Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 122.1 >
edited by Kilight Cao
on 2022/12/30 09:40
To version < 229.1 >
edited by Kilight Cao
on 2023/06/19 10:20
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,11 +57,13 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  == 1.3 Features ==
... ... @@ -79,35 +79,31 @@
79 79  ** Semtech UDP Packet Forwarder
80 80  ** LoRaWAN Basic Station
81 81  ** ChirpStack-Gateway-Bridge (MQTT)
82 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
84 84  
85 -== 1.4 Block Diagram ==
87 +== 1.4 LED Indicators ==
86 86  
87 87  
88 -
89 -== 1.5 LED Indicators ==
90 -
91 -
92 92  LPS8-V2 has totally four LEDs, They are:
93 93  
94 94  
95 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
100 100  
101 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
102 102  
103 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
104 104  
105 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
106 106  
107 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
108 108  
109 109  
110 -== 1.6 Button Intruction ==
108 +== 1.5 Button Intruction ==
111 111  
112 112  
113 113  LPS8-V2 has a black toggle button, which is:
... ... @@ -115,12 +115,12 @@
115 115  
116 116  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
119 119  
120 120  
121 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
122 122  
123 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
124 124  
125 125  
126 126  = 2. Quick Start =
... ... @@ -133,14 +133,29 @@
133 133  
134 134  == 2.1 Connects to the network and accesses the gateway Web UI ==
135 135  
136 -== 2.1.1 connect the network ==
134 +=== 2.1.1 connect the network ===
137 137  
138 138  
139 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
140 140  
141 141  
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
141 +
142 +(% style="background-color:yellow" %)**dragino+dragino**
143 +
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
145 +
146 +[[image:image-20230527084515-1.png]]
147 +
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
149 +
150 +
151 +
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
153 +
154 +
142 142  (((
143 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
156 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
144 144  )))
145 145  
146 146  (((
... ... @@ -151,9 +151,40 @@
151 151  
152 152  
153 153  
154 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
155 155  
156 156  
170 +[[image:image-20230107084650-2.png||height="310" width="839"]]
171 +
172 +
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
174 +
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 +
177 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
178 +
179 +
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
181 +
182 +
183 +As in the below photo:
184 +
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 +
187 +
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 +
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 +
192 +
193 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 +
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 +
197 +
198 +
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
157 157  [[image:image-20220622100542-2.png||height="369" width="1256"]]
158 158  
159 159  
... ... @@ -173,11 +173,104 @@
173 173  [[image:image-20220622102901-8.png||height="476" width="938"]]
174 174  
175 175  
176 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
220 +=== 2.1.2 Access Configure Web UI ===
177 177  
178 -=== 2.2.1 Select your area frequency ===
179 179  
223 +**Web Interface**
180 180  
225 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
226 +
227 +
228 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 +
230 +You will see the login interface of LPS8-V2 as shown below.
231 +
232 +The account details for Web Login are:
233 +
234 +(% style="color:blue" %)**User Name: root**
235 +
236 +(% style="color:blue" %)**Password:   dragino**
237 +
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
239 +
240 +
241 +== 2.2  Typical Network Setup ==
242 +
243 +=== 2.2.1  Overview ===
244 +
245 +
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
181 181  (((
182 182  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
183 183  
... ... @@ -187,7 +187,7 @@
187 187  [[image:image-20220622103332-9.png||height="485" width="938"]]
188 188  
189 189  
190 -=== 2.2.2 Get the only gateway EUI ===
327 +=== 2.3.2 Get the only gateway EUI ===
191 191  
192 192  
193 193  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -211,7 +211,7 @@
211 211  [[image:image-20220622103956-12.png]]
212 212  
213 213  
214 -== 2.2.3 Register the gateway to The Things Network ==
351 +=== 2.3.3 Register the gateway to The Things Network ===
215 215  
216 216  
217 217  **Login to The Things Network**
... ... @@ -232,7 +232,7 @@
232 232  == 3.1 Home ==
233 233  
234 234  
235 -//Shows the system running status~://
372 +Shows the system running status:
236 236  
237 237  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
238 238  
... ... @@ -242,15 +242,15 @@
242 242  === 3.2.1 LoRa ~-~-> LoRa ===
243 243  
244 244  
245 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
246 246  
247 -//Different LPS8v2 hardware versions can support different frequency ranges~://
384 +Different LPS8v2 hardware versions can support different frequency ranges:
248 248  
249 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
250 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
251 251  
252 252  (% class="wikigeneratedid" %)
253 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
254 254  
255 255  
256 256  (% class="wikigeneratedid" %)
... ... @@ -267,7 +267,7 @@
267 267  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
268 268  
269 269  
270 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
271 271  
272 272  
273 273  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -276,7 +276,7 @@
276 276  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
277 277  
278 278  
279 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
280 280  
281 281  
282 282  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -291,8 +291,9 @@
291 291  
292 292  === 3.4.1 Network ~-~-> WiFi ===
293 293  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
294 294  
295 -[[image:image-20220616114756-4.png||height="251" width="669"]]
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
296 296  
297 297  
298 298  === 3.4.2 Network ~-~-> System Status ===
... ... @@ -301,12 +301,29 @@
301 301  [[image:image-20220820134112-2.png||height="539" width="668"]]
302 302  
303 303  
304 -=== 3.4.3 Network ~-~-> Firewall ===
442 +=== 3.4.3 Network ~-~-> Network ===
305 305  
306 306  
307 -[[image:image-20220616115351-6.png||height="244" width="661"]]
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
308 308  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
309 309  
449 +
450 +=== 3.4.4 Network ~-~-> Cellular ===
451 +
452 +
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
454 +
455 +(% style="color:red" %)**Note: APN cannot be empty.**
456 +
457 +[[image:image-20230228115126-1.png]]
458 +
459 +
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
461 +
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
463 +
464 +
310 310  == 3.5 System ==
311 311  
312 312  === 3.5.1 System ~-~-> System Overview ===
... ... @@ -317,16 +317,26 @@
317 317  [[image:image-20220917144512-5.png||height="618" width="853"]]
318 318  
319 319  
320 -=== 3.5.2 System ~-~-> Backup/Restore ===
475 +=== 3.5.2 System ~-~-> System General ===
321 321  
322 322  
478 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
479 +
480 +In addition, Users can customize the FallBack IP address.
481 +
482 +[[image:image-20230214094058-3.png]]
483 +
484 +
485 +=== 3.5.3 System ~-~-> Backup/Restore ===
486 +
487 +
323 323  [[image:image-20220917144725-6.png||height="208" width="869"]]
324 324  
325 325  
326 -=== 3.5.3 System ~-~-> Remoteit ===
491 +=== 3.5.4 System ~-~-> Remoteit ===
327 327  
328 328  
329 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
494 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
330 330  
331 331  
332 332  the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
... ... @@ -334,34 +334,46 @@
334 334  [[image:image-20221230092303-2.png]]
335 335  
336 336  
502 +=== 3.5.5 System ~-~-> Package Management ===
503 +
504 +
505 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 +
507 +[[image:image-20230214094316-4.png]]
508 +
509 +
337 337  = 4. Build-in Server =
338 338  
339 339  
340 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
341 341  
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
342 342  
343 -[[image:image-20220820115644-1.png||height="217" width="778"]]
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
344 344  
345 345  
520 +
346 346  (% style="color:red" %)**Note:**
347 347  
348 - **Path**: System ~-~-> Built-in Server
523 + **Path**: Server ~-~-> Network Server
349 349  
525 + Server ~-~-> Application Server
350 350  
527 +
351 351  **Troubleshooting:**
352 352  
353 353  
354 354  **~ 1. URL does not jump properly**
355 355  
356 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
357 357  
358 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
359 359  
360 360  
361 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
362 362  
363 363  
364 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
365 365  
366 366  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
367 367  
... ... @@ -368,14 +368,25 @@
368 368  
369 369  Login account:
370 370  
371 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 +**Username : ** (% style="background-color:yellow" %)**admin**
372 372  
373 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
374 374  
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
375 375  
376 -[[image:image-20220725171719-1.png||height="570" width="769"]]
377 377  
378 378  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
557 +
558 +
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
560 +
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +
563 +[[image:image-20230321092456-1.png]]
564 +
565 +
566 +
379 379  == 4.2 Application Server ~-~- Node-Red ==
380 380  
381 381  
... ... @@ -399,147 +399,211 @@
399 399  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
400 400  
401 401  
402 -= 5. How users can access LPS8v2 using serial USB =
590 +=== **Upgrade the node.js** ===
403 403  
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
404 404  
405 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
406 406  
595 +the users can refer to this link to upgrade them.
407 407  
408 -Port 1 of the UART on the LPS8v2 is GND
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
409 409  
410 -(% class="box infomessage" %)
411 -(((
412 -**TXD  <~-~--> UART RXD (Gray line)**
413 413  
414 -**RXD  <~-~--> UART TXD (White line)**
600 +== 4.3 How to disable the built-in server ==
415 415  
416 -**GND <~-~--> GND (Black line)**
417 -)))
418 418  
603 +Use the following commands to start and stop the TTNv3 service:
419 419  
420 -**LPS8v2 UART connection photo**
605 +(% class="box infomessage" %)
606 +(((
607 +**# start**
608 +systemctl start ttnstack
421 421  
422 -[[image:image-20220804163015-1.png||height="621" width="466"]]
610 +**# stop**
611 +systemctl stop ttnstack
423 423  
613 +**# enable**
614 +systemctl enable ttnstack
424 424  
616 +**#disable**
617 +systemctl disable ttnstack
618 +)))
425 425  
426 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
620 +Use the following commands to start and stop the Node-Red service:
427 427  
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
428 428  
429 -[[image:image-20220804164928-3.png||height="320" width="332"]]
627 +**# stop**
628 +systemctl stop nodered
430 430  
630 +**# enable**
631 +systemctl enable nodered
431 431  
432 -[[image:image-20220804164747-2.png||height="622" width="594"]]
633 +**#disable**
634 +systemctl disable nodered
635 +)))
433 433  
434 434  
435 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
436 436  
437 437  
438 -== **Step 1: Configure Frequency Band** ==
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
439 439  
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
440 440  
441 -//Each country has a requirement for frequency region. Choose the right one for your area.//
442 442  
443 -[[image:image-20220905164308-1.png]]
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
444 444  
445 445  
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
446 446  
447 -== **Step 2: Configure the forward address** ==
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
448 448  
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
449 449  
450 -**Select one of the servers to configure.**
451 451  
452 -**For example:**
656 +When the configuration is complete, click** "Save&Apply"**.
453 453  
454 -[[image:image-20220905164847-2.png]]
455 455  
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
456 456  
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
457 457  
458 -== **Step 3: Download and Install the Helium-gateway-rs** ==
459 459  
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
460 460  
461 -**Access the gateway CLI via SSH.**
462 462  
463 -[[image:image-20220905165222-3.png]]
464 464  
668 += 6. How users can access LPS8-V2 using serial USB =
465 465  
466 -**Download gateway-rs.**
467 467  
468 -[[image:image-20220905165715-5.png]]
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
469 469  
673 +
674 +Port 1 of the UART on the LPS8-V2 is GND
675 +
470 470  (% class="box infomessage" %)
471 471  (((
472 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
678 +**TXD  <~-~--> UART RXD (Gray line)**
679 +
680 +**RXD  <~-~--> UART TXD (White line)**
681 +
682 +**GND <~-~--> GND (Black line)**
473 473  )))
474 474  
475 475  
476 -**Install gateway-rs.**
686 +**LPS8v2 UART connection photo**
477 477  
478 -[[image:image-20220905165917-7.png]]
479 479  
480 -(% class="box infomessage" %)
481 -(((
482 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
483 -)))
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
484 484  
691 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
485 485  
486 -**Modify configuration.**
487 487  
694 +[[image:image-20220804164928-3.png||height="320" width="332"]]
488 488  
489 -[[image:image-20220905173847-12.png]]
490 490  
697 +[[image:image-20220804164747-2.png||height="622" width="594"]]
491 491  
492 -(% class="box infomessage" %)
493 -(((
494 -**region=<Enter regional parameters> \
495 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
496 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
497 -)))
498 498  
700 += 7. OTA System Update =
499 499  
500 -**Restart the helium_gateway**
501 501  
502 -[[image:image-20220905170920-9.png]]
703 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
503 503  
504 504  
706 +== 7.1 Auto-update method ==
707 +
708 +
709 +The default, each gateway will enable the auto-update function.
710 +
711 +this function will be triggered every boot and every midnight.
712 +
713 +
714 +Users can enable/disable it via Web Page
715 +
716 +[[image:image-20230607094447-2.png]]
717 +
718 +
719 +== 7.2 Manual upgrade method ==
720 +
721 +
722 +1). Using the Linux command to upgrade the system
723 +
724 +
505 505  (% class="box infomessage" %)
506 506  (((
507 -**systemctl restart helium_gateway**
727 +**apt update && apt install *dragino***
508 508  )))
509 509  
510 510  
511 -**Check the helium_gateway Log：**
731 +2). Upgrade the system via the Web page button of "Manual Update"
512 512  
513 -[[image:image-20220905173952-13.png]]
514 514  
734 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
515 515  
736 +[[image:image-20230607093849-1.png]]
737 +
738 +
739 += 8. FAQ =
740 +
741 +== 8.1 How to change Hostname ==
742 +
743 +
744 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
745 +
516 516  (% class="box infomessage" %)
517 517  (((
518 -**journalctl -u helium_gateway -f**
748 +hostnamectl set-hostname dragino-123456
519 519  )))
520 520  
751 +[[image:image-20230517102429-1.png]]
521 521  
522 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
753 +After the configuration is complete, run "reboot" to restart the gateway.
523 523  
524 -where the helium gateway log is shown:
525 525  
526 -[[image:image-20220905174534-14.png]]
756 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
527 527  
528 528  
529 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
759 +Migrate guide:
530 530  
761 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
531 531  
532 -= 7. OTA System Update =
763 +**2. On the Server ~-~-> Network Server interface, click "Management"**
533 533  
765 +[[image:image-20230616162454-1.png]]
534 534  
535 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
536 536  
768 +**3. Click "Migrate-Chirpstack"**
537 537  
538 -= 8. Trouble Shooting =
770 +[[image:image-20230616162742-2.png]]
539 539  
540 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
541 541  
773 +**4. Strat Install **
542 542  
775 +
776 +Click start Install and wait until the migration succeeds
777 +
778 +[[image:image-20230616162934-3.png]]
779 +
780 +
781 +**5.Migration complete check result**
782 +
783 +[[image:image-20230616174526-4.png||height="706" width="983"]]
784 +
785 +
786 +[[image:image-20230616180004-9.png]]
787 +
788 +
789 +
790 += 9. Trouble Shooting =
791 +
792 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
793 +
794 +
543 543  [[image:image-20220920135918-1.png]]
544 544  
545 545  
... ... @@ -555,18 +555,57 @@
555 555  [[image:image-20220920141936-2.png]]
556 556  
557 557  
558 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
810 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
559 559  
560 560  
813 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
814 +
815 +[[image:image-20230508171607-1.png]]
816 +
817 +
818 +== 9.3  Fallback IP does not work, how can users check ==
819 +
820 +
821 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 +
823 +
824 +**1.Check whether the configuration is correct**
825 +
826 +Run the CMD command to ipconfig and ping 172.31.255.254.
827 +
828 +If this fails, the user needs to reconfigure.
829 +
830 +[[image:image-20230413170224-3.png||height="433" width="707"]]
831 +
832 +[[image:image-20230413170246-4.png]]
833 +
834 +
835 +**2. Check whether the firewall is disabled**
836 +
837 +If the firewall is not down, this will affect access to the gateway.
838 +
839 +
840 +== 9.4  Click "Manual_Update", why there is no response? ==
841 +
842 +
843 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
844 +
845 +
846 +[[image:image-20230527090555-3.png||height="660" width="832"]]
847 +
848 +
849 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
850 +
851 +
561 561  (((
562 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
853 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
563 563  )))
564 564  
565 565  (((
566 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
857 +With your question as detailed as possible. We will reply and help you in the shortest.
567 567  
568 568  
569 -= 10. Reference =
860 += 11. Reference =
570 570  
571 571  
572 572  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -575,7 +575,7 @@
575 575  
576 576  )))
577 577  
578 -= 11. Order Info =
869 += 12. Order Info =
579 579  
580 580  
581 581  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -583,23 +583,31 @@
583 583  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
584 584  
585 585  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
877 +
586 586  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
879 +
587 587  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
881 +
588 588  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
883 +
589 589  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 +
590 590  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
591 591  
592 592  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
593 593  
594 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
595 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
596 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
597 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
890 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
598 598  
892 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
893 +
894 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
895 +
896 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
897 +
599 599  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
600 600  
601 601  
602 -= 12. Manufacturer Info =
901 += 13. Manufacturer Info =
603 603  
604 604  
605 605  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -609,7 +609,7 @@
609 609  LongCheng Street, LongGang District ; Shenzhen 518116,China
610 610  
611 611  
612 -= 13. FCC Warning =
911 += 14. FCC Warning =
613 613  
614 614  
615 615  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0