Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 159.2 >
edited by Xiaoling
on 2023/03/22 17:06
To version < 80.1 >
edited by Edwin Chen
on 2022/08/15 10:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -57,20 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 -* Sensitivity: -140dBm
61 -* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 70°C
66 -* Storage Temperature: -20 ~~ 70°C
61 +* Work Temperature: -20 ~~ 65°C
62 +* Storage Temperature: -20 ~~ 65°C
67 67  * Power Input: 5V, 2A, DC
68 68  
65 +== **1.3 Features** ==
69 69  
70 70  
71 -== 1.3 Features ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 76  * Remote Management
... ... @@ -86,67 +86,52 @@
86 86  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 87  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
88 88  
83 +== **1.4 Block Diagram** ==
89 89  
90 90  
91 -== 1.4 Block Diagram ==
92 92  
87 +== **1.5 LED Indicators** ==
93 93  
94 94  
95 -== 1.5 LED Indicators ==
96 -
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 101  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
102 102  
103 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
106 106  
107 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
108 108  
109 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
111 111  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
112 112  
113 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
114 114  
115 115  
116 -== 1.6 Button Intruction ==
117 117  
109 += **2. Quick Start** =
118 118  
119 -LPS8-V2 has a black toggle button, which is:
120 120  
121 -
122 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 -
124 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125 -
126 -
127 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128 -
129 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130 -
131 -
132 -= 2. Quick Start =
133 -
134 -
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
140 -== 2.1 Connects to the network and accesses the gateway Web UI ==
141 141  
142 -== 2.1.1 connect the network ==
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
143 143  
144 144  
121 +== **2.1.1 connect the network.** ==
122 +
123 +
145 145  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
146 146  
147 147  
148 148  (((
149 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
150 150  )))
151 151  
152 152  (((
... ... @@ -156,35 +156,34 @@
156 156  [[image:image-20220622100129-1.png||height="332" width="1263"]]
157 157  
158 158  
159 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
160 160  
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
161 161  
162 -[[image:image-20230107084650-2.png||height="310" width="839"]]
163 163  
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
164 164  
165 -(% style="color:blue" %)**Steps to connect via fallback IP:**
166 166  
167 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
168 168  
169 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
170 170  
171 -As in the below photo:
172 172  
173 -[[image:image-20230107085904-4.png||height="443" width="361"]]
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
174 174  
175 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
176 176  
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
177 177  
178 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
157 +[[image:image-20220622101433-4.png]]
179 179  
180 180  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
181 181  
182 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
183 183  
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
184 184  
185 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
186 186  
187 -
188 188  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
189 189  
190 190  
... ... @@ -198,53 +198,32 @@
198 198  [[image:image-20220622102847-7.png]]
199 199  
200 200  
201 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
202 202  
203 203  
204 -== 2.1.2 Access Configure Web UI ==
205 205  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
206 206  
207 -**Web Interface**
208 208  
209 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
210 210  
211 211  
212 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
213 -
214 -You will see the login interface of LPS8-V2 as shown below.
215 -
216 -The account details for Web Login are:
217 -
218 -(% style="color:#4f81bd" %)**User Name: root**
219 -
220 -(% style="color:#4f81bd" %)**Password:   dragino**
221 -
222 -[[image:image-20230106153501-1.png||height="367" width="894"]]
223 -
224 -
225 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
226 -
227 -=== 2.2.1 Select your area frequency ===
228 -
229 -
230 230  (((
231 231  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
232 -
233 -
234 234  )))
235 235  
236 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
237 237  
238 238  
239 -=== 2.2.2 Get the only gateway EUI ===
240 240  
197 +=== **2.2.2 Get the only gateway EUI** ===
241 241  
199 +
242 242  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
243 243  
202 +[[image:image-20220622103355-10.png]]
244 244  
245 -[[image:image-20220622103355-10.png||height="698" width="949"]]
246 246  
247 -
248 248  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
249 249  
250 250  
... ... @@ -260,9 +260,10 @@
260 260  [[image:image-20220622103956-12.png]]
261 261  
262 262  
263 -=== 2.2.3 Register the gateway to The Things Network ===
264 264  
221 +== 2.2.3 Register the gateway to The Things Network ==
265 265  
223 +
266 266  **Login to The Things Network**
267 267  
268 268  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -276,19 +276,20 @@
276 276  **Get it online**
277 277  
278 278  
279 -= 3. Web Configure Pages =
280 280  
281 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
282 282  
283 283  
241 +== **3.1 Home** ==
242 +
243 +
284 284  //Shows the system running status~://
285 285  
286 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
287 287  
247 +== **3.2 LoRa Settings** ==
288 288  
289 -== 3.2 LoRa Settings ==
290 290  
291 -=== 3.2.1 LoRa ~-~-> LoRa ===
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
292 292  
293 293  
294 294  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -295,158 +295,97 @@
295 295  
296 296  //Different LPS8v2 hardware versions can support different frequency ranges~://
297 297  
298 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
299 299  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
300 300  
301 301  (% class="wikigeneratedid" %)
302 302  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
303 303  
304 -
305 305  (% class="wikigeneratedid" %)
306 306  [[image:image-20220616110739-1.png||height="372" width="682"]]
307 307  
308 308  
309 309  (((
310 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
311 311  )))
312 312  
313 313  
314 -== 3.3 LoRaWAN Settings ==
315 315  
316 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
317 317  
318 318  
319 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
320 320  
321 321  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
322 322  [[image:image-20220616111932-2.png||height="516" width="672"]]
323 323  
324 324  
325 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
326 326  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
327 327  
287 +
328 328  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
329 329  
330 -
331 331  [[image:image-20220616113246-3.png||height="396" width="672"]]
332 332  
333 333  
334 334  (((
335 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
336 336  )))
337 337  
338 338  
339 -== 3.4 Network Settings ==
340 340  
341 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
342 342  
343 343  
344 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
345 345  
346 346  
347 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
348 348  
349 349  
350 -[[image:image-20220820134112-2.png||height="539" width="668"]]
351 351  
309 +=== **3.4.2 Network ~-~-> System Status** ===
352 352  
353 -=== 3.4.3 Network ~-~-> Network ===
354 354  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
355 355  
356 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
357 357  
358 -[[image:image-20230214093657-2.png||height="333" width="858"]]
359 359  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
360 360  
361 -=== 3.4.4 Network ~-~-> Cellular ===
362 362  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
363 363  
364 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
365 365  
366 -(% style="color:red" %)**Note: APN cannot be empty.**
367 367  
368 -[[image:image-20230228115126-1.png]]
323 +== **3.5 System** ==
369 369  
370 370  
371 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
326 +=== **3.5.1  System ~-~-> System Overview** ===
372 372  
373 -[[image:image-20230228115535-2.png||height="478" width="888"]]
374 374  
375 -
376 -== 3.5 System ==
377 -
378 -=== 3.5.1 System ~-~-> System Overview ===
379 -
380 -
381 381  Shows the system info:
382 382  
383 -[[image:image-20220917144512-5.png||height="618" width="853"]]
384 384  
385 385  
386 -=== 3.5.2 System ~-~-> System General ===
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
387 387  
388 388  
389 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
390 390  
391 -In addition, Users can customize the FallBack IP address.
392 392  
393 -[[image:image-20230214094058-3.png]]
394 394  
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
395 395  
396 -=== 3.5.3 System ~-~-> Backup/Restore ===
397 397  
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
398 398  
399 -[[image:image-20220917144725-6.png||height="208" width="869"]]
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
400 400  
401 401  
402 -=== 3.5.4 System ~-~-> Remoteit ===
403 -
404 -
405 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
406 -
407 -
408 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
409 -
410 -[[image:image-20221230092303-2.png]]
411 -
412 -
413 -=== 3.5.5 System ~-~-> Package Management ===
414 -
415 -
416 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
417 -
418 -[[image:image-20230214094316-4.png]]
419 -
420 -
421 -= 4. Build-in Server =
422 -
423 -
424 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
425 -
426 -
427 -[[image:image-20230214095318-5.png||height="347" width="980"]]
428 -
429 -
430 -(% style="color:red" %)**Note:**
431 -
432 - **Path**: System ~-~-> Built-in Server
433 -
434 -
435 -**Troubleshooting:**
436 -
437 -
438 -**~ 1. URL does not jump properly**
439 -
440 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
441 -
442 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
443 -
444 -
445 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
446 -
447 -
448 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
449 -
450 450  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
451 451  
452 452  
... ... @@ -460,245 +460,86 @@
460 460  [[image:image-20220725171719-1.png||height="570" width="769"]]
461 461  
462 462  
463 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
464 -
465 -
466 -Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
467 -
468 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
469 -
470 -[[image:image-20230321092456-1.png]]
471 -
472 -
473 -== 4.2 Application Server ~-~- Node-Red ==
474 -
475 -
476 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
477 -
478 -
479 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
480 -
481 -
482 -[[image:image-20220725172124-3.png||height="610" width="843"]]
483 -
484 -
485 -
486 -=== **Using Node-Red, InfluxDB and Grafana** ===
487 -
488 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
489 -
490 -
491 -the users can refer to this link to install them.
492 -
493 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
494 -
495 -
496 -== 4.3 How to disable the built-in server ==
497 -
498 -
499 -Use the following commands to start and stop the TTNv3 service:
500 -
501 -(% class="box infomessage" %)
502 502  (((
503 -**# start**
504 -systemctl start ttnstack
505 -
506 -**# stop**
507 -systemctl stop ttnstack
508 -
509 -**# enable**
510 -systemctl enable ttnstack
511 -
512 -**#disable**
513 -systemctl disable ttnstack
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
514 514  )))
515 515  
516 -Use the following commands to start and stop the Node-Red service:
517 517  
518 518  (% class="box infomessage" %)
519 519  (((
520 -**# start**
521 -systemctl start nodered
522 -
523 -**# stop**
524 -systemctl stop nodered
525 -
526 -**# enable**
527 -systemctl enable nodered
528 -
529 -**#disable**
530 -systemctl disable nodered
531 -)))
532 -
533 -
534 -== 4.4 How to use ChirpStack on LPS8-V2 ==
535 -
536 -
537 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
538 -
539 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
540 -
541 -[[image:image-20230222094908-1.png||height="133" width="798"]]
542 -
543 -
544 -= 5. How users can access LPS8-V2 using serial USB =
545 -
546 -
547 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
548 -
549 -
550 -Port 1 of the UART on the LPS8-V2 is GND
551 -
552 -(% class="box infomessage" %)
553 553  (((
554 -**TXD  <~-~--> UART RXD (Gray line)**
555 -
556 -**RXD  <~-~--> UART TXD (White line)**
557 -
558 -**GND <~-~--> GND (Black line)**
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
559 559  )))
373 +)))
560 560  
561 561  
562 -**LPS8v2 UART connection photo**
563 563  
564 -[[image:image-20220804163015-1.png||height="621" width="466"]]
377 += **5. Build-in Application Server ~-~- Node-Red** =
565 565  
566 566  
567 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
568 568  
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
569 569  
570 -[[image:image-20220804164928-3.png||height="320" width="332"]]
571 571  
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
572 572  
573 -[[image:image-20220804164747-2.png||height="622" width="594"]]
574 574  
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
575 575  
576 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
577 577  
578 -
579 -== **Step 1: Configure Frequency Band** ==
580 -
581 -
582 -//Each country has a requirement for frequency region. Choose the right one for your area.//
583 -
584 -[[image:image-20220905164308-1.png]]
585 -
586 -
587 -
588 -== **Step 2: Configure the forward address** ==
589 -
590 -
591 -**Select one of the servers to configure.**
592 -
593 -**For example:**
594 -
595 -[[image:image-20220905164847-2.png]]
596 -
597 -
598 -
599 -== **Step 3: Download and Install the Helium-gateway-rs** ==
600 -
601 -
602 -**Access the gateway CLI via SSH.**
603 -
604 -[[image:image-20220905165222-3.png]]
605 -
606 -
607 -**Download gateway-rs.**
608 -
609 -[[image:image-20220905165715-5.png]]
610 -
611 -(% class="box infomessage" %)
612 612  (((
613 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
614 614  )))
615 615  
616 616  
617 -**Install gateway-rs.**
618 618  
619 -[[image:image-20220905165917-7.png]]
620 -
621 621  (% class="box infomessage" %)
622 622  (((
623 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
400 +(((
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
624 624  )))
404 +)))
625 625  
406 +[[image:image-20220728102000-1.png]]
626 626  
627 -**Modify configuration.**
628 628  
409 += **6. How users can access LPS8v2 using serial USB** =
629 629  
630 -[[image:image-20220905173847-12.png]]
631 631  
412 +**USB TTL to LPS8v2  Connection:**
632 632  
633 -(% class="box infomessage" %)
634 -(((
635 -**region=<Enter regional parameters> \
636 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
637 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
638 -)))
414 +Port 1 of the UART on the LPS8v2 is GND
639 639  
640 -
641 -**Restart the helium_gateway**
642 -
643 -[[image:image-20220905170920-9.png]]
644 -
645 -
646 646  (% class="box infomessage" %)
647 647  (((
648 -**systemctl restart helium_gateway**
649 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
650 650  
420 +RXD  <~-~--> UART TXD (White line)
651 651  
652 -**Check the helium_gateway Log：**
653 -
654 -[[image:image-20220905173952-13.png]]
655 -
656 -
657 -(% class="box infomessage" %)
658 -(((
659 -**journalctl -u helium_gateway -f**
422 +GND <~-~--> GND (Black line)
660 660  )))
661 661  
662 662  
663 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
426 +**LPS8v2 UART connection photo**
664 664  
665 -where the helium gateway log is shown:
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
666 666  
667 -[[image:image-20220905174534-14.png]]
668 668  
669 669  
670 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
671 671  
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
672 672  
673 -= 7. OTA System Update =
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
674 674  
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
675 675  
676 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
677 677  
678 -
679 -= 8. Trouble Shooting =
680 -
681 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
682 -
683 -
684 -[[image:image-20220920135918-1.png]]
685 -
686 -
687 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
688 -
689 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
690 -
691 -
692 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
693 -
694 -**Click the update URL button to configure the URL with the current eth port address.**
695 -
696 -[[image:image-20220920141936-2.png]]
697 -
698 -
699 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
700 -
701 -
702 702  (((
703 703  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
704 704  )))
... ... @@ -707,17 +707,17 @@
707 707  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
708 708  
709 709  
710 -= 10. Reference =
711 711  
450 += **11 Reference** =
712 712  
452 +
713 713  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
714 714  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
715 715  
716 -
717 717  
718 718  )))
719 719  
720 -= 11. Order Info =
459 += **12. Order Info** =
721 721  
722 722  
723 723  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -741,9 +741,10 @@
741 741  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
742 742  
743 743  
744 -= 12. Manufacturer Info =
745 745  
484 += **13. Manufacturer Info** =
746 746  
486 +
747 747  **Shenzhen Dragino Technology Development co. LTD**
748 748  
749 749  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -751,9 +751,10 @@
751 751  LongCheng Street, LongGang District ; Shenzhen 518116,China
752 752  
753 753  
754 -= 13. FCC Warning =
755 755  
495 += **14. FCC Warning** =
756 756  
497 +
757 757  (((
758 758  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
759 759  )))
... ... @@ -782,7 +782,5 @@
782 782  
783 783  (((
784 784  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
785 -
786 -
787 787  )))
788 788  )))
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -63.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0