Last modified by Xiaoye on 2024/09/21 08:44
<
From version < 159.1 >
edited by Kilight Cao
on 2023/03/21 09:40
To version < 203.1 >
edited by Kilight Cao
on 2023/05/27 08:54
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -135,12 +135,25 @@
135 135  
136 136  == 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -== 2.1.1 connect the network ==
138 +=== 2.1.1 connect the network ===
139 139  
140 140  
141 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
142 142  
143 143  
144 +Since software version 230524,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +
146 + (% style="background-color:yellow" %)**dragino+dragino**
147 +
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
155 +
156 +
144 144  (((
145 145  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 146  )))
... ... @@ -152,9 +152,10 @@
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
154 154  
155 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
156 156  
169 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
157 157  
171 +
158 158  [[image:image-20230107084650-2.png||height="310" width="839"]]
159 159  
160 160  
... ... @@ -164,20 +164,28 @@
164 164  
165 165  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
166 166  
181 +
182 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
183 +
184 +
167 167  As in the below photo:
168 168  
169 -[[image:image-20230107085904-4.png||height="443" width="361"]]
187 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
170 170  
171 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
172 172  
190 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
173 173  
174 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
192 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
175 175  
176 176  
195 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
177 177  
178 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
197 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
179 179  
180 180  
200 +
201 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
202 +
181 181  [[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 183  
... ... @@ -197,7 +197,7 @@
197 197  [[image:image-20220622102901-8.png||height="476" width="938"]]
198 198  
199 199  
200 -== 2.1.2 Access Configure Web UI ==
222 +=== 2.1.2 Access Configure Web UI ===
201 201  
202 202  
203 203  **Web Interface**
... ... @@ -218,11 +218,80 @@
218 218  [[image:image-20230106153501-1.png||height="367" width="894"]]
219 219  
220 220  
221 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
243 +== 2.2  Typical Network Setup ==
222 222  
223 -=== 2.2.1 Select your area frequency ===
245 +=== 2.2.1  Overview ===
224 224  
225 225  
248 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
249 +
250 +* **WAN Port Internet Mode**
251 +* **WiFi Client Mode**
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +In the **home** page, we can check the Internet connection.
304 +
305 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
306 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
307 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
308 +
309 +[[image:image-20230411101534-3.png||height="544" width="942"]]
310 +
311 +
312 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
313 +
314 +=== 2.3.1 Select your area frequency ===
315 +
316 +
226 226  (((
227 227  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
228 228  
... ... @@ -232,7 +232,7 @@
232 232  [[image:image-20220622103332-9.png||height="485" width="938"]]
233 233  
234 234  
235 -=== 2.2.2 Get the only gateway EUI ===
326 +=== 2.3.2 Get the only gateway EUI ===
236 236  
237 237  
238 238  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -256,7 +256,7 @@
256 256  [[image:image-20220622103956-12.png]]
257 257  
258 258  
259 -=== 2.2.3 Register the gateway to The Things Network ===
350 +=== 2.3.3 Register the gateway to The Things Network ===
260 260  
261 261  
262 262  **Login to The Things Network**
... ... @@ -461,7 +461,7 @@
461 461  
462 462  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
463 463  
464 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
555 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
465 465  
466 466  [[image:image-20230321092456-1.png]]
467 467  
... ... @@ -489,6 +489,16 @@
489 489  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
490 490  
491 491  
583 +=== **Upgrade the node.js** ===
584 +
585 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
586 +
587 +
588 +the users can refer to this link to upgrade them.
589 +
590 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
591 +
592 +
492 492  == 4.3 How to disable the built-in server ==
493 493  
494 494  
... ... @@ -537,9 +537,13 @@
537 537  [[image:image-20230222094908-1.png||height="133" width="798"]]
538 538  
539 539  
540 -= 5. How users can access LPS8-V2 using serial USB =
641 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
541 541  
542 542  
644 +
645 += 6. How users can access LPS8-V2 using serial USB =
646 +
647 +
543 543  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
544 544  
545 545  
... ... @@ -557,8 +557,8 @@
557 557  
558 558  **LPS8v2 UART connection photo**
559 559  
560 -[[image:image-20220804163015-1.png||height="621" width="466"]]
561 561  
666 +[[image:image-20230421094319-2.png||height="351" width="392"]]
562 562  
563 563  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
564 564  
... ... @@ -569,7 +569,7 @@
569 569  [[image:image-20220804164747-2.png||height="622" width="594"]]
570 570  
571 571  
572 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
677 += 7. Use the helium gateway-rs as the Data-only Hotspot =
573 573  
574 574  
575 575  == **Step 1: Configure Frequency Band** ==
... ... @@ -597,59 +597,72 @@
597 597  
598 598  **Access the gateway CLI via SSH.**
599 599  
600 -[[image:image-20220905165222-3.png]]
705 +[[image:image-20230425153417-2.png]]
601 601  
602 602  
603 -**Download gateway-rs.**
708 +**Install the new gateway-rs**
604 604  
605 -[[image:image-20220905165715-5.png]]
606 -
607 607  (% class="box infomessage" %)
608 608  (((
609 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
712 +**apt update && apt install helium-gateway**
610 610  )))
611 611  
715 +[[image:image-20230425154058-4.png]]
612 612  
613 -**Install gateway-rs.**
614 614  
615 -[[image:image-20220905165917-7.png]]
616 616  
719 +Option: If you installed the older gateway-rs, you have clean it
720 +
617 617  (% class="box infomessage" %)
618 618  (((
619 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
723 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
620 620  )))
621 621  
726 +[[image:image-20230425153823-3.png]]
622 622  
623 -**Modify configuration.**
624 624  
729 +**Change the region setting:**
625 625  
626 -[[image:image-20220905173847-12.png]]
627 627  
732 +(% class="box infomessage" %)
733 +(((
734 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
628 628  
736 +
737 +**e.g: **
738 +
739 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
740 +
741 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
742 +)))
743 +
744 +
745 +**Restart the gateway-rs**
746 +
629 629  (% class="box infomessage" %)
630 630  (((
631 -**region=<Enter regional parameters> \
632 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
633 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
749 +**systemctl restart helium_gateway**
634 634  )))
635 635  
752 +[[image:image-20230425155612-7.png||height="265" width="911"]]
636 636  
637 -**Restart the helium_gateway**
638 638  
639 -[[image:image-20220905170920-9.png]]
640 640  
756 +**Check the helium_gateway running status**
641 641  
758 +
642 642  (% class="box infomessage" %)
643 643  (((
644 -**systemctl restart helium_gateway**
761 +**systemctl status helium_gateway**
645 645  )))
646 646  
647 647  
648 -**Check the helium_gateway Log：**
765 +[[image:image-20230425154740-5.png]]
649 649  
650 -[[image:image-20220905173952-13.png]]
651 651  
652 652  
769 +**Check the helium_gateway Log：**
770 +
653 653  (% class="box infomessage" %)
654 654  (((
655 655  **journalctl -u helium_gateway -f**
... ... @@ -656,27 +656,38 @@
656 656  )))
657 657  
658 658  
659 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
777 +[[image:image-20230425155659-8.png]]
660 660  
661 -where the helium gateway log is shown:
662 662  
663 -[[image:image-20220905174534-14.png]]
780 += 8. OTA System Update =
664 664  
665 665  
666 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
783 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
667 667  
668 668  
669 -= 7. OTA System Update =
670 670  
787 += 9. FAQ =
671 671  
672 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
789 +== 9.1 How to change Hostname ==
673 673  
674 674  
675 -= 8. Trouble Shooting =
792 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
676 676  
677 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
794 +(% class="box infomessage" %)
795 +(((
796 +hostnamectl set-hostname dragino-123456
797 +)))
678 678  
799 +[[image:image-20230517102429-1.png]]
679 679  
801 +After the configuration is complete, run "reboot" to restart the gateway.
802 +
803 +
804 += 10. Trouble Shooting =
805 +
806 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
807 +
808 +
680 680  [[image:image-20220920135918-1.png]]
681 681  
682 682  
... ... @@ -692,9 +692,38 @@
692 692  [[image:image-20220920141936-2.png]]
693 693  
694 694  
695 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
824 +== 10.2 The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
696 696  
826 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
697 697  
828 +[[image:image-20230508171607-1.png]]
829 +
830 +
831 +== 10.3  Fallback IP does not work, how can users check ==
832 +
833 +
834 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
835 +
836 +
837 +**1.Check whether the configuration is correct**
838 +
839 +Run the CMD command to ipconfig and ping 172.31.255.254.
840 +
841 +If this fails, the user needs to reconfigure.
842 +
843 +[[image:image-20230413170224-3.png||height="433" width="707"]]
844 +
845 +[[image:image-20230413170246-4.png]]
846 +
847 +
848 +**2. Check whether the firewall is disabled**
849 +
850 +If the firewall is not down, this will affect access to the gateway.
851 +
852 +
853 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
854 +
855 +
698 698  (((
699 699  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
700 700  )))
... ... @@ -703,7 +703,7 @@
703 703  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
704 704  
705 705  
706 -= 10. Reference =
864 += 12. Reference =
707 707  
708 708  
709 709  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -712,7 +712,7 @@
712 712  
713 713  )))
714 714  
715 -= 11. Order Info =
873 += 13. Order Info =
716 716  
717 717  
718 718  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -736,7 +736,7 @@
736 736  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
737 737  
738 738  
739 -= 12. Manufacturer Info =
897 += 14. Manufacturer Info =
740 740  
741 741  
742 742  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -746,7 +746,7 @@
746 746  LongCheng Street, LongGang District ; Shenzhen 518116,China
747 747  
748 748  
749 -= 13. FCC Warning =
907 += 15. FCC Warning =
750 750  
751 751  
752 752  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0