<
From version < 122.2 >
edited by Xiaoling
on 2022/12/30 17:45
To version < 82.1 >
edited by Xiaoye
on 2022/08/20 13:41
>
Change comment: Uploaded new attachment "image-20220820134112-2.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -64,11 +64,9 @@
64 64  * Storage Temperature: -20 ~~ 65°C
65 65  * Power Input: 5V, 2A, DC
66 66  
65 +== **1.3 Features** ==
67 67  
68 68  
69 -== 1.3 Features ==
70 -
71 -
72 72  * Open Source Debian system
73 73  * Managed by Web GUI, SSH via WAN or WiFi
74 74  * Remote Management
... ... @@ -84,62 +84,47 @@
84 84  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 85  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 86  
83 +== **1.4 Block Diagram** ==
87 87  
88 88  
89 -== 1.4 Block Diagram ==
90 90  
87 +== **1.5 LED Indicators** ==
91 91  
92 92  
93 -== 1.5 LED Indicators ==
94 -
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 99  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
108 108  
109 109  // ✓** SOLID RED:** Device doesn't have an Internet connection.//
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
112 112  
113 113  
114 -== 1.6 Button Intruction ==
115 115  
109 += **2. Quick Start** =
116 116  
117 -LPS8-V2 has a black toggle button, which is:
118 118  
119 -
120 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 -
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123 -
124 -
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
126 -
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128 -
129 -
130 -= 2. Quick Start =
131 -
132 -
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
138 -== 2.1 Connects to the network and accesses the gateway Web UI ==
139 139  
140 -== 2.1.1 connect the network ==
118 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
141 141  
142 142  
121 +== **2.1.1 connect the network.** ==
122 +
123 +
143 143  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
144 144  
145 145  
... ... @@ -161,6 +161,27 @@
161 161  [[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 163  
145 +(((
146 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
147 +)))
148 +
149 +
150 +
151 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
152 +
153 +~1. Connect PC's Ethernet port to LPS8-V2's WAN port
154 +
155 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
156 +
157 +[[image:image-20220622101433-4.png]]
158 +
159 +
160 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
161 +
162 +
163 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
164 +
165 +
164 164  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
165 165  
166 166  
... ... @@ -174,32 +174,32 @@
174 174  [[image:image-20220622102847-7.png]]
175 175  
176 176  
177 -[[image:image-20220622102901-8.png||height="476" width="938"]]
179 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
178 178  
179 179  
180 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
181 181  
182 -=== 2.2.1 Select your area frequency ===
183 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
183 183  
184 184  
186 +=== **2.2.1 Select your area frequency** ===
187 +
188 +
185 185  (((
186 186  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
187 -
188 -
189 189  )))
190 190  
191 -[[image:image-20220622103332-9.png||height="485" width="938"]]
193 +[[image:image-20220622103332-9.png]]
192 192  
193 193  
194 -=== 2.2.2 Get the only gateway EUI ===
195 195  
197 +=== **2.2.2 Get the only gateway EUI** ===
196 196  
199 +
197 197  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
198 198  
202 +[[image:image-20220622103355-10.png]]
199 199  
200 -[[image:image-20220622103355-10.png||height="698" width="949"]]
201 201  
202 -
203 203  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
204 204  
205 205  
... ... @@ -215,6 +215,7 @@
215 215  [[image:image-20220622103956-12.png]]
216 216  
217 217  
220 +
218 218  == 2.2.3 Register the gateway to The Things Network ==
219 219  
220 220  
... ... @@ -231,19 +231,20 @@
231 231  **Get it online**
232 232  
233 233  
234 -= 3. Web Configure Pages =
235 235  
236 -== 3.1 Home ==
238 += **3. Web Configure Pages** =
237 237  
238 238  
241 +== **3.1 Home** ==
242 +
243 +
239 239  //Shows the system running status~://
240 240  
241 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
242 242  
247 +== **3.2 LoRa Settings** ==
243 243  
244 -== 3.2 LoRa Settings ==
245 245  
246 -=== 3.2.1 LoRa ~-~-> LoRa ===
250 +=== **3.2.1 LoRa ~-~-> LoRa** ===
247 247  
248 248  
249 249  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -250,123 +250,97 @@
250 250  
251 251  //Different LPS8v2 hardware versions can support different frequency ranges~://
252 252  
253 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
257 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
254 254  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
255 255  
256 256  (% class="wikigeneratedid" %)
257 257  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
258 258  
259 -
260 260  (% class="wikigeneratedid" %)
261 261  [[image:image-20220616110739-1.png||height="372" width="682"]]
262 262  
263 263  
264 264  (((
265 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
268 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
266 266  )))
267 267  
268 268  
269 -== 3.3 LoRaWAN Settings ==
270 270  
271 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
273 +== **3.3 LoRaWAN Settings** ==
272 272  
273 273  
274 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
276 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
275 275  
276 276  
279 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +
277 277  [[image:image-20220616111932-2.png||height="516" width="672"]]
278 278  
279 279  
280 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
281 281  
285 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
282 282  
287 +
283 283  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
284 284  
285 -
286 286  [[image:image-20220616113246-3.png||height="396" width="672"]]
287 287  
288 288  
289 289  (((
290 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
294 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
291 291  )))
292 292  
293 293  
294 -== 3.4 Network Settings ==
295 295  
296 -=== 3.4.1 Network ~-~-> WiFi ===
299 +== **3.4 Network Settings** ==
297 297  
298 298  
299 -[[image:image-20220616114756-4.png||height="251" width="669"]]
302 +=== **3.4.1 Network ~-~-> WiFi** ===
300 300  
301 301  
302 -=== 3.4.2 Network ~-~-> System Status ===
305 +[[image:image-20220616114756-4.png||height="251" width="669"]]
303 303  
304 304  
305 -[[image:image-20220820134112-2.png||height="539" width="668"]]
306 306  
309 +=== **3.4.2 Network ~-~-> System Status** ===
307 307  
308 -=== 3.4.3 Network ~-~-> Firewall ===
309 309  
312 +[[image:image-20220616115229-5.png||height="548" width="665"]]
310 310  
311 -[[image:image-20220616115351-6.png||height="244" width="661"]]
312 312  
313 313  
314 -== 3.5 System ==
316 +=== **3.4.3 Network ~-~-> Firewall** ===
315 315  
316 -=== 3.5.1 System ~-~-> System Overview ===
317 317  
319 +[[image:image-20220616115351-6.png||height="244" width="661"]]
318 318  
319 -Shows the system info:
320 320  
321 -[[image:image-20220917144512-5.png||height="618" width="853"]]
322 322  
323 +== **3.5 System** ==
323 323  
324 -=== 3.5.2 System ~-~-> Backup/Restore ===
325 325  
326 +=== **3.5.1  System ~-~-> System Overview** ===
326 326  
327 -[[image:image-20220917144725-6.png||height="208" width="869"]]
328 328  
329 +Shows the system info:
329 329  
330 -=== 3.5.3 System ~-~-> Remoteit ===
331 331  
332 332  
333 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
333 +=== **3.5.2 System ~-~-> Backup/Restore** ===
334 334  
335 335  
336 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
336 +[[image:image-20220616115808-7.png||height="194" width="649"]]
337 337  
338 -[[image:image-20221230092303-2.png]]
339 339  
340 340  
341 -= 4. Build-in Server =
340 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
342 342  
343 343  
344 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
343 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
345 345  
345 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
346 346  
347 -[[image:image-20220820115644-1.png||height="217" width="778"]]
348 348  
349 -
350 -(% style="color:red" %)**Note:**
351 -
352 - **Path**: System ~-~-> Built-in Server
353 -
354 -
355 -**Troubleshooting:**
356 -
357 -
358 -**~ 1. URL does not jump properly**
359 -
360 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
361 -
362 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
363 -
364 -
365 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
366 -
367 -
368 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
369 -
370 370  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
371 371  
372 372  
... ... @@ -380,188 +380,86 @@
380 380  [[image:image-20220725171719-1.png||height="570" width="769"]]
381 381  
382 382  
383 -== 4.2 Application Server ~-~- Node-Red ==
361 +(((
362 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with the TTN-Stack
363 + You can complete the installation manually with the following command.**
364 +)))
384 384  
385 385  
386 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
387 -
388 -
389 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
390 -
391 -
392 -[[image:image-20220725172124-3.png||height="610" width="843"]]
393 -
394 -
395 -
396 -=== **Using Node-Red, InfluxDB and Grafana** ===
397 -
398 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
399 -
400 -
401 -the users can refer to this link to install them.
402 -
403 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
404 -
405 -
406 -= 5. How users can access LPS8v2 using serial USB =
407 -
408 -
409 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
410 -
411 -
412 -Port 1 of the UART on the LPS8v2 is GND
413 -
414 414  (% class="box infomessage" %)
415 415  (((
416 -**TXD  <~-~--> UART RXD (Gray line)**
417 -
418 -**RXD  <~-~--> UART TXD (White line)**
419 -
420 -**GND <~-~--> GND (Black line)**
369 +(((
370 +(% style="background-color:#fcf8e3" %)cd /tmp && wget [[http:~~/~~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh>>http://repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh]]
371 +chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
421 421  )))
373 +)))
422 422  
423 423  
424 -**LPS8v2 UART connection photo**
425 425  
426 -[[image:image-20220804163015-1.png||height="621" width="466"]]
377 += **5. Build-in Application Server ~-~- Node-Red** =
427 427  
428 428  
380 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
429 429  
430 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
382 +You can access the gateway'built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:808or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
431 431  
432 432  
433 -[[image:image-20220804164928-3.png||height="320" width="332"]]
385 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
434 434  
435 435  
436 -[[image:image-20220804164747-2.png||height="622" width="594"]]
388 +[[image:image-20220725172124-3.png||height="610" width="843"]]
437 437  
438 438  
439 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
440 -
441 -
442 -== **Step 1: Configure Frequency Band** ==
443 -
444 -
445 -//Each country has a requirement for frequency region. Choose the right one for your area.//
446 -
447 -[[image:image-20220905164308-1.png]]
448 -
449 -
450 -
451 -== **Step 2: Configure the forward address** ==
452 -
453 -
454 -**Select one of the servers to configure.**
455 -
456 -**For example:**
457 -
458 -[[image:image-20220905164847-2.png]]
459 -
460 -
461 -
462 -== **Step 3: Download and Install the Helium-gateway-rs** ==
463 -
464 -
465 -**Access the gateway CLI via SSH.**
466 -
467 -[[image:image-20220905165222-3.png]]
468 -
469 -
470 -**Download gateway-rs.**
471 -
472 -[[image:image-20220905165715-5.png]]
473 -
474 -(% class="box infomessage" %)
475 475  (((
476 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
392 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
393 + You can complete the installation manually with the following command.**
477 477  )))
478 478  
479 479  
480 -**Install gateway-rs.**
481 481  
482 -[[image:image-20220905165917-7.png]]
483 -
484 484  (% class="box infomessage" %)
485 485  (((
486 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
400 +(((
401 +(% style="background-color:#fcf8e3" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
402 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
487 487  )))
404 +)))
488 488  
406 +[[image:image-20220728102000-1.png]]
489 489  
490 -**Modify configuration.**
491 491  
409 += **6. How users can access LPS8v2 using serial USB** =
492 492  
493 -[[image:image-20220905173847-12.png]]
494 494  
412 +**USB TTL to LPS8v2  Connection:**
495 495  
496 -(% class="box infomessage" %)
497 -(((
498 -**region=<Enter regional parameters> \
499 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
500 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
501 -)))
414 +Port 1 of the UART on the LPS8v2 is GND
502 502  
503 -
504 -**Restart the helium_gateway**
505 -
506 -[[image:image-20220905170920-9.png]]
507 -
508 -
509 509  (% class="box infomessage" %)
510 510  (((
511 -**systemctl restart helium_gateway**
512 -)))
418 +TXD  <~-~--> UART RXD (Gray line)
513 513  
420 +RXD  <~-~--> UART TXD (White line)
514 514  
515 -**Check the helium_gateway Log:**
516 -
517 -[[image:image-20220905173952-13.png]]
518 -
519 -
520 -(% class="box infomessage" %)
521 -(((
522 -**journalctl -u helium_gateway -f**
422 +GND <~-~--> GND (Black line)
523 523  )))
524 524  
525 525  
526 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
426 +**LPS8v2 UART connection photo**
527 527  
528 -where the helium gateway log is shown:
428 +[[image:image-20220804163015-1.png||height="621" width="466"]]
529 529  
530 -[[image:image-20220905174534-14.png]]
531 531  
532 532  
533 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
432 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
534 534  
434 +[[image:image-20220804164928-3.png||height="320" width="332"]]
535 535  
536 -= 7. OTA System Update =
436 +[[image:image-20220804164747-2.png||height="622" width="594"]]
537 537  
438 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
538 538  
539 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
540 540  
541 -
542 -= 8. Trouble Shooting =
543 -
544 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
545 -
546 -
547 -[[image:image-20220920135918-1.png]]
548 -
549 -
550 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
551 -
552 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
553 -
554 -
555 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
556 -
557 -**Click the update URL button to configure the URL with the current eth port address.**
558 -
559 -[[image:image-20220920141936-2.png]]
560 -
561 -
562 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
563 -
564 -
565 565  (((
566 566  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
567 567  )))
... ... @@ -570,17 +570,17 @@
570 570  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
571 571  
572 572  
573 -= 10. Reference =
574 574  
450 += **11 Reference** =
575 575  
452 +
576 576  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
577 577  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
578 578  
579 -
580 580  
581 581  )))
582 582  
583 -= 11. Order Info =
459 += **12. Order Info** =
584 584  
585 585  
586 586  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -604,9 +604,10 @@
604 604  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
605 605  
606 606  
607 -= 12. Manufacturer Info =
608 608  
484 += **13. Manufacturer Info** =
609 609  
486 +
610 610  **Shenzhen Dragino Technology Development co. LTD**
611 611  
612 612  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -614,9 +614,10 @@
614 614  LongCheng Street, LongGang District ; Shenzhen 518116,China
615 615  
616 616  
617 -= 13. FCC Warning =
618 618  
495 += **14. FCC Warning** =
619 619  
497 +
620 620  (((
621 621  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
622 622  )))
... ... @@ -645,7 +645,5 @@
645 645  
646 646  (((
647 647  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
648 -
649 -
650 650  )))
651 651  )))
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0