Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 141.1 >
edited by Kilight Cao
on 2023/01/13 14:40
To version < 236.3 >
edited by Xiaoling
on 2023/07/21 16:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,13 +57,17 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
69 +
70 +
67 67  == 1.3 Features ==
68 68  
69 69  
... ... @@ -79,35 +79,33 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
86 86  
87 87  
91 +== 1.4 LED Indicators ==
88 88  
89 -== 1.5 LED Indicators ==
90 90  
91 -
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
97 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
99 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
101 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
109 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 -== 1.6 Button Intruction ==
112 +== 1.5 Button Intruction ==
111 111  
112 112  
113 113  LPS8-V2 has a black toggle button, which is:
... ... @@ -115,12 +115,12 @@
115 115  
116 116  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
119 119  
120 120  
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
123 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
125 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
124 124  
125 125  
126 126  = 2. Quick Start =
... ... @@ -131,14 +131,29 @@
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
136 +== 2.1 Access and Configure LPS8-V2 ==
135 135  
136 -== 2.1.1 connect the network ==
138 +=== 2.1.1 Find IP address of LPS8-V2 ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
144 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +
146 +(% style="background-color:yellow" %)**dragino+dragino**
147 +
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +
155 +
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 +
158 +
142 142  (((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
... ... @@ -150,9 +150,10 @@
150 150  [[image:image-20220622100129-1.png||height="332" width="1263"]]
151 151  
152 152  
153 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
154 154  
171 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
155 155  
173 +
156 156  [[image:image-20230107084650-2.png||height="310" width="839"]]
157 157  
158 158  
... ... @@ -162,20 +162,28 @@
162 162  
163 163  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
164 164  
183 +
184 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
185 +
186 +
165 165  As in the below photo:
166 166  
167 -[[image:image-20230107085904-4.png||height="443" width="361"]]
189 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
168 168  
169 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
170 170  
192 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
171 171  
172 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
173 173  
174 174  
197 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
175 175  
176 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
199 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
177 177  
178 178  
202 +
203 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 +
179 179  [[image:image-20220622100542-2.png||height="369" width="1256"]]
180 180  
181 181  
... ... @@ -195,7 +195,7 @@
195 195  [[image:image-20220622102901-8.png||height="476" width="938"]]
196 196  
197 197  
198 -== 2.1.2 Access Configure Web UI ==
224 +=== 2.1.2 Access Configure Web UI ===
199 199  
200 200  
201 201  **Web Interface**
... ... @@ -209,18 +209,90 @@
209 209  
210 210  The account details for Web Login are:
211 211  
212 -(% style="color:#4f81bd" %)**User Name: root**
238 +(% style="color:blue" %)**User Name: root**
213 213  
214 -(% style="color:#4f81bd" %)**Password:   dragino**
240 +(% style="color:blue" %)**Password:   dragino**
215 215  
216 216  [[image:image-20230106153501-1.png||height="367" width="894"]]
217 217  
218 218  
219 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
245 +== 2.2  Typical Network Setup ==
220 220  
221 -=== 2.2.1 Select your area frequency ===
247 +=== 2.2.1  Overview ===
222 222  
223 223  
250 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 +
252 +* **WAN Port Internet Mode**
253 +
254 +* **WiFi Client Mode**
255 +
256 +* **Cellular Mode**
257 +
258 +=== 2.2.2  Use WAN port to access Internet ===
259 +
260 +
261 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
262 +
263 +
264 +[[image:image-20230411100633-2.png||height="501" width="935"]]
265 +
266 +
267 +=== 2.2.3  Access the Internet as a WiFi Client ===
268 +
269 +
270 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 +
272 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
273 +
274 +[[image:image-20230411095739-1.png||height="264" width="691"]]
275 +
276 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
277 +
278 +
279 +=== 2.2.4  Use built-in 4G modem for internet access ===
280 +
281 +
282 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
283 +
284 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
285 +
286 +
287 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
288 +
289 +First, install the Micro SIM card as below direction
290 +
291 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
292 +
293 +
294 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
295 +
296 +
297 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
298 +
299 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
300 +
301 +
302 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
303 +
304 +
305 +=== 2.2.5  Check Internet connection ===
306 +
307 +
308 +In the **home** page, we can check the Internet connection.
309 +
310 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
311 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
312 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
313 +
314 +[[image:image-20230411101534-3.png||height="544" width="942"]]
315 +
316 +
317 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
318 +
319 +=== 2.3.1 Select your area frequency ===
320 +
321 +
224 224  (((
225 225  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
226 226  
... ... @@ -230,7 +230,7 @@
230 230  [[image:image-20220622103332-9.png||height="485" width="938"]]
231 231  
232 232  
233 -=== 2.2.2 Get the only gateway EUI ===
331 +=== 2.3.2 Get the only gateway EUI ===
234 234  
235 235  
236 236  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -254,7 +254,7 @@
254 254  [[image:image-20220622103956-12.png]]
255 255  
256 256  
257 -== 2.2.3 Register the gateway to The Things Network ==
355 +=== 2.3.3 Register the gateway to The Things Network ===
258 258  
259 259  
260 260  **Login to The Things Network**
... ... @@ -275,7 +275,7 @@
275 275  == 3.1 Home ==
276 276  
277 277  
278 -//Shows the system running status~://
376 +Shows the system running status:
279 279  
280 280  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
281 281  
... ... @@ -285,15 +285,15 @@
285 285  === 3.2.1 LoRa ~-~-> LoRa ===
286 286  
287 287  
288 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
386 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
289 289  
290 -//Different LPS8v2 hardware versions can support different frequency ranges~://
388 +Different LPS8v2 hardware versions can support different frequency ranges:
291 291  
292 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
293 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
390 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
391 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
294 294  
295 295  (% class="wikigeneratedid" %)
296 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
394 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
297 297  
298 298  
299 299  (% class="wikigeneratedid" %)
... ... @@ -310,7 +310,7 @@
310 310  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
311 311  
312 312  
313 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
411 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
314 314  
315 315  
316 316  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -319,7 +319,7 @@
319 319  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
320 320  
321 321  
322 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
420 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
323 323  
324 324  
325 325  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -334,8 +334,9 @@
334 334  
335 335  === 3.4.1 Network ~-~-> WiFi ===
336 336  
435 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
337 337  
338 -[[image:image-20220616114756-4.png||height="251" width="669"]]
437 +[[image:image-20230619095946-1.png||height="332" width="827"]]
339 339  
340 340  
341 341  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -344,12 +344,34 @@
344 344  [[image:image-20220820134112-2.png||height="539" width="668"]]
345 345  
346 346  
347 -=== 3.4.3 Network ~-~-> Firewall ===
446 +=== 3.4.3 Network ~-~-> Network ===
348 348  
349 349  
350 -[[image:image-20220616115351-6.png||height="244" width="661"]]
449 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
351 351  
451 +[[image:image-20230214093657-2.png||height="333" width="858"]]
352 352  
453 +
454 +=== 3.4.4 Network ~-~-> Cellular ===
455 +
456 +
457 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
458 +
459 +(% style="color:red" %)**Note: APN cannot be empty.**
460 +
461 +[[image:image-20230228115126-1.png]]
462 +
463 +
464 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
465 +
466 +[[image:image-20230228115535-2.png||height="478" width="888"]]
467 +
468 +
469 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
470 +
471 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
472 +
473 +
353 353  == 3.5 System ==
354 354  
355 355  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -363,11 +363,13 @@
363 363  === 3.5.2 System ~-~-> System General ===
364 364  
365 365  
366 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
487 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
367 367  
368 -[[image:image-20230107084158-1.png||height="543" width="844"]]
489 +In addition, Users can customize the FallBack IP address.
369 369  
491 +[[image:image-20230214094058-3.png]]
370 370  
493 +
371 371  === 3.5.3 System ~-~-> Backup/Restore ===
372 372  
373 373  
... ... @@ -377,7 +377,7 @@
377 377  === 3.5.4 System ~-~-> Remoteit ===
378 378  
379 379  
380 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
503 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
381 381  
382 382  
383 383  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -385,34 +385,46 @@
385 385  [[image:image-20221230092303-2.png]]
386 386  
387 387  
511 +=== 3.5.5 System ~-~-> Package Management ===
512 +
513 +
514 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
515 +
516 +[[image:image-20230214094316-4.png]]
517 +
518 +
388 388  = 4. Build-in Server =
389 389  
390 390  
391 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
522 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
392 392  
524 +[[image:image-20230616175617-8.png||height="390" width="894"]]
393 393  
394 -[[image:image-20220820115644-1.png||height="217" width="778"]]
526 +[[image:image-20230616175558-7.png||height="362" width="894"]]
395 395  
396 396  
529 +
397 397  (% style="color:red" %)**Note:**
398 398  
399 - **Path**: System ~-~-> Built-in Server
532 + **Path**: Server ~-~-> Network Server
400 400  
534 + Server ~-~-> Application Server
401 401  
536 +
402 402  **Troubleshooting:**
403 403  
404 404  
405 405  **~ 1. URL does not jump properly**
406 406  
407 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
542 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
408 408  
409 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
544 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
410 410  
411 411  
412 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
547 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
413 413  
414 414  
415 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
550 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
416 416  
417 417  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
418 418  
... ... @@ -419,14 +419,25 @@
419 419  
420 420  Login account:
421 421  
422 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
557 +**Username : ** (% style="background-color:yellow" %)**admin**
423 423  
424 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
559 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
425 425  
561 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
426 426  
427 -[[image:image-20220725171719-1.png||height="570" width="769"]]
428 428  
429 429  
565 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
566 +
567 +
568 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
569 +
570 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
571 +
572 +[[image:image-20230321092456-1.png]]
573 +
574 +
575 +
430 430  == 4.2 Application Server ~-~- Node-Red ==
431 431  
432 432  
... ... @@ -450,6 +450,16 @@
450 450  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
451 451  
452 452  
599 +=== **Upgrade the node.js** ===
600 +
601 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
602 +
603 +
604 +the users can refer to this link to upgrade them.
605 +
606 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
607 +
608 +
453 453  == 4.3 How to disable the built-in server ==
454 454  
455 455  
... ... @@ -491,17 +491,38 @@
491 491  == 4.4 How to use ChirpStack on LPS8-V2 ==
492 492  
493 493  
494 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
650 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
495 495  
496 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H3.A0HowtoinstallChirpStack]]
652 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
497 497  
498 498  
499 -= 5. How users can access LPS8-V2 using serial USB =
655 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
500 500  
501 501  
502 -(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
658 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
503 503  
660 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
504 504  
662 +[[image:image-20230602140406-3.png||height="480" width="918"]]
663 +
664 +
665 +When the configuration is complete, click** "Save&Apply"**.
666 +
667 +
668 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
669 +
670 +[[image:image-20230602143122-4.png||height="511" width="983"]]
671 +
672 +
673 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
674 +
675 +
676 +
677 += 6. How users can access LPS8-V2 using serial USB =
678 +
679 +
680 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
681 +
505 505  Port 1 of the UART on the LPS8-V2 is GND
506 506  
507 507  (% class="box infomessage" %)
... ... @@ -513,12 +513,10 @@
513 513  **GND <~-~--> GND (Black line)**
514 514  )))
515 515  
516 -
517 517  **LPS8v2 UART connection photo**
518 518  
519 -[[image:image-20220804163015-1.png||height="621" width="466"]]
695 +[[image:image-20230421094319-2.png||height="351" width="392"]]
520 520  
521 -
522 522  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
523 523  
524 524  
... ... @@ -528,114 +528,120 @@
528 528  [[image:image-20220804164747-2.png||height="622" width="594"]]
529 529  
530 530  
531 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
706 += 7. OTA System Update =
532 532  
533 533  
534 -== **Step 1: Configure Frequency Band** ==
709 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
535 535  
536 536  
537 -//Each country has a requirement for frequency region. Choose the right one for your area.//
712 +== 7.1 Auto-update method ==
538 538  
539 -[[image:image-20220905164308-1.png]]
540 540  
715 +The default, each gateway will enable the auto-update function.
541 541  
717 +this function will be triggered every boot and every midnight.
542 542  
543 -== **Step 2: Configure the forward address** ==
544 544  
720 +Users can enable/disable it via Web Page
545 545  
546 -**Select one of the servers to configure.**
722 +[[image:image-20230607094447-2.png]]
547 547  
548 -**For example:**
549 549  
550 -[[image:image-20220905164847-2.png]]
725 +== 7.2 Manual upgrade method ==
551 551  
552 552  
728 +1). Using the Linux command to upgrade the system
553 553  
554 -== **Step 3: Download and Install the Helium-gateway-rs** ==
555 555  
731 +(% class="box infomessage" %)
732 +(((
733 +**apt update && apt install *dragino***
734 +)))
556 556  
557 -**Access the gateway CLI via SSH.**
558 558  
559 -[[image:image-20220905165222-3.png]]
737 +2). Upgrade the system via the Web page button of "Manual Update"
560 560  
561 561  
562 -**Download gateway-rs.**
740 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
563 563  
564 -[[image:image-20220905165715-5.png]]
742 +[[image:image-20230607093849-1.png]]
565 565  
566 -(% class="box infomessage" %)
567 -(((
568 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
569 -)))
570 570  
571 571  
572 -**Install gateway-rs.**
746 += 8. FAQ =
573 573  
574 -[[image:image-20220905165917-7.png]]
748 +== 8.1 How to change Hostname ==
575 575  
750 +
751 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
752 +
576 576  (% class="box infomessage" %)
577 577  (((
578 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
755 +hostnamectl set-hostname dragino-123456
579 579  )))
580 580  
758 +[[image:image-20230517102429-1.png]]
581 581  
582 -**Modify configuration.**
760 +After the configuration is complete, run "reboot" to restart the gateway.
583 583  
584 584  
585 -[[image:image-20220905173847-12.png]]
763 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
586 586  
587 587  
588 -(% class="box infomessage" %)
589 -(((
590 -**region=<Enter regional parameters> \
591 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
592 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
593 -)))
766 +Migrate guide:
594 594  
768 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
595 595  
596 -**Restart the helium_gateway**
770 +**2. On the Server ~-~-> Network Server interface, click "Management"**
597 597  
598 -[[image:image-20220905170920-9.png]]
772 +[[image:image-20230616162454-1.png]]
599 599  
600 600  
601 -(% class="box infomessage" %)
602 -(((
603 -**systemctl restart helium_gateway**
604 -)))
775 +**3. Click "Migrate-Chirpstack"**
605 605  
777 +[[image:image-20230616162742-2.png]]
606 606  
607 -**Check the helium_gateway Log：**
608 608  
609 -[[image:image-20220905173952-13.png]]
780 +**4. Strat Install **
610 610  
611 611  
612 -(% class="box infomessage" %)
613 -(((
614 -**journalctl -u helium_gateway -f**
615 -)))
783 +Click start Install and wait until the migration succeeds
616 616  
785 +[[image:image-20230616162934-3.png]]
617 617  
618 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
619 619  
620 -where the helium gateway log is shown:
788 +**5.Migration complete check result**
621 621  
622 -[[image:image-20220905174534-14.png]]
790 +[[image:image-20230616174526-4.png||height="706" width="983"]]
623 623  
624 624  
625 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
793 +[[image:image-20230616180004-9.png]]
626 626  
627 627  
628 -= 7. OTA System Update =
796 +== 8.3 How to reduce the 4g data consumed ==
629 629  
798 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
630 630  
631 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
632 632  
801 +[[image:image-20230719100239-1.png||height="724" width="994"]]
633 633  
634 -= 8. Trouble Shooting =
635 635  
636 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
804 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
637 637  
806 +[[image:image-20230719100332-2.png]]
638 638  
808 +3. Disable the auto-update:
809 +
810 +[[image:image-20230719100419-3.png||height="458" width="995"]]
811 +
812 +
813 +
814 +
815 += 9. Trouble Shooting =
816 +
817 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
818 +
819 +
639 639  [[image:image-20220920135918-1.png]]
640 640  
641 641  
... ... @@ -651,27 +651,81 @@
651 651  [[image:image-20220920141936-2.png]]
652 652  
653 653  
654 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
835 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
655 655  
656 656  
838 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
839 +
840 +[[image:image-20230508171607-1.png]]
841 +
842 +
843 +== 9.3  Fallback IP does not work, how can users check ==
844 +
845 +
846 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
847 +
848 +
849 +**1.Check whether the configuration is correct**
850 +
851 +Run the CMD command to ipconfig and ping 172.31.255.254.
852 +
853 +If this fails, the user needs to reconfigure.
854 +
855 +[[image:image-20230413170224-3.png||height="433" width="707"]]
856 +
857 +[[image:image-20230413170246-4.png]]
858 +
859 +
860 +**2. Check whether the firewall is disabled**
861 +
862 +If the firewall is not down, this will affect access to the gateway.
863 +
864 +
865 +== 9.4  Click "Manual_Update", why there is no response? ==
866 +
867 +
868 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
869 +
870 +
871 +[[image:image-20230527090555-3.png||height="660" width="832"]]
872 +
873 +
874 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
875 +
876 +
877 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
878 +
879 +
880 +(% class="box infomessage" %)
657 657  (((
658 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
882 +apt update && apt install dragino-fallback
883 +
884 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
659 659  )))
660 660  
887 +
888 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
889 +
890 +
661 661  (((
662 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
892 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
893 +)))
663 663  
895 +(((
896 +With your question as detailed as possible. We will reply and help you in the shortest.
664 664  
665 -= 10. Reference =
666 666  
899 += 11. Reference =
667 667  
901 +
668 668  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
669 669  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
670 670  
905 +
671 671  
672 672  )))
673 673  
674 -= 11. Order Info =
909 += 12. Order Info =
675 675  
676 676  
677 677  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -679,23 +679,31 @@
679 679  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
680 680  
681 681  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
917 +
682 682  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
919 +
683 683  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
921 +
684 684  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
923 +
685 685  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
925 +
686 686  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
687 687  
688 688  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
689 689  
690 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
691 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
692 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
693 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
930 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
694 694  
932 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
933 +
934 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
935 +
936 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
937 +
695 695  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
696 696  
697 697  
698 -= 12. Manufacturer Info =
941 += 13. Manufacturer Info =
699 699  
700 700  
701 701  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -705,7 +705,7 @@
705 705  LongCheng Street, LongGang District ; Shenzhen 518116,China
706 706  
707 707  
708 -= 13. FCC Warning =
951 += 14. FCC Warning =
709 709  
710 710  
711 711  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0