Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 138.1 >
edited by Kilight Cao
on 2023/01/13 11:41
To version < 69.4 >
edited by Xiaoling
on 2022/07/28 17:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,39 +13,27 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 -(((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 -)))
28 28  
29 -(((
30 30  The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 -)))
32 32  
33 -(((
34 34  LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 -)))
36 36  
37 -(((
38 38  Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 -)))
40 40  
41 -(((
42 42  LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 -)))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
34 +== **1.2 Specifications** ==
48 48  
36 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -64,7 +64,7 @@
64 64  * Storage Temperature: -20 ~~ 65°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 -== 1.3 Features ==
55 +== **1.3 Features** ==
68 68  
69 69  
70 70  * Open Source Debian system
... ... @@ -82,11 +82,11 @@
82 82  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 83  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
73 +== **1.4 Block Diagram** ==
86 86  
87 87  
88 88  
89 -== 1.5 LED Indicators ==
77 +== **1.5 LED Indicators** ==
90 90  
91 91  
92 92  LPS8-V2 has totally four LEDs, They are:
... ... @@ -94,91 +94,75 @@
94 94  
95 95  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
86 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
89 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
91 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
93 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
108 108  
95 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 109  
110 -== 1.6 Button Intruction ==
111 111  
98 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
112 112  
113 -LPS8-V2 has a black toggle button, which is:
114 114  
115 115  
116 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
102 += **2. Quick Start** =
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
119 119  
120 -
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
122 -
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
124 -
125 -
126 -= 2. Quick Start =
127 -
128 -
129 129  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
130 130  
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
135 135  
136 -== 2.1.1 connect the network ==
111 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
137 137  
138 138  
114 +== **2.1.1 connect the network.** ==
115 +
116 +=== ===
117 +
139 139  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
140 140  
141 141  
142 -(((
143 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 -)))
121 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 145  
146 -(((
147 147  You can also use this IP to connect.
148 -)))
149 149  
150 150  [[image:image-20220622100129-1.png||height="332" width="1263"]]
151 151  
152 152  
153 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
154 154  
129 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
155 155  
156 -[[image:image-20230107084650-2.png||height="310" width="839"]]
157 157  
132 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
158 158  
159 -(% style="color:blue" %)**Steps to connect via fallback IP:**
160 160  
161 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
135 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
162 162  
163 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
164 164  
165 -As in the below photo:
166 166  
167 -[[image:image-20230107085904-4.png||height="443" width="361"]]
139 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
168 168  
169 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
141 +1. Connect PC's Ethernet port to LPS8-V2's WAN port
170 170  
143 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
171 171  
172 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
145 +[[image:image-20220622101433-4.png]]
173 173  
174 174  
148 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
175 175  
176 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
177 177  
151 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
178 178  
179 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
180 180  
181 -
182 182  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
183 183  
184 184  
... ... @@ -192,53 +192,30 @@
192 192  [[image:image-20220622102847-7.png]]
193 193  
194 194  
195 -[[image:image-20220622102901-8.png||height="476" width="938"]]
167 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
196 196  
197 197  
198 -== 2.1.2 Access Configure Web UI ==
199 199  
171 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
200 200  
201 -**Web Interface**
202 202  
203 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
174 +=== **2.2.1 Select your area frequency** ===
204 204  
205 205  
206 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
207 -
208 -You will see the login interface of LPS8-V2 as shown below.
209 -
210 -The account details for Web Login are:
211 -
212 -(% style="color:#4f81bd" %)**User Name: root**
213 -
214 -(% style="color:#4f81bd" %)**Password:   dragino**
215 -
216 -[[image:image-20230106153501-1.png||height="367" width="894"]]
217 -
218 -
219 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
220 -
221 -=== 2.2.1 Select your area frequency ===
222 -
223 -
224 -(((
225 225  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
226 226  
227 -
228 -)))
179 +[[image:image-20220622103332-9.png]]
229 229  
230 -[[image:image-20220622103332-9.png||height="485" width="938"]]
231 231  
232 232  
233 -=== 2.2.2 Get the only gateway EUI ===
183 +=== **2.2.2 Get the only gateway EUI** ===
234 234  
235 235  
236 236  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
237 237  
188 +[[image:image-20220622103355-10.png]]
238 238  
239 -[[image:image-20220622103355-10.png||height="698" width="949"]]
240 240  
241 -
242 242  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
243 243  
244 244  
... ... @@ -254,6 +254,7 @@
254 254  [[image:image-20220622103956-12.png]]
255 255  
256 256  
206 +
257 257  == 2.2.3 Register the gateway to The Things Network ==
258 258  
259 259  
... ... @@ -270,19 +270,20 @@
270 270  **Get it online**
271 271  
272 272  
273 -= 3. Web Configure Pages =
274 274  
275 -== 3.1 Home ==
224 += **3. Web Configure Pages** =
276 276  
277 277  
227 +== **3.1 Home** ==
228 +
229 +
278 278  //Shows the system running status~://
279 279  
280 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
281 281  
233 +== **3.2 LoRa Settings** ==
282 282  
283 -== 3.2 LoRa Settings ==
284 284  
285 -=== 3.2.1 LoRa ~-~-> LoRa ===
236 +=== **3.2.1 LoRa ~-~-> LoRa** ===
286 286  
287 287  
288 288  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -289,368 +289,143 @@
289 289  
290 290  //Different LPS8v2 hardware versions can support different frequency ranges~://
291 291  
292 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
243 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
293 293  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
294 294  
295 295  (% class="wikigeneratedid" %)
296 296  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
297 297  
298 -
299 299  (% class="wikigeneratedid" %)
300 300  [[image:image-20220616110739-1.png||height="372" width="682"]]
301 301  
302 302  
303 303  (((
304 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
254 +(% style="color:red" %)//**Note ***: See this instruction for how to customize the frequency band: //(%%)//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//
305 305  )))
306 306  
307 307  
308 -== 3.3 LoRaWAN Settings ==
309 309  
310 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
259 +== **3.3 LoRaWAN Settings** ==
311 311  
312 312  
313 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
262 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
314 314  
315 315  
265 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
266 +
316 316  [[image:image-20220616111932-2.png||height="516" width="672"]]
317 317  
318 318  
319 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
270 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
320 320  
321 321  
322 322  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
323 323  
324 -
325 325  [[image:image-20220616113246-3.png||height="396" width="672"]]
326 326  
327 327  
328 -(((
329 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
330 -)))
278 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
331 331  
332 332  
333 -== 3.4 Network Settings ==
281 +== **3.4 Network Settings** ==
334 334  
335 -=== 3.4.1 Network ~-~-> WiFi ===
336 336  
284 +=== **3.4.1 Network ~-~-> WiFi** ===
337 337  
286 +
338 338  [[image:image-20220616114756-4.png||height="251" width="669"]]
339 339  
340 340  
341 -=== 3.4.2 Network ~-~-> System Status ===
290 +=== **3.4.2 Network ~-~-> System Status** ===
342 342  
343 343  
344 -[[image:image-20220820134112-2.png||height="539" width="668"]]
293 +[[image:image-20220616115229-5.png||height="548" width="665"]]
345 345  
346 346  
347 -=== 3.4.3 Network ~-~-> Firewall ===
296 +=== **3.4.3 Network ~-~-> Firewall** ===
348 348  
349 349  
350 350  [[image:image-20220616115351-6.png||height="244" width="661"]]
351 351  
352 352  
353 -== 3.5 System ==
302 +== **3.5 System** ==
354 354  
355 -=== 3.5.1 System ~-~-> System Overview ===
356 356  
305 +=== **3.5.1  System ~-~-> System Overview** ===
357 357  
307 +
358 358  Shows the system info:
359 359  
360 -[[image:image-20220917144512-5.png||height="618" width="853"]]
361 361  
311 +=== **3.5.2 System ~-~-> Backup/Restore** ===
362 362  
363 -=== 3.5.2 System ~-~-> System General ===
364 364  
314 +[[image:image-20220616115808-7.png||height="194" width="649"]]
365 365  
366 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
367 367  
368 -[[image:image-20230107084158-1.png||height="543" width="844"]]
369 369  
318 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
370 370  
371 -=== 3.5.3 System ~-~-> Backup/Restore ===
372 372  
321 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: **The Things Network - Stack (Open Source 3.19 Version).**
373 373  
374 -[[image:image-20220917144725-6.png||height="208" width="869"]]
323 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
375 375  
376 376  
377 -=== 3.5.4 System ~-~-> Remoteit ===
326 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
378 378  
379 379  
380 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
381 -
382 -
383 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
384 -
385 -[[image:image-20221230092303-2.png]]
386 -
387 -
388 -= 4. Build-in Server =
389 -
390 -
391 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
392 -
393 -
394 -[[image:image-20220820115644-1.png||height="217" width="778"]]
395 -
396 -
397 -(% style="color:red" %)**Note:**
398 -
399 - **Path**: System ~-~-> Built-in Server
400 -
401 -
402 -**Troubleshooting:**
403 -
404 -
405 -**~ 1. URL does not jump properly**
406 -
407 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
408 -
409 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
410 -
411 -
412 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
413 -
414 -
415 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
416 -
417 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
418 -
419 -
420 420  Login account:
421 421  
422 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
331 +**User ID: ** (% class="mark" %)admin
423 423  
424 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
333 +**Password: ** (% class="mark" %)dragino
425 425  
426 426  
427 427  [[image:image-20220725171719-1.png||height="570" width="769"]]
428 428  
338 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
339 + You can complete the installation manually with the following command.(%%)**
429 429  
430 -== 4.2 Application Server ~-~- Node-Red ==
431 431  
432 -
433 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
434 -
435 -
436 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
437 -
438 -
439 -[[image:image-20220725172124-3.png||height="610" width="843"]]
440 -
441 -
442 -
443 -=== **Using Node-Red, InfluxDB and Grafana** ===
444 -
445 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
446 -
447 -
448 -the users can refer to this link to install them.
449 -
450 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
451 -
452 -== 4.3 How to disable the built-in server ==
453 -
454 -
455 -Use the following commands to start and stop the TTNv3 service:
456 -
457 457  (% class="box infomessage" %)
458 458  (((
459 -**# start**
460 -systemctl start ttnstack
344 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
461 461  
462 -**# stop**
463 -systemctl stop ttnstack
464 -
465 -**# enable**
466 -systemctl enable ttnstack
467 -
468 -**#disable**
469 -systemctl disable ttnstack
346 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
470 470  )))
471 471  
472 -Use the following commands to start and stop the Node-Red service:
473 473  
474 -(% class="box infomessage" %)
475 -(((
476 -**# start**
477 -systemctl start nodered
350 += **5. Build-in Application Server ~-~- Node-Red** =
478 478  
479 -**# stop**
480 -systemctl stop nodered
481 481  
482 -**# enable**
483 -systemctl enable nodered
353 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: **Node-Red.**
484 484  
485 -**#disable**
486 -systemctl disable nodered
487 -)))
355 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% class="mark" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
488 488  
489 -== 4.4 How to use ChirpStack on LPS8V2 ==
490 490  
358 +Such as (% class="mark" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
491 491  
492 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
360 +[[image:image-20220725172124-3.png||height="610" width="843"]]
493 493  
494 494  
495 -= 5. How users can access LPS8v2 using serial USB =
496 496  
364 +**Note:  (% class="mark" %)A portion of the sample devices that were not installed with Node-Red.
365 + You can complete the installation manually with the following command.(%%)**
497 497  
498 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
499 499  
500 -
501 -Port 1 of the UART on the LPS8v2 is GND
502 -
503 503  (% class="box infomessage" %)
504 504  (((
505 -**TXD  <~-~--> UART RXD (Gray line)**
506 -
507 -**RXD  <~-~--> UART TXD (White line)**
508 -
509 -**GND <~-~--> GND (Black line)**
370 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
371 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
510 510  )))
511 511  
374 +[[image:image-20220728102000-1.png]]
512 512  
513 -**LPS8v2 UART connection photo**
514 514  
515 -[[image:image-20220804163015-1.png||height="621" width="466"]]
377 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
516 516  
517 -
518 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
519 -
520 -
521 -[[image:image-20220804164928-3.png||height="320" width="332"]]
522 -
523 -
524 -[[image:image-20220804164747-2.png||height="622" width="594"]]
525 -
526 -
527 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
528 -
529 -
530 -== **Step 1: Configure Frequency Band** ==
531 -
532 -
533 -//Each country has a requirement for frequency region. Choose the right one for your area.//
534 -
535 -[[image:image-20220905164308-1.png]]
536 -
537 -
538 -
539 -== **Step 2: Configure the forward address** ==
540 -
541 -
542 -**Select one of the servers to configure.**
543 -
544 -**For example:**
545 -
546 -[[image:image-20220905164847-2.png]]
547 -
548 -
549 -
550 -== **Step 3: Download and Install the Helium-gateway-rs** ==
551 -
552 -
553 -**Access the gateway CLI via SSH.**
554 -
555 -[[image:image-20220905165222-3.png]]
556 -
557 -
558 -**Download gateway-rs.**
559 -
560 -[[image:image-20220905165715-5.png]]
561 -
562 -(% class="box infomessage" %)
563 563  (((
564 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
565 -)))
566 -
567 -
568 -**Install gateway-rs.**
569 -
570 -[[image:image-20220905165917-7.png]]
571 -
572 -(% class="box infomessage" %)
573 -(((
574 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
575 -)))
576 -
577 -
578 -**Modify configuration.**
579 -
580 -
581 -[[image:image-20220905173847-12.png]]
582 -
583 -
584 -(% class="box infomessage" %)
585 -(((
586 -**region=<Enter regional parameters> \
587 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
588 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
589 -)))
590 -
591 -
592 -**Restart the helium_gateway**
593 -
594 -[[image:image-20220905170920-9.png]]
595 -
596 -
597 -(% class="box infomessage" %)
598 -(((
599 -**systemctl restart helium_gateway**
600 -)))
601 -
602 -
603 -**Check the helium_gateway Log：**
604 -
605 -[[image:image-20220905173952-13.png]]
606 -
607 -
608 -(% class="box infomessage" %)
609 -(((
610 -**journalctl -u helium_gateway -f**
611 -)))
612 -
613 -
614 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
615 -
616 -where the helium gateway log is shown:
617 -
618 -[[image:image-20220905174534-14.png]]
619 -
620 -
621 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
622 -
623 -
624 -= 7. OTA System Update =
625 -
626 -
627 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
628 -
629 -
630 -= 8. Trouble Shooting =
631 -
632 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
633 -
634 -
635 -[[image:image-20220920135918-1.png]]
636 -
637 -
638 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
639 -
640 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
641 -
642 -
643 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
644 -
645 -**Click the update URL button to configure the URL with the current eth port address.**
646 -
647 -[[image:image-20220920141936-2.png]]
648 -
649 -
650 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
651 -
652 -
653 -(((
654 654  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
655 655  )))
656 656  
... ... @@ -658,42 +658,38 @@
658 658  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
659 659  
660 660  
661 -= 10. Reference =
387 += **11 Reference** =
662 662  
663 -
664 664  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
665 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
666 666  
667 667  
668 668  )))
669 669  
670 -= 11. Order Info =
394 += **12. Order Info** =
671 671  
672 -
673 673  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
674 674  
675 675  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
676 676  
677 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
678 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
679 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
680 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
681 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
682 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
400 +* **AS923**: LoRaWAN AS923 band
401 +* **AU915**: LoRaWAN AU915 band
402 +* **EU868**: LoRaWAN EU868 band
403 +* **KR920**: LoRaWAN KR920 band
404 +* **US915**: LoRaWAN US915 band
405 +* **IN865**: LoRaWAN IN865 band
683 683  
684 684  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
685 685  
686 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
687 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
688 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
689 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
409 +* ** E**: EMEA, Korea, Thailand, India.
410 +* ** A**: North America/ Rogers/AT&T/T-Mobile.
411 +* ** AU**: Latin America, New Zeland, Taiwan
412 +* ** J**: Japan, DOCOMO/SoftBank/ KDDI
690 690  
691 691  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
692 692  
693 693  
694 -= 12. Manufacturer Info =
417 += **13. Manufacturer Info** =
695 695  
696 -
697 697  **Shenzhen Dragino Technology Development co. LTD**
698 698  
699 699  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -701,38 +701,21 @@
701 701  LongCheng Street, LongGang District ; Shenzhen 518116,China
702 702  
703 703  
704 -= 13. FCC Warning =
426 += **14. FCC Warning** =
705 705  
706 -
707 -(((
708 708  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
709 -)))
710 710  
711 -(((
712 712  ~-~- Reorient or relocate the receiving antenna.
713 -)))
714 714  
715 -(((
716 716  ~-~- Increase the separation between the equipment and receiver.
717 -)))
718 718  
719 -(((
720 720  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
721 -)))
722 722  
723 -(((
724 724  ~-~- Consult the dealer or an experienced radio/TV technician for help.
725 -)))
726 726  
727 727  
728 -(((
729 729  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
730 -)))
731 731  
732 732  
733 -(((
734 734  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
735 -
736 -
737 737  )))
738 -)))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -397.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0