Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 132.1 >
edited by Kilight Cao
on 2023/01/07 08:59
To version < 69.12 >
edited by Xiaoling
on 2022/07/28 17:54
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -52,6 +52,8 @@
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
53 +
54 +
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,6 +58,8 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 +
62 +
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 63  * Work Temperature: -20 ~~ 65°C
... ... @@ -66,9 +66,11 @@
66 66  
67 67  
68 68  
69 -== 1.3 Features ==
70 70  
71 71  
73 +== **1.3 Features** ==
74 +
75 +
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -86,65 +86,55 @@
86 86  
87 87  
88 88  
89 -== 1.4 Block Diagram ==
90 90  
91 91  
95 +== **1.4 Block Diagram** ==
92 92  
93 -== 1.5 LED Indicators ==
94 94  
95 95  
99 +== **1.5 LED Indicators** ==
100 +
101 +
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 99  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
107 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
109 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
111 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
113 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
108 108  
109 109  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
117 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
112 112  
113 113  
114 -== 1.6 Button Intruction ==
115 115  
121 += **2. Quick Start** =
116 116  
117 -LPS8-V2 has a black toggle button, which is:
118 118  
119 -
120 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 -
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 -
124 -
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 -
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 -
129 -
130 -= 2. Quick Start =
131 -
132 -
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
139 139  
140 -== 2.1.1 connect the network ==
130 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
141 141  
142 142  
133 +== **2.1.1 connect the network.** ==
134 +
135 +=== ===
136 +
143 143  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
144 144  
145 145  
146 146  (((
147 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
141 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  )))
149 149  
150 150  (((
... ... @@ -161,66 +161,66 @@
161 161  [[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 163  
164 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
158 +(((
159 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
160 +)))
165 165  
166 166  
167 -[[image:image-20220622102702-6.png]]
168 168  
164 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
169 169  
166 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
170 170  
171 -**Wi-Fi configuration successful**
168 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
172 172  
170 +[[image:image-20220622101433-4.png]]
173 173  
174 -[[image:image-20220622102847-7.png]]
175 175  
173 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
176 176  
177 -[[image:image-20220622102901-8.png||height="476" width="938"]]
178 178  
176 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
179 179  
180 -== 2.1.2 Access Configure Web UI ==
181 181  
179 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
182 182  
183 -**Web Interface**
184 184  
185 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
182 +[[image:image-20220622102702-6.png]]
186 186  
187 187  
188 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
189 189  
190 -You will see the login interface of LPS8-V2 as shown below.
186 +**Wi-Fi configuration successful**
191 191  
192 -The account details for Web Login are:
193 193  
194 -(% style="color:#4f81bd" %)**User Name: root**
189 +[[image:image-20220622102847-7.png]]
195 195  
196 -(% style="color:#4f81bd" %)**Password:   dragino**
197 197  
198 -[[image:image-20230106153501-1.png||height="367" width="894"]]
192 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
199 199  
200 200  
201 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
202 202  
203 -=== 2.2.1 Select your area frequency ===
196 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
204 204  
205 205  
199 +=== **2.2.1 Select your area frequency** ===
200 +
201 +
206 206  (((
207 207  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
208 -
209 -
210 210  )))
211 211  
212 -[[image:image-20220622103332-9.png||height="485" width="938"]]
206 +[[image:image-20220622103332-9.png]]
213 213  
214 214  
215 -=== 2.2.2 Get the only gateway EUI ===
216 216  
210 +=== **2.2.2 Get the only gateway EUI** ===
217 217  
212 +
218 218  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
219 219  
215 +[[image:image-20220622103355-10.png]]
220 220  
221 -[[image:image-20220622103355-10.png||height="698" width="949"]]
222 222  
223 -
224 224  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
225 225  
226 226  
... ... @@ -236,6 +236,7 @@
236 236  [[image:image-20220622103956-12.png]]
237 237  
238 238  
233 +
239 239  == 2.2.3 Register the gateway to The Things Network ==
240 240  
241 241  
... ... @@ -252,19 +252,20 @@
252 252  **Get it online**
253 253  
254 254  
255 -= 3. Web Configure Pages =
256 256  
257 -== 3.1 Home ==
251 += **3. Web Configure Pages** =
258 258  
259 259  
254 +== **3.1 Home** ==
255 +
256 +
260 260  //Shows the system running status~://
261 261  
262 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
263 263  
260 +== **3.2 LoRa Settings** ==
264 264  
265 -== 3.2 LoRa Settings ==
266 266  
267 -=== 3.2.1 LoRa ~-~-> LoRa ===
263 +=== **3.2.1 LoRa ~-~-> LoRa** ===
268 268  
269 269  
270 270  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -271,131 +271,97 @@
271 271  
272 272  //Different LPS8v2 hardware versions can support different frequency ranges~://
273 273  
274 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
270 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
275 275  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
276 276  
277 277  (% class="wikigeneratedid" %)
278 278  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
279 279  
280 -
281 281  (% class="wikigeneratedid" %)
282 282  [[image:image-20220616110739-1.png||height="372" width="682"]]
283 283  
284 284  
285 285  (((
286 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
281 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
287 287  )))
288 288  
289 289  
290 -== 3.3 LoRaWAN Settings ==
291 291  
292 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
286 +== **3.3 LoRaWAN Settings** ==
293 293  
294 294  
295 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
289 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
296 296  
297 297  
292 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
293 +
298 298  [[image:image-20220616111932-2.png||height="516" width="672"]]
299 299  
300 300  
301 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
302 302  
298 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
303 303  
300 +
304 304  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
305 305  
306 -
307 307  [[image:image-20220616113246-3.png||height="396" width="672"]]
308 308  
309 309  
310 310  (((
311 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
307 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
312 312  )))
313 313  
314 314  
315 -== 3.4 Network Settings ==
316 316  
317 -=== 3.4.1 Network ~-~-> WiFi ===
312 +== **3.4 Network Settings** ==
318 318  
319 319  
320 -[[image:image-20220616114756-4.png||height="251" width="669"]]
315 +=== **3.4.1 Network ~-~-> WiFi** ===
321 321  
322 322  
323 -=== 3.4.2 Network ~-~-> System Status ===
318 +[[image:image-20220616114756-4.png||height="251" width="669"]]
324 324  
325 325  
326 -[[image:image-20220820134112-2.png||height="539" width="668"]]
327 327  
322 +=== **3.4.2 Network ~-~-> System Status** ===
328 328  
329 -=== 3.4.3 Network ~-~-> Firewall ===
330 330  
325 +[[image:image-20220616115229-5.png||height="548" width="665"]]
331 331  
332 -[[image:image-20220616115351-6.png||height="244" width="661"]]
333 333  
334 334  
335 -== 3.5 System ==
329 +=== **3.4.3 Network ~-~-> Firewall** ===
336 336  
337 -=== 3.5.1 System ~-~-> System Overview ===
338 338  
332 +[[image:image-20220616115351-6.png||height="244" width="661"]]
339 339  
340 -Shows the system info:
341 341  
342 -[[image:image-20220917144512-5.png||height="618" width="853"]]
343 343  
336 +== **3.5 System** ==
344 344  
345 -=== 3.5.2 System ~-~-> System General ===
346 346  
339 +=== **3.5.1  System ~-~-> System Overview** ===
347 347  
348 -In the System-> System General interface, Users can customize the configuration System Password.
349 349  
350 -[[image:image-20230106154302-2.png||height="345" width="868"]]
342 +Shows the system info:
351 351  
352 352  
353 -=== 3.5.3 System ~-~-> Backup/Restore ===
354 354  
346 +=== **3.5.2 System ~-~-> Backup/Restore** ===
355 355  
356 -[[image:image-20220917144725-6.png||height="208" width="869"]]
357 357  
349 +[[image:image-20220616115808-7.png||height="194" width="649"]]
358 358  
359 -=== 3.5.4 System ~-~-> Remoteit ===
360 360  
361 361  
362 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
353 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
363 363  
364 364  
365 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
356 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
366 366  
367 -[[image:image-20221230092303-2.png]]
358 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
368 368  
369 369  
370 -= 4. Build-in Server =
371 -
372 -
373 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
374 -
375 -
376 -[[image:image-20220820115644-1.png||height="217" width="778"]]
377 -
378 -
379 -(% style="color:red" %)**Note:**
380 -
381 - **Path**: System ~-~-> Built-in Server
382 -
383 -
384 -**Troubleshooting:**
385 -
386 -
387 -**~ 1. URL does not jump properly**
388 -
389 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
390 -
391 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
392 -
393 -
394 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
395 -
396 -
397 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
398 -
399 399  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
400 400  
401 401  
... ... @@ -409,187 +409,61 @@
409 409  [[image:image-20220725171719-1.png||height="570" width="769"]]
410 410  
411 411  
412 -== 4.2 Application Server ~-~- Node-Red ==
413 -
414 -
415 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
416 -
417 -
418 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
419 -
420 -
421 -[[image:image-20220725172124-3.png||height="610" width="843"]]
422 -
423 -
424 -
425 -=== **Using Node-Red, InfluxDB and Grafana** ===
426 -
427 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
428 -
429 -
430 -the users can refer to this link to install them.
431 -
432 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
433 -
434 -
435 -= 5. How users can access LPS8v2 using serial USB =
436 -
437 -
438 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
439 -
440 -
441 -Port 1 of the UART on the LPS8v2 is GND
442 -
443 -(% class="box infomessage" %)
444 444  (((
445 -**TXD  <~-~--> UART RXD (Gray line)**
446 -
447 -**RXD  <~-~--> UART TXD (White line)**
448 -
449 -**GND <~-~--> GND (Black line)**
375 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
376 + You can complete the installation manually with the following command.**
450 450  )))
451 451  
452 452  
453 -**LPS8v2 UART connection photo**
454 -
455 -[[image:image-20220804163015-1.png||height="621" width="466"]]
456 -
457 -
458 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
459 -
460 -
461 -[[image:image-20220804164928-3.png||height="320" width="332"]]
462 -
463 -
464 -[[image:image-20220804164747-2.png||height="622" width="594"]]
465 -
466 -
467 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
468 -
469 -
470 -== **Step 1: Configure Frequency Band** ==
471 -
472 -
473 -//Each country has a requirement for frequency region. Choose the right one for your area.//
474 -
475 -[[image:image-20220905164308-1.png]]
476 -
477 -
478 -
479 -== **Step 2: Configure the forward address** ==
480 -
481 -
482 -**Select one of the servers to configure.**
483 -
484 -**For example:**
485 -
486 -[[image:image-20220905164847-2.png]]
487 -
488 -
489 -
490 -== **Step 3: Download and Install the Helium-gateway-rs** ==
491 -
492 -
493 -**Access the gateway CLI via SSH.**
494 -
495 -[[image:image-20220905165222-3.png]]
496 -
497 -
498 -**Download gateway-rs.**
499 -
500 -[[image:image-20220905165715-5.png]]
501 -
502 502  (% class="box infomessage" %)
503 503  (((
504 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
382 +(((
383 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
505 505  )))
506 506  
507 -
508 -**Install gateway-rs.**
509 -
510 -[[image:image-20220905165917-7.png]]
511 -
512 -(% class="box infomessage" %)
513 513  (((
514 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
387 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
515 515  )))
389 +)))
516 516  
517 517  
518 -**Modify configuration.**
519 519  
393 += **5. Build-in Application Server ~-~- Node-Red** =
520 520  
521 -[[image:image-20220905173847-12.png]]
522 522  
396 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
523 523  
524 -(% class="box infomessage" %)
525 -(((
526 -**region=<Enter regional parameters> \
527 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
528 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
529 -)))
398 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
530 530  
531 531  
532 -**Restart the helium_gateway**
401 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
533 533  
534 -[[image:image-20220905170920-9.png]]
535 535  
404 +[[image:image-20220725172124-3.png||height="610" width="843"]]
536 536  
537 -(% class="box infomessage" %)
406 +
538 538  (((
539 -**systemctl restart helium_gateway**
408 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
409 + You can complete the installation manually with the following command.**
540 540  )))
541 541  
542 542  
543 -**Check the helium_gateway Log：**
544 544  
545 -[[image:image-20220905173952-13.png]]
546 -
547 -
548 548  (% class="box infomessage" %)
549 549  (((
550 -**journalctl -u helium_gateway -f**
416 +(((
417 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
418 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
551 551  )))
420 +)))
552 552  
422 +[[image:image-20220728102000-1.png]]
553 553  
554 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
555 555  
556 -where the helium gateway log is shown:
557 557  
558 -[[image:image-20220905174534-14.png]]
426 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
559 559  
560 560  
561 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
562 -
563 -
564 -= 7. OTA System Update =
565 -
566 -
567 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
568 -
569 -
570 -= 8. Trouble Shooting =
571 -
572 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
573 -
574 -
575 -[[image:image-20220920135918-1.png]]
576 -
577 -
578 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
579 -
580 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
581 -
582 -
583 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
584 -
585 -**Click the update URL button to configure the URL with the current eth port address.**
586 -
587 -[[image:image-20220920141936-2.png]]
588 -
589 -
590 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
591 -
592 -
593 593  (((
594 594  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
595 595  )))
... ... @@ -598,17 +598,17 @@
598 598  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
599 599  
600 600  
601 -= 10. Reference =
602 602  
438 += **11 Reference** =
603 603  
440 +
604 604  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
605 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
606 606  
607 607  
608 608  
609 609  )))
610 610  
611 -= 11. Order Info =
447 += **12. Order Info** =
612 612  
613 613  
614 614  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -622,6 +622,7 @@
622 622  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
623 623  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
624 624  
461 +
625 625  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
626 626  
627 627  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -632,9 +632,10 @@
632 632  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
633 633  
634 634  
635 -= 12. Manufacturer Info =
636 636  
473 += **13. Manufacturer Info** =
637 637  
475 +
638 638  **Shenzhen Dragino Technology Development co. LTD**
639 639  
640 640  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -642,9 +642,10 @@
642 642  LongCheng Street, LongGang District ; Shenzhen 518116,China
643 643  
644 644  
645 -= 13. FCC Warning =
646 646  
484 += **14. FCC Warning** =
647 647  
486 +
648 648  (((
649 649  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
650 650  )))
... ... @@ -673,7 +673,5 @@
673 673  
674 674  (((
675 675  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
676 -
677 -
678 678  )))
679 679  )))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -33.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0