Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 155.1 >
edited by Kilight Cao
on 2023/02/28 11:57
To version < 83.1 >
edited by Xiaoye
on 2022/08/20 13:42
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -64,10 +64,9 @@
64 64  * Storage Temperature: -20 ~~ 65°C
65 65  * Power Input: 5V, 2A, DC
66 66  
65 +== **1.3 Features** ==
67 67  
68 -== 1.3 Features ==
69 69  
70 -
71 71  * Open Source Debian system
72 72  * Managed by Web GUI, SSH via WAN or WiFi
73 73  * Remote Management
... ... @@ -83,66 +83,52 @@
83 83  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
84 84  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
85 85  
83 +== **1.4 Block Diagram** ==
86 86  
87 -== 1.4 Block Diagram ==
88 88  
89 89  
87 +== **1.5 LED Indicators** ==
90 90  
91 -== 1.5 LED Indicators ==
92 92  
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 97  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
106 106  
107 107  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
110 110  
111 111  
112 -== 1.6 Button Intruction ==
113 113  
109 += **2. Quick Start** =
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
117 -
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119 -
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 -
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -== 2.1.1 connect the network ==
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
121 +== **2.1.1 connect the network.** ==
122 +
123 +
141 141  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
142 142  
143 143  
144 144  (((
145 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 146  )))
147 147  
148 148  (((
... ... @@ -152,35 +152,34 @@
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
154 154  
155 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
156 156  
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
157 157  
158 -[[image:image-20230107084650-2.png||height="310" width="839"]]
159 159  
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
160 160  
161 -(% style="color:blue" %)**Steps to connect via fallback IP:**
162 162  
163 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
164 164  
165 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
166 166  
167 -As in the below photo:
168 168  
169 -[[image:image-20230107085904-4.png||height="443" width="361"]]
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
170 170  
171 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
172 172  
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
173 173  
174 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
157 +[[image:image-20220622101433-4.png]]
175 175  
176 176  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
177 177  
178 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
179 179  
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
180 180  
181 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 -
184 184  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
185 185  
186 186  
... ... @@ -194,53 +194,32 @@
194 194  [[image:image-20220622102847-7.png]]
195 195  
196 196  
197 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
198 198  
199 199  
200 -== 2.1.2 Access Configure Web UI ==
201 201  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
202 202  
203 -**Web Interface**
204 204  
205 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
206 206  
207 207  
208 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
209 -
210 -You will see the login interface of LPS8-V2 as shown below.
211 -
212 -The account details for Web Login are:
213 -
214 -(% style="color:#4f81bd" %)**User Name: root**
215 -
216 -(% style="color:#4f81bd" %)**Password:   dragino**
217 -
218 -[[image:image-20230106153501-1.png||height="367" width="894"]]
219 -
220 -
221 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
222 -
223 -=== 2.2.1 Select your area frequency ===
224 -
225 -
226 226  (((
227 227  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
228 -
229 -
230 230  )))
231 231  
232 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
233 233  
234 234  
235 -=== 2.2.2 Get the only gateway EUI ===
236 236  
197 +=== **2.2.2 Get the only gateway EUI** ===
237 237  
199 +
238 238  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
239 239  
202 +[[image:image-20220622103355-10.png]]
240 240  
241 -[[image:image-20220622103355-10.png||height="698" width="949"]]
242 242  
243 -
244 244  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
245 245  
246 246  
... ... @@ -256,6 +256,7 @@
256 256  [[image:image-20220622103956-12.png]]
257 257  
258 258  
220 +
259 259  == 2.2.3 Register the gateway to The Things Network ==
260 260  
261 261  
... ... @@ -272,19 +272,20 @@
272 272  **Get it online**
273 273  
274 274  
275 -= 3. Web Configure Pages =
276 276  
277 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
278 278  
279 279  
241 +== **3.1 Home** ==
242 +
243 +
280 280  //Shows the system running status~://
281 281  
282 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
283 283  
247 +== **3.2 LoRa Settings** ==
284 284  
285 -== 3.2 LoRa Settings ==
286 286  
287 -=== 3.2.1 LoRa ~-~-> LoRa ===
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
288 288  
289 289  
290 290  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -297,131 +297,92 @@
297 297  (% class="wikigeneratedid" %)
298 298  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
299 299  
300 -
301 301  (% class="wikigeneratedid" %)
302 302  [[image:image-20220616110739-1.png||height="372" width="682"]]
303 303  
304 304  
305 305  (((
306 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
307 307  )))
308 308  
309 309  
310 -== 3.3 LoRaWAN Settings ==
311 311  
312 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
313 313  
314 314  
315 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
316 316  
317 317  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
318 318  [[image:image-20220616111932-2.png||height="516" width="672"]]
319 319  
320 320  
321 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
322 322  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
323 323  
287 +
324 324  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
325 325  
326 -
327 327  [[image:image-20220616113246-3.png||height="396" width="672"]]
328 328  
329 329  
330 330  (((
331 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
332 332  )))
333 333  
334 334  
335 -== 3.4 Network Settings ==
336 336  
337 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
338 338  
339 339  
340 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
341 341  
342 342  
343 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
344 344  
345 345  
346 -[[image:image-20220820134112-2.png||height="539" width="668"]]
347 347  
309 +=== **3.4.2 Network ~-~-> System Status** ===
348 348  
349 -=== 3.4.3 Network ~-~-> Network ===
350 350  
312 +[[image:image-20220820134112-2.png||height="539" width="668"]]
351 351  
352 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
353 353  
354 -[[image:image-20230214093657-2.png||height="333" width="858"]]
355 355  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
356 356  
357 -=== 3.4.4 Network ~-~-> Cellular ===
358 358  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
359 359  
360 -In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
361 361  
362 -[[image:image-20230228115126-1.png]]
363 363  
323 +== **3.5 System** ==
364 364  
365 -After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
366 366  
367 -[[image:image-20230228115535-2.png||height="478" width="888"]]
326 +=== **3.5.1  System ~-~-> System Overview** ===
368 368  
369 -== 3.5 System ==
370 370  
371 -=== 3.5.1 System ~-~-> System Overview ===
372 -
373 -
374 374  Shows the system info:
375 375  
376 -[[image:image-20220917144512-5.png||height="618" width="853"]]
377 377  
378 378  
379 -=== 3.5.2 System ~-~-> System General ===
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
380 380  
381 381  
382 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
383 383  
384 -In addition, Users can customize the FallBack IP address.
385 385  
386 -[[image:image-20230214094058-3.png]]
387 387  
340 += **4. Build-in Server** =
388 388  
389 -=== 3.5.3 System ~-~-> Backup/Restore ===
390 -
391 -
392 -[[image:image-20220917144725-6.png||height="208" width="869"]]
393 -
394 -
395 -=== 3.5.4 System ~-~-> Remoteit ===
396 -
397 -
398 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
399 -
400 -
401 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
402 -
403 -[[image:image-20221230092303-2.png]]
404 -
405 -
406 -=== 3.5.5 System ~-~-> Package Management ===
407 -
408 -
409 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
410 -
411 -[[image:image-20230214094316-4.png]]
412 -
413 -
414 -= 4. Build-in Server =
415 -
416 -
417 417  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
418 418  
344 +[[image:image-20220820115644-1.png]]
419 419  
420 -[[image:image-20230214095318-5.png||height="347" width="980"]]
421 421  
347 +Note:
422 422  
423 -(% style="color:red" %)**Note:**
424 -
425 425   **Path**: System ~-~-> Built-in Server
426 426  
427 427  
... ... @@ -430,16 +430,16 @@
430 430  
431 431  **~ 1. URL does not jump properly**
432 432  
433 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
357 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hotsname to the current local IP address as the URL.
434 434  
435 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
359 + For the Node-Red, you can use the local IP address and the port is 18880 to access it.
436 436  
437 437  
438 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
362 +(% class="wikigeneratedid" %)
363 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
439 439  
365 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
440 440  
441 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
442 -
443 443  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
444 444  
445 445  
... ... @@ -453,236 +453,53 @@
453 453  [[image:image-20220725171719-1.png||height="570" width="769"]]
454 454  
455 455  
456 -== 4.2 Application Server ~-~- Node-Red ==
457 457  
381 +== **4.2. Application Server ~-~- Node-Red** ==
458 458  
459 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
460 460  
384 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
461 461  
462 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
463 463  
387 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
464 464  
389 +
465 465  [[image:image-20220725172124-3.png||height="610" width="843"]]
466 466  
467 467  
468 468  
469 -=== **Using Node-Red, InfluxDB and Grafana** ===
394 += **6. How users can access LPS8v2 using serial USB** =
470 470  
471 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
472 472  
397 +**USB TTL to LPS8v2  Connection:**
473 473  
474 -the users can refer to this link to install them.
399 +Port 1 of the UART on the LPS8v2 is GND
475 475  
476 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
477 -
478 -
479 -== 4.3 How to disable the built-in server ==
480 -
481 -
482 -Use the following commands to start and stop the TTNv3 service:
483 -
484 484  (% class="box infomessage" %)
485 485  (((
486 -**# start**
487 -systemctl start ttnstack
403 +TXD  <~-~--> UART RXD (Gray line)
488 488  
489 -**# stop**
490 -systemctl stop ttnstack
405 +RXD  <~-~--> UART TXD (White line)
491 491  
492 -**# enable**
493 -systemctl enable ttnstack
494 -
495 -**#disable**
496 -systemctl disable ttnstack
407 +GND <~-~--> GND (Black line)
497 497  )))
498 498  
499 -Use the following commands to start and stop the Node-Red service:
500 500  
501 -(% class="box infomessage" %)
502 -(((
503 -**# start**
504 -systemctl start nodered
505 -
506 -**# stop**
507 -systemctl stop nodered
508 -
509 -**# enable**
510 -systemctl enable nodered
511 -
512 -**#disable**
513 -systemctl disable nodered
514 -)))
515 -
516 -
517 -== 4.4 How to use ChirpStack on LPS8-V2 ==
518 -
519 -
520 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
521 -
522 -[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
523 -
524 -[[image:image-20230222094908-1.png||height="133" width="798"]]
525 -
526 -
527 -= 5. How users can access LPS8-V2 using serial USB =
528 -
529 -
530 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
531 -
532 -
533 -Port 1 of the UART on the LPS8-V2 is GND
534 -
535 -(% class="box infomessage" %)
536 -(((
537 -**TXD  <~-~--> UART RXD (Gray line)**
538 -
539 -**RXD  <~-~--> UART TXD (White line)**
540 -
541 -**GND <~-~--> GND (Black line)**
542 -)))
543 -
544 -
545 545  **LPS8v2 UART connection photo**
546 546  
547 547  [[image:image-20220804163015-1.png||height="621" width="466"]]
548 548  
549 549  
416 +
550 550  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
551 551  
552 -
553 553  [[image:image-20220804164928-3.png||height="320" width="332"]]
554 554  
555 -
556 556  [[image:image-20220804164747-2.png||height="622" width="594"]]
557 557  
423 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
558 558  
559 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
560 560  
561 -
562 -== **Step 1: Configure Frequency Band** ==
563 -
564 -
565 -//Each country has a requirement for frequency region. Choose the right one for your area.//
566 -
567 -[[image:image-20220905164308-1.png]]
568 -
569 -
570 -
571 -== **Step 2: Configure the forward address** ==
572 -
573 -
574 -**Select one of the servers to configure.**
575 -
576 -**For example:**
577 -
578 -[[image:image-20220905164847-2.png]]
579 -
580 -
581 -
582 -== **Step 3: Download and Install the Helium-gateway-rs** ==
583 -
584 -
585 -**Access the gateway CLI via SSH.**
586 -
587 -[[image:image-20220905165222-3.png]]
588 -
589 -
590 -**Download gateway-rs.**
591 -
592 -[[image:image-20220905165715-5.png]]
593 -
594 -(% class="box infomessage" %)
595 595  (((
596 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
597 -)))
598 -
599 -
600 -**Install gateway-rs.**
601 -
602 -[[image:image-20220905165917-7.png]]
603 -
604 -(% class="box infomessage" %)
605 -(((
606 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
607 -)))
608 -
609 -
610 -**Modify configuration.**
611 -
612 -
613 -[[image:image-20220905173847-12.png]]
614 -
615 -
616 -(% class="box infomessage" %)
617 -(((
618 -**region=<Enter regional parameters> \
619 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
620 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
621 -)))
622 -
623 -
624 -**Restart the helium_gateway**
625 -
626 -[[image:image-20220905170920-9.png]]
627 -
628 -
629 -(% class="box infomessage" %)
630 -(((
631 -**systemctl restart helium_gateway**
632 -)))
633 -
634 -
635 -**Check the helium_gateway Log：**
636 -
637 -[[image:image-20220905173952-13.png]]
638 -
639 -
640 -(% class="box infomessage" %)
641 -(((
642 -**journalctl -u helium_gateway -f**
643 -)))
644 -
645 -
646 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
647 -
648 -where the helium gateway log is shown:
649 -
650 -[[image:image-20220905174534-14.png]]
651 -
652 -
653 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
654 -
655 -
656 -= 7. OTA System Update =
657 -
658 -
659 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
660 -
661 -
662 -= 8. Trouble Shooting =
663 -
664 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
665 -
666 -
667 -[[image:image-20220920135918-1.png]]
668 -
669 -
670 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
671 -
672 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
673 -
674 -
675 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
676 -
677 -**Click the update URL button to configure the URL with the current eth port address.**
678 -
679 -[[image:image-20220920141936-2.png]]
680 -
681 -
682 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
683 -
684 -
685 -(((
686 686  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
687 687  )))
688 688  
... ... @@ -690,9 +690,10 @@
690 690  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
691 691  
692 692  
693 -= 10. Reference =
694 694  
435 += **11 Reference** =
695 695  
437 +
696 696  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
697 697  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
698 698  
... ... @@ -699,7 +699,7 @@
699 699  
700 700  )))
701 701  
702 -= 11. Order Info =
444 += **12. Order Info** =
703 703  
704 704  
705 705  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -723,9 +723,10 @@
723 723  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
724 724  
725 725  
726 -= 12. Manufacturer Info =
727 727  
469 += **13. Manufacturer Info** =
728 728  
471 +
729 729  **Shenzhen Dragino Technology Development co. LTD**
730 730  
731 731  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -733,9 +733,10 @@
733 733  LongCheng Street, LongGang District ; Shenzhen 518116,China
734 734  
735 735  
736 -= 13. FCC Warning =
737 737  
480 += **14. FCC Warning** =
738 738  
482 +
739 739  (((
740 740  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
741 741  )))
... ... @@ -764,7 +764,5 @@
764 764  
765 765  (((
766 766  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
767 -
768 -
769 769  )))
770 770  )))
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -415.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0