Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 142.1 >
edited by Kilight Cao
on 2023/02/14 09:36
To version < 83.2 >
edited by Xiaoling
on 2022/08/23 09:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -16,11 +16,12 @@
16 16  
17 17  
18 18  
19 -= 1. Introduction =
19 += **1. Introduction** =
20 20  
21 -== 1.1 What is LPS8v2 ==
22 22  
22 +== **1.1 What is LPS8v2** ==
23 23  
24 +
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
48 +== **1.2 Specifications** ==
48 48  
50 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -66,9 +66,10 @@
66 66  
67 67  
68 68  
69 -== 1.3 Features ==
70 70  
72 +== **1.3 Features** ==
71 71  
74 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -84,67 +84,52 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
90 +== **1.4 Block Diagram** ==
87 87  
88 88  
89 -== 1.4 Block Diagram ==
90 90  
94 +== **1.5 LED Indicators** ==
91 91  
92 92  
93 -== 1.5 LED Indicators ==
94 -
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 99  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
102 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
104 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
106 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
108 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
108 108  
109 109  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
112 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
112 112  
113 113  
114 -== 1.6 Button Intruction ==
115 115  
116 += **2. Quick Start** =
116 116  
117 -LPS8-V2 has a black toggle button, which is:
118 118  
119 -
120 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 -
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 -
124 -
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 -
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 -
129 -
130 -= 2. Quick Start =
131 -
132 -
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
139 139  
140 -== 2.1.1 connect the network ==
125 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
141 141  
142 142  
128 +== **2.1.1 connect the network.** ==
129 +
130 +
143 143  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
144 144  
145 145  
146 146  (((
147 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
135 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  )))
149 149  
150 150  (((
... ... @@ -154,35 +154,34 @@
154 154  [[image:image-20220622100129-1.png||height="332" width="1263"]]
155 155  
156 156  
157 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
158 158  
146 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
159 159  
160 -[[image:image-20230107084650-2.png||height="310" width="839"]]
161 161  
149 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 -(% style="color:blue" %)**Steps to connect via fallback IP:**
164 164  
165 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
152 +(((
153 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
154 +)))
166 166  
167 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
168 168  
169 -As in the below photo:
170 170  
171 -[[image:image-20230107085904-4.png||height="443" width="361"]]
158 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
172 172  
173 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
160 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
174 174  
162 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
175 175  
176 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
164 +[[image:image-20220622101433-4.png]]
177 177  
178 178  
167 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
179 179  
180 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
181 181  
170 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
182 182  
183 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
184 184  
185 -
186 186  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
187 187  
188 188  
... ... @@ -196,53 +196,32 @@
196 196  [[image:image-20220622102847-7.png]]
197 197  
198 198  
199 -[[image:image-20220622102901-8.png||height="476" width="938"]]
186 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
200 200  
201 201  
202 -== 2.1.2 Access Configure Web UI ==
203 203  
190 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
204 204  
205 -**Web Interface**
206 206  
207 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
193 +=== **2.2.1 Select your area frequency** ===
208 208  
209 209  
210 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
211 -
212 -You will see the login interface of LPS8-V2 as shown below.
213 -
214 -The account details for Web Login are:
215 -
216 -(% style="color:#4f81bd" %)**User Name: root**
217 -
218 -(% style="color:#4f81bd" %)**Password:   dragino**
219 -
220 -[[image:image-20230106153501-1.png||height="367" width="894"]]
221 -
222 -
223 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
224 -
225 -=== 2.2.1 Select your area frequency ===
226 -
227 -
228 228  (((
229 229  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
230 -
231 -
232 232  )))
233 233  
234 -[[image:image-20220622103332-9.png||height="485" width="938"]]
200 +[[image:image-20220622103332-9.png]]
235 235  
236 236  
237 -=== 2.2.2 Get the only gateway EUI ===
238 238  
204 +=== **2.2.2 Get the only gateway EUI** ===
239 239  
206 +
240 240  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
241 241  
209 +[[image:image-20220622103355-10.png]]
242 242  
243 -[[image:image-20220622103355-10.png||height="698" width="949"]]
244 244  
245 -
246 246  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
247 247  
248 248  
... ... @@ -258,6 +258,7 @@
258 258  [[image:image-20220622103956-12.png]]
259 259  
260 260  
227 +
261 261  == 2.2.3 Register the gateway to The Things Network ==
262 262  
263 263  
... ... @@ -274,19 +274,20 @@
274 274  **Get it online**
275 275  
276 276  
277 -= 3. Web Configure Pages =
278 278  
279 -== 3.1 Home ==
245 += **3. Web Configure Pages** =
280 280  
281 281  
248 +== **3.1 Home** ==
249 +
250 +
282 282  //Shows the system running status~://
283 283  
284 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
285 285  
254 +== **3.2 LoRa Settings** ==
286 286  
287 -== 3.2 LoRa Settings ==
288 288  
289 -=== 3.2.1 LoRa ~-~-> LoRa ===
257 +=== **3.2.1 LoRa ~-~-> LoRa** ===
290 290  
291 291  
292 292  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -299,107 +299,92 @@
299 299  (% class="wikigeneratedid" %)
300 300  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
301 301  
302 -
303 303  (% class="wikigeneratedid" %)
304 304  [[image:image-20220616110739-1.png||height="372" width="682"]]
305 305  
306 306  
307 307  (((
308 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
275 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
309 309  )))
310 310  
311 311  
312 -== 3.3 LoRaWAN Settings ==
313 313  
314 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
280 +== **3.3 LoRaWAN Settings** ==
315 315  
316 316  
317 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
283 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
318 318  
319 319  
286 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 +
320 320  [[image:image-20220616111932-2.png||height="516" width="672"]]
321 321  
322 322  
323 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
324 324  
292 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
325 325  
294 +
326 326  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
327 327  
328 -
329 329  [[image:image-20220616113246-3.png||height="396" width="672"]]
330 330  
331 331  
332 332  (((
333 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
301 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
334 334  )))
335 335  
336 336  
337 -== 3.4 Network Settings ==
338 338  
339 -=== 3.4.1 Network ~-~-> WiFi ===
306 +== **3.4 Network Settings** ==
340 340  
341 341  
342 -[[image:image-20220616114756-4.png||height="251" width="669"]]
309 +=== **3.4.1 Network ~-~-> WiFi** ===
343 343  
344 344  
345 -=== 3.4.2 Network ~-~-> System Status ===
312 +[[image:image-20220616114756-4.png||height="251" width="669"]]
346 346  
347 347  
348 -[[image:image-20220820134112-2.png||height="539" width="668"]]
349 349  
316 +=== **3.4.2 Network ~-~-> System Status** ===
350 350  
351 -=== 3.4.3 Network ~-~-> Firewall ===
352 352  
319 +[[image:image-20220820134112-2.png||height="539" width="668"]]
353 353  
354 -[[image:image-20220616115351-6.png||height="244" width="661"]]
355 355  
356 356  
357 -== 3.5 System ==
323 +=== **3.4.3 Network ~-~-> Firewall** ===
358 358  
359 -=== 3.5.1 System ~-~-> System Overview ===
360 360  
326 +[[image:image-20220616115351-6.png||height="244" width="661"]]
361 361  
362 -Shows the system info:
363 363  
364 -[[image:image-20220917144512-5.png||height="618" width="853"]]
365 365  
330 +== **3.5 System** ==
366 366  
367 -=== 3.5.2 System ~-~-> System General ===
368 368  
333 +=== **3.5.1  System ~-~-> System Overview** ===
369 369  
370 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
371 371  
372 -[[image:image-20230107084158-1.png||height="543" width="844"]]
336 +Shows the system info:
373 373  
374 374  
375 -=== 3.5.3 System ~-~-> Backup/Restore ===
376 376  
340 +=== **3.5.2 System ~-~-> Backup/Restore** ===
377 377  
378 -[[image:image-20220917144725-6.png||height="208" width="869"]]
379 379  
343 +[[image:image-20220616115808-7.png||height="194" width="649"]]
380 380  
381 -=== 3.5.4 System ~-~-> Remoteit ===
382 382  
383 383  
384 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
347 += **4. Build-in Server** =
385 385  
386 -
387 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
388 -
389 -[[image:image-20221230092303-2.png]]
390 -
391 -
392 -= 4. Build-in Server =
393 -
394 -
395 395  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
396 396  
351 +[[image:image-20220820115644-1.png]]
397 397  
398 -[[image:image-20220820115644-1.png||height="217" width="778"]]
399 399  
354 +Note:
400 400  
401 -(% style="color:red" %)**Note:**
402 -
403 403   **Path**: System ~-~-> Built-in Server
404 404  
405 405  
... ... @@ -408,16 +408,15 @@
408 408  
409 409  **~ 1. URL does not jump properly**
410 410  
411 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
364 + For the ttn-stack, you can click the update the URL which will update the configuration where change the hotsname to the current local IP address as the URL.
412 412  
413 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
366 + For the Node-Red, you can use the local IP address and the port is 18880 to access it.
414 414  
415 415  
416 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
369 +== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
417 417  
371 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
418 418  
419 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
420 -
421 421  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
422 422  
423 423  
... ... @@ -431,234 +431,53 @@
431 431  [[image:image-20220725171719-1.png||height="570" width="769"]]
432 432  
433 433  
434 -== 4.2 Application Server ~-~- Node-Red ==
435 435  
387 +== **4.2. Application Server ~-~- Node-Red** ==
436 436  
437 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
438 438  
390 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
439 439  
440 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
441 441  
393 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
442 442  
395 +
443 443  [[image:image-20220725172124-3.png||height="610" width="843"]]
444 444  
445 445  
446 446  
447 -=== **Using Node-Red, InfluxDB and Grafana** ===
400 += **6. How users can access LPS8v2 using serial USB** =
448 448  
449 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
450 450  
403 +**USB TTL to LPS8v2  Connection:**
451 451  
452 -the users can refer to this link to install them.
405 +Port 1 of the UART on the LPS8v2 is GND
453 453  
454 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
455 -
456 -
457 -== 4.3 How to disable the built-in server ==
458 -
459 -
460 -Use the following commands to start and stop the TTNv3 service:
461 -
462 462  (% class="box infomessage" %)
463 463  (((
464 -**# start**
465 -systemctl start ttnstack
409 +TXD  <~-~--> UART RXD (Gray line)
466 466  
467 -**# stop**
468 -systemctl stop ttnstack
411 +RXD  <~-~--> UART TXD (White line)
469 469  
470 -**# enable**
471 -systemctl enable ttnstack
472 -
473 -**#disable**
474 -systemctl disable ttnstack
413 +GND <~-~--> GND (Black line)
475 475  )))
476 476  
477 -Use the following commands to start and stop the Node-Red service:
478 478  
479 -(% class="box infomessage" %)
480 -(((
481 -**# start**
482 -systemctl start nodered
483 -
484 -**# stop**
485 -systemctl stop nodered
486 -
487 -**# enable**
488 -systemctl enable nodered
489 -
490 -**#disable**
491 -systemctl disable nodered
492 -)))
493 -
494 -
495 -== 4.4 How to use ChirpStack on LPS8-V2 ==
496 -
497 -
498 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
499 -
500 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack]]
501 -
502 -
503 -= 5. How users can access LPS8-V2 using serial USB =
504 -
505 -
506 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
507 -
508 -
509 -Port 1 of the UART on the LPS8-V2 is GND
510 -
511 -(% class="box infomessage" %)
512 -(((
513 -**TXD  <~-~--> UART RXD (Gray line)**
514 -
515 -**RXD  <~-~--> UART TXD (White line)**
516 -
517 -**GND <~-~--> GND (Black line)**
518 -)))
519 -
520 -
521 521  **LPS8v2 UART connection photo**
522 522  
523 523  [[image:image-20220804163015-1.png||height="621" width="466"]]
524 524  
525 525  
422 +
526 526  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
527 527  
528 -
529 529  [[image:image-20220804164928-3.png||height="320" width="332"]]
530 530  
531 -
532 532  [[image:image-20220804164747-2.png||height="622" width="594"]]
533 533  
429 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
534 534  
535 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
536 536  
537 -
538 -== **Step 1: Configure Frequency Band** ==
539 -
540 -
541 -//Each country has a requirement for frequency region. Choose the right one for your area.//
542 -
543 -[[image:image-20220905164308-1.png]]
544 -
545 -
546 -
547 -== **Step 2: Configure the forward address** ==
548 -
549 -
550 -**Select one of the servers to configure.**
551 -
552 -**For example:**
553 -
554 -[[image:image-20220905164847-2.png]]
555 -
556 -
557 -
558 -== **Step 3: Download and Install the Helium-gateway-rs** ==
559 -
560 -
561 -**Access the gateway CLI via SSH.**
562 -
563 -[[image:image-20220905165222-3.png]]
564 -
565 -
566 -**Download gateway-rs.**
567 -
568 -[[image:image-20220905165715-5.png]]
569 -
570 -(% class="box infomessage" %)
571 571  (((
572 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
573 -)))
574 -
575 -
576 -**Install gateway-rs.**
577 -
578 -[[image:image-20220905165917-7.png]]
579 -
580 -(% class="box infomessage" %)
581 -(((
582 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
583 -)))
584 -
585 -
586 -**Modify configuration.**
587 -
588 -
589 -[[image:image-20220905173847-12.png]]
590 -
591 -
592 -(% class="box infomessage" %)
593 -(((
594 -**region=<Enter regional parameters> \
595 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
596 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
597 -)))
598 -
599 -
600 -**Restart the helium_gateway**
601 -
602 -[[image:image-20220905170920-9.png]]
603 -
604 -
605 -(% class="box infomessage" %)
606 -(((
607 -**systemctl restart helium_gateway**
608 -)))
609 -
610 -
611 -**Check the helium_gateway Log：**
612 -
613 -[[image:image-20220905173952-13.png]]
614 -
615 -
616 -(% class="box infomessage" %)
617 -(((
618 -**journalctl -u helium_gateway -f**
619 -)))
620 -
621 -
622 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
623 -
624 -where the helium gateway log is shown:
625 -
626 -[[image:image-20220905174534-14.png]]
627 -
628 -
629 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
630 -
631 -
632 -= 7. OTA System Update =
633 -
634 -
635 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
636 -
637 -
638 -= 8. Trouble Shooting =
639 -
640 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
641 -
642 -
643 -[[image:image-20220920135918-1.png]]
644 -
645 -
646 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
647 -
648 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
649 -
650 -
651 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
652 -
653 -**Click the update URL button to configure the URL with the current eth port address.**
654 -
655 -[[image:image-20220920141936-2.png]]
656 -
657 -
658 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
659 -
660 -
661 -(((
662 662  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
663 663  )))
664 664  
... ... @@ -666,17 +666,17 @@
666 666  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
667 667  
668 668  
669 -= 10. Reference =
670 670  
441 += **11 Reference** =
671 671  
443 +
672 672  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
673 673  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
674 674  
675 -
676 676  
677 677  )))
678 678  
679 -= 11. Order Info =
450 += **12. Order Info** =
680 680  
681 681  
682 682  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -700,9 +700,10 @@
700 700  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
701 701  
702 702  
703 -= 12. Manufacturer Info =
704 704  
475 += **13. Manufacturer Info** =
705 705  
477 +
706 706  **Shenzhen Dragino Technology Development co. LTD**
707 707  
708 708  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -710,9 +710,10 @@
710 710  LongCheng Street, LongGang District ; Shenzhen 518116,China
711 711  
712 712  
713 -= 13. FCC Warning =
714 714  
486 += **14. FCC Warning** =
715 715  
488 +
716 716  (((
717 717  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
718 718  )))
... ... @@ -741,7 +741,5 @@
741 741  
742 742  (((
743 743  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
744 -
745 -
746 746  )))
747 747  )))
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0