[[image:image-20220917144512-5.png||height="618" width="853"]]
380 380  
297 +=== **3.5.2 System ~-~-> Backup/Restore** ===
381 381  
382 -=== 3.5.2 System ~-~-> System General ===
383 383  
300 +[[image:image-20220616115808-7.png||height="194" width="649"]]
384 384  
385 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
386 386  
387 -In addition, Users can customize the FallBack IP address.
388 388  
389 -[[image:image-20230214094058-3.png]]
304 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
390 390  
391 391  
392 -=== 3.5.3 System ~-~-> Backup/Restore ===
307 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
393 393  
309 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
394 394  
395 -[[image:image-20220917144725-6.png||height="208" width="869"]]
396 396  
312 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
397 397  
398 -=== 3.5.4 System ~-~-> Remoteit ===
399 399  
400 -
401 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
402 -
403 -
404 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
405 -
406 -[[image:image-20221230092303-2.png]]
407 -
408 -
409 -=== 3.5.5 System ~-~-> Package Management ===
410 -
411 -
412 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
413 -
414 -[[image:image-20230214094316-4.png]]
415 -
416 -
417 -= 4. Build-in Server =
418 -
419 -
420 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
421 -
422 -
423 -[[image:image-20230214095318-5.png||height="347" width="980"]]
424 -
425 -
426 -(% style="color:red" %)**Note:**
427 -
428 - **Path**: System ~-~-> Built-in Server
429 -
430 -
431 -**Troubleshooting:**
432 -
433 -
434 -**~ 1. URL does not jump properly**
435 -
436 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
437 -
438 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
439 -
440 -
441 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
442 -
443 -
444 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
445 -
446 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
447 -
448 -
449 449  Login account:
450 450  
451 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
317 +**User ID: ** (% class="mark" %)admin
452 452  
453 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
319 +**Password: ** (% class="mark" %)dragino
454 454  
455 455  
456 456  [[image:image-20220725171719-1.png||height="570" width="769"]]
457 457  
324 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
325 + You can complete the installation manually with the following command.(%%)**
458 458  
459 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
460 460  
461 -
462 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
463 -
464 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
465 -
466 -[[image:image-20230321092456-1.png]]
467 -
468 -
469 -== 4.2 Application Server ~-~- Node-Red ==
470 -
471 -
472 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
473 -
474 -
475 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
476 -
477 -
478 -[[image:image-20220725172124-3.png||height="610" width="843"]]
479 -
480 -
481 -
482 -=== **Using Node-Red, InfluxDB and Grafana** ===
483 -
484 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
485 -
486 -
487 -the users can refer to this link to install them.
488 -
489 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
490 -
491 -
492 -=== **Upgrade the node.js** ===
493 -
494 -By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
495 -
496 -
497 -the users can refer to this link to upgrade them.
498 -
499 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
500 -
501 -
502 -== 4.3 How to disable the built-in server ==
503 -
504 -
505 -Use the following commands to start and stop the TTNv3 service:
506 -
507 507  (% class="box infomessage" %)
508 508  (((
509 -**# start**
510 -systemctl start ttnstack
330 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
511 511  
512 -**# stop**
513 -systemctl stop ttnstack
514 -
515 -**# enable**
516 -systemctl enable ttnstack
517 -
518 -**#disable**
519 -systemctl disable ttnstack
332 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
520 520  )))
521 521  
522 -Use the following commands to start and stop the Node-Red service:
523 523  
524 -(% class="box infomessage" %)
525 -(((
526 -**# start**
527 -systemctl start nodered
336 += **5. Build-in Application Server ~-~- Node-Red** =
528 528  
529 -**# stop**
530 -systemctl stop nodered
531 531  
532 -**# enable**
533 -systemctl enable nodered
339 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
534 534  
535 -**#disable**
536 -systemctl disable nodered
537 -)))
341 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
538 538  
539 539  
540 -== 4.4 How to use ChirpStack on LPS8-V2 ==
344 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
541 541  
346 +[[image:image-20220725172124-3.png||height="610" width="843"]]
542 542  
543 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
544 544  
545 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
546 546  
547 -[[image:image-20230222094908-1.png||height="133" width="798"]]
350 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
351 + You can complete the installation manually with the following command.(%%)**
548 548  
549 549  
550 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
551 -
552 -
553 -
554 -= 6. How users can access LPS8-V2 using serial USB =
555 -
556 -
557 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
558 -
559 -
560 -Port 1 of the UART on the LPS8-V2 is GND
561 -
562 562  (% class="box infomessage" %)
563 563  (((
564 -**TXD  <~-~--> UART RXD (Gray line)**
565 -
566 -**RXD  <~-~--> UART TXD (White line)**
567 -
568 -**GND <~-~--> GND (Black line)**
356 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
357 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
569 569  )))
570 570  
360 +[[image:image-20220728102000-1.png]]
571 571  
572 -**LPS8v2 UART connection photo**
573 573  
574 -[[image:image-20220804163015-1.png||height="621" width="466"]]
363 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
575 575  
576 -
577 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
578 -
579 -
580 -[[image:image-20220804164928-3.png||height="320" width="332"]]
581 -
582 -
583 -[[image:image-20220804164747-2.png||height="622" width="594"]]
584 -
585 -
586 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
587 -
588 -
589 -== **Step 1: Configure Frequency Band** ==
590 -
591 -
592 -//Each country has a requirement for frequency region. Choose the right one for your area.//
593 -
594 -[[image:image-20220905164308-1.png]]
595 -
596 -
597 -
598 -== **Step 2: Configure the forward address** ==
599 -
600 -
601 -**Select one of the servers to configure.**
602 -
603 -**For example:**
604 -
605 -[[image:image-20220905164847-2.png]]
606 -
607 -
608 -
609 -== **Step 3: Download and Install the Helium-gateway-rs** ==
610 -
611 -
612 -**Access the gateway CLI via SSH.**
613 -
614 -[[image:image-20220905165222-3.png]]
615 -
616 -
617 -**Download gateway-rs.**
618 -
619 -[[image:image-20220905165715-5.png]]
620 -
621 -(% class="box infomessage" %)
622 622  (((
623 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
624 -)))
625 -
626 -
627 -**Install gateway-rs.**
628 -
629 -[[image:image-20220905165917-7.png]]
630 -
631 -(% class="box infomessage" %)
632 -(((
633 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
634 -)))
635 -
636 -
637 -**Modify configuration.**
638 -
639 -
640 -[[image:image-20220905173847-12.png]]
641 -
642 -
643 -(% class="box infomessage" %)
644 -(((
645 -**region=<Enter regional parameters> \
646 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
647 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
648 -)))
649 -
650 -
651 -**Restart the helium_gateway**
652 -
653 -[[image:image-20220905170920-9.png]]
654 -
655 -
656 -(% class="box infomessage" %)
657 -(((
658 -**systemctl restart helium_gateway**
659 -)))
660 -
661 -
662 -**Check the helium_gateway Log：**
663 -
664 -[[image:image-20220905173952-13.png]]
665 -
666 -
667 -(% class="box infomessage" %)
668 -(((
669 -**journalctl -u helium_gateway -f**
670 -)))
671 -
672 -
673 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
674 -
675 -where the helium gateway log is shown:
676 -
677 -[[image:image-20220905174534-14.png]]
678 -
679 -
680 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
681 -
682 -
683 -= 8. OTA System Update =
684 -
685 -
686 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
687 -
688 -
689 -= 9. Trouble Shooting =
690 -
691 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
692 -
693 -
694 -[[image:image-20220920135918-1.png]]
695 -
696 -
697 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
698 -
699 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
700 -
701 -
702 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
703 -
704 -**Click the update URL button to configure the URL with the current eth port address.**
705 -
706 -[[image:image-20220920141936-2.png]]
707 -
708 -
709 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
710 -
711 -
712 -(((
713 713  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
714 714  )))
715 715  
... ... @@ -717,42 +717,38 @@
717 717  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
718 718  
719 719  
720 -= 11. Reference =
373 += **11 Reference** =
721 721  
722 -
723 723  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
724 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
725 725  
726 726  
727 727  )))
728 728  
729 -= 12. Order Info =
380 += **12. Order Info** =
730 730  
731 -
732 732  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
733 733  
734 734  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
735 735  
736 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
737 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
738 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
739 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
740 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
741 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
386 +* **AS923**: LoRaWAN AS923 band
387 +* **AU915**: LoRaWAN AU915 band
388 +* **EU868**: LoRaWAN EU868 band
389 +* **KR920**: LoRaWAN KR920 band
390 +* **US915**: LoRaWAN US915 band
391 +* **IN865**: LoRaWAN IN865 band
742 742  
743 743  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
744 744  
745 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
746 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
747 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
748 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
395 +* ** E**: EMEA, Korea, Thailand, India.
396 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
397 +* ** AU**: Latin America, New Zeland, Taiwan
398 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
749 749  
750 750  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
751 751  
752 752  
753 -= 13. Manufacturer Info =
403 += **13. Manufacturer Info** =
754 754  
755 -
756 756  **Shenzhen Dragino Technology Development co. LTD**
757 757  
758 758  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -760,38 +760,21 @@
760 760  LongCheng Street, LongGang District ; Shenzhen 518116,China
761 761  
762 762  
763 -= 14. FCC Warning =
412 += **14. FCC Warning** =
764 764  
765 -
766 -(((
767 767  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
768 -)))
769 769  
770 -(((
771 771  ~-~- Reorient or relocate the receiving antenna.
772 -)))
773 773  
774 -(((
775 775  ~-~- Increase the separation between the equipment and receiver.
776 -)))
777 777  
778 -(((
779 779  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
780 -)))
781 781  
782 -(((
783 783  ~-~- Consult the dealer or an experienced radio/TV technician for help.
784 -)))
785 785  
786 786  
787 -(((
788 788  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
789 -)))
790 790  
791 791  
792 -(((
793 793  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
794 -
795 -
796 796  )))
797 -)))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0