Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 157.1 >
edited by Kilight Cao
on 2023/03/21 09:24
To version < 220.1 >
edited by Kilight Cao
on 2023/06/16 17:46
>
Change comment: Uploaded new attachment "image-20230616174608-5.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -83,37 +83,33 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
88 88  
89 89  
90 90  
91 -== 1.4 Block Diagram ==
91 +== 1.4 LED Indicators ==
92 92  
93 93  
94 -
95 -== 1.5 LED Indicators ==
96 -
97 -
98 98  LPS8-V2 has totally four LEDs, They are:
99 99  
100 100  
101 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
97 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
102 102  
103 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
99 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
101 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
106 106  
107 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
108 108  
109 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
110 110  
111 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
112 112  
113 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
109 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
114 114  
115 115  
116 -== 1.6 Button Intruction ==
112 +== 1.5 Button Intruction ==
117 117  
118 118  
119 119  LPS8-V2 has a black toggle button, which is:
... ... @@ -121,12 +121,12 @@
121 121  
122 122  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123 123  
124 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
125 125  
126 126  
127 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
123 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
128 128  
129 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
125 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
130 130  
131 131  
132 132  = 2. Quick Start =
... ... @@ -139,12 +139,27 @@
139 139  
140 140  == 2.1 Connects to the network and accesses the gateway Web UI ==
141 141  
142 -== 2.1.1 connect the network ==
138 +=== 2.1.1 connect the network ===
143 143  
144 144  
145 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
146 146  
147 147  
144 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +
146 +(% style="background-color:yellow" %)**dragino+dragino**
147 +
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +
155 +
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 +
158 +
148 148  (((
149 149  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
150 150  )))
... ... @@ -156,9 +156,10 @@
156 156  [[image:image-20220622100129-1.png||height="332" width="1263"]]
157 157  
158 158  
159 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
160 160  
171 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
161 161  
173 +
162 162  [[image:image-20230107084650-2.png||height="310" width="839"]]
163 163  
164 164  
... ... @@ -168,20 +168,28 @@
168 168  
169 169  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
170 170  
183 +
184 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
185 +
186 +
171 171  As in the below photo:
172 172  
173 -[[image:image-20230107085904-4.png||height="443" width="361"]]
189 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
174 174  
175 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
176 176  
192 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
177 177  
178 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
179 179  
180 180  
197 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
181 181  
182 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
199 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
183 183  
184 184  
202 +
203 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 +
185 185  [[image:image-20220622100542-2.png||height="369" width="1256"]]
186 186  
187 187  
... ... @@ -201,7 +201,7 @@
201 201  [[image:image-20220622102901-8.png||height="476" width="938"]]
202 202  
203 203  
204 -== 2.1.2 Access Configure Web UI ==
224 +=== 2.1.2 Access Configure Web UI ===
205 205  
206 206  
207 207  **Web Interface**
... ... @@ -215,18 +215,92 @@
215 215  
216 216  The account details for Web Login are:
217 217  
218 -(% style="color:#4f81bd" %)**User Name: root**
238 +(% style="color:blue" %)**User Name: root**
219 219  
220 -(% style="color:#4f81bd" %)**Password:   dragino**
240 +(% style="color:blue" %)**Password:   dragino**
221 221  
222 222  [[image:image-20230106153501-1.png||height="367" width="894"]]
223 223  
224 224  
225 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
245 +== 2.2  Typical Network Setup ==
226 226  
227 -=== 2.2.1 Select your area frequency ===
247 +=== 2.2.1  Overview ===
228 228  
229 229  
250 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 +
252 +* **WAN Port Internet Mode**
253 +
254 +* **WiFi Client Mode**
255 +
256 +* **Cellular Mode**
257 +
258 +
259 +
260 +=== 2.2.2  Use WAN port to access Internet ===
261 +
262 +
263 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
264 +
265 +
266 +[[image:image-20230411100633-2.png||height="501" width="935"]]
267 +
268 +
269 +=== 2.2.3  Access the Internet as a WiFi Client ===
270 +
271 +
272 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
273 +
274 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
275 +
276 +[[image:image-20230411095739-1.png||height="264" width="691"]]
277 +
278 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
279 +
280 +
281 +=== 2.2.4  Use built-in 4G modem for internet access ===
282 +
283 +
284 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
285 +
286 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
287 +
288 +
289 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
290 +
291 +First, install the Micro SIM card as below direction
292 +
293 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
294 +
295 +
296 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
297 +
298 +
299 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
300 +
301 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
302 +
303 +
304 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
305 +
306 +
307 +=== 2.2.5  Check Internet connection ===
308 +
309 +
310 +In the **home** page, we can check the Internet connection.
311 +
312 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
313 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
314 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
315 +
316 +[[image:image-20230411101534-3.png||height="544" width="942"]]
317 +
318 +
319 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
320 +
321 +=== 2.3.1 Select your area frequency ===
322 +
323 +
230 230  (((
231 231  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
232 232  
... ... @@ -236,7 +236,7 @@
236 236  [[image:image-20220622103332-9.png||height="485" width="938"]]
237 237  
238 238  
239 -=== 2.2.2 Get the only gateway EUI ===
333 +=== 2.3.2 Get the only gateway EUI ===
240 240  
241 241  
242 242  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -260,7 +260,7 @@
260 260  [[image:image-20220622103956-12.png]]
261 261  
262 262  
263 -== 2.2.3 Register the gateway to The Things Network ==
357 +=== 2.3.3 Register the gateway to The Things Network ===
264 264  
265 265  
266 266  **Login to The Things Network**
... ... @@ -281,7 +281,7 @@
281 281  == 3.1 Home ==
282 282  
283 283  
284 -//Shows the system running status~://
378 +Shows the system running status:
285 285  
286 286  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
287 287  
... ... @@ -291,15 +291,15 @@
291 291  === 3.2.1 LoRa ~-~-> LoRa ===
292 292  
293 293  
294 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
295 295  
296 -//Different LPS8v2 hardware versions can support different frequency ranges~://
390 +Different LPS8v2 hardware versions can support different frequency ranges:
297 297  
298 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
299 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
392 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
393 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
300 300  
301 301  (% class="wikigeneratedid" %)
302 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
303 303  
304 304  
305 305  (% class="wikigeneratedid" %)
... ... @@ -316,7 +316,7 @@
316 316  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
317 317  
318 318  
319 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
413 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
320 320  
321 321  
322 322  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -325,7 +325,7 @@
325 325  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
326 326  
327 327  
328 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
422 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
329 329  
330 330  
331 331  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -353,7 +353,7 @@
353 353  === 3.4.3 Network ~-~-> Network ===
354 354  
355 355  
356 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
450 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
357 357  
358 358  [[image:image-20230214093657-2.png||height="333" width="858"]]
359 359  
... ... @@ -361,7 +361,7 @@
361 361  === 3.4.4 Network ~-~-> Cellular ===
362 362  
363 363  
364 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
458 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
365 365  
366 366  (% style="color:red" %)**Note: APN cannot be empty.**
367 367  
... ... @@ -386,7 +386,7 @@
386 386  === 3.5.2 System ~-~-> System General ===
387 387  
388 388  
389 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
483 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
390 390  
391 391  In addition, Users can customize the FallBack IP address.
392 392  
... ... @@ -402,7 +402,7 @@
402 402  === 3.5.4 System ~-~-> Remoteit ===
403 403  
404 404  
405 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
499 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
406 406  
407 407  
408 408  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -413,7 +413,7 @@
413 413  === 3.5.5 System ~-~-> Package Management ===
414 414  
415 415  
416 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
510 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
417 417  
418 418  [[image:image-20230214094316-4.png]]
419 419  
... ... @@ -460,6 +460,16 @@
460 460  [[image:image-20220725171719-1.png||height="570" width="769"]]
461 461  
462 462  
557 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
558 +
559 +
560 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
561 +
562 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
563 +
564 +[[image:image-20230321092456-1.png]]
565 +
566 +
463 463  == 4.2 Application Server ~-~- Node-Red ==
464 464  
465 465  
... ... @@ -483,6 +483,16 @@
483 483  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
484 484  
485 485  
590 +=== **Upgrade the node.js** ===
591 +
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
593 +
594 +
595 +the users can refer to this link to upgrade them.
596 +
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
598 +
599 +
486 486  == 4.3 How to disable the built-in server ==
487 487  
488 488  
... ... @@ -524,16 +524,36 @@
524 524  == 4.4 How to use ChirpStack on LPS8-V2 ==
525 525  
526 526  
527 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
528 528  
529 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
530 530  
531 -[[image:image-20230222094908-1.png||height="133" width="798"]]
532 532  
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
533 533  
534 -= 5. How users can access LPS8-V2 using serial USB =
535 535  
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
536 536  
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
652 +
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
654 +
655 +
656 +When the configuration is complete, click** "Save&Apply"**.
657 +
658 +
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 +
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
662 +
663 +
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
665 +
666 +
667 +
668 += 6. How users can access LPS8-V2 using serial USB =
669 +
670 +
537 537  (% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
538 538  
539 539  
... ... @@ -551,8 +551,8 @@
551 551  
552 552  **LPS8v2 UART connection photo**
553 553  
554 -[[image:image-20220804163015-1.png||height="621" width="466"]]
555 555  
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
556 556  
557 557  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
558 558  
... ... @@ -563,7 +563,7 @@
563 563  [[image:image-20220804164747-2.png||height="622" width="594"]]
564 564  
565 565  
566 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
700 += 7. Use the helium gateway-rs as the Data-only Hotspot =
567 567  
568 568  
569 569  == **Step 1: Configure Frequency Band** ==
... ... @@ -591,59 +591,72 @@
591 591  
592 592  **Access the gateway CLI via SSH.**
593 593  
594 -[[image:image-20220905165222-3.png]]
728 +[[image:image-20230425153417-2.png]]
595 595  
596 596  
597 -**Download gateway-rs.**
731 +**Install the new gateway-rs**
598 598  
599 -[[image:image-20220905165715-5.png]]
600 -
601 601  (% class="box infomessage" %)
602 602  (((
603 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
735 +**apt update && apt install helium-gateway**
604 604  )))
605 605  
738 +[[image:image-20230425154058-4.png]]
606 606  
607 -**Install gateway-rs.**
608 608  
609 -[[image:image-20220905165917-7.png]]
610 610  
742 +Option: If you installed the older gateway-rs, you have clean it
743 +
611 611  (% class="box infomessage" %)
612 612  (((
613 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
746 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
614 614  )))
615 615  
749 +[[image:image-20230425153823-3.png]]
616 616  
617 -**Modify configuration.**
618 618  
752 +**Change the region setting:**
619 619  
620 -[[image:image-20220905173847-12.png]]
621 621  
755 +(% class="box infomessage" %)
756 +(((
757 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
622 622  
759 +
760 +**e.g: **
761 +
762 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
763 +
764 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
765 +)))
766 +
767 +
768 +**Restart the gateway-rs**
769 +
623 623  (% class="box infomessage" %)
624 624  (((
625 -**region=<Enter regional parameters> \
626 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
627 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
772 +**systemctl restart helium_gateway**
628 628  )))
629 629  
775 +[[image:image-20230425155612-7.png||height="265" width="911"]]
630 630  
631 -**Restart the helium_gateway**
632 632  
633 -[[image:image-20220905170920-9.png]]
634 634  
779 +**Check the helium_gateway running status**
635 635  
781 +
636 636  (% class="box infomessage" %)
637 637  (((
638 -**systemctl restart helium_gateway**
784 +**systemctl status helium_gateway**
639 639  )))
640 640  
641 641  
642 -**Check the helium_gateway Log：**
788 +[[image:image-20230425154740-5.png]]
643 643  
644 -[[image:image-20220905173952-13.png]]
645 645  
646 646  
792 +**Check the helium_gateway Log：**
793 +
647 647  (% class="box infomessage" %)
648 648  (((
649 649  **journalctl -u helium_gateway -f**
... ... @@ -650,27 +650,94 @@
650 650  )))
651 651  
652 652  
653 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
800 +[[image:image-20230425155659-8.png]]
654 654  
655 -where the helium gateway log is shown:
656 656  
657 -[[image:image-20220905174534-14.png]]
803 += 8. OTA System Update =
658 658  
659 659  
660 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
806 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
661 661  
662 662  
663 -= 7. OTA System Update =
809 +== 8.1 Auto-update method ==
664 664  
665 665  
666 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
812 +The default, each gateway will enable the auto-update function.
667 667  
814 +this function will be triggered every boot and every midnight.
668 668  
669 -= 8. Trouble Shooting =
670 670  
671 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
817 +Users can enable/disable it via Web Page
672 672  
819 +[[image:image-20230607094447-2.png]]
673 673  
821 +
822 +== 8.2 Manual upgrade method ==
823 +
824 +
825 +1). Using the Linux command to upgrade the system
826 +
827 +
828 +(% class="box infomessage" %)
829 +(((
830 +**apt update && apt install *dragino***
831 +)))
832 +
833 +
834 +2). Upgrade the system via the Web page button of "Manual Update"
835 +
836 +
837 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
838 +
839 +[[image:image-20230607093849-1.png]]
840 +
841 +
842 += 9. FAQ =
843 +
844 +== 9.1 How to change Hostname ==
845 +
846 +
847 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
848 +
849 +(% class="box infomessage" %)
850 +(((
851 +hostnamectl set-hostname dragino-123456
852 +)))
853 +
854 +[[image:image-20230517102429-1.png]]
855 +
856 +After the configuration is complete, run "reboot" to restart the gateway.
857 +
858 +
859 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
860 +
861 +
862 +Migrate guide:
863 +
864 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
865 +
866 +2. Download migrate script and run it.
867 +
868 +(% class="box infomessage" %)
869 +(((
870 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
871 +)))
872 +
873 +[[image:image-20230602135658-1.png||height="545" width="986"]]
874 +
875 +
876 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
877 +
878 +[[image:image-20230602135825-2.png||height="356" width="855"]]
879 +
880 +The default account for chirpstack is: **admin/admin**
881 +
882 +
883 += 10. Trouble Shooting =
884 +
885 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
886 +
887 +
674 674  [[image:image-20220920135918-1.png]]
675 675  
676 676  
... ... @@ -686,18 +686,57 @@
686 686  [[image:image-20220920141936-2.png]]
687 687  
688 688  
689 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
903 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
690 690  
691 691  
906 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
907 +
908 +[[image:image-20230508171607-1.png]]
909 +
910 +
911 +== 10.3  Fallback IP does not work, how can users check ==
912 +
913 +
914 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
915 +
916 +
917 +**1.Check whether the configuration is correct**
918 +
919 +Run the CMD command to ipconfig and ping 172.31.255.254.
920 +
921 +If this fails, the user needs to reconfigure.
922 +
923 +[[image:image-20230413170224-3.png||height="433" width="707"]]
924 +
925 +[[image:image-20230413170246-4.png]]
926 +
927 +
928 +**2. Check whether the firewall is disabled**
929 +
930 +If the firewall is not down, this will affect access to the gateway.
931 +
932 +
933 +== 10.4  Click "Manual_Update", why there is no response? ==
934 +
935 +
936 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
937 +
938 +
939 +[[image:image-20230527090555-3.png||height="660" width="832"]]
940 +
941 +
942 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
943 +
944 +
692 692  (((
693 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
946 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
694 694  )))
695 695  
696 696  (((
697 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
950 +With your question as detailed as possible. We will reply and help you in the shortest.
698 698  
699 699  
700 -= 10. Reference =
953 += 12. Reference =
701 701  
702 702  
703 703  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -707,7 +707,7 @@
707 707  
708 708  )))
709 709  
710 -= 11. Order Info =
963 += 13. Order Info =
711 711  
712 712  
713 713  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -715,23 +715,31 @@
715 715  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
716 716  
717 717  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
971 +
718 718  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
973 +
719 719  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
975 +
720 720  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
977 +
721 721  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
979 +
722 722  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
723 723  
724 724  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
725 725  
726 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
727 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
728 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
729 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
984 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
730 730  
986 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
987 +
988 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
989 +
990 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
991 +
731 731  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
732 732  
733 733  
734 -= 12. Manufacturer Info =
995 += 14. Manufacturer Info =
735 735  
736 736  
737 737  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -741,7 +741,7 @@
741 741  LongCheng Street, LongGang District ; Shenzhen 518116,China
742 742  
743 743  
744 -= 13. FCC Warning =
1005 += 15. FCC Warning =
745 745  
746 746  
747 747  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0