Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 148.1 >
edited by Kilight Cao
on 2023/02/14 09:53
To version < 82.1 >
edited by Xiaoye
on 2022/08/20 13:41
>
Change comment: Uploaded new attachment "image-20220820134112-2.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -64,7 +64,7 @@
64 64  * Storage Temperature: -20 ~~ 65°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 -== 1.3 Features ==
65 +== **1.3 Features** ==
68 68  
69 69  
70 70  * Open Source Debian system
... ... @@ -82,11 +82,11 @@
82 82  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 83  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
83 +== **1.4 Block Diagram** ==
86 86  
87 87  
88 88  
89 -== 1.5 LED Indicators ==
87 +== **1.5 LED Indicators** ==
90 90  
91 91  
92 92  LPS8-V2 has totally four LEDs, They are:
... ... @@ -94,53 +94,40 @@
94 94  
95 95  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
104 104  
105 105  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
108 108  
109 109  
110 -== 1.6 Button Intruction ==
111 111  
109 += **2. Quick Start** =
112 112  
113 -LPS8-V2 has a black toggle button, which is:
114 114  
115 -
116 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 -
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
119 -
120 -
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
122 -
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
124 -
125 -
126 -= 2. Quick Start =
127 -
128 -
129 129  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
130 130  
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
135 135  
136 -== 2.1.1 connect the network ==
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 138  
121 +== **2.1.1 connect the network.** ==
122 +
123 +
139 139  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
140 140  
141 141  
142 142  (((
143 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
145 145  
146 146  (((
... ... @@ -150,35 +150,34 @@
150 150  [[image:image-20220622100129-1.png||height="332" width="1263"]]
151 151  
152 152  
153 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
154 154  
139 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
155 155  
156 -[[image:image-20230107084650-2.png||height="310" width="839"]]
157 157  
142 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
158 158  
159 -(% style="color:blue" %)**Steps to connect via fallback IP:**
160 160  
161 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
162 162  
163 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
164 164  
165 -As in the below photo:
166 166  
167 -[[image:image-20230107085904-4.png||height="443" width="361"]]
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
168 168  
169 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
170 170  
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
171 171  
172 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
157 +[[image:image-20220622101433-4.png]]
173 173  
174 174  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
175 175  
176 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
177 177  
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
178 178  
179 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
180 180  
181 -
182 182  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
183 183  
184 184  
... ... @@ -192,53 +192,32 @@
192 192  [[image:image-20220622102847-7.png]]
193 193  
194 194  
195 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
196 196  
197 197  
198 -== 2.1.2 Access Configure Web UI ==
199 199  
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
200 200  
201 -**Web Interface**
202 202  
203 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 +=== **2.2.1 Select your area frequency** ===
204 204  
205 205  
206 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
207 -
208 -You will see the login interface of LPS8-V2 as shown below.
209 -
210 -The account details for Web Login are:
211 -
212 -(% style="color:#4f81bd" %)**User Name: root**
213 -
214 -(% style="color:#4f81bd" %)**Password:   dragino**
215 -
216 -[[image:image-20230106153501-1.png||height="367" width="894"]]
217 -
218 -
219 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
220 -
221 -=== 2.2.1 Select your area frequency ===
222 -
223 -
224 224  (((
225 225  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
226 -
227 -
228 228  )))
229 229  
230 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
231 231  
232 232  
233 -=== 2.2.2 Get the only gateway EUI ===
234 234  
197 +=== **2.2.2 Get the only gateway EUI** ===
235 235  
199 +
236 236  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
237 237  
202 +[[image:image-20220622103355-10.png]]
238 238  
239 -[[image:image-20220622103355-10.png||height="698" width="949"]]
240 240  
241 -
242 242  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
243 243  
244 244  
... ... @@ -254,6 +254,7 @@
254 254  [[image:image-20220622103956-12.png]]
255 255  
256 256  
220 +
257 257  == 2.2.3 Register the gateway to The Things Network ==
258 258  
259 259  
... ... @@ -270,19 +270,20 @@
270 270  **Get it online**
271 271  
272 272  
273 -= 3. Web Configure Pages =
274 274  
275 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
276 276  
277 277  
241 +== **3.1 Home** ==
242 +
243 +
278 278  //Shows the system running status~://
279 279  
280 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
281 281  
247 +== **3.2 LoRa Settings** ==
282 282  
283 -== 3.2 LoRa Settings ==
284 284  
285 -=== 3.2.1 LoRa ~-~-> LoRa ===
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
286 286  
287 287  
288 288  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -289,143 +289,97 @@
289 289  
290 290  //Different LPS8v2 hardware versions can support different frequency ranges~://
291 291  
292 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
293 293  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
294 294  
295 295  (% class="wikigeneratedid" %)
296 296  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
297 297  
298 -
299 299  (% class="wikigeneratedid" %)
300 300  [[image:image-20220616110739-1.png||height="372" width="682"]]
301 301  
302 302  
303 303  (((
304 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
305 305  )))
306 306  
307 307  
308 -== 3.3 LoRaWAN Settings ==
309 309  
310 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
311 311  
312 312  
313 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
314 314  
315 315  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
316 316  [[image:image-20220616111932-2.png||height="516" width="672"]]
317 317  
318 318  
319 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
320 320  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
321 321  
287 +
322 322  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
323 323  
324 -
325 325  [[image:image-20220616113246-3.png||height="396" width="672"]]
326 326  
327 327  
328 328  (((
329 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
330 330  )))
331 331  
332 332  
333 -== 3.4 Network Settings ==
334 334  
335 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
336 336  
337 337  
338 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
339 339  
340 340  
341 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
342 342  
343 343  
344 -[[image:image-20220820134112-2.png||height="539" width="668"]]
345 345  
309 +=== **3.4.2 Network ~-~-> System Status** ===
346 346  
347 -=== 3.4.3 Network ~-~-> Network ===
348 348  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
349 349  
350 -In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
351 351  
352 -[[image:image-20230214093657-2.png||height="333" width="858"]]
353 353  
316 +=== **3.4.3 Network ~-~-> Firewall** ===
354 354  
355 -== 3.5 System ==
356 356  
357 -=== 3.5.1 System ~-~-> System Overview ===
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
358 358  
359 359  
360 -Shows the system info:
361 361  
362 -[[image:image-20220917144512-5.png||height="618" width="853"]]
323 +== **3.5 System** ==
363 363  
364 364  
365 -=== 3.5.2 System ~-~-> System General ===
326 +=== **3.5.1  System ~-~-> System Overview** ===
366 366  
367 367  
368 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
329 +Shows the system info:
369 369  
370 -In addition, Users can customize the FallBack IP address.
371 371  
372 -[[image:image-20230214094058-3.png]]
373 373  
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
374 374  
375 -=== 3.5.3 System ~-~-> Backup/Restore ===
376 376  
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
377 377  
378 -[[image:image-20220917144725-6.png||height="208" width="869"]]
379 379  
380 380  
381 -=== 3.5.4 System ~-~-> Remoteit ===
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
382 382  
383 383  
384 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
385 385  
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
386 386  
387 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
388 388  
389 -[[image:image-20221230092303-2.png]]
390 -
391 -
392 -=== 3.5.5 System ~-~-> Package Management ===
393 -
394 -
395 -In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
396 -
397 -[[image:image-20230214094316-4.png]]
398 -
399 -
400 -= 4. Build-in Server =
401 -
402 -
403 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
404 -
405 -
406 -[[image:image-20220820115644-1.png||height="217" width="778"]]
407 -
408 -
409 -(% style="color:red" %)**Note:**
410 -
411 - **Path**: System ~-~-> Built-in Server
412 -
413 -
414 -**Troubleshooting:**
415 -
416 -
417 -**~ 1. URL does not jump properly**
418 -
419 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
420 -
421 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
422 -
423 -
424 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
425 -
426 -
427 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
428 -
429 429  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
430 430  
431 431  
... ... @@ -439,233 +439,86 @@
439 439  [[image:image-20220725171719-1.png||height="570" width="769"]]
440 440  
441 441  
442 -== 4.2 Application Server ~-~- Node-Red ==
443 -
444 -
445 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
446 -
447 -
448 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
449 -
450 -
451 -[[image:image-20220725172124-3.png||height="610" width="843"]]
452 -
453 -
454 -
455 -=== **Using Node-Red, InfluxDB and Grafana** ===
456 -
457 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
458 -
459 -
460 -the users can refer to this link to install them.
461 -
462 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
463 -
464 -
465 -== 4.3 How to disable the built-in server ==
466 -
467 -
468 -Use the following commands to start and stop the TTNv3 service:
469 -
470 -(% class="box infomessage" %)
471 471  (((
472 -**# start**
473 -systemctl start ttnstack
474 -
475 -**# stop**
476 -systemctl stop ttnstack
477 -
478 -**# enable**
479 -systemctl enable ttnstack
480 -
481 -**#disable**
482 -systemctl disable ttnstack
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
483 483  )))
484 484  
485 -Use the following commands to start and stop the Node-Red service:
486 486  
487 487  (% class="box infomessage" %)
488 488  (((
489 -**# start**
490 -systemctl start nodered
491 -
492 -**# stop**
493 -systemctl stop nodered
494 -
495 -**# enable**
496 -systemctl enable nodered
497 -
498 -**#disable**
499 -systemctl disable nodered
500 -)))
501 -
502 -
503 -== 4.4 How to use ChirpStack on LPS8-V2 ==
504 -
505 -
506 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
507 -
508 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack]]
509 -
510 -
511 -= 5. How users can access LPS8-V2 using serial USB =
512 -
513 -
514 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
515 -
516 -
517 -Port 1 of the UART on the LPS8-V2 is GND
518 -
519 -(% class="box infomessage" %)
520 520  (((
521 -**TXD  <~-~--> UART RXD (Gray line)**
522 -
523 -**RXD  <~-~--> UART TXD (White line)**
524 -
525 -**GND <~-~--> GND (Black line)**
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
526 526  )))
373 +)))
527 527  
528 528  
529 -**LPS8v2 UART connection photo**
530 530  
531 -[[image:image-20220804163015-1.png||height="621" width="466"]]
377 += **5. Build-in Application Server ~-~- Node-Red** =
532 532  
533 533  
534 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
535 535  
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
536 536  
537 -[[image:image-20220804164928-3.png||height="320" width="332"]]
538 538  
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
539 539  
540 -[[image:image-20220804164747-2.png||height="622" width="594"]]
541 541  
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
542 542  
543 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
544 544  
545 -
546 -== **Step 1: Configure Frequency Band** ==
547 -
548 -
549 -//Each country has a requirement for frequency region. Choose the right one for your area.//
550 -
551 -[[image:image-20220905164308-1.png]]
552 -
553 -
554 -
555 -== **Step 2: Configure the forward address** ==
556 -
557 -
558 -**Select one of the servers to configure.**
559 -
560 -**For example:**
561 -
562 -[[image:image-20220905164847-2.png]]
563 -
564 -
565 -
566 -== **Step 3: Download and Install the Helium-gateway-rs** ==
567 -
568 -
569 -**Access the gateway CLI via SSH.**
570 -
571 -[[image:image-20220905165222-3.png]]
572 -
573 -
574 -**Download gateway-rs.**
575 -
576 -[[image:image-20220905165715-5.png]]
577 -
578 -(% class="box infomessage" %)
579 579  (((
580 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
581 581  )))
582 582  
583 583  
584 -**Install gateway-rs.**
585 585  
586 -[[image:image-20220905165917-7.png]]
587 -
588 588  (% class="box infomessage" %)
589 589  (((
590 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
400 +(((
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
591 591  )))
404 +)))
592 592  
406 +[[image:image-20220728102000-1.png]]
593 593  
594 -**Modify configuration.**
595 595  
409 += **6. How users can access LPS8v2 using serial USB** =
596 596  
597 -[[image:image-20220905173847-12.png]]
598 598  
412 +**USB TTL to LPS8v2  Connection:**
599 599  
600 -(% class="box infomessage" %)
601 -(((
602 -**region=<Enter regional parameters> \
603 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
604 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
605 -)))
414 +Port 1 of the UART on the LPS8v2 is GND
606 606  
607 -
608 -**Restart the helium_gateway**
609 -
610 -[[image:image-20220905170920-9.png]]
611 -
612 -
613 613  (% class="box infomessage" %)
614 614  (((
615 -**systemctl restart helium_gateway**
616 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
617 617  
420 +RXD  <~-~--> UART TXD (White line)
618 618  
619 -**Check the helium_gateway Log：**
620 -
621 -[[image:image-20220905173952-13.png]]
622 -
623 -
624 -(% class="box infomessage" %)
625 -(((
626 -**journalctl -u helium_gateway -f**
422 +GND <~-~--> GND (Black line)
627 627  )))
628 628  
629 629  
630 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
426 +**LPS8v2 UART connection photo**
631 631  
632 -where the helium gateway log is shown:
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
633 633  
634 -[[image:image-20220905174534-14.png]]
635 635  
636 636  
637 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
638 638  
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
639 639  
640 -= 7. OTA System Update =
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
641 641  
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
642 642  
643 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
644 644  
645 -
646 -= 8. Trouble Shooting =
647 -
648 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
649 -
650 -
651 -[[image:image-20220920135918-1.png]]
652 -
653 -
654 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
655 -
656 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
657 -
658 -
659 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
660 -
661 -**Click the update URL button to configure the URL with the current eth port address.**
662 -
663 -[[image:image-20220920141936-2.png]]
664 -
665 -
666 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
667 -
668 -
669 669  (((
670 670  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
671 671  )))
... ... @@ -674,9 +674,10 @@
674 674  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
675 675  
676 676  
677 -= 10. Reference =
678 678  
450 += **11 Reference** =
679 679  
452 +
680 680  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
681 681  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
682 682  
... ... @@ -683,7 +683,7 @@
683 683  
684 684  )))
685 685  
686 -= 11. Order Info =
459 += **12. Order Info** =
687 687  
688 688  
689 689  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -707,9 +707,10 @@
707 707  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
708 708  
709 709  
710 -= 12. Manufacturer Info =
711 711  
484 += **13. Manufacturer Info** =
712 712  
486 +
713 713  **Shenzhen Dragino Technology Development co. LTD**
714 714  
715 715  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -717,9 +717,10 @@
717 717  LongCheng Street, LongGang District ; Shenzhen 518116,China
718 718  
719 719  
720 -= 13. FCC Warning =
721 721  
495 += **14. FCC Warning** =
722 722  
497 +
723 723  (((
724 724  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
725 725  )))
... ... @@ -748,7 +748,5 @@
748 748  
749 749  (((
750 750  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
751 -
752 -
753 753  )))
754 754  )))
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0