Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 138.1 >
edited by Kilight Cao
on 2023/01/13 11:41
To version < 296.1 >
edited by Edwin Chen
on 2024/03/18 09:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +LPS8v2 -- LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Edwin
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  )))
10 10  
11 -**Table of Contents：**
11 +**Table of Contents:**
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,11 +57,13 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  == 1.3 Features ==
... ... @@ -79,35 +79,31 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
86 86  
87 87  
88 -
89 -== 1.5 LED Indicators ==
90 -
91 -
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
111 111  
112 112  
113 113  LPS8-V2 has a black toggle button, which is:
... ... @@ -115,14 +115,25 @@
115 115  
116 116  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
119 119  
120 120  
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
124 124  
125 125  
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 +
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 +
128 +
129 +When the gateway restores the factory settings is complete,
130 +
131 +The WiFi configuration will enable WiFi Access Point by default.
132 +
133 +The other configuration will be restored to the default configuration.
134 +
126 126  = 2. Quick Start =
127 127  
128 128  
... ... @@ -131,14 +131,29 @@
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
143 +== 2.1 Access and Configure LPS8-V2 ==
135 135  
136 -== 2.1.1 connect the network ==
145 +=== 2.1.1 Find IP address of LPS8-V2 ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
151 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
152 +
153 +(% style="background-color:yellow" %)**dragino+dragino**
154 +
155 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
156 +
157 +[[image:image-20230527084515-1.png]]
158 +
159 +[[image:image-20230527085250-2.png||height="495" width="284"]]
160 +
161 +
162 +
163 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
164 +
165 +
142 142  (((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
... ... @@ -150,9 +150,10 @@
150 150  [[image:image-20220622100129-1.png||height="332" width="1263"]]
151 151  
152 152  
153 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
154 154  
178 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
155 155  
180 +
156 156  [[image:image-20230107084650-2.png||height="310" width="839"]]
157 157  
158 158  
... ... @@ -162,20 +162,28 @@
162 162  
163 163  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
164 164  
190 +
191 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
192 +
193 +
165 165  As in the below photo:
166 166  
167 -[[image:image-20230107085904-4.png||height="443" width="361"]]
196 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
168 168  
169 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
170 170  
199 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
171 171  
172 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
173 173  
174 174  
204 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
175 175  
176 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
206 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
177 177  
178 178  
209 +
210 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
211 +
179 179  [[image:image-20220622100542-2.png||height="369" width="1256"]]
180 180  
181 181  
... ... @@ -195,7 +195,7 @@
195 195  [[image:image-20220622102901-8.png||height="476" width="938"]]
196 196  
197 197  
198 -== 2.1.2 Access Configure Web UI ==
231 +=== 2.1.2 Access Configure Web UI ===
199 199  
200 200  
201 201  **Web Interface**
... ... @@ -209,18 +209,90 @@
209 209  
210 210  The account details for Web Login are:
211 211  
212 -(% style="color:#4f81bd" %)**User Name: root**
245 +(% style="color:blue" %)**User Name: root**
213 213  
214 -(% style="color:#4f81bd" %)**Password:   dragino**
247 +(% style="color:blue" %)**Password:   dragino**
215 215  
216 216  [[image:image-20230106153501-1.png||height="367" width="894"]]
217 217  
218 218  
219 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
252 +== 2.2  Typical Network Setup ==
220 220  
221 -=== 2.2.1 Select your area frequency ===
254 +=== 2.2.1  Overview ===
222 222  
223 223  
257 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
258 +
259 +* **WAN Port Internet Mode**
260 +
261 +* **WiFi Client Mode**
262 +
263 +* **Cellular Mode**
264 +
265 +=== 2.2.2  Use WAN port to access Internet ===
266 +
267 +
268 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
269 +
270 +
271 +[[image:image-20230411100633-2.png||height="501" width="935"]]
272 +
273 +
274 +=== 2.2.3  Access the Internet as a WiFi Client ===
275 +
276 +
277 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
278 +
279 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
280 +
281 +[[image:image-20230411095739-1.png||height="264" width="691"]]
282 +
283 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
284 +
285 +
286 +=== 2.2.4  Use built-in 4G modem for internet access ===
287 +
288 +
289 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
290 +
291 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
292 +
293 +
294 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
295 +
296 +First, install the Micro SIM card as below direction
297 +
298 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
299 +
300 +
301 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
302 +
303 +
304 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
305 +
306 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
307 +
308 +
309 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
310 +
311 +
312 +=== 2.2.5  Check Internet connection ===
313 +
314 +
315 +In the **home** page, we can check the Internet connection.
316 +
317 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
318 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
319 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
320 +
321 +[[image:image-20230411101534-3.png||height="544" width="942"]]
322 +
323 +
324 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
325 +
326 +=== 2.3.1 Select your area frequency ===
327 +
328 +
224 224  (((
225 225  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
226 226  
... ... @@ -230,7 +230,7 @@
230 230  [[image:image-20220622103332-9.png||height="485" width="938"]]
231 231  
232 232  
233 -=== 2.2.2 Get the only gateway EUI ===
338 +=== 2.3.2 Get the only gateway EUI ===
234 234  
235 235  
236 236  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -254,7 +254,7 @@
254 254  [[image:image-20220622103956-12.png]]
255 255  
256 256  
257 -== 2.2.3 Register the gateway to The Things Network ==
362 +=== 2.3.3 Register the gateway to The Things Network ===
258 258  
259 259  
260 260  **Login to The Things Network**
... ... @@ -275,7 +275,7 @@
275 275  == 3.1 Home ==
276 276  
277 277  
278 -//Shows the system running status~://
383 +Shows the system running status:
279 279  
280 280  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
281 281  
... ... @@ -285,15 +285,15 @@
285 285  === 3.2.1 LoRa ~-~-> LoRa ===
286 286  
287 287  
288 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
393 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
289 289  
290 -//Different LPS8v2 hardware versions can support different frequency ranges~://
395 +Different LPS8v2 hardware versions can support different frequency ranges:
291 291  
292 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
293 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
397 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
398 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
294 294  
295 295  (% class="wikigeneratedid" %)
296 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
401 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
297 297  
298 298  
299 299  (% class="wikigeneratedid" %)
... ... @@ -310,7 +310,7 @@
310 310  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
311 311  
312 312  
313 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
418 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
314 314  
315 315  
316 316  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -319,7 +319,7 @@
319 319  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
320 320  
321 321  
322 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
427 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
323 323  
324 324  
325 325  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -334,8 +334,9 @@
334 334  
335 335  === 3.4.1 Network ~-~-> WiFi ===
336 336  
442 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
337 337  
338 -[[image:image-20220616114756-4.png||height="251" width="669"]]
444 +[[image:image-20230619095946-1.png||height="332" width="827"]]
339 339  
340 340  
341 341  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -344,12 +344,34 @@
344 344  [[image:image-20220820134112-2.png||height="539" width="668"]]
345 345  
346 346  
347 -=== 3.4.3 Network ~-~-> Firewall ===
453 +=== 3.4.3 Network ~-~-> Network ===
348 348  
349 349  
350 -[[image:image-20220616115351-6.png||height="244" width="661"]]
456 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
351 351  
458 +[[image:image-20230214093657-2.png||height="333" width="858"]]
352 352  
460 +
461 +=== 3.4.4 Network ~-~-> Cellular ===
462 +
463 +
464 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
465 +
466 +(% style="color:red" %)**Note: APN cannot be empty.**
467 +
468 +[[image:image-20230228115126-1.png]]
469 +
470 +
471 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
472 +
473 +[[image:image-20230228115535-2.png||height="478" width="888"]]
474 +
475 +
476 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
477 +
478 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
479 +
480 +
353 353  == 3.5 System ==
354 354  
355 355  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -357,105 +357,134 @@
357 357  
358 358  Shows the system info:
359 359  
360 -[[image:image-20220917144512-5.png||height="618" width="853"]]
488 +[[image:image-20231031162854-1.png]]
361 361  
362 362  
363 363  === 3.5.2 System ~-~-> System General ===
364 364  
365 365  
366 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
494 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
367 367  
368 -[[image:image-20230107084158-1.png||height="543" width="844"]]
496 +In addition, Users can customize the FallBack IP address.
369 369  
498 +[[image:image-20230214094058-3.png]]
370 370  
500 +
371 371  === 3.5.3 System ~-~-> Backup/Restore ===
372 372  
373 373  
374 -[[image:image-20220917144725-6.png||height="208" width="869"]]
504 +[[image:image-20231031162927-2.png]]
375 375  
506 +=== 3.5.4 System ~-~-> Reboot / Reset ===
376 376  
377 -=== 3.5.4 System ~-~-> Remoteit ===
508 +In the **System-> Reboot / Reset** interface, users can can restart or reset the gateway.
378 378  
510 +ETH LED will SOLID BULE Until the restore is finished.
379 379  
380 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
512 +When the gateway restores the factory settings is complete,
381 381  
514 +The WiFi configuration will enable WiFi Access Point by default.
382 382  
383 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
516 +The other configuration will be restored to the default configuration.
384 384  
385 -[[image:image-20221230092303-2.png]]
518 +[[image:image-20240203172853-1.png||height="365" width="901"]]
386 386  
387 387  
388 -= 4. Build-in Server =
521 +=== 3.5.5 System ~-~-> Remoteit ===
389 389  
390 390  
391 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
524 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
392 392  
393 393  
394 -[[image:image-20220820115644-1.png||height="217" width="778"]]
527 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
395 395  
529 +[[image:image-20221230092303-2.png]]
396 396  
397 -(% style="color:red" %)**Note:**
398 398  
399 - **Path**: System ~-~-> Built-in Server
532 +=== 3.5.6 System ~-~-> Package Management ===
400 400  
401 401  
402 -**Troubleshooting:**
535 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
403 403  
537 +[[image:image-20230214094316-4.png]]
404 404  
405 -**~ 1. URL does not jump properly**
406 406  
407 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
540 += 4. Build-in Server =
408 408  
409 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
410 410  
411 411  
412 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
545 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
413 413  
547 +[[image:image-20231106180816-4.png||height="416" width="896"]]
414 414  
415 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
549 +[[image:image-20231201165904-1.png||height="466" width="899"]]
416 416  
417 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
551 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
418 418  
553 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
419 419  
420 -Login account:
421 421  
422 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
423 423  
424 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
557 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
425 425  
426 426  
427 -[[image:image-20220725171719-1.png||height="570" width="769"]]
560 +[[image:image-20230616175558-7.png||height="362" width="894"]]
428 428  
562 +[[image:image-20231201170355-2.png||height="536" width="899"]]
429 429  
430 -== 4.2 Application Server ~-~- Node-Red ==
564 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
431 431  
432 432  
433 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
434 434  
568 +== **3). Troubleshooting:** ==
435 435  
436 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
437 437  
571 +* (((
572 +=== ** If the URL does not jump properly.** ===
573 +)))
438 438  
439 -[[image:image-20220725172124-3.png||height="610" width="843"]]
575 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
440 440  
577 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
441 441  
442 442  
443 -=== **Using Node-Red, InfluxDB and Grafana** ===
580 +* (((
581 +=== ** How to install InfluxDB, Garfana.** ===
582 +)))
444 444  
445 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
584 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
446 446  
447 447  
448 -the users can refer to this link to install them.
587 +* (((
588 +=== ** How to upgrade the gateway node.js to the latest version.** ===
589 +)))
449 449  
450 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
591 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
451 451  
452 -== 4.3 How to disable the built-in server ==
453 453  
594 +* (((
595 +=== ** How to batch register device on the built-in Chirpstack network server** ===
596 +)))
454 454  
455 -Use the following commands to start and stop the TTNv3 service:
598 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
456 456  
600 +
601 +* (((
602 +=== ** Why my gateway is not Chirpstack?** ===
603 +)))
604 +
605 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
606 +
607 +
608 +* (((
609 +=== ** How to disable the built-in server** ===
610 +)))
611 +
457 457  (% class="box infomessage" %)
458 458  (((
614 +Use the following commands to start and stop the TTNv3 service:**     **
615 +
459 459  **# start**
460 460  systemctl start ttnstack
461 461  
... ... @@ -469,10 +469,10 @@
469 469  systemctl disable ttnstack
470 470  )))
471 471  
472 -Use the following commands to start and stop the Node-Red service:
473 -
474 474  (% class="box infomessage" %)
475 475  (((
631 +Use the following commands to start and stop the Node-Red service:
632 +
476 476  **# start**
477 477  systemctl start nodered
478 478  
... ... @@ -486,22 +486,52 @@
486 486  systemctl disable nodered
487 487  )))
488 488  
489 -== 4.4 How to use ChirpStack on LPS8V2 ==
490 490  
647 +* (((
648 +=== ** How to choose the Chirpstack server frequency SubBand** ===
649 +)))
491 491  
492 -By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
651 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
493 493  
653 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
494 494  
495 -= 5. How users can access LPS8v2 using serial USB =
655 +[[image:image-20230602140406-3.png||height="480" width="918"]]
496 496  
497 497  
498 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
658 +When the configuration is complete, click** "Save&Apply"**.
499 499  
500 500  
501 -Port 1 of the UART on the LPS8v2 is GND
661 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
502 502  
663 +[[image:image-20230602143122-4.png||height="511" width="983"]]
664 +
665 +
666 += 5. Watch Dog =
667 +
668 +
669 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
670 +
671 +The uses can be via the below method to enable Watch Dog:
672 +
673 +
503 503  (% class="box infomessage" %)
504 504  (((
676 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
677 +)))
678 +
679 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
680 +
681 +
682 +
683 += 6. How users can access LPS8-V2 using serial USB =
684 +
685 +
686 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
687 +
688 +Port 1 of the UART on the LPS8-V2 is GND
689 +
690 +(% class="box infomessage" %)
691 +(((
505 505  **TXD  <~-~--> UART RXD (Gray line)**
506 506  
507 507  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -509,12 +509,10 @@
509 509  **GND <~-~--> GND (Black line)**
510 510  )))
511 511  
512 -
513 513  **LPS8v2 UART connection photo**
514 514  
515 -[[image:image-20220804163015-1.png||height="621" width="466"]]
701 +[[image:image-20230421094319-2.png||height="351" width="392"]]
516 516  
517 -
518 518  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
519 519  
520 520  
... ... @@ -524,114 +524,219 @@
524 524  [[image:image-20220804164747-2.png||height="622" width="594"]]
525 525  
526 526  
527 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
712 += 7. OTA System Update =
528 528  
529 529  
530 -== **Step 1: Configure Frequency Band** ==
715 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
531 531  
532 532  
533 -//Each country has a requirement for frequency region. Choose the right one for your area.//
718 +== 7.1 Auto-update method ==
534 534  
535 -[[image:image-20220905164308-1.png]]
536 536  
721 +The default, each gateway will enable the auto-update function.
537 537  
723 +this function will be triggered every boot and every midnight.
538 538  
539 -== **Step 2: Configure the forward address** ==
540 540  
726 +Users can enable/disable it via Web Page
541 541  
542 -**Select one of the servers to configure.**
728 +[[image:image-20230607094447-2.png]]
543 543  
544 -**For example:**
545 545  
546 -[[image:image-20220905164847-2.png]]
731 +== 7.2 Manual upgrade method ==
547 547  
548 548  
734 +1). Using the Linux command to upgrade the system
549 549  
550 -== **Step 3: Download and Install the Helium-gateway-rs** ==
551 551  
737 +(% class="box infomessage" %)
738 +(((
739 +**apt update && apt install *dragino***
740 +)))
552 552  
553 -**Access the gateway CLI via SSH.**
554 554  
555 -[[image:image-20220905165222-3.png]]
743 +2). Upgrade the system via the Web page button of "Manual Update"
556 556  
557 557  
558 -**Download gateway-rs.**
746 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
559 559  
560 -[[image:image-20220905165715-5.png]]
748 +[[image:image-20230607093849-1.png]]
561 561  
750 +
751 +
752 += 8. FAQ =
753 +
754 +== 8.1 How to change Hostname ==
755 +
756 +
757 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
758 +
562 562  (% class="box infomessage" %)
563 563  (((
564 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
761 +hostnamectl set-hostname dragino-123456
565 565  )))
566 566  
764 +[[image:image-20230517102429-1.png]]
567 567  
568 -**Install gateway-rs.**
766 +After the configuration is complete, run "reboot" to restart the gateway.
569 569  
570 -[[image:image-20220905165917-7.png]]
571 571  
769 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
770 +
771 +
772 +Migrate guide:
773 +
774 +To stabilize the completion of the migration, The users can migrate in one of the following ways
775 +
776 +**Method 1. Using the Linux shell, **
777 +
778 +**Method 2. Flash a new image with the Chirpstack**
779 +
780 +
781 +
782 +=== Method 1: Using the Linux shell ===
783 +
572 572  (% class="box infomessage" %)
573 573  (((
574 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
786 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
575 575  )))
576 576  
577 577  
578 -**Modify configuration.**
579 579  
791 +=== Method 2: Flash a new image ===
580 580  
581 -[[image:image-20220905173847-12.png]]
793 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
582 582  
583 583  
796 +
797 +== 8.3 How to reduce the 4g data consumed ==
798 +
799 +
800 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
801 +
802 +[[image:image-20230719100239-1.png||height="724" width="994"]]
803 +
804 +
805 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
806 +
807 +[[image:image-20230719100332-2.png]]
808 +
809 +
810 +3. Disable the auto-update:
811 +
812 +[[image:image-20230719100419-3.png||height="458" width="995"]]
813 +
814 +
815 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
816 +
817 +
584 584  (% class="box infomessage" %)
585 585  (((
586 -**region=<Enter regional parameters> \
587 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
588 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
820 +apt update && apt install helium-gateway
589 589  )))
590 590  
591 591  
592 -**Restart the helium_gateway**
824 +== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
593 593  
594 -[[image:image-20220905170920-9.png]]
595 595  
827 +By default, the LPS8v2's built-in server is ChirpStack v4,
596 596  
829 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
830 +
831 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
832 +
833 +
834 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
835 +
836 +
837 +== 8.6 How do I view gateway logs ==
838 +
839 +=== 8.6.1 LoRaWAN Log: ===
840 +
841 +==== Semtech UDP Log : ====
842 +
843 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
844 +
845 +[[image:image-20231017112115-2.png||height="611" width="821"]]
846 +
847 +
848 +==== Station Log: ====
849 +
850 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
851 +
852 +[[image:image-20231017111606-1.png||height="622" width="821"]]
853 +
854 +
855 +=== 8.6.2  4G Log ===
856 +
857 +The user needs to access the Linux console of the gateway and enter the following command:
858 +
597 597  (% class="box infomessage" %)
598 598  (((
599 -**systemctl restart helium_gateway**
861 +cat /var/log/qmilog.txt
600 600  )))
601 601  
864 +[[image:image-20231017114417-3.png||height="543" width="679"]]
602 602  
603 -**Check the helium_gateway Log：**
604 604  
605 -[[image:image-20220905173952-13.png]]
867 +=== 8.6.3 Dmesg Log ===
606 606  
869 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
607 607  
871 +[[image:image-20231017115330-5.png||height="565" width="740"]]
872 +
873 +
874 +=== 8.6.4 Record Log ===
875 +
876 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
877 +
878 +[[image:image-20231017115124-4.png||height="215" width="880"]]
879 +
880 +
881 +=== 8.6.5 View gateway logs via Linux Command ===
882 +
883 +**Semtech UDP Log :**
884 +
608 608  (% class="box infomessage" %)
609 609  (((
610 -**journalctl -u helium_gateway -f**
887 +**journalctl -u draginofwd -f**
611 611  )))
612 612  
890 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
613 613  
614 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
615 615  
616 -where the helium gateway log is shown:
893 +**Station Log:**
617 617  
618 -[[image:image-20220905174534-14.png]]
895 +(% class="box infomessage" %)
896 +(((
897 +**tail -f /var/log/station.log **
898 +)))
619 619  
900 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
620 620  
621 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
622 622  
903 +**Dmesg Log:**
623 623  
624 -= 7. OTA System Update =
905 +(% class="box infomessage" %)
906 +(((
907 +**dmesg**
908 +)))
625 625  
910 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
626 626  
627 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
628 628  
913 +== 8.7 DIN Mount Reference: ==
629 629  
630 -= 8. Trouble Shooting =
915 +[[image:image-20240318095605-1.jpeg||height="472" width="472"]]
631 631  
632 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
917 +[[image:image-20240318095617-2.png]]
633 633  
634 634  
920 += 9. Trouble Shooting =
921 +
922 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
923 +
924 +
635 635  [[image:image-20220920135918-1.png]]
636 636  
637 637  
... ... @@ -647,20 +647,89 @@
647 647  [[image:image-20220920141936-2.png]]
648 648  
649 649  
650 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
940 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
651 651  
652 652  
943 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
944 +
945 +[[image:image-20230508171607-1.png]]
946 +
947 +
948 +== 9.3  Fallback IP does not work, how can users check ==
949 +
950 +
951 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
952 +
953 +
954 +**1.Check whether the configuration is correct**
955 +
956 +Run the CMD command to ipconfig and ping 172.31.255.254.
957 +
958 +If this fails, the user needs to reconfigure.
959 +
960 +[[image:image-20230413170224-3.png||height="433" width="707"]]
961 +
962 +[[image:image-20230413170246-4.png]]
963 +
964 +
965 +**2. Check whether the firewall is disabled**
966 +
967 +If the firewall is not down, this will affect access to the gateway.
968 +
969 +
970 +== 9.4  Click "Manual_Update", why there is no response? ==
971 +
972 +
973 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
974 +
975 +
976 +[[image:image-20230527090555-3.png||height="660" width="832"]]
977 +
978 +
979 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
980 +
981 +
982 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
983 +
984 +
985 +(% class="box infomessage" %)
653 653  (((
654 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
987 +apt update && apt install *dragino*
988 +
989 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
655 655  )))
656 656  
992 +
993 +== 9.6  How to reset the built-in server ==
994 +
995 +
996 +**1) Build-in The Things Network**
997 +
998 +Refer to this link to delete the Built-in server's device.
999 +
1000 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
1001 +
1002 +
1003 +**2) Build-in Chirpstack**
1004 +
1005 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
1006 +
1007 +[[image:image-20231106180846-5.png||height="310" width="668"]]
1008 +
1009 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
1010 +
1011 +
657 657  (((
658 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
1013 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
1014 +)))
659 659  
1016 +(((
1017 +With your question as detailed as possible. We will reply and help you in the shortest.
660 660  
661 -= 10. Reference =
662 662  
1020 += 11. Reference =
663 663  
1022 +
664 664  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
665 665  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
666 666  
... ... @@ -667,7 +667,7 @@
667 667  
668 668  )))
669 669  
670 -= 11. Order Info =
1029 += 12. Order Info =
671 671  
672 672  
673 673  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -675,23 +675,31 @@
675 675  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
676 676  
677 677  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1037 +
678 678  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1039 +
679 679  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1041 +
680 680  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1043 +
681 681  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1045 +
682 682  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
683 683  
684 684  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
685 685  
686 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
687 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
688 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
689 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1050 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
690 690  
1052 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1053 +
1054 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1055 +
1056 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1057 +
691 691  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
692 692  
693 693  
694 -= 12. Manufacturer Info =
1061 += 13. Manufacturer Info =
695 695  
696 696  
697 697  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -701,7 +701,7 @@
701 701  LongCheng Street, LongGang District ; Shenzhen 518116,China
702 702  
703 703  
704 -= 13. FCC Warning =
1071 += 14. FCC Warning =
705 705  
706 706  
707 707  (((
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20240203172853-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content
image-20240318095605-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content
image-20240318095617-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0