Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 134.1 >
edited by Kilight Cao
on 2023/01/07 09:07
To version < 233.1 >
edited by Xiaoye
on 2023/07/19 10:04
>
Change comment: Uploaded new attachment "image-20230719100419-3.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,11 +57,13 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  == 1.3 Features ==
... ... @@ -79,35 +79,31 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
86 86  
87 87  
88 -
89 -== 1.5 LED Indicators ==
90 -
91 -
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
111 111  
112 112  
113 113  LPS8-V2 has a black toggle button, which is:
... ... @@ -115,12 +115,12 @@
115 115  
116 116  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
119 119  
120 120  
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
124 124  
125 125  
126 126  = 2. Quick Start =
... ... @@ -131,14 +131,29 @@
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
132 +== 2.1 Access and Configure LPS8-V2 ==
135 135  
136 -== 2.1.1 connect the network ==
134 +=== 2.1.1 Find IP address of LPS8-V2 ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
141 +
142 +(% style="background-color:yellow" %)**dragino+dragino**
143 +
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 +
146 +[[image:image-20230527084515-1.png]]
147 +
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +
150 +
151 +
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 +
154 +
142 142  (((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
... ... @@ -149,28 +149,42 @@
149 149  
150 150  [[image:image-20220622100129-1.png||height="332" width="1263"]]
151 151  
152 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
153 153  
154 154  
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
168 +
169 +
155 155  [[image:image-20230107084650-2.png||height="310" width="839"]]
156 156  
157 157  
158 -(% style="color:blue" %)**Steps to connect via fall back IP:**
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
159 159  
160 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
161 161  
162 162  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
163 163  
164 -As below photo:
165 165  
166 -[[image:image-20230107085904-4.png||height="443" width="361"]]
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
167 167  
182 +
183 +As in the below photo:
184 +
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 +
187 +
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 +
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 +
192 +
168 168  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
169 169  
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
170 170  
171 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
172 172  
173 173  
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
174 174  [[image:image-20220622100542-2.png||height="369" width="1256"]]
175 175  
176 176  
... ... @@ -190,7 +190,7 @@
190 190  [[image:image-20220622102901-8.png||height="476" width="938"]]
191 191  
192 192  
193 -== 2.1.2 Access Configure Web UI ==
220 +=== 2.1.2 Access Configure Web UI ===
194 194  
195 195  
196 196  **Web Interface**
... ... @@ -204,18 +204,90 @@
204 204  
205 205  The account details for Web Login are:
206 206  
207 -(% style="color:#4f81bd" %)**User Name: root**
234 +(% style="color:blue" %)**User Name: root**
208 208  
209 -(% style="color:#4f81bd" %)**Password:   dragino**
236 +(% style="color:blue" %)**Password:   dragino**
210 210  
211 211  [[image:image-20230106153501-1.png||height="367" width="894"]]
212 212  
213 213  
214 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
241 +== 2.2  Typical Network Setup ==
215 215  
216 -=== 2.2.1 Select your area frequency ===
243 +=== 2.2.1  Overview ===
217 217  
218 218  
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
219 219  (((
220 220  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
221 221  
... ... @@ -225,7 +225,7 @@
225 225  [[image:image-20220622103332-9.png||height="485" width="938"]]
226 226  
227 227  
228 -=== 2.2.2 Get the only gateway EUI ===
327 +=== 2.3.2 Get the only gateway EUI ===
229 229  
230 230  
231 231  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -249,7 +249,7 @@
249 249  [[image:image-20220622103956-12.png]]
250 250  
251 251  
252 -== 2.2.3 Register the gateway to The Things Network ==
351 +=== 2.3.3 Register the gateway to The Things Network ===
253 253  
254 254  
255 255  **Login to The Things Network**
... ... @@ -270,7 +270,7 @@
270 270  == 3.1 Home ==
271 271  
272 272  
273 -//Shows the system running status~://
372 +Shows the system running status:
274 274  
275 275  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
276 276  
... ... @@ -280,15 +280,15 @@
280 280  === 3.2.1 LoRa ~-~-> LoRa ===
281 281  
282 282  
283 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
284 284  
285 -//Different LPS8v2 hardware versions can support different frequency ranges~://
384 +Different LPS8v2 hardware versions can support different frequency ranges:
286 286  
287 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
288 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
289 289  
290 290  (% class="wikigeneratedid" %)
291 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
292 292  
293 293  
294 294  (% class="wikigeneratedid" %)
... ... @@ -305,7 +305,7 @@
305 305  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
306 306  
307 307  
308 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
309 309  
310 310  
311 311  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -314,7 +314,7 @@
314 314  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
315 315  
316 316  
317 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
318 318  
319 319  
320 320  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -329,8 +329,9 @@
329 329  
330 330  === 3.4.1 Network ~-~-> WiFi ===
331 331  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
332 332  
333 -[[image:image-20220616114756-4.png||height="251" width="669"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
334 334  
335 335  
336 336  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -339,12 +339,29 @@
339 339  [[image:image-20220820134112-2.png||height="539" width="668"]]
340 340  
341 341  
342 -=== 3.4.3 Network ~-~-> Firewall ===
442 +=== 3.4.3 Network ~-~-> Network ===
343 343  
344 344  
345 -[[image:image-20220616115351-6.png||height="244" width="661"]]
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
346 346  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
347 347  
449 +
450 +=== 3.4.4 Network ~-~-> Cellular ===
451 +
452 +
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
454 +
455 +(% style="color:red" %)**Note: APN cannot be empty.**
456 +
457 +[[image:image-20230228115126-1.png]]
458 +
459 +
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
461 +
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
463 +
464 +
348 348  == 3.5 System ==
349 349  
350 350  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -358,11 +358,13 @@
358 358  === 3.5.2 System ~-~-> System General ===
359 359  
360 360  
361 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
478 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
362 362  
363 -[[image:image-20230107084158-1.png||height="543" width="844"]]
480 +In addition, Users can customize the FallBack IP address.
364 364  
482 +[[image:image-20230214094058-3.png]]
365 365  
484 +
366 366  === 3.5.3 System ~-~-> Backup/Restore ===
367 367  
368 368  
... ... @@ -372,7 +372,7 @@
372 372  === 3.5.4 System ~-~-> Remoteit ===
373 373  
374 374  
375 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
494 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
376 376  
377 377  
378 378  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -380,34 +380,46 @@
380 380  [[image:image-20221230092303-2.png]]
381 381  
382 382  
502 +=== 3.5.5 System ~-~-> Package Management ===
503 +
504 +
505 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 +
507 +[[image:image-20230214094316-4.png]]
508 +
509 +
383 383  = 4. Build-in Server =
384 384  
385 385  
386 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
387 387  
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
388 388  
389 -[[image:image-20220820115644-1.png||height="217" width="778"]]
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
390 390  
391 391  
520 +
392 392  (% style="color:red" %)**Note:**
393 393  
394 - **Path**: System ~-~-> Built-in Server
523 + **Path**: Server ~-~-> Network Server
395 395  
525 + Server ~-~-> Application Server
396 396  
527 +
397 397  **Troubleshooting:**
398 398  
399 399  
400 400  **~ 1. URL does not jump properly**
401 401  
402 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
403 403  
404 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
405 405  
406 406  
407 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
408 408  
409 409  
410 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
411 411  
412 412  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
413 413  
... ... @@ -414,14 +414,25 @@
414 414  
415 415  Login account:
416 416  
417 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 +**Username : ** (% style="background-color:yellow" %)**admin**
418 418  
419 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
420 420  
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
421 421  
422 -[[image:image-20220725171719-1.png||height="570" width="769"]]
423 423  
424 424  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
557 +
558 +
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 +
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +
563 +[[image:image-20230321092456-1.png]]
564 +
565 +
566 +
425 425  == 4.2 Application Server ~-~- Node-Red ==
426 426  
427 427  
... ... @@ -445,146 +445,211 @@
445 445  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
446 446  
447 447  
448 -= 5. How users can access LPS8v2 using serial USB =
590 +=== **Upgrade the node.js** ===
449 449  
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
450 450  
451 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
452 452  
595 +the users can refer to this link to upgrade them.
453 453  
454 -Port 1 of the UART on the LPS8v2 is GND
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
455 455  
599 +
600 +== 4.3 How to disable the built-in server ==
601 +
602 +
603 +Use the following commands to start and stop the TTNv3 service:
604 +
456 456  (% class="box infomessage" %)
457 457  (((
458 -**TXD  <~-~--> UART RXD (Gray line)**
607 +**# start**
608 +systemctl start ttnstack
459 459  
460 -**RXD  <~-~--> UART TXD (White line)**
610 +**# stop**
611 +systemctl stop ttnstack
461 461  
462 -**GND <~-~--> GND (Black line)**
613 +**# enable**
614 +systemctl enable ttnstack
615 +
616 +**#disable**
617 +systemctl disable ttnstack
463 463  )))
464 464  
620 +Use the following commands to start and stop the Node-Red service:
465 465  
466 -**LPS8v2 UART connection photo**
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
467 467  
468 -[[image:image-20220804163015-1.png||height="621" width="466"]]
627 +**# stop**
628 +systemctl stop nodered
469 469  
630 +**# enable**
631 +systemctl enable nodered
470 470  
471 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
633 +**#disable**
634 +systemctl disable nodered
635 +)))
472 472  
473 473  
474 -[[image:image-20220804164928-3.png||height="320" width="332"]]
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
475 475  
476 476  
477 -[[image:image-20220804164747-2.png||height="622" width="594"]]
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
478 478  
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
479 479  
480 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
481 481  
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
482 482  
483 -== **Step 1: Configure Frequency Band** ==
484 484  
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
485 485  
486 -//Each country has a requirement for frequency region. Choose the right one for your area.//
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
487 487  
488 -[[image:image-20220905164308-1.png]]
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
489 489  
490 490  
656 +When the configuration is complete, click** "Save&Apply"**.
491 491  
492 -== **Step 2: Configure the forward address** ==
493 493  
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
494 494  
495 -**Select one of the servers to configure.**
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
496 496  
497 -**For example:**
498 498  
499 -[[image:image-20220905164847-2.png]]
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
500 500  
501 501  
502 502  
503 -== **Step 3: Download and Install the Helium-gateway-rs** ==
668 += 6. How users can access LPS8-V2 using serial USB =
504 504  
505 505  
506 -**Access the gateway CLI via SSH.**
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
507 507  
508 -[[image:image-20220905165222-3.png]]
509 509  
674 +Port 1 of the UART on the LPS8-V2 is GND
510 510  
511 -**Download gateway-rs.**
512 -
513 -[[image:image-20220905165715-5.png]]
514 -
515 515  (% class="box infomessage" %)
516 516  (((
517 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
678 +**TXD  <~-~--> UART RXD (Gray line)**
679 +
680 +**RXD  <~-~--> UART TXD (White line)**
681 +
682 +**GND <~-~--> GND (Black line)**
518 518  )))
519 519  
520 520  
521 -**Install gateway-rs.**
686 +**LPS8v2 UART connection photo**
522 522  
523 -[[image:image-20220905165917-7.png]]
524 524  
525 -(% class="box infomessage" %)
526 -(((
527 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
528 -)))
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
529 529  
691 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
530 530  
531 -**Modify configuration.**
532 532  
694 +[[image:image-20220804164928-3.png||height="320" width="332"]]
533 533  
534 -[[image:image-20220905173847-12.png]]
535 535  
697 +[[image:image-20220804164747-2.png||height="622" width="594"]]
536 536  
537 -(% class="box infomessage" %)
538 -(((
539 -**region=<Enter regional parameters> \
540 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
541 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
542 -)))
543 543  
700 += 7. OTA System Update =
544 544  
545 -**Restart the helium_gateway**
546 546  
547 -[[image:image-20220905170920-9.png]]
703 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
548 548  
549 549  
706 +== 7.1 Auto-update method ==
707 +
708 +
709 +The default, each gateway will enable the auto-update function.
710 +
711 +this function will be triggered every boot and every midnight.
712 +
713 +
714 +Users can enable/disable it via Web Page
715 +
716 +[[image:image-20230607094447-2.png]]
717 +
718 +
719 +== 7.2 Manual upgrade method ==
720 +
721 +
722 +1). Using the Linux command to upgrade the system
723 +
724 +
550 550  (% class="box infomessage" %)
551 551  (((
552 -**systemctl restart helium_gateway**
727 +**apt update && apt install *dragino***
553 553  )))
554 554  
555 555  
556 -**Check the helium_gateway Log：**
731 +2). Upgrade the system via the Web page button of "Manual Update"
557 557  
558 -[[image:image-20220905173952-13.png]]
559 559  
734 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
560 560  
736 +[[image:image-20230607093849-1.png]]
737 +
738 +
739 += 8. FAQ =
740 +
741 +== 8.1 How to change Hostname ==
742 +
743 +
744 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
745 +
561 561  (% class="box infomessage" %)
562 562  (((
563 -**journalctl -u helium_gateway -f**
748 +hostnamectl set-hostname dragino-123456
564 564  )))
565 565  
751 +[[image:image-20230517102429-1.png]]
566 566  
567 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
753 +After the configuration is complete, run "reboot" to restart the gateway.
568 568  
569 -where the helium gateway log is shown:
570 570  
571 -[[image:image-20220905174534-14.png]]
756 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
572 572  
573 573  
574 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
759 +Migrate guide:
575 575  
761 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
576 576  
577 -= 7. OTA System Update =
763 +**2. On the Server ~-~-> Network Server interface, click "Management"**
578 578  
765 +[[image:image-20230616162454-1.png]]
579 579  
580 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
581 581  
768 +**3. Click "Migrate-Chirpstack"**
582 582  
583 -= 8. Trouble Shooting =
770 +[[image:image-20230616162742-2.png]]
584 584  
585 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
586 586  
773 +**4. Strat Install **
587 587  
775 +
776 +Click start Install and wait until the migration succeeds
777 +
778 +[[image:image-20230616162934-3.png]]
779 +
780 +
781 +**5.Migration complete check result**
782 +
783 +[[image:image-20230616174526-4.png||height="706" width="983"]]
784 +
785 +
786 +[[image:image-20230616180004-9.png]]
787 +
788 +
789 +
790 += 9. Trouble Shooting =
791 +
792 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
793 +
794 +
588 588  [[image:image-20220920135918-1.png]]
589 589  
590 590  
... ... @@ -600,18 +600,57 @@
600 600  [[image:image-20220920141936-2.png]]
601 601  
602 602  
603 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
810 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
604 604  
605 605  
813 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
814 +
815 +[[image:image-20230508171607-1.png]]
816 +
817 +
818 +== 9.3  Fallback IP does not work, how can users check ==
819 +
820 +
821 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 +
823 +
824 +**1.Check whether the configuration is correct**
825 +
826 +Run the CMD command to ipconfig and ping 172.31.255.254.
827 +
828 +If this fails, the user needs to reconfigure.
829 +
830 +[[image:image-20230413170224-3.png||height="433" width="707"]]
831 +
832 +[[image:image-20230413170246-4.png]]
833 +
834 +
835 +**2. Check whether the firewall is disabled**
836 +
837 +If the firewall is not down, this will affect access to the gateway.
838 +
839 +
840 +== 9.4  Click "Manual_Update", why there is no response? ==
841 +
842 +
843 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
844 +
845 +
846 +[[image:image-20230527090555-3.png||height="660" width="832"]]
847 +
848 +
849 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
850 +
851 +
606 606  (((
607 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
853 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
608 608  )))
609 609  
610 610  (((
611 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
857 +With your question as detailed as possible. We will reply and help you in the shortest.
612 612  
613 613  
614 -= 10. Reference =
860 += 11. Reference =
615 615  
616 616  
617 617  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -620,7 +620,7 @@
620 620  
621 621  )))
622 622  
623 -= 11. Order Info =
869 += 12. Order Info =
624 624  
625 625  
626 626  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -628,23 +628,31 @@
628 628  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
629 629  
630 630  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
877 +
631 631  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
879 +
632 632  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
881 +
633 633  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
883 +
634 634  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 +
635 635  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
636 636  
637 637  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
638 638  
639 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
640 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
641 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
642 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
890 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
643 643  
892 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
893 +
894 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
895 +
896 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
897 +
644 644  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
645 645  
646 646  
647 -= 12. Manufacturer Info =
901 += 13. Manufacturer Info =
648 648  
649 649  
650 650  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -654,7 +654,7 @@
654 654  LongCheng Street, LongGang District ; Shenzhen 518116,China
655 655  
656 656  
657 -= 13. FCC Warning =
911 += 14. FCC Warning =
658 658  
659 659  
660 660  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0