Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 122.3 >
edited by Xiaoling
on 2023/01/03 15:53
To version < 69.9 >
edited by Xiaoling
on 2022/07/28 17:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -52,6 +52,8 @@
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
53 +
54 +
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,6 +58,8 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 +
62 +
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 63  * Work Temperature: -20 ~~ 65°C
... ... @@ -65,9 +65,12 @@
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  
68 -== 1.3 Features ==
69 69  
70 70  
72 +
73 +== **1.3 Features** ==
74 +
75 +
71 71  * Open Source Debian system
72 72  * Managed by Web GUI, SSH via WAN or WiFi
73 73  * Remote Management
... ... @@ -85,81 +85,86 @@
85 85  
86 86  
87 87  
88 -== 1.4 Block Diagram ==
89 89  
90 90  
95 +== **1.4 Block Diagram** ==
91 91  
92 -== 1.5 LED Indicators ==
93 93  
94 94  
99 +== **1.5 LED Indicators** ==
100 +
101 +
95 95  LPS8-V2 has totally four LEDs, They are:
96 96  
97 97  
98 98  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
99 99  
100 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
107 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
101 101  
102 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
109 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
103 103  
104 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
111 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
105 105  
106 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
113 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
107 107  
108 108  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 109  
110 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
117 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
111 111  
112 112  
113 -== 1.6 Button Intruction ==
114 114  
121 += **2. Quick Start** =
115 115  
116 -LPS8-V2 has a black toggle button, which is:
117 117  
124 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
118 118  
119 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
126 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
120 120  
121 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
122 122  
123 123  
124 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
130 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
125 125  
126 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
127 127  
133 +== **2.1.1 connect the network.** ==
128 128  
129 -= 2. Quick Start =
135 +=== ===
130 130  
137 +=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
131 131  
132 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
133 133  
134 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
140 +Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
135 135  
142 +You can also use this IP to connect.
136 136  
137 -== 2.1 Connects to the network and accesses the gateway Web UI ==
144 +[[image:image-20220622100129-1.png||height="332" width="1263"]]
138 138  
139 -== 2.1.1 connect the network ==
140 140  
141 141  
142 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 +=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
143 143  
144 144  
145 -(((
146 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
147 -)))
151 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
148 148  
149 -(((
150 -You can also use this IP to connect.
151 -)))
152 152  
153 -[[image:image-20220622100129-1.png||height="332" width="1263"]]
154 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
154 154  
155 155  
156 156  
157 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
158 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
158 158  
160 +1. Connect PC's Ethernet port to LPS8-V2's WAN port
159 159  
160 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
162 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
161 161  
164 +[[image:image-20220622101433-4.png]]
162 162  
166 +
167 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
168 +
169 +
170 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
171 +
172 +
163 163  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
164 164  
165 165  
... ... @@ -173,32 +173,30 @@
173 173  [[image:image-20220622102847-7.png]]
174 174  
175 175  
176 -[[image:image-20220622102901-8.png||height="476" width="938"]]
186 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
177 177  
178 178  
179 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
180 180  
181 -=== 2.2.1 Select your area frequency ===
190 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
182 182  
183 183  
184 -(((
193 +=== **2.2.1 Select your area frequency** ===
194 +
195 +
185 185  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
186 186  
187 -
188 -)))
198 +[[image:image-20220622103332-9.png]]
189 189  
190 -[[image:image-20220622103332-9.png||height="485" width="938"]]
191 191  
192 192  
193 -=== 2.2.2 Get the only gateway EUI ===
202 +=== **2.2.2 Get the only gateway EUI** ===
194 194  
195 195  
196 196  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
197 197  
207 +[[image:image-20220622103355-10.png]]
198 198  
199 -[[image:image-20220622103355-10.png||height="698" width="949"]]
200 200  
201 -
202 202  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
203 203  
204 204  
... ... @@ -214,6 +214,7 @@
214 214  [[image:image-20220622103956-12.png]]
215 215  
216 216  
225 +
217 217  == 2.2.3 Register the gateway to The Things Network ==
218 218  
219 219  
... ... @@ -230,19 +230,20 @@
230 230  **Get it online**
231 231  
232 232  
233 -= 3. Web Configure Pages =
234 234  
235 -== 3.1 Home ==
243 += **3. Web Configure Pages** =
236 236  
237 237  
246 +== **3.1 Home** ==
247 +
248 +
238 238  //Shows the system running status~://
239 239  
240 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
241 241  
252 +== **3.2 LoRa Settings** ==
242 242  
243 -== 3.2 LoRa Settings ==
244 244  
245 -=== 3.2.1 LoRa ~-~-> LoRa ===
255 +=== **3.2.1 LoRa ~-~-> LoRa** ===
246 246  
247 247  
248 248  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -249,123 +249,95 @@
249 249  
250 250  //Different LPS8v2 hardware versions can support different frequency ranges~://
251 251  
252 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
262 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
253 253  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
254 254  
255 255  (% class="wikigeneratedid" %)
256 256  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
257 257  
258 -
259 259  (% class="wikigeneratedid" %)
260 260  [[image:image-20220616110739-1.png||height="372" width="682"]]
261 261  
262 262  
263 263  (((
264 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
273 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
265 265  )))
266 266  
267 267  
268 -== 3.3 LoRaWAN Settings ==
269 269  
270 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
278 +== **3.3 LoRaWAN Settings** ==
271 271  
272 272  
273 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
281 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
274 274  
275 275  
284 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
285 +
276 276  [[image:image-20220616111932-2.png||height="516" width="672"]]
277 277  
278 278  
279 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
280 280  
290 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
281 281  
292 +
282 282  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
283 283  
284 -
285 285  [[image:image-20220616113246-3.png||height="396" width="672"]]
286 286  
287 287  
288 -(((
289 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
290 -)))
298 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
291 291  
292 292  
293 -== 3.4 Network Settings ==
294 294  
295 -=== 3.4.1 Network ~-~-> WiFi ===
302 +== **3.4 Network Settings** ==
296 296  
297 297  
298 -[[image:image-20220616114756-4.png||height="251" width="669"]]
305 +=== **3.4.1 Network ~-~-> WiFi** ===
299 299  
300 300  
301 -=== 3.4.2 Network ~-~-> System Status ===
308 +[[image:image-20220616114756-4.png||height="251" width="669"]]
302 302  
303 303  
304 -[[image:image-20220820134112-2.png||height="539" width="668"]]
305 305  
312 +=== **3.4.2 Network ~-~-> System Status** ===
306 306  
307 -=== 3.4.3 Network ~-~-> Firewall ===
308 308  
315 +[[image:image-20220616115229-5.png||height="548" width="665"]]
309 309  
310 -[[image:image-20220616115351-6.png||height="244" width="661"]]
311 311  
312 312  
313 -== 3.5 System ==
319 +=== **3.4.3 Network ~-~-> Firewall** ===
314 314  
315 -=== 3.5.1 System ~-~-> System Overview ===
316 316  
322 +[[image:image-20220616115351-6.png||height="244" width="661"]]
317 317  
318 -Shows the system info:
319 319  
320 -[[image:image-20220917144512-5.png||height="618" width="853"]]
321 321  
326 +== **3.5 System** ==
322 322  
323 -=== 3.5.2 System ~-~-> Backup/Restore ===
324 324  
329 +=== **3.5.1  System ~-~-> System Overview** ===
325 325  
326 -[[image:image-20220917144725-6.png||height="208" width="869"]]
327 327  
332 +Shows the system info:
328 328  
329 -=== 3.5.3 System ~-~-> Remoteit ===
330 330  
331 331  
332 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
336 +=== **3.5.2 System ~-~-> Backup/Restore** ===
333 333  
334 334  
335 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
339 +[[image:image-20220616115808-7.png||height="194" width="649"]]
336 336  
337 -[[image:image-20221230092303-2.png]]
338 338  
339 339  
340 -= 4. Build-in Server =
343 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
341 341  
342 342  
343 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
346 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
344 344  
348 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
345 345  
346 -[[image:image-20220820115644-1.png||height="217" width="778"]]
347 347  
348 -
349 -(% style="color:red" %)**Note:**
350 -
351 - **Path**: System ~-~-> Built-in Server
352 -
353 -
354 -**Troubleshooting:**
355 -
356 -
357 -**~ 1. URL does not jump properly**
358 -
359 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
360 -
361 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
362 -
363 -
364 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
365 -
366 -
367 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
368 -
369 369  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
370 370  
371 371  
... ... @@ -379,189 +379,52 @@
379 379  [[image:image-20220725171719-1.png||height="570" width="769"]]
380 380  
381 381  
382 -== 4.2 Application Server ~-~- Node-Red ==
364 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
365 + You can complete the installation manually with the following command.**
383 383  
384 384  
385 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
386 -
387 -
388 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
389 -
390 -
391 -[[image:image-20220725172124-3.png||height="610" width="843"]]
392 -
393 -
394 -
395 -=== **Using Node-Red, InfluxDB and Grafana** ===
396 -
397 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
398 -
399 -
400 -the users can refer to this link to install them.
401 -
402 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
403 -
404 -
405 -= 5. How users can access LPS8v2 using serial USB =
406 -
407 -
408 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
409 -
410 -
411 -Port 1 of the UART on the LPS8v2 is GND
412 -
413 413  (% class="box infomessage" %)
414 414  (((
415 -**TXD  <~-~--> UART RXD (Gray line)**
370 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
416 416  
417 -**RXD  <~-~--> UART TXD (White line)**
418 -
419 -**GND <~-~--> GND (Black line)**
372 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
420 420  )))
421 421  
422 422  
423 -**LPS8v2 UART connection photo**
424 424  
425 -[[image:image-20220804163015-1.png||height="621" width="466"]]
377 += **5. Build-in Application Server ~-~- Node-Red** =
426 426  
427 427  
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
428 428  
429 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
382 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
430 430  
431 431  
432 -[[image:image-20220804164928-3.png||height="320" width="332"]]
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
433 433  
434 434  
435 -[[image:image-20220804164747-2.png||height="622" width="594"]]
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
436 436  
437 437  
438 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
391 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
392 + You can complete the installation manually with the following command.**
439 439  
440 440  
441 -== **Step 1: Configure Frequency Band** ==
442 442  
443 -
444 -//Each country has a requirement for frequency region. Choose the right one for your area.//
445 -
446 -[[image:image-20220905164308-1.png]]
447 -
448 -
449 -
450 -== **Step 2: Configure the forward address** ==
451 -
452 -
453 -**Select one of the servers to configure.**
454 -
455 -**For example:**
456 -
457 -[[image:image-20220905164847-2.png]]
458 -
459 -
460 -
461 -== **Step 3: Download and Install the Helium-gateway-rs** ==
462 -
463 -
464 -**Access the gateway CLI via SSH.**
465 -
466 -[[image:image-20220905165222-3.png]]
467 -
468 -
469 -**Download gateway-rs.**
470 -
471 -[[image:image-20220905165715-5.png]]
472 -
473 473  (% class="box infomessage" %)
474 474  (((
475 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
398 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
399 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
476 476  )))
477 477  
402 +[[image:image-20220728102000-1.png]]
478 478  
479 -**Install gateway-rs.**
480 480  
481 -[[image:image-20220905165917-7.png]]
482 482  
483 -(% class="box infomessage" %)
484 -(((
485 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
486 -)))
406 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
487 487  
488 488  
489 -**Modify configuration.**
490 -
491 -
492 -[[image:image-20220905173847-12.png]]
493 -
494 -
495 -(% class="box infomessage" %)
496 496  (((
497 -**region=<Enter regional parameters> \
498 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
499 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
500 -)))
501 -
502 -
503 -**Restart the helium_gateway**
504 -
505 -[[image:image-20220905170920-9.png]]
506 -
507 -
508 -(% class="box infomessage" %)
509 -(((
510 -**systemctl restart helium_gateway**
511 -)))
512 -
513 -
514 -**Check the helium_gateway Log：**
515 -
516 -[[image:image-20220905173952-13.png]]
517 -
518 -
519 -(% class="box infomessage" %)
520 -(((
521 -**journalctl -u helium_gateway -f**
522 -)))
523 -
524 -
525 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
526 -
527 -where the helium gateway log is shown:
528 -
529 -[[image:image-20220905174534-14.png]]
530 -
531 -
532 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
533 -
534 -
535 -= 7. OTA System Update =
536 -
537 -
538 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
539 -
540 -
541 -= 8. Trouble Shooting =
542 -
543 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
544 -
545 -
546 -[[image:image-20220920135918-1.png]]
547 -
548 -
549 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
550 -
551 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
552 -
553 -
554 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
555 -
556 -**Click the update URL button to configure the URL with the current eth port address.**
557 -
558 -[[image:image-20220920141936-2.png]]
559 -
560 -
561 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
562 -
563 -
564 -(((
565 565  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
566 566  )))
567 567  
... ... @@ -569,17 +569,16 @@
569 569  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
570 570  
571 571  
572 -= 10. Reference =
573 573  
418 += **11 Reference** =
574 574  
420 +
575 575  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
576 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
577 577  
578 -
579 579  
580 580  )))
581 581  
582 -= 11. Order Info =
426 += **12. Order Info** =
583 583  
584 584  
585 585  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -593,6 +593,7 @@
593 593  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
594 594  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
595 595  
440 +
596 596  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
597 597  
598 598  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -603,9 +603,10 @@
603 603  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
604 604  
605 605  
606 -= 12. Manufacturer Info =
607 607  
452 += **13. Manufacturer Info** =
608 608  
454 +
609 609  **Shenzhen Dragino Technology Development co. LTD**
610 610  
611 611  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -613,38 +613,23 @@
613 613  LongCheng Street, LongGang District ; Shenzhen 518116,China
614 614  
615 615  
616 -= 13. FCC Warning =
617 617  
463 += **14. FCC Warning** =
618 618  
619 -(((
465 +
620 620  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
621 -)))
622 622  
623 -(((
624 624  ~-~- Reorient or relocate the receiving antenna.
625 -)))
626 626  
627 -(((
628 628  ~-~- Increase the separation between the equipment and receiver.
629 -)))
630 630  
631 -(((
632 632  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
633 -)))
634 634  
635 -(((
636 636  ~-~- Consult the dealer or an experienced radio/TV technician for help.
637 -)))
638 638  
639 639  
640 -(((
641 641  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
642 -)))
643 643  
644 644  
645 -(((
646 646  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
647 -
648 -
649 649  )))
650 -)))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0