Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 128.2 >
edited by Xiaoling
on 2023/01/06 17:19
To version < 233.1 >
edited by Xiaoye
on 2023/07/19 10:04
>
Change comment: Uploaded new attachment "image-20230719100419-3.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,15 +57,15 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 -
68 -
69 69  == 1.3 Features ==
70 70  
71 71  
... ... @@ -81,37 +81,31 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 +== 1.4 LED Indicators ==
87 87  
88 88  
89 -== 1.4 Block Diagram ==
90 -
91 -
92 -
93 -== 1.5 LED Indicators ==
94 -
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
108 108  
109 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
112 112  
113 113  
114 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
115 115  
116 116  
117 117  LPS8-V2 has a black toggle button, which is:
... ... @@ -119,12 +119,12 @@
119 119  
120 120  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 121  
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
123 123  
124 124  
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
126 126  
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
128 128  
129 129  
130 130  = 2. Quick Start =
... ... @@ -135,14 +135,29 @@
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
132 +== 2.1 Access and Configure LPS8-V2 ==
139 139  
140 -== 2.1.1 connect the network ==
134 +=== 2.1.1 Find IP address of LPS8-V2 ===
141 141  
142 142  
143 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
144 144  
145 145  
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
141 +
142 +(% style="background-color:yellow" %)**dragino+dragino**
143 +
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 +
146 +[[image:image-20230527084515-1.png]]
147 +
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +
150 +
151 +
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 +
154 +
146 146  (((
147 147  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  )))
... ... @@ -155,9 +155,40 @@
155 155  
156 156  
157 157  
158 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
159 159  
160 160  
170 +[[image:image-20230107084650-2.png||height="310" width="839"]]
171 +
172 +
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
174 +
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 +
177 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
178 +
179 +
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
181 +
182 +
183 +As in the below photo:
184 +
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 +
187 +
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 +
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 +
192 +
193 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 +
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 +
197 +
198 +
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
161 161  [[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 163  
... ... @@ -177,7 +177,7 @@
177 177  [[image:image-20220622102901-8.png||height="476" width="938"]]
178 178  
179 179  
180 -== 2.1.2 Access Configure Web UI ==
220 +=== 2.1.2 Access Configure Web UI ===
181 181  
182 182  
183 183  **Web Interface**
... ... @@ -185,24 +185,96 @@
185 185  Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186 186  
187 187  
188 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
228 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
189 189  
190 190  You will see the login interface of LPS8-V2 as shown below.
191 191  
192 192  The account details for Web Login are:
193 193  
194 -(% style="color:#4f81bd" %)**User Name: root**
234 +(% style="color:blue" %)**User Name: root**
195 195  
196 -(% style="color:#4f81bd" %)**Password:   dragino**
236 +(% style="color:blue" %)**Password:   dragino**
197 197  
198 198  [[image:image-20230106153501-1.png||height="367" width="894"]]
199 199  
200 200  
201 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
241 +== 2.2  Typical Network Setup ==
202 202  
203 -=== 2.2.1 Select your area frequency ===
243 +=== 2.2.1  Overview ===
204 204  
205 205  
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
206 206  (((
207 207  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
208 208  
... ... @@ -212,7 +212,7 @@
212 212  [[image:image-20220622103332-9.png||height="485" width="938"]]
213 213  
214 214  
215 -=== 2.2.2 Get the only gateway EUI ===
327 +=== 2.3.2 Get the only gateway EUI ===
216 216  
217 217  
218 218  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -236,7 +236,7 @@
236 236  [[image:image-20220622103956-12.png]]
237 237  
238 238  
239 -== 2.2.3 Register the gateway to The Things Network ==
351 +=== 2.3.3 Register the gateway to The Things Network ===
240 240  
241 241  
242 242  **Login to The Things Network**
... ... @@ -257,7 +257,7 @@
257 257  == 3.1 Home ==
258 258  
259 259  
260 -//Shows the system running status~://
372 +Shows the system running status:
261 261  
262 262  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
263 263  
... ... @@ -267,15 +267,15 @@
267 267  === 3.2.1 LoRa ~-~-> LoRa ===
268 268  
269 269  
270 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
271 271  
272 -//Different LPS8v2 hardware versions can support different frequency ranges~://
384 +Different LPS8v2 hardware versions can support different frequency ranges:
273 273  
274 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
275 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
276 276  
277 277  (% class="wikigeneratedid" %)
278 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
279 279  
280 280  
281 281  (% class="wikigeneratedid" %)
... ... @@ -292,7 +292,7 @@
292 292  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
293 293  
294 294  
295 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
296 296  
297 297  
298 298  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -301,7 +301,7 @@
301 301  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
302 302  
303 303  
304 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
305 305  
306 306  
307 307  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -316,8 +316,9 @@
316 316  
317 317  === 3.4.1 Network ~-~-> WiFi ===
318 318  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
319 319  
320 -[[image:image-20220616114756-4.png||height="251" width="669"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
321 321  
322 322  
323 323  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -326,12 +326,29 @@
326 326  [[image:image-20220820134112-2.png||height="539" width="668"]]
327 327  
328 328  
329 -=== 3.4.3 Network ~-~-> Firewall ===
442 +=== 3.4.3 Network ~-~-> Network ===
330 330  
331 331  
332 -[[image:image-20220616115351-6.png||height="244" width="661"]]
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
333 333  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
334 334  
449 +
450 +=== 3.4.4 Network ~-~-> Cellular ===
451 +
452 +
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
454 +
455 +(% style="color:red" %)**Note: APN cannot be empty.**
456 +
457 +[[image:image-20230228115126-1.png]]
458 +
459 +
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
461 +
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
463 +
464 +
335 335  == 3.5 System ==
336 336  
337 337  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -345,11 +345,13 @@
345 345  === 3.5.2 System ~-~-> System General ===
346 346  
347 347  
348 -In the System-> System General interface, Users can customize the configuration System Password.
478 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
349 349  
350 -[[image:image-20230106154302-2.png||height="345" width="868"]]
480 +In addition, Users can customize the FallBack IP address.
351 351  
482 +[[image:image-20230214094058-3.png]]
352 352  
484 +
353 353  === 3.5.3 System ~-~-> Backup/Restore ===
354 354  
355 355  
... ... @@ -359,7 +359,7 @@
359 359  === 3.5.4 System ~-~-> Remoteit ===
360 360  
361 361  
362 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
494 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
363 363  
364 364  
365 365  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -367,34 +367,46 @@
367 367  [[image:image-20221230092303-2.png]]
368 368  
369 369  
502 +=== 3.5.5 System ~-~-> Package Management ===
503 +
504 +
505 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 +
507 +[[image:image-20230214094316-4.png]]
508 +
509 +
370 370  = 4. Build-in Server =
371 371  
372 372  
373 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
374 374  
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
375 375  
376 -[[image:image-20220820115644-1.png||height="217" width="778"]]
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
377 377  
378 378  
520 +
379 379  (% style="color:red" %)**Note:**
380 380  
381 - **Path**: System ~-~-> Built-in Server
523 + **Path**: Server ~-~-> Network Server
382 382  
525 + Server ~-~-> Application Server
383 383  
527 +
384 384  **Troubleshooting:**
385 385  
386 386  
387 387  **~ 1. URL does not jump properly**
388 388  
389 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
390 390  
391 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
392 392  
393 393  
394 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
395 395  
396 396  
397 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
398 398  
399 399  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
400 400  
... ... @@ -401,14 +401,25 @@
401 401  
402 402  Login account:
403 403  
404 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 +**Username : ** (% style="background-color:yellow" %)**admin**
405 405  
406 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
407 407  
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
408 408  
409 -[[image:image-20220725171719-1.png||height="570" width="769"]]
410 410  
411 411  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
557 +
558 +
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 +
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +
563 +[[image:image-20230321092456-1.png]]
564 +
565 +
566 +
412 412  == 4.2 Application Server ~-~- Node-Red ==
413 413  
414 414  
... ... @@ -432,146 +432,211 @@
432 432  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
433 433  
434 434  
435 -= 5. How users can access LPS8v2 using serial USB =
590 +=== **Upgrade the node.js** ===
436 436  
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
437 437  
438 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
439 439  
595 +the users can refer to this link to upgrade them.
440 440  
441 -Port 1 of the UART on the LPS8v2 is GND
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
442 442  
599 +
600 +== 4.3 How to disable the built-in server ==
601 +
602 +
603 +Use the following commands to start and stop the TTNv3 service:
604 +
443 443  (% class="box infomessage" %)
444 444  (((
445 -**TXD  <~-~--> UART RXD (Gray line)**
607 +**# start**
608 +systemctl start ttnstack
446 446  
447 -**RXD  <~-~--> UART TXD (White line)**
610 +**# stop**
611 +systemctl stop ttnstack
448 448  
449 -**GND <~-~--> GND (Black line)**
613 +**# enable**
614 +systemctl enable ttnstack
615 +
616 +**#disable**
617 +systemctl disable ttnstack
450 450  )))
451 451  
620 +Use the following commands to start and stop the Node-Red service:
452 452  
453 -**LPS8v2 UART connection photo**
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
454 454  
455 -[[image:image-20220804163015-1.png||height="621" width="466"]]
627 +**# stop**
628 +systemctl stop nodered
456 456  
630 +**# enable**
631 +systemctl enable nodered
457 457  
458 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
633 +**#disable**
634 +systemctl disable nodered
635 +)))
459 459  
460 460  
461 -[[image:image-20220804164928-3.png||height="320" width="332"]]
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
462 462  
463 463  
464 -[[image:image-20220804164747-2.png||height="622" width="594"]]
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
465 465  
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
466 466  
467 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
468 468  
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
469 469  
470 -== **Step 1: Configure Frequency Band** ==
471 471  
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
472 472  
473 -//Each country has a requirement for frequency region. Choose the right one for your area.//
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
474 474  
475 -[[image:image-20220905164308-1.png]]
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
476 476  
477 477  
656 +When the configuration is complete, click** "Save&Apply"**.
478 478  
479 -== **Step 2: Configure the forward address** ==
480 480  
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
481 481  
482 -**Select one of the servers to configure.**
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
483 483  
484 -**For example:**
485 485  
486 -[[image:image-20220905164847-2.png]]
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
487 487  
488 488  
489 489  
490 -== **Step 3: Download and Install the Helium-gateway-rs** ==
668 += 6. How users can access LPS8-V2 using serial USB =
491 491  
492 492  
493 -**Access the gateway CLI via SSH.**
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
494 494  
495 -[[image:image-20220905165222-3.png]]
496 496  
674 +Port 1 of the UART on the LPS8-V2 is GND
497 497  
498 -**Download gateway-rs.**
499 -
500 -[[image:image-20220905165715-5.png]]
501 -
502 502  (% class="box infomessage" %)
503 503  (((
504 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
678 +**TXD  <~-~--> UART RXD (Gray line)**
679 +
680 +**RXD  <~-~--> UART TXD (White line)**
681 +
682 +**GND <~-~--> GND (Black line)**
505 505  )))
506 506  
507 507  
508 -**Install gateway-rs.**
686 +**LPS8v2 UART connection photo**
509 509  
510 -[[image:image-20220905165917-7.png]]
511 511  
512 -(% class="box infomessage" %)
513 -(((
514 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
515 -)))
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
516 516  
691 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
517 517  
518 -**Modify configuration.**
519 519  
694 +[[image:image-20220804164928-3.png||height="320" width="332"]]
520 520  
521 -[[image:image-20220905173847-12.png]]
522 522  
697 +[[image:image-20220804164747-2.png||height="622" width="594"]]
523 523  
524 -(% class="box infomessage" %)
525 -(((
526 -**region=<Enter regional parameters> \
527 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
528 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
529 -)))
530 530  
700 += 7. OTA System Update =
531 531  
532 -**Restart the helium_gateway**
533 533  
534 -[[image:image-20220905170920-9.png]]
703 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
535 535  
536 536  
706 +== 7.1 Auto-update method ==
707 +
708 +
709 +The default, each gateway will enable the auto-update function.
710 +
711 +this function will be triggered every boot and every midnight.
712 +
713 +
714 +Users can enable/disable it via Web Page
715 +
716 +[[image:image-20230607094447-2.png]]
717 +
718 +
719 +== 7.2 Manual upgrade method ==
720 +
721 +
722 +1). Using the Linux command to upgrade the system
723 +
724 +
537 537  (% class="box infomessage" %)
538 538  (((
539 -**systemctl restart helium_gateway**
727 +**apt update && apt install *dragino***
540 540  )))
541 541  
542 542  
543 -**Check the helium_gateway Log：**
731 +2). Upgrade the system via the Web page button of "Manual Update"
544 544  
545 -[[image:image-20220905173952-13.png]]
546 546  
734 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
547 547  
736 +[[image:image-20230607093849-1.png]]
737 +
738 +
739 += 8. FAQ =
740 +
741 +== 8.1 How to change Hostname ==
742 +
743 +
744 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
745 +
548 548  (% class="box infomessage" %)
549 549  (((
550 -**journalctl -u helium_gateway -f**
748 +hostnamectl set-hostname dragino-123456
551 551  )))
552 552  
751 +[[image:image-20230517102429-1.png]]
553 553  
554 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
753 +After the configuration is complete, run "reboot" to restart the gateway.
555 555  
556 -where the helium gateway log is shown:
557 557  
558 -[[image:image-20220905174534-14.png]]
756 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
559 559  
560 560  
561 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
759 +Migrate guide:
562 562  
761 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
563 563  
564 -= 7. OTA System Update =
763 +**2. On the Server ~-~-> Network Server interface, click "Management"**
565 565  
765 +[[image:image-20230616162454-1.png]]
566 566  
567 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
568 568  
768 +**3. Click "Migrate-Chirpstack"**
569 569  
570 -= 8. Trouble Shooting =
770 +[[image:image-20230616162742-2.png]]
571 571  
572 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
573 573  
773 +**4. Strat Install **
574 574  
775 +
776 +Click start Install and wait until the migration succeeds
777 +
778 +[[image:image-20230616162934-3.png]]
779 +
780 +
781 +**5.Migration complete check result**
782 +
783 +[[image:image-20230616174526-4.png||height="706" width="983"]]
784 +
785 +
786 +[[image:image-20230616180004-9.png]]
787 +
788 +
789 +
790 += 9. Trouble Shooting =
791 +
792 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
793 +
794 +
575 575  [[image:image-20220920135918-1.png]]
576 576  
577 577  
... ... @@ -587,28 +587,66 @@
587 587  [[image:image-20220920141936-2.png]]
588 588  
589 589  
590 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
810 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
591 591  
592 592  
813 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
814 +
815 +[[image:image-20230508171607-1.png]]
816 +
817 +
818 +== 9.3  Fallback IP does not work, how can users check ==
819 +
820 +
821 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 +
823 +
824 +**1.Check whether the configuration is correct**
825 +
826 +Run the CMD command to ipconfig and ping 172.31.255.254.
827 +
828 +If this fails, the user needs to reconfigure.
829 +
830 +[[image:image-20230413170224-3.png||height="433" width="707"]]
831 +
832 +[[image:image-20230413170246-4.png]]
833 +
834 +
835 +**2. Check whether the firewall is disabled**
836 +
837 +If the firewall is not down, this will affect access to the gateway.
838 +
839 +
840 +== 9.4  Click "Manual_Update", why there is no response? ==
841 +
842 +
843 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
844 +
845 +
846 +[[image:image-20230527090555-3.png||height="660" width="832"]]
847 +
848 +
849 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
850 +
851 +
593 593  (((
594 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
853 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
595 595  )))
596 596  
597 597  (((
598 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
857 +With your question as detailed as possible. We will reply and help you in the shortest.
599 599  
600 600  
601 -= 10. Reference =
860 += 11. Reference =
602 602  
603 603  
604 604  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
605 605  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
606 606  
607 -
608 608  
609 609  )))
610 610  
611 -= 11. Order Info =
869 += 12. Order Info =
612 612  
613 613  
614 614  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -616,23 +616,31 @@
616 616  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
617 617  
618 618  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
877 +
619 619  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
879 +
620 620  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
881 +
621 621  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
883 +
622 622  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 +
623 623  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
624 624  
625 625  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
626 626  
627 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
628 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
629 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
630 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
890 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
631 631  
892 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
893 +
894 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
895 +
896 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
897 +
632 632  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
633 633  
634 634  
635 -= 12. Manufacturer Info =
901 += 13. Manufacturer Info =
636 636  
637 637  
638 638  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -642,7 +642,7 @@
642 642  LongCheng Street, LongGang District ; Shenzhen 518116,China
643 643  
644 644  
645 -= 13. FCC Warning =
911 += 14. FCC Warning =
646 646  
647 647  
648 648  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0