Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 160.1 >
edited by Kilight Cao
on 2023/03/31 14:57
To version < 69.1 >
edited by Xiaoye
on 2022/07/28 10:20
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 LoRaWAN Indoor Gateway
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -1,9 +2,8 @@
1 -(% style="text-align:center" %)
2 2  [[image:image-20220620202334-2.png||height="467" width="809"]]
3 3  
4 4  
5 5  (((
6 -
5 +**LPS8v2 User Manual**
7 7  
8 8  
9 9  )))
... ... @@ -12,64 +12,44 @@
12 12  
13 13  {{toc/}}
14 14  
14 += **1. Introduction** =
15 15  
16 +== **1.1 What is LPS8v2** ==
16 16  
17 -
18 -
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
28 28  
29 -(((
30 30  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 34  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 42  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
44 44  
45 45  
46 -== 1.2 Specifications ==
30 +== **1.2 Specifications** ==
47 47  
32 +**Hardware System:**
48 48  
49 -(% style="color:#037691" %)**Hardware System:**
50 -
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
55 -(% style="color:#037691" %)**Interface:**
38 +**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 -(% style="color:#037691" %)**Operating Condition:**
44 +**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
46 +* Work Temperature: -20 ~~ 65°C
47 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
50 +== **1.3 Features** ==
69 69  
70 -== 1.3 Features ==
71 -
72 -
73 73  * Open Source Debian system
74 74  * Managed by Web GUI, SSH via WAN or WiFi
75 75  * Remote Management
... ... @@ -82,170 +82,117 @@
82 82  ** Semtech UDP Packet Forwarder
83 83  ** LoRaWAN Basic Station
84 84  ** ChirpStack-Gateway-Bridge (MQTT)
85 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
86 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
64 +* Built-in //**The Things Network**// local LoRaWAN server
65 +* Built-in  //**Node-Red**// local Application server
87 87  
67 +== **1.4 Block Diagram** ==
88 88  
89 -== 1.4 Block Diagram ==
90 90  
70 +== **1.5 LED Indicators** ==
91 91  
92 -
93 -== 1.5 LED Indicators ==
94 -
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
75 +//**➢ Power LED**: This RED LED will be solid if the device is properly powered//
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
78 +//**➢ LoRa LED**: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
81 +//**➢ SYS LED**: This RGB LED will show different colors in different states~://
108 108  
109 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
83 +// ✓ SOLID BLUE: The device is alive with a LoRaWAN server connection.//
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85 +// ✓ BLINKING BLUE: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
112 112  
87 +// ✓ SOLID RED: Device doesn’t have an Internet connection.//
113 113  
114 -== 1.6 Button Intruction ==
115 115  
90 +//**➢ ETH LED**: This LED shows the ETH interface connection status.//
116 116  
117 -LPS8-V2 has a black toggle button, which is:
118 118  
93 += **2. Quick Start** =
119 119  
120 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 -
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 -
124 -
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 -
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 -
129 -
130 -= 2. Quick Start =
131 -
132 -
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
100 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 -== 2.1.1 connect the network ==
141 141  
103 +== **2.1.1 connect the network.** ==
142 142  
143 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
105 +=== ===
144 144  
107 +=== **Method 1**: Connect via Ethernet with DHCP IP from the router ===
145 145  
146 -(((
147 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 -)))
109 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
149 149  
150 -(((
151 151  You can also use this IP to connect.
152 -)))
153 153  
154 154  [[image:image-20220622100129-1.png||height="332" width="1263"]]
155 155  
156 156  
157 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
116 +=== **Method 2**: Connect via WiFi with DHCP IP from the router ===
158 158  
159 159  
160 -[[image:image-20230107084650-2.png||height="310" width="839"]]
119 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
161 161  
162 162  
163 -(% style="color:blue" %)**Steps to connect via fallback IP:**
122 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
164 164  
165 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
166 166  
167 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
125 +**Steps to connect via fallback IP:**
168 168  
169 -As in the below photo:
127 +~1. Connect PC’s Ethernet port to LPS8-V2's WAN port
170 170  
171 -[[image:image-20230107085904-4.png||height="443" width="361"]]
129 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
172 172  
173 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
131 +[[image:image-20220622101433-4.png]]
174 174  
175 175  
176 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
134 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
177 177  
178 178  
137 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
179 179  
180 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
181 181  
140 +Fill in the WiFi information by checking the box and clicking **Save&Apply**
182 182  
183 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
184 184  
185 -
186 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
187 -
188 -
189 189  [[image:image-20220622102702-6.png]]
190 190  
191 191  
192 -
193 193  **Wi-Fi configuration successful**
194 194  
195 195  
196 196  [[image:image-20220622102847-7.png]]
197 197  
151 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
198 198  
199 -[[image:image-20220622102901-8.png||height="476" width="938"]]
200 200  
201 201  
202 -== 2.1.2 Access Configure Web UI ==
203 203  
156 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
204 204  
205 -**Web Interface**
206 206  
207 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
159 +=== **2.2.1 Select your area frequency** ===
208 208  
209 -
210 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
211 -
212 -You will see the login interface of LPS8-V2 as shown below.
213 -
214 -The account details for Web Login are:
215 -
216 -(% style="color:#4f81bd" %)**User Name: root**
217 -
218 -(% style="color:#4f81bd" %)**Password:   dragino**
219 -
220 -[[image:image-20230106153501-1.png||height="367" width="894"]]
221 -
222 -
223 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
224 -
225 -=== 2.2.1 Select your area frequency ===
226 -
227 -
228 -(((
229 229  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
230 230  
231 -
232 -)))
163 +[[image:image-20220622103332-9.png]]
233 233  
234 -[[image:image-20220622103332-9.png||height="485" width="938"]]
235 235  
166 +=== **2.2.2 Get the only gateway EUI** ===
236 236  
237 -=== 2.2.2 Get the only gateway EUI ===
238 -
239 -
240 240  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
241 241  
170 +[[image:image-20220622103355-10.png]]
242 242  
243 -[[image:image-20220622103355-10.png||height="698" width="949"]]
244 244  
173 +**Note: Choose the cluster that corresponds to a specific Gateway server address**
245 245  
246 -(% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
247 -
248 -
249 249  **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
250 250  
251 251  **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
... ... @@ -258,14 +258,13 @@
258 258  [[image:image-20220622103956-12.png]]
259 259  
260 260  
261 -=== 2.2.3 Register the gateway to The Things Network ===
262 262  
188 +== 2.2.3 Register the gateway to The Things Network ==
263 263  
264 264  **Login to The Things Network**
265 265  
266 266  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
267 267  
268 -
269 269  **Add the gateway**
270 270  
271 271  [[image:image-20220622104252-13.png||height="511" width="953"]]
... ... @@ -274,434 +274,159 @@
274 274  **Get it online**
275 275  
276 276  
277 -= 3. Web Configure Pages =
202 += **3. Web Configure Pages** =
278 278  
279 -== 3.1 Home ==
280 280  
205 +== **3.1 Home** ==
281 281  
282 282  //Shows the system running status~://
283 283  
284 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
209 +== **3.2 LoRa Settings** ==
285 285  
286 286  
287 -== 3.2 LoRa Settings ==
212 +=== **3.2.1 LoRa ~-~-> LoRa** ===
288 288  
289 -=== 3.2.1 LoRa ~-~-> LoRa ===
290 290  
291 -
292 292  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
293 293  
294 294  //Different LPS8v2 hardware versions can support different frequency ranges~://
295 295  
296 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
219 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
297 297  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
298 298  
299 299  (% class="wikigeneratedid" %)
300 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
223 +//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page **LogRead ~-~-> LoRa Log**//
301 301  
302 -
303 303  (% class="wikigeneratedid" %)
304 304  [[image:image-20220616110739-1.png||height="372" width="682"]]
305 305  
306 306  
307 -(((
308 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
309 -)))
229 +//**Note ***: See this instruction for how to customize the frequency band~://
310 310  
231 +//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
311 311  
312 -== 3.3 LoRaWAN Settings ==
313 313  
314 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
234 +== **3.3 LoRaWAN Settings** ==
315 315  
316 316  
317 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
237 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
318 318  
319 319  
240 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
241 +
320 320  [[image:image-20220616111932-2.png||height="516" width="672"]]
321 321  
322 322  
323 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
245 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
324 324  
325 325  
326 326  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
327 327  
328 -
329 329  [[image:image-20220616113246-3.png||height="396" width="672"]]
330 330  
331 331  
332 -(((
333 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
334 -)))
253 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
335 335  
336 336  
337 -== 3.4 Network Settings ==
256 +== **3.4 Network Settings** ==
338 338  
339 -=== 3.4.1 Network ~-~-> WiFi ===
340 340  
259 +=== **3.4.1 Network ~-~-> WiFi** ===
341 341  
261 +
342 342  [[image:image-20220616114756-4.png||height="251" width="669"]]
343 343  
344 344  
345 -=== 3.4.2 Network ~-~-> System Status ===
265 +=== **3.4.2 Network ~-~-> System Status** ===
346 346  
347 347  
348 -[[image:image-20220820134112-2.png||height="539" width="668"]]
268 +[[image:image-20220616115229-5.png||height="548" width="665"]]
349 349  
350 350  
351 -=== 3.4.3 Network ~-~-> Network ===
271 +=== **3.4.3 Network ~-~-> Firewall** ===
352 352  
353 353  
354 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
274 +[[image:image-20220616115351-6.png||height="244" width="661"]]
355 355  
356 -[[image:image-20230214093657-2.png||height="333" width="858"]]
357 357  
277 +== **3.5 System** ==
358 358  
359 -=== 3.4.4 Network ~-~-> Cellular ===
360 360  
280 +=== **3.5.1  System ~-~-> System Overview** ===
361 361  
362 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
363 363  
364 -(% style="color:red" %)**Note: APN cannot be empty.**
365 -
366 -[[image:image-20230228115126-1.png]]
367 -
368 -
369 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
370 -
371 -[[image:image-20230228115535-2.png||height="478" width="888"]]
372 -
373 -
374 -== 3.5 System ==
375 -
376 -=== 3.5.1 System ~-~-> System Overview ===
377 -
378 -
379 379  Shows the system info:
380 380  
381 -[[image:image-20220917144512-5.png||height="618" width="853"]]
382 382  
286 +=== **3.5.2 System ~-~-> Backup/Restore** ===
383 383  
384 -=== 3.5.2 System ~-~-> System General ===
385 385  
289 +[[image:image-20220616115808-7.png||height="194" width="649"]]
386 386  
387 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
388 388  
389 -In addition, Users can customize the FallBack IP address.
390 390  
391 -[[image:image-20230214094058-3.png]]
293 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
392 392  
393 393  
394 -=== 3.5.3 System ~-~-> Backup/Restore ===
296 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
395 395  
298 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
396 396  
397 -[[image:image-20220917144725-6.png||height="208" width="869"]]
398 398  
301 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
399 399  
400 -=== 3.5.4 System ~-~-> Remoteit ===
401 401  
402 -
403 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
404 -
405 -
406 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
407 -
408 -[[image:image-20221230092303-2.png]]
409 -
410 -
411 -=== 3.5.5 System ~-~-> Package Management ===
412 -
413 -
414 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
415 -
416 -[[image:image-20230214094316-4.png]]
417 -
418 -
419 -= 4. Build-in Server =
420 -
421 -
422 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
423 -
424 -
425 -[[image:image-20230214095318-5.png||height="347" width="980"]]
426 -
427 -
428 -(% style="color:red" %)**Note:**
429 -
430 - **Path**: System ~-~-> Built-in Server
431 -
432 -
433 -**Troubleshooting:**
434 -
435 -
436 -**~ 1. URL does not jump properly**
437 -
438 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
439 -
440 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
441 -
442 -
443 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
444 -
445 -
446 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
447 -
448 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
449 -
450 -
451 451  Login account:
452 452  
453 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
306 +**User ID: ** (% class="mark" %)admin
454 454  
455 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
308 +**Password: ** (% class="mark" %)dragino
456 456  
457 457  
458 458  [[image:image-20220725171719-1.png||height="570" width="769"]]
459 459  
313 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
314 + You can complete the installation manually with the following command.(%%)**
460 460  
461 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
462 462  
463 -
464 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
465 -
466 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
467 -
468 -[[image:image-20230321092456-1.png]]
469 -
470 -
471 -== 4.2 Application Server ~-~- Node-Red ==
472 -
473 -
474 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
475 -
476 -
477 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
478 -
479 -
480 -[[image:image-20220725172124-3.png||height="610" width="843"]]
481 -
482 -
483 -
484 -=== **Using Node-Red, InfluxDB and Grafana** ===
485 -
486 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
487 -
488 -
489 -the users can refer to this link to install them.
490 -
491 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
492 -
493 -
494 -== 4.3 How to disable the built-in server ==
495 -
496 -
497 -Use the following commands to start and stop the TTNv3 service:
498 -
499 499  (% class="box infomessage" %)
500 500  (((
501 -**# start**
502 -systemctl start ttnstack
319 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
503 503  
504 -**# stop**
505 -systemctl stop ttnstack
506 -
507 -**# enable**
508 -systemctl enable ttnstack
509 -
510 -**#disable**
511 -systemctl disable ttnstack
321 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
512 512  )))
513 513  
514 -Use the following commands to start and stop the Node-Red service:
515 515  
516 -(% class="box infomessage" %)
517 -(((
518 -**# start**
519 -systemctl start nodered
325 += **5. Build-in Application Server ~-~- Node-Red** =
520 520  
521 -**# stop**
522 -systemctl stop nodered
523 523  
524 -**# enable**
525 -systemctl enable nodered
328 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
526 526  
527 -**#disable**
528 -systemctl disable nodered
529 -)))
330 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
530 530  
531 531  
532 -== 4.4 How to use ChirpStack on LPS8-V2 ==
333 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
533 533  
335 +[[image:image-20220725172124-3.png||height="610" width="843"]]
534 534  
535 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
536 536  
537 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
538 538  
539 -[[image:image-20230222094908-1.png||height="133" width="798"]]
339 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
340 + You can complete the installation manually with the following command.(%%)**
540 540  
541 541  
542 -= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
543 -
544 -
545 -
546 -= 6. How users can access LPS8-V2 using serial USB =
547 -
548 -
549 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
550 -
551 -
552 -Port 1 of the UART on the LPS8-V2 is GND
553 -
554 554  (% class="box infomessage" %)
555 555  (((
556 -**TXD  <~-~--> UART RXD (Gray line)**
557 -
558 -**RXD  <~-~--> UART TXD (White line)**
559 -
560 -**GND <~-~--> GND (Black line)**
345 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
346 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
561 561  )))
562 562  
349 +[[image:image-20220728102000-1.png]]
563 563  
564 -**LPS8v2 UART connection photo**
565 565  
566 -[[image:image-20220804163015-1.png||height="621" width="466"]]
352 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
567 567  
568 -
569 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
570 -
571 -
572 -[[image:image-20220804164928-3.png||height="320" width="332"]]
573 -
574 -
575 -[[image:image-20220804164747-2.png||height="622" width="594"]]
576 -
577 -
578 -= 7. Use the helium gateway-rs as the Data-only Hotspot =
579 -
580 -
581 -== **Step 1: Configure Frequency Band** ==
582 -
583 -
584 -//Each country has a requirement for frequency region. Choose the right one for your area.//
585 -
586 -[[image:image-20220905164308-1.png]]
587 -
588 -
589 -
590 -== **Step 2: Configure the forward address** ==
591 -
592 -
593 -**Select one of the servers to configure.**
594 -
595 -**For example:**
596 -
597 -[[image:image-20220905164847-2.png]]
598 -
599 -
600 -
601 -== **Step 3: Download and Install the Helium-gateway-rs** ==
602 -
603 -
604 -**Access the gateway CLI via SSH.**
605 -
606 -[[image:image-20220905165222-3.png]]
607 -
608 -
609 -**Download gateway-rs.**
610 -
611 -[[image:image-20220905165715-5.png]]
612 -
613 -(% class="box infomessage" %)
614 614  (((
615 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
616 -)))
617 -
618 -
619 -**Install gateway-rs.**
620 -
621 -[[image:image-20220905165917-7.png]]
622 -
623 -(% class="box infomessage" %)
624 -(((
625 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
626 -)))
627 -
628 -
629 -**Modify configuration.**
630 -
631 -
632 -[[image:image-20220905173847-12.png]]
633 -
634 -
635 -(% class="box infomessage" %)
636 -(((
637 -**region=<Enter regional parameters> \
638 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
639 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
640 -)))
641 -
642 -
643 -**Restart the helium_gateway**
644 -
645 -[[image:image-20220905170920-9.png]]
646 -
647 -
648 -(% class="box infomessage" %)
649 -(((
650 -**systemctl restart helium_gateway**
651 -)))
652 -
653 -
654 -**Check the helium_gateway Log：**
655 -
656 -[[image:image-20220905173952-13.png]]
657 -
658 -
659 -(% class="box infomessage" %)
660 -(((
661 -**journalctl -u helium_gateway -f**
662 -)))
663 -
664 -
665 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
666 -
667 -where the helium gateway log is shown:
668 -
669 -[[image:image-20220905174534-14.png]]
670 -
671 -
672 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
673 -
674 -
675 -= 8. OTA System Update =
676 -
677 -
678 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
679 -
680 -
681 -= 9. Trouble Shooting =
682 -
683 -== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
684 -
685 -
686 -[[image:image-20220920135918-1.png]]
687 -
688 -
689 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
690 -
691 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
692 -
693 -
694 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
695 -
696 -**Click the update URL button to configure the URL with the current eth port address.**
697 -
698 -[[image:image-20220920141936-2.png]]
699 -
700 -
701 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
702 -
703 -
704 -(((
705 705  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
706 706  )))
707 707  
... ... @@ -709,42 +709,38 @@
709 709  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
710 710  
711 711  
712 -= 11. Reference =
362 += **11 Reference** =
713 713  
714 -
715 715  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
716 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
717 717  
718 718  
719 719  )))
720 720  
721 -= 12. Order Info =
369 += **12. Order Info** =
722 722  
723 -
724 724  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
725 725  
726 726  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
727 727  
728 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
729 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
730 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
731 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
732 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
733 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
375 +* **AS923**: LoRaWAN AS923 band
376 +* **AU915**: LoRaWAN AU915 band
377 +* **EU868**: LoRaWAN EU868 band
378 +* **KR920**: LoRaWAN KR920 band
379 +* **US915**: LoRaWAN US915 band
380 +* **IN865**: LoRaWAN IN865 band
734 734  
735 735  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
736 736  
737 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
738 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
739 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
740 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
384 +* ** E**: EMEA, Korea, Thailand, India.
385 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
386 +* ** AU**: Latin America, New Zeland, Taiwan
387 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
741 741  
742 742  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
743 743  
744 744  
745 -= 13. Manufacturer Info =
392 += **13. Manufacturer Info** =
746 746  
747 -
748 748  **Shenzhen Dragino Technology Development co. LTD**
749 749  
750 750  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -752,38 +752,21 @@
752 752  LongCheng Street, LongGang District ; Shenzhen 518116,China
753 753  
754 754  
755 -= 14. FCC Warning =
401 += **14. FCC Warning** =
756 756  
757 -
758 -(((
759 759  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
760 -)))
761 761  
762 -(((
763 763  ~-~- Reorient or relocate the receiving antenna.
764 -)))
765 765  
766 -(((
767 767  ~-~- Increase the separation between the equipment and receiver.
768 -)))
769 769  
770 -(((
771 771  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
772 -)))
773 773  
774 -(((
775 775  ~-~- Consult the dealer or an experienced radio/TV technician for help.
776 -)))
777 777  
778 778  
779 -(((
780 780  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
781 -)))
782 782  
783 783  
784 -(((
785 785  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
786 -
787 -
788 788  )))
789 -)))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0