Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 133.1 >
edited by Kilight Cao
on 2023/01/07 09:00
To version < 290.1 >
edited by Kilight Cao
on 2023/12/07 14:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,11 +57,13 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  == 1.3 Features ==
... ... @@ -79,35 +79,31 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
86 86  
87 87  
88 -
89 -== 1.5 LED Indicators ==
90 -
91 -
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
111 111  
112 112  
113 113  LPS8-V2 has a black toggle button, which is:
... ... @@ -115,14 +115,19 @@
115 115  
116 116  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
119 119  
120 120  
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
124 124  
125 125  
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
125 +
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
127 +
128 +
126 126  = 2. Quick Start =
127 127  
128 128  
... ... @@ -131,14 +131,29 @@
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 +== 2.1 Access and Configure LPS8-V2 ==
135 135  
136 -== 2.1.1 connect the network ==
139 +=== 2.1.1 Find IP address of LPS8-V2 ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
142 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
145 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
146 +
147 +(% style="background-color:yellow" %)**dragino+dragino**
148 +
149 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 +
151 +[[image:image-20230527084515-1.png]]
152 +
153 +[[image:image-20230527085250-2.png||height="495" width="284"]]
154 +
155 +
156 +
157 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 +
159 +
142 142  (((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
... ... @@ -149,28 +149,42 @@
149 149  
150 150  [[image:image-20220622100129-1.png||height="332" width="1263"]]
151 151  
152 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
153 153  
154 154  
172 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
173 +
174 +
155 155  [[image:image-20230107084650-2.png||height="310" width="839"]]
156 156  
157 157  
158 -(% style="color:blue" %)**Steps to connect via fall back IP:**
178 +(% style="color:blue" %)**Steps to connect via fallback IP:**
159 159  
160 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
180 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
161 161  
162 162  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
163 163  
164 -As below photo:
165 165  
166 -[[image:image-20230107085904-4.png||height="443" width="361"]]
185 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
167 167  
187 +
188 +As in the below photo:
189 +
190 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
191 +
192 +
193 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 +
195 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 +
197 +
168 168  3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
169 169  
200 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
170 170  
171 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
172 172  
173 173  
204 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 +
174 174  [[image:image-20220622100542-2.png||height="369" width="1256"]]
175 175  
176 176  
... ... @@ -190,7 +190,7 @@
190 190  [[image:image-20220622102901-8.png||height="476" width="938"]]
191 191  
192 192  
193 -== 2.1.2 Access Configure Web UI ==
225 +=== 2.1.2 Access Configure Web UI ===
194 194  
195 195  
196 196  **Web Interface**
... ... @@ -198,24 +198,96 @@
198 198  Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
199 199  
200 200  
201 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
233 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
202 202  
203 203  You will see the login interface of LPS8-V2 as shown below.
204 204  
205 205  The account details for Web Login are:
206 206  
207 -(% style="color:#4f81bd" %)**User Name: root**
239 +(% style="color:blue" %)**User Name: root**
208 208  
209 -(% style="color:#4f81bd" %)**Password:   dragino**
241 +(% style="color:blue" %)**Password:   dragino**
210 210  
211 211  [[image:image-20230106153501-1.png||height="367" width="894"]]
212 212  
213 213  
214 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
246 +== 2.2  Typical Network Setup ==
215 215  
216 -=== 2.2.1 Select your area frequency ===
248 +=== 2.2.1  Overview ===
217 217  
218 218  
251 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 +
253 +* **WAN Port Internet Mode**
254 +
255 +* **WiFi Client Mode**
256 +
257 +* **Cellular Mode**
258 +
259 +=== 2.2.2  Use WAN port to access Internet ===
260 +
261 +
262 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
263 +
264 +
265 +[[image:image-20230411100633-2.png||height="501" width="935"]]
266 +
267 +
268 +=== 2.2.3  Access the Internet as a WiFi Client ===
269 +
270 +
271 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
272 +
273 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
274 +
275 +[[image:image-20230411095739-1.png||height="264" width="691"]]
276 +
277 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
278 +
279 +
280 +=== 2.2.4  Use built-in 4G modem for internet access ===
281 +
282 +
283 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
284 +
285 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
286 +
287 +
288 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
289 +
290 +First, install the Micro SIM card as below direction
291 +
292 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
293 +
294 +
295 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
296 +
297 +
298 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
299 +
300 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
301 +
302 +
303 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 +
305 +
306 +=== 2.2.5  Check Internet connection ===
307 +
308 +
309 +In the **home** page, we can check the Internet connection.
310 +
311 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 +
315 +[[image:image-20230411101534-3.png||height="544" width="942"]]
316 +
317 +
318 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 +
320 +=== 2.3.1 Select your area frequency ===
321 +
322 +
219 219  (((
220 220  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
221 221  
... ... @@ -225,7 +225,7 @@
225 225  [[image:image-20220622103332-9.png||height="485" width="938"]]
226 226  
227 227  
228 -=== 2.2.2 Get the only gateway EUI ===
332 +=== 2.3.2 Get the only gateway EUI ===
229 229  
230 230  
231 231  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -249,7 +249,7 @@
249 249  [[image:image-20220622103956-12.png]]
250 250  
251 251  
252 -== 2.2.3 Register the gateway to The Things Network ==
356 +=== 2.3.3 Register the gateway to The Things Network ===
253 253  
254 254  
255 255  **Login to The Things Network**
... ... @@ -270,7 +270,7 @@
270 270  == 3.1 Home ==
271 271  
272 272  
273 -//Shows the system running status~://
377 +Shows the system running status:
274 274  
275 275  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
276 276  
... ... @@ -280,15 +280,15 @@
280 280  === 3.2.1 LoRa ~-~-> LoRa ===
281 281  
282 282  
283 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
387 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
284 284  
285 -//Different LPS8v2 hardware versions can support different frequency ranges~://
389 +Different LPS8v2 hardware versions can support different frequency ranges:
286 286  
287 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
288 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
391 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
289 289  
290 290  (% class="wikigeneratedid" %)
291 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
395 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
292 292  
293 293  
294 294  (% class="wikigeneratedid" %)
... ... @@ -305,7 +305,7 @@
305 305  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
306 306  
307 307  
308 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
412 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
309 309  
310 310  
311 311  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -314,7 +314,7 @@
314 314  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
315 315  
316 316  
317 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
421 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
318 318  
319 319  
320 320  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -329,8 +329,9 @@
329 329  
330 330  === 3.4.1 Network ~-~-> WiFi ===
331 331  
436 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
332 332  
333 -[[image:image-20220616114756-4.png||height="251" width="669"]]
438 +[[image:image-20230619095946-1.png||height="332" width="827"]]
334 334  
335 335  
336 336  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -339,12 +339,34 @@
339 339  [[image:image-20220820134112-2.png||height="539" width="668"]]
340 340  
341 341  
342 -=== 3.4.3 Network ~-~-> Firewall ===
447 +=== 3.4.3 Network ~-~-> Network ===
343 343  
344 344  
345 -[[image:image-20220616115351-6.png||height="244" width="661"]]
450 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
346 346  
452 +[[image:image-20230214093657-2.png||height="333" width="858"]]
347 347  
454 +
455 +=== 3.4.4 Network ~-~-> Cellular ===
456 +
457 +
458 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
459 +
460 +(% style="color:red" %)**Note: APN cannot be empty.**
461 +
462 +[[image:image-20230228115126-1.png]]
463 +
464 +
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
466 +
467 +[[image:image-20230228115535-2.png||height="478" width="888"]]
468 +
469 +
470 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 +
472 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 +
474 +
348 348  == 3.5 System ==
349 349  
350 350  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -352,27 +352,29 @@
352 352  
353 353  Shows the system info:
354 354  
355 -[[image:image-20220917144512-5.png||height="618" width="853"]]
482 +[[image:image-20231031162854-1.png]]
356 356  
357 357  
358 358  === 3.5.2 System ~-~-> System General ===
359 359  
360 360  
361 -In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
488 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
362 362  
363 -[[image:image-20230107084158-1.png||height="543" width="844"]]
490 +In addition, Users can customize the FallBack IP address.
364 364  
492 +[[image:image-20230214094058-3.png]]
365 365  
494 +
366 366  === 3.5.3 System ~-~-> Backup/Restore ===
367 367  
368 368  
369 -[[image:image-20220917144725-6.png||height="208" width="869"]]
498 +[[image:image-20231031162927-2.png]]
370 370  
371 371  
372 372  === 3.5.4 System ~-~-> Remoteit ===
373 373  
374 374  
375 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
504 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
376 376  
377 377  
378 378  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -380,81 +380,166 @@
380 380  [[image:image-20221230092303-2.png]]
381 381  
382 382  
512 +=== 3.5.5 System ~-~-> Package Management ===
513 +
514 +
515 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
516 +
517 +[[image:image-20230214094316-4.png]]
518 +
519 +
383 383  = 4. Build-in Server =
384 384  
522 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
385 385  
386 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
387 387  
525 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
388 388  
389 -[[image:image-20220820115644-1.png||height="217" width="778"]]
527 +[[image:image-20231106180816-4.png||height="416" width="896"]]
390 390  
529 +[[image:image-20231201165904-1.png||height="466" width="899"]]
391 391  
392 -(% style="color:red" %)**Note:**
531 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
393 393  
394 - **Path**: System ~-~-> Built-in Server
533 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
395 395  
396 396  
397 -**Troubleshooting:**
398 398  
537 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
399 399  
400 -**~ 1. URL does not jump properly**
401 401  
402 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
540 +[[image:image-20230616175558-7.png||height="362" width="894"]]
403 403  
404 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 +[[image:image-20231201170355-2.png||height="536" width="899"]]
405 405  
544 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
406 406  
407 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
408 408  
409 409  
410 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
548 +== **3). Troubleshooting:** ==
411 411  
412 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
413 413  
551 +* (((
552 +=== ** If the URL does not jump properly.** ===
553 +)))
414 414  
415 -Login account:
555 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
416 416  
417 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
557 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
418 418  
419 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
420 420  
560 +* (((
561 +=== ** How to install InfluxDB, Garfana.** ===
562 +)))
421 421  
422 -[[image:image-20220725171719-1.png||height="570" width="769"]]
564 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
423 423  
424 424  
425 -== 4.2 Application Server ~-~- Node-Red ==
567 +* (((
568 +=== ** How to upgrade the gateway node.js to the latest version.** ===
569 +)))
426 426  
571 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
427 427  
428 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
429 429  
574 +* (((
575 +=== ** How to batch register device on the built-in Chirpstack network server** ===
576 +)))
430 430  
431 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
578 + The user can register devices in batch on the gateway Web UI, see [[Batch Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
432 432  
433 433  
434 -[[image:image-20220725172124-3.png||height="610" width="843"]]
581 +* (((
582 +=== ** Why my gateway is not Chirpstack?** ===
583 +)))
435 435  
585 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
436 436  
437 437  
438 -=== **Using Node-Red, InfluxDB and Grafana** ===
588 +* (((
589 +=== ** How to disable the built-in server** ===
590 +)))
439 439  
440 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
592 +(% class="box infomessage" %)
593 +(((
594 +Use the following commands to start and stop the TTNv3 service:**     **
441 441  
596 +**# start**
597 +systemctl start ttnstack
442 442  
443 -the users can refer to this link to install them.
599 +**# stop**
600 +systemctl stop ttnstack
444 444  
445 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
602 +**# enable**
603 +systemctl enable ttnstack
446 446  
605 +**#disable**
606 +systemctl disable ttnstack
607 +)))
447 447  
448 -= 5. How users can access LPS8v2 using serial USB =
609 +(% class="box infomessage" %)
610 +(((
611 +Use the following commands to start and stop the Node-Red service:
449 449  
613 +**# start**
614 +systemctl start nodered
450 450  
451 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
616 +**# stop**
617 +systemctl stop nodered
452 452  
619 +**# enable**
620 +systemctl enable nodered
453 453  
454 -Port 1 of the UART on the LPS8v2 is GND
622 +**#disable**
623 +systemctl disable nodered
624 +)))
455 455  
626 +
627 +* (((
628 +=== ** How to choose the Chirpstack server frequency SubBand** ===
629 +)))
630 +
631 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
632 +
633 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
634 +
635 +[[image:image-20230602140406-3.png||height="480" width="918"]]
636 +
637 +
638 +When the configuration is complete, click** "Save&Apply"**.
639 +
640 +
641 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
642 +
643 +[[image:image-20230602143122-4.png||height="511" width="983"]]
644 +
645 +
646 += 5. Watch Dog =
647 +
648 +
649 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
650 +
651 +The uses can be via the below method to enable Watch Dog:
652 +
653 +
456 456  (% class="box infomessage" %)
457 457  (((
656 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
657 +)))
658 +
659 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
660 +
661 +
662 +
663 += 6. How users can access LPS8-V2 using serial USB =
664 +
665 +
666 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
667 +
668 +Port 1 of the UART on the LPS8-V2 is GND
669 +
670 +(% class="box infomessage" %)
671 +(((
458 458  **TXD  <~-~--> UART RXD (Gray line)**
459 459  
460 460  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -462,12 +462,10 @@
462 462  **GND <~-~--> GND (Black line)**
463 463  )))
464 464  
465 -
466 466  **LPS8v2 UART connection photo**
467 467  
468 -[[image:image-20220804163015-1.png||height="621" width="466"]]
681 +[[image:image-20230421094319-2.png||height="351" width="392"]]
469 469  
470 -
471 471  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
472 472  
473 473  
... ... @@ -477,114 +477,211 @@
477 477  [[image:image-20220804164747-2.png||height="622" width="594"]]
478 478  
479 479  
480 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
692 += 7. OTA System Update =
481 481  
482 482  
483 -== **Step 1: Configure Frequency Band** ==
695 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
484 484  
485 485  
486 -//Each country has a requirement for frequency region. Choose the right one for your area.//
698 +== 7.1 Auto-update method ==
487 487  
488 -[[image:image-20220905164308-1.png]]
489 489  
701 +The default, each gateway will enable the auto-update function.
490 490  
703 +this function will be triggered every boot and every midnight.
491 491  
492 -== **Step 2: Configure the forward address** ==
493 493  
706 +Users can enable/disable it via Web Page
494 494  
495 -**Select one of the servers to configure.**
708 +[[image:image-20230607094447-2.png]]
496 496  
497 -**For example:**
498 498  
499 -[[image:image-20220905164847-2.png]]
711 +== 7.2 Manual upgrade method ==
500 500  
501 501  
714 +1). Using the Linux command to upgrade the system
502 502  
503 -== **Step 3: Download and Install the Helium-gateway-rs** ==
504 504  
717 +(% class="box infomessage" %)
718 +(((
719 +**apt update && apt install *dragino***
720 +)))
505 505  
506 -**Access the gateway CLI via SSH.**
507 507  
508 -[[image:image-20220905165222-3.png]]
723 +2). Upgrade the system via the Web page button of "Manual Update"
509 509  
510 510  
511 -**Download gateway-rs.**
726 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
512 512  
513 -[[image:image-20220905165715-5.png]]
728 +[[image:image-20230607093849-1.png]]
514 514  
730 +
731 +
732 += 8. FAQ =
733 +
734 +== 8.1 How to change Hostname ==
735 +
736 +
737 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
738 +
515 515  (% class="box infomessage" %)
516 516  (((
517 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
741 +hostnamectl set-hostname dragino-123456
518 518  )))
519 519  
744 +[[image:image-20230517102429-1.png]]
520 520  
521 -**Install gateway-rs.**
746 +After the configuration is complete, run "reboot" to restart the gateway.
522 522  
523 -[[image:image-20220905165917-7.png]]
524 524  
749 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
750 +
751 +
752 +Migrate guide:
753 +
754 +To stabilize the completion of the migration, The users can migrate in one of the following ways
755 +
756 +**Method 1. Using the Linux shell, **
757 +
758 +**Method 2. Flash a new image with the Chirpstack**
759 +
760 +
761 +
762 +=== Method 1: Using the Linux shell ===
763 +
525 525  (% class="box infomessage" %)
526 526  (((
527 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
766 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
528 528  )))
529 529  
530 530  
531 -**Modify configuration.**
532 532  
771 +=== Method 2: Flash a new image ===
533 533  
534 -[[image:image-20220905173847-12.png]]
773 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
535 535  
536 536  
776 +
777 +== 8.3 How to reduce the 4g data consumed ==
778 +
779 +
780 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
781 +
782 +[[image:image-20230719100239-1.png||height="724" width="994"]]
783 +
784 +
785 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
786 +
787 +[[image:image-20230719100332-2.png]]
788 +
789 +
790 +3. Disable the auto-update:
791 +
792 +[[image:image-20230719100419-3.png||height="458" width="995"]]
793 +
794 +
795 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
796 +
797 +
537 537  (% class="box infomessage" %)
538 538  (((
539 -**region=<Enter regional parameters> \
540 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
541 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
800 +apt update && apt install helium-gateway
542 542  )))
543 543  
544 544  
545 -**Restart the helium_gateway**
804 +== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
546 546  
547 -[[image:image-20220905170920-9.png]]
548 548  
807 +By default, the LPS8v2's built-in server is ChirpStack v4,
549 549  
809 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
810 +
811 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
812 +
813 +
814 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
815 +
816 +
817 +== 8.6 How do I view gateway logs ==
818 +
819 +=== 8.6.1 LoRaWAN Log: ===
820 +
821 +==== Semtech UDP Log : ====
822 +
823 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
824 +
825 +[[image:image-20231017112115-2.png||height="611" width="821"]]
826 +
827 +
828 +==== Station Log: ====
829 +
830 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
831 +
832 +[[image:image-20231017111606-1.png||height="622" width="821"]]
833 +
834 +
835 +=== 8.6.2  4G Log ===
836 +
837 +The user needs to access the Linux console of the gateway and enter the following command:
838 +
550 550  (% class="box infomessage" %)
551 551  (((
552 -**systemctl restart helium_gateway**
841 +cat /var/log/qmilog.txt
553 553  )))
554 554  
844 +[[image:image-20231017114417-3.png||height="543" width="679"]]
555 555  
556 -**Check the helium_gateway Log：**
557 557  
558 -[[image:image-20220905173952-13.png]]
847 +=== 8.6.3 Dmesg Log ===
559 559  
849 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
560 560  
851 +[[image:image-20231017115330-5.png||height="565" width="740"]]
852 +
853 +
854 +=== 8.6.4 Record Log ===
855 +
856 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
857 +
858 +[[image:image-20231017115124-4.png||height="215" width="880"]]
859 +
860 +
861 +=== 8.6.5 View gateway logs via Linux Command ===
862 +
863 +**Semtech UDP Log :**
864 +
561 561  (% class="box infomessage" %)
562 562  (((
563 -**journalctl -u helium_gateway -f**
867 +**journalctl -u draginofwd -f**
564 564  )))
565 565  
870 +[[image:image-20231207144627-1.png||height="371" width="1017"]]
566 566  
567 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
568 568  
569 -where the helium gateway log is shown:
873 +**Station Log:**
570 570  
571 -[[image:image-20220905174534-14.png]]
875 +(% class="box infomessage" %)
876 +(((
877 +**tail -f /var/log/station.log **
878 +)))
572 572  
880 +[[image:image-20231207144758-2.png||height="132" width="1022"]]
573 573  
574 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
575 575  
883 +**Dmesg Log:**
576 576  
577 -= 7. OTA System Update =
885 +(% class="box infomessage" %)
886 +(((
887 +**dmesg**
888 +)))
578 578  
890 +[[image:image-20231207145210-3.png||height="310" width="1021"]]
579 579  
580 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
892 += 9. Trouble Shooting =
581 581  
894 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
582 582  
583 -= 8. Trouble Shooting =
584 584  
585 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
586 -
587 -
588 588  [[image:image-20220920135918-1.png]]
589 589  
590 590  
... ... @@ -600,20 +600,89 @@
600 600  [[image:image-20220920141936-2.png]]
601 601  
602 602  
603 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
912 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
604 604  
605 605  
915 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
916 +
917 +[[image:image-20230508171607-1.png]]
918 +
919 +
920 +== 9.3  Fallback IP does not work, how can users check ==
921 +
922 +
923 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
924 +
925 +
926 +**1.Check whether the configuration is correct**
927 +
928 +Run the CMD command to ipconfig and ping 172.31.255.254.
929 +
930 +If this fails, the user needs to reconfigure.
931 +
932 +[[image:image-20230413170224-3.png||height="433" width="707"]]
933 +
934 +[[image:image-20230413170246-4.png]]
935 +
936 +
937 +**2. Check whether the firewall is disabled**
938 +
939 +If the firewall is not down, this will affect access to the gateway.
940 +
941 +
942 +== 9.4  Click "Manual_Update", why there is no response? ==
943 +
944 +
945 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
946 +
947 +
948 +[[image:image-20230527090555-3.png||height="660" width="832"]]
949 +
950 +
951 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
952 +
953 +
954 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
955 +
956 +
957 +(% class="box infomessage" %)
606 606  (((
607 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
959 +apt update && apt install *dragino*
960 +
961 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
608 608  )))
609 609  
964 +
965 +== 9.6  How to reset the built-in server ==
966 +
967 +
968 +**1) Build-in The Things Network**
969 +
970 +Refer to this link to delete the Built-in server's device.
971 +
972 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
973 +
974 +
975 +**2) Build-in Chirpstack**
976 +
977 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
978 +
979 +[[image:image-20231106180846-5.png||height="310" width="668"]]
980 +
981 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
982 +
983 +
610 610  (((
611 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
985 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
986 +)))
612 612  
988 +(((
989 +With your question as detailed as possible. We will reply and help you in the shortest.
613 613  
614 -= 10. Reference =
615 615  
992 += 11. Reference =
616 616  
994 +
617 617  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
618 618  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
619 619  
... ... @@ -620,7 +620,7 @@
620 620  
621 621  )))
622 622  
623 -= 11. Order Info =
1001 += 12. Order Info =
624 624  
625 625  
626 626  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -628,23 +628,31 @@
628 628  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
629 629  
630 630  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1009 +
631 631  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1011 +
632 632  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1013 +
633 633  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1015 +
634 634  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1017 +
635 635  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
636 636  
637 637  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
638 638  
639 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
640 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
641 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
642 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
1022 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
643 643  
1024 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1025 +
1026 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1027 +
1028 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1029 +
644 644  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
645 645  
646 646  
647 -= 12. Manufacturer Info =
1033 += 13. Manufacturer Info =
648 648  
649 649  
650 650  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -654,7 +654,7 @@
654 654  LongCheng Street, LongGang District ; Shenzhen 518116,China
655 655  
656 656  
657 -= 13. FCC Warning =
1043 += 14. FCC Warning =
658 658  
659 659  
660 660  (((
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content
image-20231207144627-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +182.9 KB
Content
image-20231207144758-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +51.0 KB
Content
image-20231207145210-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0