Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 124.1 >
edited by Kilight Cao
on 2023/01/06 15:35
To version < 230.1 >
edited by Kilight Cao
on 2023/07/17 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,11 +57,13 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  == 1.3 Features ==
... ... @@ -79,35 +79,31 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
86 86  
87 87  
88 -
89 -== 1.5 LED Indicators ==
90 -
91 -
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
111 111  
112 112  
113 113  LPS8-V2 has a black toggle button, which is:
... ... @@ -115,12 +115,12 @@
115 115  
116 116  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
119 119  
120 120  
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
124 124  
125 125  
126 126  = 2. Quick Start =
... ... @@ -131,14 +131,29 @@
131 131  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
132 132  
133 133  
134 -== 2.1 Connects to the network and accesses the gateway Web UI ==
132 +== 2.1 Access and Configure LPS8-V2 ==
135 135  
136 -== 2.1.1 connect the network ==
134 +=== 2.1.1 Find IP address of LPS8-V2 ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
141 +
142 +(% style="background-color:yellow" %)**dragino+dragino**
143 +
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 +
146 +[[image:image-20230527084515-1.png]]
147 +
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +
150 +
151 +
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 +
154 +
142 142  (((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
... ... @@ -151,9 +151,40 @@
151 151  
152 152  
153 153  
154 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
155 155  
156 156  
170 +[[image:image-20230107084650-2.png||height="310" width="839"]]
171 +
172 +
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
174 +
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 +
177 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
178 +
179 +
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
181 +
182 +
183 +As in the below photo:
184 +
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 +
187 +
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 +
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 +
192 +
193 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 +
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 +
197 +
198 +
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
157 157  [[image:image-20220622100542-2.png||height="369" width="1256"]]
158 158  
159 159  
... ... @@ -181,23 +181,96 @@
181 181  Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
182 182  
183 183  
184 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
228 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
185 185  
186 186  You will see the login interface of LPS8-V2 as shown below.
187 187  
188 188  The account details for Web Login are:
189 189  
190 -(% style="color:#4f81bd" %)**User Name: root**
234 +(% style="color:blue" %)**User Name: root**
191 191  
192 -(% style="color:#4f81bd" %)**Password:   dragino**
236 +(% style="color:blue" %)**Password:   dragino**
193 193  
194 -[[image:image-20230106153501-1.png]]
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
195 195  
196 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
197 197  
198 -=== 2.2.1 Select your area frequency ===
241 +== 2.2  Typical Network Setup ==
199 199  
243 +=== 2.2.1  Overview ===
200 200  
245 +
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
201 201  (((
202 202  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
203 203  
... ... @@ -207,7 +207,7 @@
207 207  [[image:image-20220622103332-9.png||height="485" width="938"]]
208 208  
209 209  
210 -=== 2.2.2 Get the only gateway EUI ===
327 +=== 2.3.2 Get the only gateway EUI ===
211 211  
212 212  
213 213  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -231,7 +231,7 @@
231 231  [[image:image-20220622103956-12.png]]
232 232  
233 233  
234 -== 2.2.3 Register the gateway to The Things Network ==
351 +=== 2.3.3 Register the gateway to The Things Network ===
235 235  
236 236  
237 237  **Login to The Things Network**
... ... @@ -252,7 +252,7 @@
252 252  == 3.1 Home ==
253 253  
254 254  
255 -//Shows the system running status~://
372 +Shows the system running status:
256 256  
257 257  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
258 258  
... ... @@ -262,15 +262,15 @@
262 262  === 3.2.1 LoRa ~-~-> LoRa ===
263 263  
264 264  
265 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
266 266  
267 -//Different LPS8v2 hardware versions can support different frequency ranges~://
384 +Different LPS8v2 hardware versions can support different frequency ranges:
268 268  
269 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
270 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
271 271  
272 272  (% class="wikigeneratedid" %)
273 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
274 274  
275 275  
276 276  (% class="wikigeneratedid" %)
... ... @@ -287,7 +287,7 @@
287 287  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
288 288  
289 289  
290 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
291 291  
292 292  
293 293  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -296,7 +296,7 @@
296 296  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
297 297  
298 298  
299 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
300 300  
301 301  
302 302  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -311,8 +311,9 @@
311 311  
312 312  === 3.4.1 Network ~-~-> WiFi ===
313 313  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
314 314  
315 -[[image:image-20220616114756-4.png||height="251" width="669"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
316 316  
317 317  
318 318  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -321,12 +321,29 @@
321 321  [[image:image-20220820134112-2.png||height="539" width="668"]]
322 322  
323 323  
324 -=== 3.4.3 Network ~-~-> Firewall ===
442 +=== 3.4.3 Network ~-~-> Network ===
325 325  
326 326  
327 -[[image:image-20220616115351-6.png||height="244" width="661"]]
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
328 328  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
329 329  
449 +
450 +=== 3.4.4 Network ~-~-> Cellular ===
451 +
452 +
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
454 +
455 +(% style="color:red" %)**Note: APN cannot be empty.**
456 +
457 +[[image:image-20230228115126-1.png]]
458 +
459 +
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
461 +
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
463 +
464 +
330 330  == 3.5 System ==
331 331  
332 332  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -337,16 +337,26 @@
337 337  [[image:image-20220917144512-5.png||height="618" width="853"]]
338 338  
339 339  
340 -=== 3.5.2 System ~-~-> Backup/Restore ===
475 +=== 3.5.2 System ~-~-> System General ===
341 341  
342 342  
478 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
479 +
480 +In addition, Users can customize the FallBack IP address.
481 +
482 +[[image:image-20230214094058-3.png]]
483 +
484 +
485 +=== 3.5.3 System ~-~-> Backup/Restore ===
486 +
487 +
343 343  [[image:image-20220917144725-6.png||height="208" width="869"]]
344 344  
345 345  
346 -=== 3.5.3 System ~-~-> Remoteit ===
491 +=== 3.5.4 System ~-~-> Remoteit ===
347 347  
348 348  
349 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
494 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
350 350  
351 351  
352 352  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -354,34 +354,46 @@
354 354  [[image:image-20221230092303-2.png]]
355 355  
356 356  
502 +=== 3.5.5 System ~-~-> Package Management ===
503 +
504 +
505 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 +
507 +[[image:image-20230214094316-4.png]]
508 +
509 +
357 357  = 4. Build-in Server =
358 358  
359 359  
360 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
361 361  
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
362 362  
363 -[[image:image-20220820115644-1.png||height="217" width="778"]]
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
364 364  
365 365  
520 +
366 366  (% style="color:red" %)**Note:**
367 367  
368 - **Path**: System ~-~-> Built-in Server
523 + **Path**: Server ~-~-> Network Server
369 369  
525 + Server ~-~-> Application Server
370 370  
527 +
371 371  **Troubleshooting:**
372 372  
373 373  
374 374  **~ 1. URL does not jump properly**
375 375  
376 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
377 377  
378 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
379 379  
380 380  
381 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
382 382  
383 383  
384 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
385 385  
386 386  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
387 387  
... ... @@ -388,14 +388,25 @@
388 388  
389 389  Login account:
390 390  
391 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 +**Username : ** (% style="background-color:yellow" %)**admin**
392 392  
393 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
394 394  
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
395 395  
396 -[[image:image-20220725171719-1.png||height="570" width="769"]]
397 397  
398 398  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
557 +
558 +
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 +
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +
563 +[[image:image-20230321092456-1.png]]
564 +
565 +
566 +
399 399  == 4.2 Application Server ~-~- Node-Red ==
400 400  
401 401  
... ... @@ -419,147 +419,211 @@
419 419  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
420 420  
421 421  
422 -= 5. How users can access LPS8v2 using serial USB =
590 +=== **Upgrade the node.js** ===
423 423  
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
424 424  
425 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
426 426  
595 +the users can refer to this link to upgrade them.
427 427  
428 -Port 1 of the UART on the LPS8v2 is GND
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
429 429  
430 -(% class="box infomessage" %)
431 -(((
432 -**TXD  <~-~--> UART RXD (Gray line)**
433 433  
434 -**RXD  <~-~--> UART TXD (White line)**
600 +== 4.3 How to disable the built-in server ==
435 435  
436 -**GND <~-~--> GND (Black line)**
437 -)))
438 438  
603 +Use the following commands to start and stop the TTNv3 service:
439 439  
440 -**LPS8v2 UART connection photo**
605 +(% class="box infomessage" %)
606 +(((
607 +**# start**
608 +systemctl start ttnstack
441 441  
442 -[[image:image-20220804163015-1.png||height="621" width="466"]]
610 +**# stop**
611 +systemctl stop ttnstack
443 443  
613 +**# enable**
614 +systemctl enable ttnstack
444 444  
616 +**#disable**
617 +systemctl disable ttnstack
618 +)))
445 445  
446 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
620 +Use the following commands to start and stop the Node-Red service:
447 447  
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
448 448  
449 -[[image:image-20220804164928-3.png||height="320" width="332"]]
627 +**# stop**
628 +systemctl stop nodered
450 450  
630 +**# enable**
631 +systemctl enable nodered
451 451  
452 -[[image:image-20220804164747-2.png||height="622" width="594"]]
633 +**#disable**
634 +systemctl disable nodered
635 +)))
453 453  
454 454  
455 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
456 456  
457 457  
458 -== **Step 1: Configure Frequency Band** ==
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
459 459  
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
460 460  
461 -//Each country has a requirement for frequency region. Choose the right one for your area.//
462 462  
463 -[[image:image-20220905164308-1.png]]
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
464 464  
465 465  
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
466 466  
467 -== **Step 2: Configure the forward address** ==
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
468 468  
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
469 469  
470 -**Select one of the servers to configure.**
471 471  
472 -**For example:**
656 +When the configuration is complete, click** "Save&Apply"**.
473 473  
474 -[[image:image-20220905164847-2.png]]
475 475  
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
476 476  
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
477 477  
478 -== **Step 3: Download and Install the Helium-gateway-rs** ==
479 479  
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
480 480  
481 -**Access the gateway CLI via SSH.**
482 482  
483 -[[image:image-20220905165222-3.png]]
484 484  
668 += 6. How users can access LPS8-V2 using serial USB =
485 485  
486 -**Download gateway-rs.**
487 487  
488 -[[image:image-20220905165715-5.png]]
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
489 489  
673 +
674 +Port 1 of the UART on the LPS8-V2 is GND
675 +
490 490  (% class="box infomessage" %)
491 491  (((
492 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
678 +**TXD  <~-~--> UART RXD (Gray line)**
679 +
680 +**RXD  <~-~--> UART TXD (White line)**
681 +
682 +**GND <~-~--> GND (Black line)**
493 493  )))
494 494  
495 495  
496 -**Install gateway-rs.**
686 +**LPS8v2 UART connection photo**
497 497  
498 -[[image:image-20220905165917-7.png]]
499 499  
500 -(% class="box infomessage" %)
501 -(((
502 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
503 -)))
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
504 504  
691 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
505 505  
506 -**Modify configuration.**
507 507  
694 +[[image:image-20220804164928-3.png||height="320" width="332"]]
508 508  
509 -[[image:image-20220905173847-12.png]]
510 510  
697 +[[image:image-20220804164747-2.png||height="622" width="594"]]
511 511  
512 -(% class="box infomessage" %)
513 -(((
514 -**region=<Enter regional parameters> \
515 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
516 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
517 -)))
518 518  
700 += 7. OTA System Update =
519 519  
520 -**Restart the helium_gateway**
521 521  
522 -[[image:image-20220905170920-9.png]]
703 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
523 523  
524 524  
706 +== 7.1 Auto-update method ==
707 +
708 +
709 +The default, each gateway will enable the auto-update function.
710 +
711 +this function will be triggered every boot and every midnight.
712 +
713 +
714 +Users can enable/disable it via Web Page
715 +
716 +[[image:image-20230607094447-2.png]]
717 +
718 +
719 +== 7.2 Manual upgrade method ==
720 +
721 +
722 +1). Using the Linux command to upgrade the system
723 +
724 +
525 525  (% class="box infomessage" %)
526 526  (((
527 -**systemctl restart helium_gateway**
727 +**apt update && apt install *dragino***
528 528  )))
529 529  
530 530  
531 -**Check the helium_gateway Log：**
731 +2). Upgrade the system via the Web page button of "Manual Update"
532 532  
533 -[[image:image-20220905173952-13.png]]
534 534  
734 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
535 535  
736 +[[image:image-20230607093849-1.png]]
737 +
738 +
739 += 8. FAQ =
740 +
741 +== 8.1 How to change Hostname ==
742 +
743 +
744 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
745 +
536 536  (% class="box infomessage" %)
537 537  (((
538 -**journalctl -u helium_gateway -f**
748 +hostnamectl set-hostname dragino-123456
539 539  )))
540 540  
751 +[[image:image-20230517102429-1.png]]
541 541  
542 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
753 +After the configuration is complete, run "reboot" to restart the gateway.
543 543  
544 -where the helium gateway log is shown:
545 545  
546 -[[image:image-20220905174534-14.png]]
756 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
547 547  
548 548  
549 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
759 +Migrate guide:
550 550  
761 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
551 551  
552 -= 7. OTA System Update =
763 +**2. On the Server ~-~-> Network Server interface, click "Management"**
553 553  
765 +[[image:image-20230616162454-1.png]]
554 554  
555 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
556 556  
768 +**3. Click "Migrate-Chirpstack"**
557 557  
558 -= 8. Trouble Shooting =
770 +[[image:image-20230616162742-2.png]]
559 559  
560 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
561 561  
773 +**4. Strat Install **
562 562  
775 +
776 +Click start Install and wait until the migration succeeds
777 +
778 +[[image:image-20230616162934-3.png]]
779 +
780 +
781 +**5.Migration complete check result**
782 +
783 +[[image:image-20230616174526-4.png||height="706" width="983"]]
784 +
785 +
786 +[[image:image-20230616180004-9.png]]
787 +
788 +
789 +
790 += 9. Trouble Shooting =
791 +
792 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
793 +
794 +
563 563  [[image:image-20220920135918-1.png]]
564 564  
565 565  
... ... @@ -575,18 +575,57 @@
575 575  [[image:image-20220920141936-2.png]]
576 576  
577 577  
578 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
810 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
579 579  
580 580  
813 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
814 +
815 +[[image:image-20230508171607-1.png]]
816 +
817 +
818 +== 9.3  Fallback IP does not work, how can users check ==
819 +
820 +
821 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 +
823 +
824 +**1.Check whether the configuration is correct**
825 +
826 +Run the CMD command to ipconfig and ping 172.31.255.254.
827 +
828 +If this fails, the user needs to reconfigure.
829 +
830 +[[image:image-20230413170224-3.png||height="433" width="707"]]
831 +
832 +[[image:image-20230413170246-4.png]]
833 +
834 +
835 +**2. Check whether the firewall is disabled**
836 +
837 +If the firewall is not down, this will affect access to the gateway.
838 +
839 +
840 +== 9.4  Click "Manual_Update", why there is no response? ==
841 +
842 +
843 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
844 +
845 +
846 +[[image:image-20230527090555-3.png||height="660" width="832"]]
847 +
848 +
849 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
850 +
851 +
581 581  (((
582 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
853 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
583 583  )))
584 584  
585 585  (((
586 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
857 +With your question as detailed as possible. We will reply and help you in the shortest.
587 587  
588 588  
589 -= 10. Reference =
860 += 11. Reference =
590 590  
591 591  
592 592  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -595,7 +595,7 @@
595 595  
596 596  )))
597 597  
598 -= 11. Order Info =
869 += 12. Order Info =
599 599  
600 600  
601 601  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -603,23 +603,31 @@
603 603  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
604 604  
605 605  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
877 +
606 606  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
879 +
607 607  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
881 +
608 608  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
883 +
609 609  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 +
610 610  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
611 611  
612 612  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
613 613  
614 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
615 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
616 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
617 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
890 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
618 618  
892 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
893 +
894 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
895 +
896 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
897 +
619 619  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
620 620  
621 621  
622 -= 12. Manufacturer Info =
901 += 13. Manufacturer Info =
623 623  
624 624  
625 625  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -629,7 +629,7 @@
629 629  LongCheng Street, LongGang District ; Shenzhen 518116,China
630 630  
631 631  
632 -= 13. FCC Warning =
911 += 14. FCC Warning =
633 633  
634 634  
635 635  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0