Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 142.1 >
edited by Kilight Cao
on 2023/02/14 09:36
To version < 296.1 >
edited by Edwin Chen
on 2024/03/18 09:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 -- LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Edwin
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents：**
11 +**Table of Contents:**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,15 +57,15 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 -
68 -
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,52 +81,57 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 +== 1.4 LED Indicators ==
87 87  
88 88  
89 -== 1.4 Block Diagram ==
90 +LPS8-V2 has totally four LEDs, They are:
90 90  
91 91  
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
92 92  
93 -== 1.5 LED Indicators ==
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
94 94  
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
95 95  
96 -LPS8-V2 has totally four LEDs, They are:
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
97 97  
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
98 98  
99 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 +== 1.5 Button Intruction ==
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
108 108  
109 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
111 +LPS8-V2 has a black toggle button, which is:
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
112 112  
114 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
113 113  
114 -== 1.6 Button Intruction ==
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
115 115  
116 116  
117 -LPS8-V2 has a black toggle button, which is:
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
118 118  
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
119 119  
120 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 121  
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
123 123  
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
124 124  
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 126  
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
129 +When the gateway restores the factory settings is complete,
128 128  
131 +The WiFi configuration will enable WiFi Access Point by default.
129 129  
133 +The other configuration will be restored to the default configuration.
134 +
130 130  = 2. Quick Start =
131 131  
132 132  
... ... @@ -135,14 +135,29 @@
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
143 +== 2.1 Access and Configure LPS8-V2 ==
139 139  
140 -== 2.1.1 connect the network ==
145 +=== 2.1.1 Find IP address of LPS8-V2 ===
141 141  
142 142  
143 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
144 144  
145 145  
151 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
152 +
153 +(% style="background-color:yellow" %)**dragino+dragino**
154 +
155 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
156 +
157 +[[image:image-20230527084515-1.png]]
158 +
159 +[[image:image-20230527085250-2.png||height="495" width="284"]]
160 +
161 +
162 +
163 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 +
165 +
146 146  (((
147 147  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  )))
... ... @@ -154,9 +154,10 @@
154 154  [[image:image-20220622100129-1.png||height="332" width="1263"]]
155 155  
156 156  
157 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
158 158  
178 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
159 159  
180 +
160 160  [[image:image-20230107084650-2.png||height="310" width="839"]]
161 161  
162 162  
... ... @@ -166,20 +166,28 @@
166 166  
167 167  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
168 168  
190 +
191 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
192 +
193 +
169 169  As in the below photo:
170 170  
171 -[[image:image-20230107085904-4.png||height="443" width="361"]]
196 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
172 172  
173 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
174 174  
199 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
175 175  
176 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
177 177  
178 178  
204 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
179 179  
180 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
206 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
181 181  
182 182  
209 +
210 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
211 +
183 183  [[image:image-20220622100542-2.png||height="369" width="1256"]]
184 184  
185 185  
... ... @@ -199,7 +199,7 @@
199 199  [[image:image-20220622102901-8.png||height="476" width="938"]]
200 200  
201 201  
202 -== 2.1.2 Access Configure Web UI ==
231 +=== 2.1.2 Access Configure Web UI ===
203 203  
204 204  
205 205  **Web Interface**
... ... @@ -213,18 +213,90 @@
213 213  
214 214  The account details for Web Login are:
215 215  
216 -(% style="color:#4f81bd" %)**User Name: root**
245 +(% style="color:blue" %)**User Name: root**
217 217  
218 -(% style="color:#4f81bd" %)**Password:   dragino**
247 +(% style="color:blue" %)**Password:   dragino**
219 219  
220 220  [[image:image-20230106153501-1.png||height="367" width="894"]]
221 221  
222 222  
223 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
252 +== 2.2  Typical Network Setup ==
224 224  
225 -=== 2.2.1 Select your area frequency ===
254 +=== 2.2.1  Overview ===
226 226  
227 227  
257 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
258 +
259 +* **WAN Port Internet Mode**
260 +
261 +* **WiFi Client Mode**
262 +
263 +* **Cellular Mode**
264 +
265 +=== 2.2.2  Use WAN port to access Internet ===
266 +
267 +
268 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
269 +
270 +
271 +[[image:image-20230411100633-2.png||height="501" width="935"]]
272 +
273 +
274 +=== 2.2.3  Access the Internet as a WiFi Client ===
275 +
276 +
277 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
278 +
279 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
280 +
281 +[[image:image-20230411095739-1.png||height="264" width="691"]]
282 +
283 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
284 +
285 +
286 +=== 2.2.4  Use built-in 4G modem for internet access ===
287 +
288 +
289 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
290 +
291 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
292 +
293 +
294 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
295 +
296 +First, install the Micro SIM card as below direction
297 +
298 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
299 +
300 +
301 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
302 +
303 +
304 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
305 +
306 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
307 +
308 +
309 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 +
311 +
312 +=== 2.2.5  Check Internet connection ===
313 +
314 +
315 +In the **home** page, we can check the Internet connection.
316 +
317 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
318 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
319 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
320 +
321 +[[image:image-20230411101534-3.png||height="544" width="942"]]
322 +
323 +
324 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
325 +
326 +=== 2.3.1 Select your area frequency ===
327 +
328 +
228 228  (((
229 229  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
230 230  
... ... @@ -234,7 +234,7 @@
234 234  [[image:image-20220622103332-9.png||height="485" width="938"]]
235 235  
236 236  
237 -=== 2.2.2 Get the only gateway EUI ===
338 +=== 2.3.2 Get the only gateway EUI ===
238 238  
239 239  
240 240  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -258,7 +258,7 @@
258 258  [[image:image-20220622103956-12.png]]
259 259  
260 260  
261 -== 2.2.3 Register the gateway to The Things Network ==
362 +=== 2.3.3 Register the gateway to The Things Network ===
262 262  
263 263  
264 264  **Login to The Things Network**
... ... @@ -279,7 +279,7 @@
279 279  == 3.1 Home ==
280 280  
281 281  
282 -//Shows the system running status~://
383 +Shows the system running status:
283 283  
284 284  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
285 285  
... ... @@ -289,15 +289,15 @@
289 289  === 3.2.1 LoRa ~-~-> LoRa ===
290 290  
291 291  
292 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
293 293  
294 -//Different LPS8v2 hardware versions can support different frequency ranges~://
395 +Different LPS8v2 hardware versions can support different frequency ranges:
295 295  
296 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
297 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
397 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
398 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
298 298  
299 299  (% class="wikigeneratedid" %)
300 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
401 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
301 301  
302 302  
303 303  (% class="wikigeneratedid" %)
... ... @@ -314,7 +314,7 @@
314 314  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
315 315  
316 316  
317 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
418 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
318 318  
319 319  
320 320  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -323,7 +323,7 @@
323 323  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
324 324  
325 325  
326 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
427 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
327 327  
328 328  
329 329  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -338,8 +338,9 @@
338 338  
339 339  === 3.4.1 Network ~-~-> WiFi ===
340 340  
442 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
341 341  
342 -[[image:image-20220616114756-4.png||height="251" width="669"]]
444 +[[image:image-20230619095946-1.png||height="332" width="827"]]
343 343  
344 344  
345 345  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -348,12 +348,34 @@
348 348  [[image:image-20220820134112-2.png||height="539" width="668"]]
349 349  
350 350  
351 -=== 3.4.3 Network ~-~-> Firewall ===
453 +=== 3.4.3 Network ~-~-> Network ===
352 352  
353 353  
354 -[[image:image-20220616115351-6.png||height="244" width="661"]]
456 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
355 355  
458 +[[image:image-20230214093657-2.png||height="333" width="858"]]
356 356  
460 +
461 +=== 3.4.4 Network ~-~-> Cellular ===
462 +
463 +
464 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
465 +
466 +(% style="color:red" %)**Note: APN cannot be empty.**
467 +
468 +[[image:image-20230228115126-1.png]]
469 +
470 +
471 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
472 +
473 +[[image:image-20230228115535-2.png||height="478" width="888"]]
474 +
475 +
476 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
477 +
478 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
479 +
480 +
357 357  == 3.5 System ==
358 358  
359 359  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -361,106 +361,134 @@
361 361  
362 362  Shows the system info:
363 363  
364 -[[image:image-20220917144512-5.png||height="618" width="853"]]
488 +[[image:image-20231031162854-1.png]]
365 365  
366 366  
367 367  === 3.5.2 System ~-~-> System General ===
368 368  
369 369  
370 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
494 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
371 371  
372 -[[image:image-20230107084158-1.png||height="543" width="844"]]
496 +In addition, Users can customize the FallBack IP address.
373 373  
498 +[[image:image-20230214094058-3.png]]
374 374  
500 +
375 375  === 3.5.3 System ~-~-> Backup/Restore ===
376 376  
377 377  
378 -[[image:image-20220917144725-6.png||height="208" width="869"]]
504 +[[image:image-20231031162927-2.png]]
379 379  
506 +=== 3.5.4 System ~-~-> Reboot / Reset ===
380 380  
381 -=== 3.5.4 System ~-~-> Remoteit ===
508 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
382 382  
510 +ETH LED will SOLID BULE Until the restore is finished.
383 383  
384 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
512 +When the gateway restores the factory settings is complete,
385 385  
514 +The WiFi configuration will enable WiFi Access Point by default.
386 386  
387 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
516 +The other configuration will be restored to the default configuration.
388 388  
389 -[[image:image-20221230092303-2.png]]
518 +[[image:image-20240203172853-1.png||height="365" width="901"]]
390 390  
391 391  
392 -= 4. Build-in Server =
521 +=== 3.5.5 System ~-~-> Remoteit ===
393 393  
394 394  
395 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
396 396  
397 397  
398 -[[image:image-20220820115644-1.png||height="217" width="778"]]
527 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
399 399  
529 +[[image:image-20221230092303-2.png]]
400 400  
401 -(% style="color:red" %)**Note:**
402 402  
403 - **Path**: System ~-~-> Built-in Server
532 +=== 3.5.6 System ~-~-> Package Management ===
404 404  
405 405  
406 -**Troubleshooting:**
535 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
407 407  
537 +[[image:image-20230214094316-4.png]]
408 408  
409 -**~ 1. URL does not jump properly**
410 410  
411 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
540 += 4. Build-in Server =
412 412  
413 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
414 414  
415 415  
416 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
545 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
417 417  
547 +[[image:image-20231106180816-4.png||height="416" width="896"]]
418 418  
419 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
549 +[[image:image-20231201165904-1.png||height="466" width="899"]]
420 420  
421 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
551 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
422 422  
553 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
423 423  
424 -Login account:
425 425  
426 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
427 427  
428 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
557 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
429 429  
430 430  
431 -[[image:image-20220725171719-1.png||height="570" width="769"]]
560 +[[image:image-20230616175558-7.png||height="362" width="894"]]
432 432  
562 +[[image:image-20231201170355-2.png||height="536" width="899"]]
433 433  
434 -== 4.2 Application Server ~-~- Node-Red ==
564 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
435 435  
436 436  
437 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
438 438  
568 +== **3). Troubleshooting:** ==
439 439  
440 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
441 441  
571 +* (((
572 +=== ** If the URL does not jump properly.** ===
573 +)))
442 442  
443 -[[image:image-20220725172124-3.png||height="610" width="843"]]
575 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
444 444  
577 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
445 445  
446 446  
447 -=== **Using Node-Red, InfluxDB and Grafana** ===
580 +* (((
581 +=== ** How to install InfluxDB, Garfana.** ===
582 +)))
448 448  
449 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
584 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
450 450  
451 451  
452 -the users can refer to this link to install them.
587 +* (((
588 +=== ** How to upgrade the gateway node.js to the latest version.** ===
589 +)))
453 453  
454 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
591 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
455 455  
456 456  
457 -== 4.3 How to disable the built-in server ==
594 +* (((
595 +=== ** How to batch register device on the built-in Chirpstack network server** ===
596 +)))
458 458  
598 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
459 459  
460 -Use the following commands to start and stop the TTNv3 service:
461 461  
601 +* (((
602 +=== ** Why my gateway is not Chirpstack?** ===
603 +)))
604 +
605 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
606 +
607 +
608 +* (((
609 +=== ** How to disable the built-in server** ===
610 +)))
611 +
462 462  (% class="box infomessage" %)
463 463  (((
614 +Use the following commands to start and stop the TTNv3 service:**     **
615 +
464 464  **# start**
465 465  systemctl start ttnstack
466 466  
... ... @@ -474,10 +474,10 @@
474 474  systemctl disable ttnstack
475 475  )))
476 476  
477 -Use the following commands to start and stop the Node-Red service:
478 -
479 479  (% class="box infomessage" %)
480 480  (((
631 +Use the following commands to start and stop the Node-Red service:
632 +
481 481  **# start**
482 482  systemctl start nodered
483 483  
... ... @@ -492,20 +492,47 @@
492 492  )))
493 493  
494 494  
495 -== 4.4 How to use ChirpStack on LPS8-V2 ==
647 +* (((
648 +=== ** How to choose the Chirpstack server frequency SubBand** ===
649 +)))
496 496  
651 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
497 497  
498 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
653 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
499 499  
500 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack]]
655 +[[image:image-20230602140406-3.png||height="480" width="918"]]
501 501  
502 502  
503 -= 5. How users can access LPS8-V2 using serial USB =
658 +When the configuration is complete, click** "Save&Apply"**.
504 504  
505 505  
506 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
661 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
507 507  
663 +[[image:image-20230602143122-4.png||height="511" width="983"]]
508 508  
665 +
666 += 5. Watch Dog =
667 +
668 +
669 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
670 +
671 +The uses can be via the below method to enable Watch Dog:
672 +
673 +
674 +(% class="box infomessage" %)
675 +(((
676 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
677 +)))
678 +
679 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
680 +
681 +
682 +
683 += 6. How users can access LPS8-V2 using serial USB =
684 +
685 +
686 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
687 +
509 509  Port 1 of the UART on the LPS8-V2 is GND
510 510  
511 511  (% class="box infomessage" %)
... ... @@ -517,12 +517,10 @@
517 517  **GND <~-~--> GND (Black line)**
518 518  )))
519 519  
520 -
521 521  **LPS8v2 UART connection photo**
522 522  
523 -[[image:image-20220804163015-1.png||height="621" width="466"]]
701 +[[image:image-20230421094319-2.png||height="351" width="392"]]
524 524  
525 -
526 526  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
527 527  
528 528  
... ... @@ -532,114 +532,219 @@
532 532  [[image:image-20220804164747-2.png||height="622" width="594"]]
533 533  
534 534  
535 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
712 += 7. OTA System Update =
536 536  
537 537  
538 -== **Step 1: Configure Frequency Band** ==
715 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
539 539  
540 540  
541 -//Each country has a requirement for frequency region. Choose the right one for your area.//
718 +== 7.1 Auto-update method ==
542 542  
543 -[[image:image-20220905164308-1.png]]
544 544  
721 +The default, each gateway will enable the auto-update function.
545 545  
723 +this function will be triggered every boot and every midnight.
546 546  
547 -== **Step 2: Configure the forward address** ==
548 548  
726 +Users can enable/disable it via Web Page
549 549  
550 -**Select one of the servers to configure.**
728 +[[image:image-20230607094447-2.png]]
551 551  
552 -**For example:**
553 553  
554 -[[image:image-20220905164847-2.png]]
731 +== 7.2 Manual upgrade method ==
555 555  
556 556  
734 +1). Using the Linux command to upgrade the system
557 557  
558 -== **Step 3: Download and Install the Helium-gateway-rs** ==
559 559  
737 +(% class="box infomessage" %)
738 +(((
739 +**apt update && apt install *dragino***
740 +)))
560 560  
561 -**Access the gateway CLI via SSH.**
562 562  
563 -[[image:image-20220905165222-3.png]]
743 +2). Upgrade the system via the Web page button of "Manual Update"
564 564  
565 565  
566 -**Download gateway-rs.**
746 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
567 567  
568 -[[image:image-20220905165715-5.png]]
748 +[[image:image-20230607093849-1.png]]
569 569  
750 +
751 +
752 += 8. FAQ =
753 +
754 +== 8.1 How to change Hostname ==
755 +
756 +
757 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
758 +
570 570  (% class="box infomessage" %)
571 571  (((
572 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
761 +hostnamectl set-hostname dragino-123456
573 573  )))
574 574  
764 +[[image:image-20230517102429-1.png]]
575 575  
576 -**Install gateway-rs.**
766 +After the configuration is complete, run "reboot" to restart the gateway.
577 577  
578 -[[image:image-20220905165917-7.png]]
579 579  
769 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
770 +
771 +
772 +Migrate guide:
773 +
774 +To stabilize the completion of the migration, The users can migrate in one of the following ways
775 +
776 +**Method 1. Using the Linux shell, **
777 +
778 +**Method 2. Flash a new image with the Chirpstack**
779 +
780 +
781 +
782 +=== Method 1: Using the Linux shell ===
783 +
580 580  (% class="box infomessage" %)
581 581  (((
582 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
786 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
583 583  )))
584 584  
585 585  
586 -**Modify configuration.**
587 587  
791 +=== Method 2: Flash a new image ===
588 588  
589 -[[image:image-20220905173847-12.png]]
793 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
590 590  
591 591  
796 +
797 +== 8.3 How to reduce the 4g data consumed ==
798 +
799 +
800 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
801 +
802 +[[image:image-20230719100239-1.png||height="724" width="994"]]
803 +
804 +
805 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
806 +
807 +[[image:image-20230719100332-2.png]]
808 +
809 +
810 +3. Disable the auto-update:
811 +
812 +[[image:image-20230719100419-3.png||height="458" width="995"]]
813 +
814 +
815 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
816 +
817 +
592 592  (% class="box infomessage" %)
593 593  (((
594 -**region=<Enter regional parameters> \
595 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
596 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
820 +apt update && apt install helium-gateway
597 597  )))
598 598  
599 599  
600 -**Restart the helium_gateway**
824 +== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
601 601  
602 -[[image:image-20220905170920-9.png]]
603 603  
827 +By default, the LPS8v2's built-in server is ChirpStack v4,
604 604  
829 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
830 +
831 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
832 +
833 +
834 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
835 +
836 +
837 +== 8.6 How do I view gateway logs ==
838 +
839 +=== 8.6.1 LoRaWAN Log: ===
840 +
841 +==== Semtech UDP Log : ====
842 +
843 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
844 +
845 +[[image:image-20231017112115-2.png||height="611" width="821"]]
846 +
847 +
848 +==== Station Log: ====
849 +
850 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
851 +
852 +[[image:image-20231017111606-1.png||height="622" width="821"]]
853 +
854 +
855 +=== 8.6.2  4G Log ===
856 +
857 +The user needs to access the Linux console of the gateway and enter the following command:
858 +
605 605  (% class="box infomessage" %)
606 606  (((
607 -**systemctl restart helium_gateway**
861 +cat /var/log/qmilog.txt
608 608  )))
609 609  
864 +[[image:image-20231017114417-3.png||height="543" width="679"]]
610 610  
611 -**Check the helium_gateway Log：**
612 612  
613 -[[image:image-20220905173952-13.png]]
867 +=== 8.6.3 Dmesg Log ===
614 614  
869 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
615 615  
871 +[[image:image-20231017115330-5.png||height="565" width="740"]]
872 +
873 +
874 +=== 8.6.4 Record Log ===
875 +
876 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
877 +
878 +[[image:image-20231017115124-4.png||height="215" width="880"]]
879 +
880 +
881 +=== 8.6.5 View gateway logs via Linux Command ===
882 +
883 +**Semtech UDP Log :**
884 +
616 616  (% class="box infomessage" %)
617 617  (((
618 -**journalctl -u helium_gateway -f**
887 +**journalctl -u draginofwd -f**
619 619  )))
620 620  
890 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
621 621  
622 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
623 623  
624 -where the helium gateway log is shown:
893 +**Station Log:**
625 625  
626 -[[image:image-20220905174534-14.png]]
895 +(% class="box infomessage" %)
896 +(((
897 +**tail -f /var/log/station.log **
898 +)))
627 627  
900 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
628 628  
629 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
630 630  
903 +**Dmesg Log:**
631 631  
632 -= 7. OTA System Update =
905 +(% class="box infomessage" %)
906 +(((
907 +**dmesg**
908 +)))
633 633  
910 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
634 634  
635 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
636 636  
913 +== 8.7 DIN Mount Reference: ==
637 637  
638 -= 8. Trouble Shooting =
915 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
639 639  
640 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
917 +[[image:image-20240318095617-2.png]]
641 641  
642 642  
920 += 9. Trouble Shooting =
921 +
922 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
923 +
924 +
643 643  [[image:image-20220920135918-1.png]]
644 644  
645 645  
... ... @@ -655,28 +655,96 @@
655 655  [[image:image-20220920141936-2.png]]
656 656  
657 657  
658 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
940 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
659 659  
660 660  
943 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
944 +
945 +[[image:image-20230508171607-1.png]]
946 +
947 +
948 +== 9.3  Fallback IP does not work, how can users check ==
949 +
950 +
951 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
952 +
953 +
954 +**1.Check whether the configuration is correct**
955 +
956 +Run the CMD command to ipconfig and ping 172.31.255.254.
957 +
958 +If this fails, the user needs to reconfigure.
959 +
960 +[[image:image-20230413170224-3.png||height="433" width="707"]]
961 +
962 +[[image:image-20230413170246-4.png]]
963 +
964 +
965 +**2. Check whether the firewall is disabled**
966 +
967 +If the firewall is not down, this will affect access to the gateway.
968 +
969 +
970 +== 9.4  Click "Manual_Update", why there is no response? ==
971 +
972 +
973 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
974 +
975 +
976 +[[image:image-20230527090555-3.png||height="660" width="832"]]
977 +
978 +
979 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
980 +
981 +
982 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
983 +
984 +
985 +(% class="box infomessage" %)
661 661  (((
662 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
987 +apt update && apt install *dragino*
988 +
989 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
663 663  )))
664 664  
992 +
993 +== 9.6  How to reset the built-in server ==
994 +
995 +
996 +**1) Build-in The Things Network**
997 +
998 +Refer to this link to delete the Built-in server's device.
999 +
1000 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1001 +
1002 +
1003 +**2) Build-in Chirpstack**
1004 +
1005 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1006 +
1007 +[[image:image-20231106180846-5.png||height="310" width="668"]]
1008 +
1009 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1010 +
1011 +
665 665  (((
666 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1013 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1014 +)))
667 667  
1016 +(((
1017 +With your question as detailed as possible. We will reply and help you in the shortest.
668 668  
669 -= 10. Reference =
670 670  
1020 += 11. Reference =
671 671  
1022 +
672 672  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
673 673  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
674 674  
675 -
676 676  
677 677  )))
678 678  
679 -= 11. Order Info =
1029 += 12. Order Info =
680 680  
681 681  
682 682  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -684,23 +684,31 @@
684 684  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
685 685  
686 686  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1037 +
687 687  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1039 +
688 688  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1041 +
689 689  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1043 +
690 690  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1045 +
691 691  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
692 692  
693 693  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
694 694  
695 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
696 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
697 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
698 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1050 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
699 699  
1052 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1053 +
1054 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1055 +
1056 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1057 +
700 700  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
701 701  
702 702  
703 -= 12. Manufacturer Info =
1061 += 13. Manufacturer Info =
704 704  
705 705  
706 706  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -710,7 +710,7 @@
710 710  LongCheng Street, LongGang District ; Shenzhen 518116,China
711 711  
712 712  
713 -= 13. FCC Warning =
1071 += 14. FCC Warning =
714 714  
715 715  
716 716  (((
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0