Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 122.4 >
edited by Kilight Cao
on 2023/01/06 15:31
To version < 81.1 >
edited by Xiaoye
on 2022/08/20 11:56
>
Change comment: Uploaded new attachment "image-20220820115644-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -64,7 +64,7 @@
64 64  * Storage Temperature: -20 ~~ 65°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 -== 1.3 Features ==
65 +== **1.3 Features** ==
68 68  
69 69  
70 70  * Open Source Debian system
... ... @@ -82,66 +82,52 @@
82 82  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 83  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 84  
83 +== **1.4 Block Diagram** ==
85 85  
86 -== 1.4 Block Diagram ==
87 87  
88 88  
87 +== **1.5 LED Indicators** ==
89 89  
90 -== 1.5 LED Indicators ==
91 91  
92 -
93 93  LPS8-V2 has totally four LEDs, They are:
94 94  
95 95  
96 96  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
97 97  
98 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
99 99  
100 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
101 101  
102 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
103 103  
104 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
105 105  
106 106  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
107 107  
108 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
109 109  
110 110  
111 -== 1.6 Button Intruction ==
112 112  
109 += **2. Quick Start** =
113 113  
114 -LPS8-V2 has a black toggle button, which is:
115 115  
116 -
117 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
118 -
119 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 -
121 -
122 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
123 -
124 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
125 -
126 -
127 -= 2. Quick Start =
128 -
129 -
130 130  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
131 131  
132 132  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
133 133  
134 134  
135 -== 2.1 Connects to the network and accesses the gateway Web UI ==
136 136  
137 -== 2.1.1 connect the network ==
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
138 138  
139 139  
121 +== **2.1.1 connect the network.** ==
122 +
123 +
140 140  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 141  
142 142  
143 143  (((
144 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
128 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 145  )))
146 146  
147 147  (((
... ... @@ -158,65 +158,66 @@
158 158  [[image:image-20220622100542-2.png||height="369" width="1256"]]
159 159  
160 160  
161 -Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
162 162  
163 163  
164 -[[image:image-20220622102702-6.png]]
165 165  
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
166 166  
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
167 167  
168 -**Wi-Fi configuration successful**
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
169 169  
157 +[[image:image-20220622101433-4.png]]
170 170  
171 -[[image:image-20220622102847-7.png]]
172 172  
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
173 173  
174 -[[image:image-20220622102901-8.png||height="476" width="938"]]
175 175  
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
176 176  
177 -=== 2.1.2 Access Configure Web UI ===
178 178  
166 +Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
179 179  
180 -**Web Interface**
181 181  
182 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
169 +[[image:image-20220622102702-6.png]]
183 183  
184 184  
185 -**//http:~/~/IP_ADDRESS //**
186 186  
173 +**Wi-Fi configuration successful**
187 187  
188 -You will see the login interface of LPS8-V2 as shown below.
189 189  
190 -The account details for Web Login are:
176 +[[image:image-20220622102847-7.png]]
191 191  
192 -(% style="color:#4f81bd" %)**User Name: root**
193 193  
194 -(% style="color:#4f81bd" %)**Password:   dragino**
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
195 195  
196 196  
197 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
198 198  
199 -=== 2.2.1 Select your area frequency ===
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
200 200  
201 201  
186 +=== **2.2.1 Select your area frequency** ===
187 +
188 +
202 202  (((
203 203  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
204 -
205 -
206 206  )))
207 207  
208 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
209 209  
210 210  
211 -=== 2.2.2 Get the only gateway EUI ===
212 212  
197 +=== **2.2.2 Get the only gateway EUI** ===
213 213  
199 +
214 214  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
215 215  
202 +[[image:image-20220622103355-10.png]]
216 216  
217 -[[image:image-20220622103355-10.png||height="698" width="949"]]
218 218  
219 -
220 220  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
221 221  
222 222  
... ... @@ -232,6 +232,7 @@
232 232  [[image:image-20220622103956-12.png]]
233 233  
234 234  
220 +
235 235  == 2.2.3 Register the gateway to The Things Network ==
236 236  
237 237  
... ... @@ -248,19 +248,20 @@
248 248  **Get it online**
249 249  
250 250  
251 -= 3. Web Configure Pages =
252 252  
253 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
254 254  
255 255  
241 +== **3.1 Home** ==
242 +
243 +
256 256  //Shows the system running status~://
257 257  
258 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
259 259  
247 +== **3.2 LoRa Settings** ==
260 260  
261 -== 3.2 LoRa Settings ==
262 262  
263 -=== 3.2.1 LoRa ~-~-> LoRa ===
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
264 264  
265 265  
266 266  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -267,123 +267,97 @@
267 267  
268 268  //Different LPS8v2 hardware versions can support different frequency ranges~://
269 269  
270 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
271 271  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
272 272  
273 273  (% class="wikigeneratedid" %)
274 274  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
275 275  
276 -
277 277  (% class="wikigeneratedid" %)
278 278  [[image:image-20220616110739-1.png||height="372" width="682"]]
279 279  
280 280  
281 281  (((
282 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
283 283  )))
284 284  
285 285  
286 -== 3.3 LoRaWAN Settings ==
287 287  
288 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
289 289  
290 290  
291 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
292 292  
293 293  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
294 294  [[image:image-20220616111932-2.png||height="516" width="672"]]
295 295  
296 296  
297 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
298 298  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
299 299  
287 +
300 300  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
301 301  
302 -
303 303  [[image:image-20220616113246-3.png||height="396" width="672"]]
304 304  
305 305  
306 306  (((
307 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
308 308  )))
309 309  
310 310  
311 -== 3.4 Network Settings ==
312 312  
313 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
314 314  
315 315  
316 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
317 317  
318 318  
319 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
320 320  
321 321  
322 -[[image:image-20220820134112-2.png||height="539" width="668"]]
323 323  
309 +=== **3.4.2 Network ~-~-> System Status** ===
324 324  
325 -=== 3.4.3 Network ~-~-> Firewall ===
326 326  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
327 327  
328 -[[image:image-20220616115351-6.png||height="244" width="661"]]
329 329  
330 330  
331 -== 3.5 System ==
316 +=== **3.4.3 Network ~-~-> Firewall** ===
332 332  
333 -=== 3.5.1 System ~-~-> System Overview ===
334 334  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
335 335  
336 -Shows the system info:
337 337  
338 -[[image:image-20220917144512-5.png||height="618" width="853"]]
339 339  
323 +== **3.5 System** ==
340 340  
341 -=== 3.5.2 System ~-~-> Backup/Restore ===
342 342  
326 +=== **3.5.1  System ~-~-> System Overview** ===
343 343  
344 -[[image:image-20220917144725-6.png||height="208" width="869"]]
345 345  
329 +Shows the system info:
346 346  
347 -=== 3.5.3 System ~-~-> Remoteit ===
348 348  
349 349  
350 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
351 351  
352 352  
353 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
354 354  
355 -[[image:image-20221230092303-2.png]]
356 356  
357 357  
358 -= 4. Build-in Server =
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
359 359  
360 360  
361 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
362 362  
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
363 363  
364 -[[image:image-20220820115644-1.png||height="217" width="778"]]
365 365  
366 -
367 -(% style="color:red" %)**Note:**
368 -
369 - **Path**: System ~-~-> Built-in Server
370 -
371 -
372 -**Troubleshooting:**
373 -
374 -
375 -**~ 1. URL does not jump properly**
376 -
377 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
378 -
379 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
380 -
381 -
382 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
383 -
384 -
385 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
386 -
387 387  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
388 388  
389 389  
... ... @@ -397,188 +397,86 @@
397 397  [[image:image-20220725171719-1.png||height="570" width="769"]]
398 398  
399 399  
400 -== 4.2 Application Server ~-~- Node-Red ==
361 +(((
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
364 +)))
401 401  
402 402  
403 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
404 -
405 -
406 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
407 -
408 -
409 -[[image:image-20220725172124-3.png||height="610" width="843"]]
410 -
411 -
412 -
413 -=== **Using Node-Red, InfluxDB and Grafana** ===
414 -
415 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
416 -
417 -
418 -the users can refer to this link to install them.
419 -
420 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
421 -
422 -
423 -= 5. How users can access LPS8v2 using serial USB =
424 -
425 -
426 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
427 -
428 -
429 -Port 1 of the UART on the LPS8v2 is GND
430 -
431 431  (% class="box infomessage" %)
432 432  (((
433 -**TXD  <~-~--> UART RXD (Gray line)**
434 -
435 -**RXD  <~-~--> UART TXD (White line)**
436 -
437 -**GND <~-~--> GND (Black line)**
369 +(((
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
438 438  )))
373 +)))
439 439  
440 440  
441 -**LPS8v2 UART connection photo**
442 442  
443 -[[image:image-20220804163015-1.png||height="621" width="466"]]
377 += **5. Build-in Application Server ~-~- Node-Red** =
444 444  
445 445  
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
446 446  
447 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
448 448  
449 449  
450 -[[image:image-20220804164928-3.png||height="320" width="332"]]
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
451 451  
452 452  
453 -[[image:image-20220804164747-2.png||height="622" width="594"]]
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
454 454  
455 455  
456 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
457 -
458 -
459 -== **Step 1: Configure Frequency Band** ==
460 -
461 -
462 -//Each country has a requirement for frequency region. Choose the right one for your area.//
463 -
464 -[[image:image-20220905164308-1.png]]
465 -
466 -
467 -
468 -== **Step 2: Configure the forward address** ==
469 -
470 -
471 -**Select one of the servers to configure.**
472 -
473 -**For example:**
474 -
475 -[[image:image-20220905164847-2.png]]
476 -
477 -
478 -
479 -== **Step 3: Download and Install the Helium-gateway-rs** ==
480 -
481 -
482 -**Access the gateway CLI via SSH.**
483 -
484 -[[image:image-20220905165222-3.png]]
485 -
486 -
487 -**Download gateway-rs.**
488 -
489 -[[image:image-20220905165715-5.png]]
490 -
491 -(% class="box infomessage" %)
492 492  (((
493 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
494 494  )))
495 495  
496 496  
497 -**Install gateway-rs.**
498 498  
499 -[[image:image-20220905165917-7.png]]
500 -
501 501  (% class="box infomessage" %)
502 502  (((
503 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
400 +(((
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
504 504  )))
404 +)))
505 505  
406 +[[image:image-20220728102000-1.png]]
506 506  
507 -**Modify configuration.**
508 508  
409 += **6. How users can access LPS8v2 using serial USB** =
509 509  
510 -[[image:image-20220905173847-12.png]]
511 511  
412 +**USB TTL to LPS8v2  Connection:**
512 512  
513 -(% class="box infomessage" %)
514 -(((
515 -**region=<Enter regional parameters> \
516 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
517 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
518 -)))
414 +Port 1 of the UART on the LPS8v2 is GND
519 519  
520 -
521 -**Restart the helium_gateway**
522 -
523 -[[image:image-20220905170920-9.png]]
524 -
525 -
526 526  (% class="box infomessage" %)
527 527  (((
528 -**systemctl restart helium_gateway**
529 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
530 530  
420 +RXD  <~-~--> UART TXD (White line)
531 531  
532 -**Check the helium_gateway Log：**
533 -
534 -[[image:image-20220905173952-13.png]]
535 -
536 -
537 -(% class="box infomessage" %)
538 -(((
539 -**journalctl -u helium_gateway -f**
422 +GND <~-~--> GND (Black line)
540 540  )))
541 541  
542 542  
543 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
426 +**LPS8v2 UART connection photo**
544 544  
545 -where the helium gateway log is shown:
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
546 546  
547 -[[image:image-20220905174534-14.png]]
548 548  
549 549  
550 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
551 551  
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
552 552  
553 -= 7. OTA System Update =
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
554 554  
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
555 555  
556 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
557 557  
558 -
559 -= 8. Trouble Shooting =
560 -
561 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
562 -
563 -
564 -[[image:image-20220920135918-1.png]]
565 -
566 -
567 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
568 -
569 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
570 -
571 -
572 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
573 -
574 -**Click the update URL button to configure the URL with the current eth port address.**
575 -
576 -[[image:image-20220920141936-2.png]]
577 -
578 -
579 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
580 -
581 -
582 582  (((
583 583  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
584 584  )))
... ... @@ -587,9 +587,10 @@
587 587  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
588 588  
589 589  
590 -= 10. Reference =
591 591  
450 += **11 Reference** =
592 592  
452 +
593 593  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
594 594  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
595 595  
... ... @@ -596,7 +596,7 @@
596 596  
597 597  )))
598 598  
599 -= 11. Order Info =
459 += **12. Order Info** =
600 600  
601 601  
602 602  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -620,9 +620,10 @@
620 620  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
621 621  
622 622  
623 -= 12. Manufacturer Info =
624 624  
484 += **13. Manufacturer Info** =
625 625  
486 +
626 626  **Shenzhen Dragino Technology Development co. LTD**
627 627  
628 628  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -630,9 +630,10 @@
630 630  LongCheng Street, LongGang District ; Shenzhen 518116,China
631 631  
632 632  
633 -= 13. FCC Warning =
634 634  
495 += **14. FCC Warning** =
635 635  
497 +
636 636  (((
637 637  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
638 638  )))
... ... @@ -661,7 +661,5 @@
661 661  
662 662  (((
663 663  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
664 -
665 -
666 666  )))
667 667  )))
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0