Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 122.4 >
edited by Kilight Cao
on 2023/01/06 15:31
To version < 237.1 >
edited by Xiaoye
on 2023/07/25 16:25
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,13 +57,16 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
69 +
67 67  == 1.3 Features ==
68 68  
69 69  
... ... @@ -79,36 +79,32 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
85 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 85  
86 -== 1.4 Block Diagram ==
89 +== 1.4 LED Indicators ==
87 87  
88 88  
89 -
90 -== 1.5 LED Indicators ==
91 -
92 -
93 93  LPS8-V2 has totally four LEDs, They are:
94 94  
95 95  
96 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
95 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
97 97  
98 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
97 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
99 99  
100 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
99 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
101 101  
102 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
101 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
103 103  
104 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
103 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
105 105  
106 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
105 + ✓** SOLID RED:** Device doesn't have an Internet connection.
107 107  
108 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
107 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
109 109  
110 110  
111 -== 1.6 Button Intruction ==
110 +== 1.5 Button Intruction ==
112 112  
113 113  
114 114  LPS8-V2 has a black toggle button, which is:
... ... @@ -116,12 +116,12 @@
116 116  
117 117  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
118 118  
119 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
118 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
120 120  
121 121  
122 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
121 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
123 123  
124 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
123 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
125 125  
126 126  
127 127  = 2. Quick Start =
... ... @@ -132,14 +132,29 @@
132 132  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
133 133  
134 134  
135 -== 2.1 Connects to the network and accesses the gateway Web UI ==
134 +== 2.1 Access and Configure LPS8-V2 ==
136 136  
137 -== 2.1.1 connect the network ==
136 +=== 2.1.1 Find IP address of LPS8-V2 ===
138 138  
139 139  
140 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
139 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
141 141  
142 142  
142 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
143 +
144 +(% style="background-color:yellow" %)**dragino+dragino**
145 +
146 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
147 +
148 +[[image:image-20230527084515-1.png]]
149 +
150 +[[image:image-20230527085250-2.png||height="495" width="284"]]
151 +
152 +
153 +
154 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
155 +
156 +
143 143  (((
144 144  Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 145  )))
... ... @@ -152,9 +152,40 @@
152 152  
153 153  
154 154  
155 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
169 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
156 156  
157 157  
172 +[[image:image-20230107084650-2.png||height="310" width="839"]]
173 +
174 +
175 +(% style="color:blue" %)**Steps to connect via fallback IP:**
176 +
177 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
178 +
179 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
180 +
181 +
182 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
183 +
184 +
185 +As in the below photo:
186 +
187 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
188 +
189 +
190 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
191 +
192 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
193 +
194 +
195 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
196 +
197 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
198 +
199 +
200 +
201 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
202 +
158 158  [[image:image-20220622100542-2.png||height="369" width="1256"]]
159 159  
160 160  
... ... @@ -182,23 +182,96 @@
182 182  Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
183 183  
184 184  
185 -**//http:~/~/IP_ADDRESS //**
230 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
186 186  
187 -
188 188  You will see the login interface of LPS8-V2 as shown below.
189 189  
190 190  The account details for Web Login are:
191 191  
192 -(% style="color:#4f81bd" %)**User Name: root**
236 +(% style="color:blue" %)**User Name: root**
193 193  
194 -(% style="color:#4f81bd" %)**Password:   dragino**
238 +(% style="color:blue" %)**Password:   dragino**
195 195  
240 +[[image:image-20230106153501-1.png||height="367" width="894"]]
196 196  
197 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
198 198  
199 -=== 2.2.1 Select your area frequency ===
243 +== 2.2  Typical Network Setup ==
200 200  
245 +=== 2.2.1  Overview ===
201 201  
247 +
248 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
249 +
250 +* **WAN Port Internet Mode**
251 +
252 +* **WiFi Client Mode**
253 +
254 +* **Cellular Mode**
255 +
256 +=== 2.2.2  Use WAN port to access Internet ===
257 +
258 +
259 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
260 +
261 +
262 +[[image:image-20230411100633-2.png||height="501" width="935"]]
263 +
264 +
265 +=== 2.2.3  Access the Internet as a WiFi Client ===
266 +
267 +
268 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
269 +
270 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
271 +
272 +[[image:image-20230411095739-1.png||height="264" width="691"]]
273 +
274 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
275 +
276 +
277 +=== 2.2.4  Use built-in 4G modem for internet access ===
278 +
279 +
280 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
281 +
282 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
283 +
284 +
285 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
286 +
287 +First, install the Micro SIM card as below direction
288 +
289 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
290 +
291 +
292 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
293 +
294 +
295 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
296 +
297 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
298 +
299 +
300 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
301 +
302 +
303 +=== 2.2.5  Check Internet connection ===
304 +
305 +
306 +In the **home** page, we can check the Internet connection.
307 +
308 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
309 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
310 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
311 +
312 +[[image:image-20230411101534-3.png||height="544" width="942"]]
313 +
314 +
315 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
316 +
317 +=== 2.3.1 Select your area frequency ===
318 +
319 +
202 202  (((
203 203  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
204 204  
... ... @@ -208,7 +208,7 @@
208 208  [[image:image-20220622103332-9.png||height="485" width="938"]]
209 209  
210 210  
211 -=== 2.2.2 Get the only gateway EUI ===
329 +=== 2.3.2 Get the only gateway EUI ===
212 212  
213 213  
214 214  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -232,7 +232,7 @@
232 232  [[image:image-20220622103956-12.png]]
233 233  
234 234  
235 -== 2.2.3 Register the gateway to The Things Network ==
353 +=== 2.3.3 Register the gateway to The Things Network ===
236 236  
237 237  
238 238  **Login to The Things Network**
... ... @@ -253,7 +253,7 @@
253 253  == 3.1 Home ==
254 254  
255 255  
256 -//Shows the system running status~://
374 +Shows the system running status:
257 257  
258 258  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
259 259  
... ... @@ -263,15 +263,15 @@
263 263  === 3.2.1 LoRa ~-~-> LoRa ===
264 264  
265 265  
266 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
384 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
267 267  
268 -//Different LPS8v2 hardware versions can support different frequency ranges~://
386 +Different LPS8v2 hardware versions can support different frequency ranges:
269 269  
270 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
271 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
388 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
389 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
272 272  
273 273  (% class="wikigeneratedid" %)
274 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
392 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
275 275  
276 276  
277 277  (% class="wikigeneratedid" %)
... ... @@ -288,7 +288,7 @@
288 288  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
289 289  
290 290  
291 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
409 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
292 292  
293 293  
294 294  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -297,7 +297,7 @@
297 297  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
298 298  
299 299  
300 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
418 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
301 301  
302 302  
303 303  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -312,8 +312,9 @@
312 312  
313 313  === 3.4.1 Network ~-~-> WiFi ===
314 314  
433 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
315 315  
316 -[[image:image-20220616114756-4.png||height="251" width="669"]]
435 +[[image:image-20230619095946-1.png||height="332" width="827"]]
317 317  
318 318  
319 319  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -322,12 +322,34 @@
322 322  [[image:image-20220820134112-2.png||height="539" width="668"]]
323 323  
324 324  
325 -=== 3.4.3 Network ~-~-> Firewall ===
444 +=== 3.4.3 Network ~-~-> Network ===
326 326  
327 327  
328 -[[image:image-20220616115351-6.png||height="244" width="661"]]
447 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
329 329  
449 +[[image:image-20230214093657-2.png||height="333" width="858"]]
330 330  
451 +
452 +=== 3.4.4 Network ~-~-> Cellular ===
453 +
454 +
455 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
456 +
457 +(% style="color:red" %)**Note: APN cannot be empty.**
458 +
459 +[[image:image-20230228115126-1.png]]
460 +
461 +
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
463 +
464 +[[image:image-20230228115535-2.png||height="478" width="888"]]
465 +
466 +
467 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
468 +
469 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
470 +
471 +
331 331  == 3.5 System ==
332 332  
333 333  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -338,16 +338,26 @@
338 338  [[image:image-20220917144512-5.png||height="618" width="853"]]
339 339  
340 340  
341 -=== 3.5.2 System ~-~-> Backup/Restore ===
482 +=== 3.5.2 System ~-~-> System General ===
342 342  
343 343  
485 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
486 +
487 +In addition, Users can customize the FallBack IP address.
488 +
489 +[[image:image-20230214094058-3.png]]
490 +
491 +
492 +=== 3.5.3 System ~-~-> Backup/Restore ===
493 +
494 +
344 344  [[image:image-20220917144725-6.png||height="208" width="869"]]
345 345  
346 346  
347 -=== 3.5.3 System ~-~-> Remoteit ===
498 +=== 3.5.4 System ~-~-> Remoteit ===
348 348  
349 349  
350 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
501 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
351 351  
352 352  
353 353  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -355,34 +355,46 @@
355 355  [[image:image-20221230092303-2.png]]
356 356  
357 357  
509 +=== 3.5.5 System ~-~-> Package Management ===
510 +
511 +
512 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
513 +
514 +[[image:image-20230214094316-4.png]]
515 +
516 +
358 358  = 4. Build-in Server =
359 359  
360 360  
361 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
520 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
362 362  
522 +[[image:image-20230616175617-8.png||height="390" width="894"]]
363 363  
364 -[[image:image-20220820115644-1.png||height="217" width="778"]]
524 +[[image:image-20230616175558-7.png||height="362" width="894"]]
365 365  
366 366  
527 +
367 367  (% style="color:red" %)**Note:**
368 368  
369 - **Path**: System ~-~-> Built-in Server
530 + **Path**: Server ~-~-> Network Server
370 370  
532 + Server ~-~-> Application Server
371 371  
534 +
372 372  **Troubleshooting:**
373 373  
374 374  
375 375  **~ 1. URL does not jump properly**
376 376  
377 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
540 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
378 378  
379 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
380 380  
381 381  
382 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
545 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
383 383  
384 384  
385 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
548 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
386 386  
387 387  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
388 388  
... ... @@ -389,14 +389,25 @@
389 389  
390 390  Login account:
391 391  
392 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
555 +**Username : ** (% style="background-color:yellow" %)**admin**
393 393  
394 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
557 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
395 395  
559 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
396 396  
397 -[[image:image-20220725171719-1.png||height="570" width="769"]]
398 398  
399 399  
563 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
564 +
565 +
566 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
567 +
568 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
569 +
570 +[[image:image-20230321092456-1.png]]
571 +
572 +
573 +
400 400  == 4.2 Application Server ~-~- Node-Red ==
401 401  
402 402  
... ... @@ -420,16 +420,93 @@
420 420  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
421 421  
422 422  
423 -= 5. How users can access LPS8v2 using serial USB =
597 +=== **Upgrade the node.js** ===
424 424  
599 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
425 425  
426 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
427 427  
602 +the users can refer to this link to upgrade them.
428 428  
429 -Port 1 of the UART on the LPS8v2 is GND
604 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
430 430  
606 +
607 +== 4.3 How to disable the built-in server ==
608 +
609 +
610 +Use the following commands to start and stop the TTNv3 service:
611 +
431 431  (% class="box infomessage" %)
432 432  (((
614 +**# start**
615 +systemctl start ttnstack
616 +
617 +**# stop**
618 +systemctl stop ttnstack
619 +
620 +**# enable**
621 +systemctl enable ttnstack
622 +
623 +**#disable**
624 +systemctl disable ttnstack
625 +)))
626 +
627 +Use the following commands to start and stop the Node-Red service:
628 +
629 +(% class="box infomessage" %)
630 +(((
631 +**# start**
632 +systemctl start nodered
633 +
634 +**# stop**
635 +systemctl stop nodered
636 +
637 +**# enable**
638 +systemctl enable nodered
639 +
640 +**#disable**
641 +systemctl disable nodered
642 +)))
643 +
644 +
645 +== 4.4 How to use ChirpStack on LPS8-V2 ==
646 +
647 +
648 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
649 +
650 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
651 +
652 +
653 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
654 +
655 +
656 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
657 +
658 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
659 +
660 +[[image:image-20230602140406-3.png||height="480" width="918"]]
661 +
662 +
663 +When the configuration is complete, click** "Save&Apply"**.
664 +
665 +
666 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
667 +
668 +[[image:image-20230602143122-4.png||height="511" width="983"]]
669 +
670 +
671 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
672 +
673 +
674 +
675 += 6. How users can access LPS8-V2 using serial USB =
676 +
677 +
678 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
679 +
680 +Port 1 of the UART on the LPS8-V2 is GND
681 +
682 +(% class="box infomessage" %)
683 +(((
433 433  **TXD  <~-~--> UART RXD (Gray line)**
434 434  
435 435  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -437,13 +437,10 @@
437 437  **GND <~-~--> GND (Black line)**
438 438  )))
439 439  
440 -
441 441  **LPS8v2 UART connection photo**
442 442  
443 -[[image:image-20220804163015-1.png||height="621" width="466"]]
693 +[[image:image-20230421094319-2.png||height="351" width="392"]]
444 444  
445 -
446 -
447 447  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
448 448  
449 449  
... ... @@ -453,114 +453,128 @@
453 453  [[image:image-20220804164747-2.png||height="622" width="594"]]
454 454  
455 455  
456 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
704 += 7. OTA System Update =
457 457  
458 458  
459 -== **Step 1: Configure Frequency Band** ==
707 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
460 460  
461 461  
462 -//Each country has a requirement for frequency region. Choose the right one for your area.//
710 +== 7.1 Auto-update method ==
463 463  
464 -[[image:image-20220905164308-1.png]]
465 465  
713 +The default, each gateway will enable the auto-update function.
466 466  
715 +this function will be triggered every boot and every midnight.
467 467  
468 -== **Step 2: Configure the forward address** ==
469 469  
718 +Users can enable/disable it via Web Page
470 470  
471 -**Select one of the servers to configure.**
720 +[[image:image-20230607094447-2.png]]
472 472  
473 -**For example:**
474 474  
475 -[[image:image-20220905164847-2.png]]
723 +== 7.2 Manual upgrade method ==
476 476  
477 477  
726 +1). Using the Linux command to upgrade the system
478 478  
479 -== **Step 3: Download and Install the Helium-gateway-rs** ==
480 480  
729 +(% class="box infomessage" %)
730 +(((
731 +**apt update && apt install *dragino***
732 +)))
481 481  
482 -**Access the gateway CLI via SSH.**
483 483  
484 -[[image:image-20220905165222-3.png]]
735 +2). Upgrade the system via the Web page button of "Manual Update"
485 485  
486 486  
487 -**Download gateway-rs.**
738 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
488 488  
489 -[[image:image-20220905165715-5.png]]
740 +[[image:image-20230607093849-1.png]]
490 490  
491 -(% class="box infomessage" %)
492 -(((
493 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
494 -)))
495 495  
496 496  
497 -**Install gateway-rs.**
744 += 8. FAQ =
498 498  
499 -[[image:image-20220905165917-7.png]]
746 +== 8.1 How to change Hostname ==
500 500  
748 +
749 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
750 +
501 501  (% class="box infomessage" %)
502 502  (((
503 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
753 +hostnamectl set-hostname dragino-123456
504 504  )))
505 505  
756 +[[image:image-20230517102429-1.png]]
506 506  
507 -**Modify configuration.**
758 +After the configuration is complete, run "reboot" to restart the gateway.
508 508  
509 509  
510 -[[image:image-20220905173847-12.png]]
761 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
511 511  
512 512  
513 -(% class="box infomessage" %)
514 -(((
515 -**region=<Enter regional parameters> \
516 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
517 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
518 -)))
764 +Migrate guide:
519 519  
766 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
520 520  
521 -**Restart the helium_gateway**
768 +**2. On the Server ~-~-> Network Server interface, click "Management"**
522 522  
523 -[[image:image-20220905170920-9.png]]
770 +[[image:image-20230616162454-1.png]]
524 524  
525 525  
526 -(% class="box infomessage" %)
527 -(((
528 -**systemctl restart helium_gateway**
529 -)))
773 +**3. Click "Migrate-Chirpstack"**
530 530  
775 +[[image:image-20230616162742-2.png]]
531 531  
532 -**Check the helium_gateway Log：**
533 533  
534 -[[image:image-20220905173952-13.png]]
778 +**4. Strat Install **
535 535  
536 536  
537 -(% class="box infomessage" %)
538 -(((
539 -**journalctl -u helium_gateway -f**
540 -)))
781 +Click start Install and wait until the migration succeeds
541 541  
783 +[[image:image-20230616162934-3.png]]
542 542  
543 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
544 544  
545 -where the helium gateway log is shown:
786 +**5.Migration complete check result**
546 546  
547 -[[image:image-20220905174534-14.png]]
788 +[[image:image-20230616174526-4.png||height="706" width="983"]]
548 548  
549 549  
550 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
791 +[[image:image-20230616180004-9.png]]
551 551  
552 552  
553 -= 7. OTA System Update =
794 +== 8.3 How to reduce the 4g data consumed ==
554 554  
796 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
555 555  
556 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
557 557  
799 +[[image:image-20230719100239-1.png||height="724" width="994"]]
558 558  
559 -= 8. Trouble Shooting =
560 560  
561 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
802 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
562 562  
804 +[[image:image-20230719100332-2.png]]
563 563  
806 +3. Disable the auto-update:
807 +
808 +[[image:image-20230719100419-3.png||height="458" width="995"]]
809 +
810 +
811 +8.4 How to connect the helium blockchain as a Data-only hotspot
812 +
813 +(% class="box infomessage" %)
814 +(((
815 +apt update && apt install helium-gateway
816 +)))
817 +
818 +
819 +
820 +
821 += 9. Trouble Shooting =
822 +
823 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
824 +
825 +
564 564  [[image:image-20220920135918-1.png]]
565 565  
566 566  
... ... @@ -576,20 +576,73 @@
576 576  [[image:image-20220920141936-2.png]]
577 577  
578 578  
579 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
841 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
580 580  
581 581  
844 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
845 +
846 +[[image:image-20230508171607-1.png]]
847 +
848 +
849 +== 9.3  Fallback IP does not work, how can users check ==
850 +
851 +
852 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
853 +
854 +
855 +**1.Check whether the configuration is correct**
856 +
857 +Run the CMD command to ipconfig and ping 172.31.255.254.
858 +
859 +If this fails, the user needs to reconfigure.
860 +
861 +[[image:image-20230413170224-3.png||height="433" width="707"]]
862 +
863 +[[image:image-20230413170246-4.png]]
864 +
865 +
866 +**2. Check whether the firewall is disabled**
867 +
868 +If the firewall is not down, this will affect access to the gateway.
869 +
870 +
871 +== 9.4  Click "Manual_Update", why there is no response? ==
872 +
873 +
874 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
875 +
876 +
877 +[[image:image-20230527090555-3.png||height="660" width="832"]]
878 +
879 +
880 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
881 +
882 +
883 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
884 +
885 +
886 +(% class="box infomessage" %)
582 582  (((
583 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
888 +apt update && apt install dragino-fallback
889 +
890 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
584 584  )))
585 585  
893 +
894 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
895 +
896 +
586 586  (((
587 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
898 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
899 +)))
588 588  
901 +(((
902 +With your question as detailed as possible. We will reply and help you in the shortest.
589 589  
590 -= 10. Reference =
591 591  
905 += 11. Reference =
592 592  
907 +
593 593  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
594 594  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
595 595  
... ... @@ -596,7 +596,7 @@
596 596  
597 597  )))
598 598  
599 -= 11. Order Info =
914 += 12. Order Info =
600 600  
601 601  
602 602  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -604,23 +604,31 @@
604 604  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
605 605  
606 606  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
922 +
607 607  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
924 +
608 608  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
926 +
609 609  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
928 +
610 610  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
930 +
611 611  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
612 612  
613 613  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
614 614  
615 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
616 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
617 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
618 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
935 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
619 619  
937 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
938 +
939 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
940 +
941 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
942 +
620 620  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
621 621  
622 622  
623 -= 12. Manufacturer Info =
946 += 13. Manufacturer Info =
624 624  
625 625  
626 626  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -630,7 +630,7 @@
630 630  LongCheng Street, LongGang District ; Shenzhen 518116,China
631 631  
632 632  
633 -= 13. FCC Warning =
956 += 14. FCC Warning =
634 634  
635 635  
636 636  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0