Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 124.1 >
edited by Kilight Cao
on 2023/01/06 15:35
To version < 210.1 >
edited by Kilight Cao
on 2023/06/02 14:31
>
Change comment: Uploaded new attachment "image-20230602143122-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,13 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
69 +
67 67  == 1.3 Features ==
68 68  
69 69  
... ... @@ -79,9 +79,10 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
85 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
88 +
85 85  == 1.4 Block Diagram ==
86 86  
87 87  
... ... @@ -92,19 +92,19 @@
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
99 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
101 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
103 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
105 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
107 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
111 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 110  == 1.6 Button Intruction ==
... ... @@ -133,12 +133,29 @@
133 133  
134 134  == 2.1 Connects to the network and accesses the gateway Web UI ==
135 135  
136 -== 2.1.1 connect the network ==
140 +=== 2.1.1 connect the network ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
143 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
146 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
147 +
148 + (% style="background-color:yellow" %)**dragino+dragino**
149 +
150 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
151 +
152 +[[image:image-20230527084515-1.png]]
153 +
154 +[[image:image-20230527085250-2.png||height="495" width="284"]]
155 +
156 +
157 +If your computer cannot scan the wifi AP on the LPS8-V2 , follow this connection to debug:
158 +
159 +
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
161 +
162 +
142 142  (((
143 143  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
... ... @@ -151,9 +151,40 @@
151 151  
152 152  
153 153  
154 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
175 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
155 155  
156 156  
178 +[[image:image-20230107084650-2.png||height="310" width="839"]]
179 +
180 +
181 +(% style="color:blue" %)**Steps to connect via fallback IP:**
182 +
183 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
184 +
185 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
186 +
187 +
188 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
189 +
190 +
191 +As in the below photo:
192 +
193 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
194 +
195 +
196 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
197 +
198 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
199 +
200 +
201 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
202 +
203 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
204 +
205 +
206 +
207 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
208 +
157 157  [[image:image-20220622100542-2.png||height="369" width="1256"]]
158 158  
159 159  
... ... @@ -181,23 +181,96 @@
181 181  Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
182 182  
183 183  
184 -[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
236 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
185 185  
186 186  You will see the login interface of LPS8-V2 as shown below.
187 187  
188 188  The account details for Web Login are:
189 189  
190 -(% style="color:#4f81bd" %)**User Name: root**
242 +(% style="color:blue" %)**User Name: root**
191 191  
192 -(% style="color:#4f81bd" %)**Password:   dragino**
244 +(% style="color:blue" %)**Password:   dragino**
193 193  
194 -[[image:image-20230106153501-1.png]]
246 +[[image:image-20230106153501-1.png||height="367" width="894"]]
195 195  
196 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
197 197  
198 -=== 2.2.1 Select your area frequency ===
249 +== 2.2  Typical Network Setup ==
199 199  
251 +=== 2.2.1  Overview ===
200 200  
253 +
254 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
255 +
256 +* **WAN Port Internet Mode**
257 +
258 +* **WiFi Client Mode**
259 +
260 +* **Cellular Mode**
261 +
262 +
263 +=== 2.2.2  Use WAN port to access Internet ===
264 +
265 +
266 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
267 +
268 +
269 +[[image:image-20230411100633-2.png||height="501" width="935"]]
270 +
271 +
272 +=== 2.2.3  Access the Internet as a WiFi Client ===
273 +
274 +
275 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
276 +
277 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
278 +
279 +[[image:image-20230411095739-1.png||height="264" width="691"]]
280 +
281 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
282 +
283 +
284 +=== 2.2.4  Use built-in 4G modem for internet access ===
285 +
286 +
287 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
288 +
289 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
290 +
291 +
292 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
293 +
294 +First, install the Micro SIM card as below direction
295 +
296 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
297 +
298 +
299 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
300 +
301 +
302 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
303 +
304 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
305 +
306 +
307 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
308 +
309 +
310 +=== 2.2.5  Check Internet connection ===
311 +
312 +In the **home** page, we can check the Internet connection.
313 +
314 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
315 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
316 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
317 +
318 +[[image:image-20230411101534-3.png||height="544" width="942"]]
319 +
320 +
321 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
322 +
323 +=== 2.3.1 Select your area frequency ===
324 +
325 +
201 201  (((
202 202  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
203 203  
... ... @@ -207,7 +207,7 @@
207 207  [[image:image-20220622103332-9.png||height="485" width="938"]]
208 208  
209 209  
210 -=== 2.2.2 Get the only gateway EUI ===
335 +=== 2.3.2 Get the only gateway EUI ===
211 211  
212 212  
213 213  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -231,7 +231,7 @@
231 231  [[image:image-20220622103956-12.png]]
232 232  
233 233  
234 -== 2.2.3 Register the gateway to The Things Network ==
359 +=== 2.3.3 Register the gateway to The Things Network ===
235 235  
236 236  
237 237  **Login to The Things Network**
... ... @@ -252,7 +252,7 @@
252 252  == 3.1 Home ==
253 253  
254 254  
255 -//Shows the system running status~://
380 +Shows the system running status:
256 256  
257 257  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
258 258  
... ... @@ -262,15 +262,15 @@
262 262  === 3.2.1 LoRa ~-~-> LoRa ===
263 263  
264 264  
265 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
390 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
266 266  
267 -//Different LPS8v2 hardware versions can support different frequency ranges~://
392 +Different LPS8v2 hardware versions can support different frequency ranges:
268 268  
269 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
270 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
394 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
395 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
271 271  
272 272  (% class="wikigeneratedid" %)
273 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
398 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
274 274  
275 275  
276 276  (% class="wikigeneratedid" %)
... ... @@ -287,7 +287,7 @@
287 287  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
288 288  
289 289  
290 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
415 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
291 291  
292 292  
293 293  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -296,7 +296,7 @@
296 296  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
297 297  
298 298  
299 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
424 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
300 300  
301 301  
302 302  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -321,12 +321,29 @@
321 321  [[image:image-20220820134112-2.png||height="539" width="668"]]
322 322  
323 323  
324 -=== 3.4.3 Network ~-~-> Firewall ===
449 +=== 3.4.3 Network ~-~-> Network ===
325 325  
326 326  
327 -[[image:image-20220616115351-6.png||height="244" width="661"]]
452 +In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
328 328  
454 +[[image:image-20230214093657-2.png||height="333" width="858"]]
329 329  
456 +
457 +=== 3.4.4 Network ~-~-> Cellular ===
458 +
459 +
460 +In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
461 +
462 +(% style="color:red" %)**Note: APN cannot be empty.**
463 +
464 +[[image:image-20230228115126-1.png]]
465 +
466 +
467 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
468 +
469 +[[image:image-20230228115535-2.png||height="478" width="888"]]
470 +
471 +
330 330  == 3.5 System ==
331 331  
332 332  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -337,16 +337,26 @@
337 337  [[image:image-20220917144512-5.png||height="618" width="853"]]
338 338  
339 339  
340 -=== 3.5.2 System ~-~-> Backup/Restore ===
482 +=== 3.5.2 System ~-~-> System General ===
341 341  
342 342  
485 +In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
486 +
487 +In addition, Users can customize the FallBack IP address.
488 +
489 +[[image:image-20230214094058-3.png]]
490 +
491 +
492 +=== 3.5.3 System ~-~-> Backup/Restore ===
493 +
494 +
343 343  [[image:image-20220917144725-6.png||height="208" width="869"]]
344 344  
345 345  
346 -=== 3.5.3 System ~-~-> Remoteit ===
498 +=== 3.5.4 System ~-~-> Remoteit ===
347 347  
348 348  
349 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
501 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
350 350  
351 351  
352 352  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -354,6 +354,14 @@
354 354  [[image:image-20221230092303-2.png]]
355 355  
356 356  
509 +=== 3.5.5 System ~-~-> Package Management ===
510 +
511 +
512 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
513 +
514 +[[image:image-20230214094316-4.png]]
515 +
516 +
357 357  = 4. Build-in Server =
358 358  
359 359  
... ... @@ -360,7 +360,7 @@
360 360  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
361 361  
362 362  
363 -[[image:image-20220820115644-1.png||height="217" width="778"]]
523 +[[image:image-20230214095318-5.png||height="347" width="980"]]
364 364  
365 365  
366 366  (% style="color:red" %)**Note:**
... ... @@ -396,6 +396,16 @@
396 396  [[image:image-20220725171719-1.png||height="570" width="769"]]
397 397  
398 398  
559 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
560 +
561 +
562 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
563 +
564 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
565 +
566 +[[image:image-20230321092456-1.png]]
567 +
568 +
399 399  == 4.2 Application Server ~-~- Node-Red ==
400 400  
401 401  
... ... @@ -419,16 +419,78 @@
419 419  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
420 420  
421 421  
422 -= 5. How users can access LPS8v2 using serial USB =
592 +=== **Upgrade the node.js** ===
423 423  
594 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
424 424  
425 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
426 426  
597 +the users can refer to this link to upgrade them.
427 427  
428 -Port 1 of the UART on the LPS8v2 is GND
599 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
429 429  
601 +
602 +== 4.3 How to disable the built-in server ==
603 +
604 +
605 +Use the following commands to start and stop the TTNv3 service:
606 +
430 430  (% class="box infomessage" %)
431 431  (((
609 +**# start**
610 +systemctl start ttnstack
611 +
612 +**# stop**
613 +systemctl stop ttnstack
614 +
615 +**# enable**
616 +systemctl enable ttnstack
617 +
618 +**#disable**
619 +systemctl disable ttnstack
620 +)))
621 +
622 +Use the following commands to start and stop the Node-Red service:
623 +
624 +(% class="box infomessage" %)
625 +(((
626 +**# start**
627 +systemctl start nodered
628 +
629 +**# stop**
630 +systemctl stop nodered
631 +
632 +**# enable**
633 +systemctl enable nodered
634 +
635 +**#disable**
636 +systemctl disable nodered
637 +)))
638 +
639 +
640 +== 4.4 How to use ChirpStack on LPS8-V2 ==
641 +
642 +
643 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
644 +
645 +[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
646 +
647 +[[image:image-20230222094908-1.png||height="133" width="798"]]
648 +
649 +
650 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
651 +
652 +
653 +
654 += 6. How users can access LPS8-V2 using serial USB =
655 +
656 +
657 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
658 +
659 +
660 +Port 1 of the UART on the LPS8-V2 is GND
661 +
662 +(% class="box infomessage" %)
663 +(((
432 432  **TXD  <~-~--> UART RXD (Gray line)**
433 433  
434 434  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -439,10 +439,9 @@
439 439  
440 440  **LPS8v2 UART connection photo**
441 441  
442 -[[image:image-20220804163015-1.png||height="621" width="466"]]
443 443  
675 +[[image:image-20230421094319-2.png||height="351" width="392"]]
444 444  
445 -
446 446  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
447 447  
448 448  
... ... @@ -452,7 +452,7 @@
452 452  [[image:image-20220804164747-2.png||height="622" width="594"]]
453 453  
454 454  
455 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
686 += 7. Use the helium gateway-rs as the Data-only Hotspot =
456 456  
457 457  
458 458  == **Step 1: Configure Frequency Band** ==
... ... @@ -480,59 +480,72 @@
480 480  
481 481  **Access the gateway CLI via SSH.**
482 482  
483 -[[image:image-20220905165222-3.png]]
714 +[[image:image-20230425153417-2.png]]
484 484  
485 485  
486 -**Download gateway-rs.**
717 +**Install the new gateway-rs**
487 487  
488 -[[image:image-20220905165715-5.png]]
489 -
490 490  (% class="box infomessage" %)
491 491  (((
492 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
721 +**apt update && apt install helium-gateway**
493 493  )))
494 494  
724 +[[image:image-20230425154058-4.png]]
495 495  
496 -**Install gateway-rs.**
497 497  
498 -[[image:image-20220905165917-7.png]]
499 499  
728 +Option: If you installed the older gateway-rs, you have clean it
729 +
500 500  (% class="box infomessage" %)
501 501  (((
502 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
732 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
503 503  )))
504 504  
735 +[[image:image-20230425153823-3.png]]
505 505  
506 -**Modify configuration.**
507 507  
738 +**Change the region setting:**
508 508  
509 -[[image:image-20220905173847-12.png]]
510 510  
741 +(% class="box infomessage" %)
742 +(((
743 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
511 511  
745 +
746 +**e.g: **
747 +
748 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
749 +
750 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
751 +)))
752 +
753 +
754 +**Restart the gateway-rs**
755 +
512 512  (% class="box infomessage" %)
513 513  (((
514 -**region=<Enter regional parameters> \
515 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
516 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
758 +**systemctl restart helium_gateway**
517 517  )))
518 518  
761 +[[image:image-20230425155612-7.png||height="265" width="911"]]
519 519  
520 -**Restart the helium_gateway**
521 521  
522 -[[image:image-20220905170920-9.png]]
523 523  
765 +**Check the helium_gateway running status**
524 524  
767 +
525 525  (% class="box infomessage" %)
526 526  (((
527 -**systemctl restart helium_gateway**
770 +**systemctl status helium_gateway**
528 528  )))
529 529  
530 530  
531 -**Check the helium_gateway Log：**
774 +[[image:image-20230425154740-5.png]]
532 532  
533 -[[image:image-20220905173952-13.png]]
534 534  
535 535  
778 +**Check the helium_gateway Log：**
779 +
536 536  (% class="box infomessage" %)
537 537  (((
538 538  **journalctl -u helium_gateway -f**
... ... @@ -539,27 +539,60 @@
539 539  )))
540 540  
541 541  
542 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
786 +[[image:image-20230425155659-8.png]]
543 543  
544 -where the helium gateway log is shown:
545 545  
546 -[[image:image-20220905174534-14.png]]
789 += 8. OTA System Update =
547 547  
548 548  
549 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
792 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
550 550  
551 551  
552 -= 7. OTA System Update =
795 += 9. FAQ =
553 553  
797 +== 9.1 How to change Hostname ==
554 554  
555 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
556 556  
800 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
557 557  
558 -= 8. Trouble Shooting =
802 +(% class="box infomessage" %)
803 +(((
804 +hostnamectl set-hostname dragino-123456
805 +)))
559 559  
560 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
807 +[[image:image-20230517102429-1.png]]
561 561  
809 +After the configuration is complete, run "reboot" to restart the gateway.
562 562  
811 +
812 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
813 +
814 +
815 +Migrate guide:
816 +
817 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
818 +
819 +2. Download migrate script and run it.
820 +
821 +(% class="box infomessage" %)
822 +(((
823 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
824 +)))
825 +
826 +[[image:image-20230602135658-1.png||height="545" width="986"]]
827 +
828 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
829 +
830 +[[image:image-20230602135825-2.png||height="356" width="855"]]
831 +
832 +The default account for chirpstack is: **admin/admin**
833 +
834 +
835 += 10. Trouble Shooting =
836 +
837 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
838 +
839 +
563 563  [[image:image-20220920135918-1.png]]
564 564  
565 565  
... ... @@ -575,18 +575,57 @@
575 575  [[image:image-20220920141936-2.png]]
576 576  
577 577  
578 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
855 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
579 579  
580 580  
858 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
859 +
860 +[[image:image-20230508171607-1.png]]
861 +
862 +
863 +== 10.3  Fallback IP does not work, how can users check ==
864 +
865 +
866 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
867 +
868 +
869 +**1.Check whether the configuration is correct**
870 +
871 +Run the CMD command to ipconfig and ping 172.31.255.254.
872 +
873 +If this fails, the user needs to reconfigure.
874 +
875 +[[image:image-20230413170224-3.png||height="433" width="707"]]
876 +
877 +[[image:image-20230413170246-4.png]]
878 +
879 +
880 +**2. Check whether the firewall is disabled**
881 +
882 +If the firewall is not down, this will affect access to the gateway.
883 +
884 +
885 +== 10.4  Click "Manual_Update", why there is no response? ==
886 +
887 +
888 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
889 +
890 +
891 +[[image:image-20230527090555-3.png||height="660" width="832"]]
892 +
893 +
894 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
895 +
896 +
581 581  (((
582 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
898 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
583 583  )))
584 584  
585 585  (((
586 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
902 +With your question as detailed as possible. We will reply and help you in the shortest.
587 587  
588 588  
589 -= 10. Reference =
905 += 12. Reference =
590 590  
591 591  
592 592  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -595,7 +595,7 @@
595 595  
596 596  )))
597 597  
598 -= 11. Order Info =
914 += 13. Order Info =
599 599  
600 600  
601 601  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -619,7 +619,7 @@
619 619  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
620 620  
621 621  
622 -= 12. Manufacturer Info =
938 += 14. Manufacturer Info =
623 623  
624 624  
625 625  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -629,7 +629,7 @@
629 629  LongCheng Street, LongGang District ; Shenzhen 518116,China
630 630  
631 631  
632 -= 13. FCC Warning =
948 += 15. FCC Warning =
633 633  
634 634  
635 635  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0