Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 121.1 >
edited by Kilight Cao
on 2022/12/30 09:28
To version < 69.7 >
edited by Xiaoling
on 2022/07/28 17:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -13,14 +13,11 @@
13 13  {{toc/}}
14 14  
15 15  
16 += **1. Introduction** =
16 16  
18 +== **1.1 What is LPS8v2** ==
17 17  
18 18  
19 -= 1. Introduction =
20 -
21 -== 1.1 What is LPS8v2 ==
22 -
23 -
24 24  (((
25 25  (((
26 26  The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
... ... @@ -43,9 +43,10 @@
43 43  )))
44 44  
45 45  
46 -== 1.2 Specifications ==
47 47  
44 +== **1.2 Specifications** ==
48 48  
46 +
49 49  (% style="color:#037691" %)**Hardware System:**
50 50  
51 51  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -52,6 +52,8 @@
52 52  * RAM: 512MB
53 53  * eMMC: 4GB
54 54  
53 +
54 +
55 55  (% style="color:#037691" %)**Interface:**
56 56  
57 57  * 10M/100M RJ45 Ports x 1
... ... @@ -58,6 +58,8 @@
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 60  
61 +
62 +
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 63  * Work Temperature: -20 ~~ 65°C
... ... @@ -65,9 +65,12 @@
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  
68 -== 1.3 Features ==
69 69  
70 70  
72 +
73 +== **1.3 Features** ==
74 +
75 +
71 71  * Open Source Debian system
72 72  * Managed by Web GUI, SSH via WAN or WiFi
73 73  * Remote Management
... ... @@ -83,71 +83,57 @@
83 83  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
84 84  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
85 85  
91 +== **1.4 Block Diagram** ==
86 86  
87 -== 1.4 Block Diagram ==
88 88  
89 89  
95 +== **1.5 LED Indicators** ==
90 90  
91 -== 1.5 LED Indicators ==
92 92  
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 97  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
104 +(% style="color:blue" %)//**➢ LoRa LED**//(%%)//: This RGB LED will blink GREEN when the LoRaWAN module starts or transmit a packet//
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
107 +(% style="color:blue" %)//**➢ SYS LED**//(%%)//: This RGB LED will show different colors in different states~://
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
109 +// ✓ **SOLID BLUE:** The device is alive with a LoRaWAN server connection.//
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
111 +// ✓ **BLINKING BLUE:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING BLUE for several seconds and then with SOLID RED and BLINKING BLUE together//
110 110  
113 +// ✓** SOLID RED:** Device doesn't have an Internet connection.//
111 111  
112 -== 1.6 Button Intruction ==
113 113  
116 +(% style="color:blue" %)//**➢ ETH LED**//(%%)//: This LED shows the ETH interface connection status.//
114 114  
115 -LPS8-V2 has a black toggle button, which is:
116 116  
117 117  
118 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
120 += **2. Quick Start** =
119 119  
120 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121 121  
122 -
123 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
124 -
125 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126 -
127 -
128 -= 2. Quick Start =
129 -
130 -
131 131  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 133  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
134 134  
135 135  
136 -== 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -== 2.1.1 connect the network ==
129 +== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 139  
140 140  
132 +== **2.1.1 connect the network.** ==
133 +
134 +=== ===
135 +
141 141  === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
142 142  
143 143  
144 -(((
145 145  Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
146 -)))
147 147  
148 -(((
149 149  You can also use this IP to connect.
150 -)))
151 151  
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
... ... @@ -159,6 +159,25 @@
159 159  [[image:image-20220622100542-2.png||height="369" width="1256"]]
160 160  
161 161  
153 +The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
154 +
155 +
156 +
157 +(% style="color:#037691" %)**Steps to connect via fallback IP:**
158 +
159 +1. Connect PC's Ethernet port to LPS8-V2's WAN port
160 +
161 +2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
162 +
163 +[[image:image-20220622101433-4.png]]
164 +
165 +
166 +and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
167 +
168 +
169 +[[image:image-20220622102210-5.png||height="569" width="1039"]]
170 +
171 +
162 162  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
163 163  
164 164  
... ... @@ -172,32 +172,30 @@
172 172  [[image:image-20220622102847-7.png]]
173 173  
174 174  
175 -[[image:image-20220622102901-8.png||height="476" width="938"]]
185 +[[image:image-20220622102901-8.png||height="513" width="1011"]]
176 176  
177 177  
178 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
179 179  
180 -=== 2.2.1 Select your area frequency ===
189 +== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
181 181  
182 182  
183 -(((
192 +=== **2.2.1 Select your area frequency** ===
193 +
194 +
184 184  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
185 185  
186 -
187 -)))
197 +[[image:image-20220622103332-9.png]]
188 188  
189 -[[image:image-20220622103332-9.png||height="485" width="938"]]
190 190  
191 191  
192 -=== 2.2.2 Get the only gateway EUI ===
201 +=== **2.2.2 Get the only gateway EUI** ===
193 193  
194 194  
195 195  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
196 196  
206 +[[image:image-20220622103355-10.png]]
197 197  
198 -[[image:image-20220622103355-10.png||height="698" width="949"]]
199 199  
200 -
201 201  (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
202 202  
203 203  
... ... @@ -213,6 +213,7 @@
213 213  [[image:image-20220622103956-12.png]]
214 214  
215 215  
224 +
216 216  == 2.2.3 Register the gateway to The Things Network ==
217 217  
218 218  
... ... @@ -229,19 +229,20 @@
229 229  **Get it online**
230 230  
231 231  
232 -= 3. Web Configure Pages =
233 233  
234 -== 3.1 Home ==
242 += **3. Web Configure Pages** =
235 235  
236 236  
245 +== **3.1 Home** ==
246 +
247 +
237 237  //Shows the system running status~://
238 238  
239 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
240 240  
251 +== **3.2 LoRa Settings** ==
241 241  
242 -== 3.2 LoRa Settings ==
243 243  
244 -=== 3.2.1 LoRa ~-~-> LoRa ===
254 +=== **3.2.1 LoRa ~-~-> LoRa** ===
245 245  
246 246  
247 247  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
... ... @@ -248,123 +248,95 @@
248 248  
249 249  //Different LPS8v2 hardware versions can support different frequency ranges~://
250 250  
251 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
261 +* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.//
252 252  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
253 253  
254 254  (% class="wikigeneratedid" %)
255 255  //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
256 256  
257 -
258 258  (% class="wikigeneratedid" %)
259 259  [[image:image-20220616110739-1.png||height="372" width="682"]]
260 260  
261 261  
262 262  (((
263 -(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
272 +(% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/How%20to%20customized%20LoRaWAN%20frequency%20band/]]__//**
264 264  )))
265 265  
266 266  
267 -== 3.3 LoRaWAN Settings ==
268 268  
269 -=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
277 +== **3.3 LoRaWAN Settings** ==
270 270  
271 271  
272 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
280 +=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
273 273  
274 274  
283 +//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
284 +
275 275  [[image:image-20220616111932-2.png||height="516" width="672"]]
276 276  
277 277  
278 -=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
279 279  
289 +=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
280 280  
291 +
281 281  //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
282 282  
283 -
284 284  [[image:image-20220616113246-3.png||height="396" width="672"]]
285 285  
286 286  
287 -(((
288 -Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
289 -)))
297 +Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>url:http://8.211.40.43/xwiki/bin/view/Main/Use%20of%20LoRaWAN%20Basic%20Station/]]__
290 290  
291 291  
292 -== 3.4 Network Settings ==
293 293  
294 -=== 3.4.1 Network ~-~-> WiFi ===
301 +== **3.4 Network Settings** ==
295 295  
296 296  
297 -[[image:image-20220616114756-4.png||height="251" width="669"]]
304 +=== **3.4.1 Network ~-~-> WiFi** ===
298 298  
299 299  
300 -=== 3.4.2 Network ~-~-> System Status ===
307 +[[image:image-20220616114756-4.png||height="251" width="669"]]
301 301  
302 302  
303 -[[image:image-20220820134112-2.png||height="539" width="668"]]
304 304  
311 +=== **3.4.2 Network ~-~-> System Status** ===
305 305  
306 -=== 3.4.3 Network ~-~-> Firewall ===
307 307  
314 +[[image:image-20220616115229-5.png||height="548" width="665"]]
308 308  
309 -[[image:image-20220616115351-6.png||height="244" width="661"]]
310 310  
311 311  
312 -== 3.5 System ==
318 +=== **3.4.3 Network ~-~-> Firewall** ===
313 313  
314 -=== 3.5.1  System ~-~-> System Overview ===
315 315  
321 +[[image:image-20220616115351-6.png||height="244" width="661"]]
316 316  
317 -Shows the system info:
318 318  
319 -[[image:image-20220917144512-5.png||height="618" width="853"]]
320 320  
325 +== **3.5 System** ==
321 321  
322 -=== 3.5.2 System ~-~-> Backup/Restore ===
323 323  
328 +=== **3.5.1  System ~-~-> System Overview** ===
324 324  
325 -[[image:image-20220917144725-6.png||height="208" width="869"]]
326 326  
331 +Shows the system info:
327 327  
328 -=== 3.5.3 System ~-~-> Remoteit ===
329 329  
330 330  
331 -In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
335 +=== **3.5.2 System ~-~-> Backup/Restore** ===
332 332  
333 333  
334 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
338 +[[image:image-20220616115808-7.png||height="194" width="649"]]
335 335  
336 -[[image:image-20221230092303-2.png]]
337 337  
338 338  
339 -= 4. Build-in Server =
342 += **4. Build-in LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** =
340 340  
341 341  
342 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
345 +The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
343 343  
347 +You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
344 344  
345 -[[image:image-20220820115644-1.png||height="217" width="778"]]
346 346  
347 -
348 -(% style="color:red" %)**Note:**
349 -
350 - **Path**: System ~-~-> Built-in Server
351 -
352 -
353 -**Troubleshooting:**
354 -
355 -
356 -**~ 1. URL does not jump properly**
357 -
358 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
359 -
360 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
361 -
362 -
363 -== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
364 -
365 -
366 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
367 -
368 368  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
369 369  
370 370  
... ... @@ -378,189 +378,52 @@
378 378  [[image:image-20220725171719-1.png||height="570" width="769"]]
379 379  
380 380  
381 -== 4.2 Application Server ~-~- Node-Red ==
363 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
364 + You can complete the installation manually with the following command.**
382 382  
383 383  
384 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
385 -
386 -
387 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
388 -
389 -
390 -[[image:image-20220725172124-3.png||height="610" width="843"]]
391 -
392 -
393 -
394 -=== **Using Node-Red, InfluxDB and Grafana** ===
395 -
396 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
397 -
398 -
399 -the users can refer to this link to install them.
400 -
401 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
402 -
403 -
404 -= 5. How users can access LPS8v2 using serial USB =
405 -
406 -
407 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
408 -
409 -
410 -Port 1 of the UART on the LPS8v2 is GND
411 -
412 412  (% class="box infomessage" %)
413 413  (((
414 -**TXD  <~-~--> UART RXD (Gray line)**
369 +(% class="mark" %)cd /tmp && wget http:~/~/repo.dragino.com/release/tool/ttnstack/autoinstall_ttn-stack.sh
415 415  
416 -**RXD  <~-~--> UART TXD (White line)**
417 -
418 -**GND <~-~--> GND (Black line)**
371 +(% style="background-color:#fcf8e3" %)chmod +x /tmp/autoinstall_ttn-stack.sh && /tmp/autoinstall_ttn-stack.sh ttn-stack
419 419  )))
420 420  
421 421  
422 -**LPS8v2 UART connection photo**
423 423  
424 -[[image:image-20220804163015-1.png||height="621" width="466"]]
376 += **5. Build-in Application Server ~-~- Node-Red** =
425 425  
426 426  
379 +The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red.**
427 427  
428 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
381 +You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
429 429  
430 430  
431 -[[image:image-20220804164928-3.png||height="320" width="332"]]
384 +Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or [[http:~~/~~/<Local-IPV4-Address~>>>http://<Local-IPV4-Address>]]//**__
432 432  
433 433  
434 -[[image:image-20220804164747-2.png||height="622" width="594"]]
387 +[[image:image-20220725172124-3.png||height="610" width="843"]]
435 435  
436 436  
437 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
390 +(% style="color:red" %)**Note:  A portion of the sample devices that were not installed with Node-Red.
391 + You can complete the installation manually with the following command.**
438 438  
439 439  
440 -== **Step 1: Configure Frequency Band** ==
441 441  
442 -
443 -//Each country has a requirement for frequency region. Choose the right one for your area.//
444 -
445 -[[image:image-20220905164308-1.png]]
446 -
447 -
448 -
449 -== **Step 2: Configure the forward address** ==
450 -
451 -
452 -**Select one of the servers to configure.**
453 -
454 -**For example:**
455 -
456 -[[image:image-20220905164847-2.png]]
457 -
458 -
459 -
460 -== **Step 3: Download and Install the Helium-gateway-rs** ==
461 -
462 -
463 -**Access the gateway CLI via SSH.**
464 -
465 -[[image:image-20220905165222-3.png]]
466 -
467 -
468 -**Download gateway-rs.**
469 -
470 -[[image:image-20220905165715-5.png]]
471 -
472 472  (% class="box infomessage" %)
473 473  (((
474 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
397 +(% class="mark" %)cd /tmp && wget  http:~/~/repo.dragino.com/release/tool/nodered/autoinstall_nodered.sh
398 +chmod +x /tmp/autoinstall_nodered.sh && /tmp/autoinstall_nodered.sh node-red
475 475  )))
476 476  
401 +[[image:image-20220728102000-1.png]]
477 477  
478 -**Install gateway-rs.**
479 479  
480 -[[image:image-20220905165917-7.png]]
481 481  
482 -(% class="box infomessage" %)
483 -(((
484 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
485 -)))
405 +(% style="color:inherit; font-family:inherit; font-size:29px" %)**10. Supports**
486 486  
487 487  
488 -**Modify configuration.**
489 -
490 -
491 -[[image:image-20220905173847-12.png]]
492 -
493 -
494 -(% class="box infomessage" %)
495 495  (((
496 -**region=<Enter regional parameters> \
497 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
498 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
499 -)))
500 -
501 -
502 -**Restart the helium_gateway**
503 -
504 -[[image:image-20220905170920-9.png]]
505 -
506 -
507 -(% class="box infomessage" %)
508 -(((
509 -**systemctl restart helium_gateway**
510 -)))
511 -
512 -
513 -**Check the helium_gateway Log：**
514 -
515 -[[image:image-20220905173952-13.png]]
516 -
517 -
518 -(% class="box infomessage" %)
519 -(((
520 -**journalctl -u helium_gateway -f**
521 -)))
522 -
523 -
524 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
525 -
526 -where the helium gateway log is shown:
527 -
528 -[[image:image-20220905174534-14.png]]
529 -
530 -
531 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
532 -
533 -
534 -= 7. OTA System Update =
535 -
536 -
537 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
538 -
539 -
540 -= 8. Trouble Shooting =
541 -
542 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
543 -
544 -
545 -[[image:image-20220920135918-1.png]]
546 -
547 -
548 -This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
549 -
550 -By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
551 -
552 -
553 -So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
554 -
555 -**Click the update URL button to configure the URL with the current eth port address.**
556 -
557 -[[image:image-20220920141936-2.png]]
558 -
559 -
560 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
561 -
562 -
563 -(((
564 564  **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
565 565  )))
566 566  
... ... @@ -568,16 +568,16 @@
568 568  **//With your question as detailed as possible. We will reply and help you in the shortest.//**
569 569  
570 570  
571 -= 10. Reference =
572 572  
417 += **11 Reference** =
573 573  
419 +
574 574  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
575 -* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
576 576  
577 577  
578 578  )))
579 579  
580 -= 11. Order Info =
425 += **12. Order Info** =
581 581  
582 582  
583 583  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -591,6 +591,7 @@
591 591  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
592 592  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
593 593  
439 +
594 594  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
595 595  
596 596  * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
... ... @@ -601,9 +601,10 @@
601 601  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
602 602  
603 603  
604 -= 12. Manufacturer Info =
605 605  
451 += **13. Manufacturer Info** =
606 606  
453 +
607 607  **Shenzhen Dragino Technology Development co. LTD**
608 608  
609 609  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -611,38 +611,23 @@
611 611  LongCheng Street, LongGang District ; Shenzhen 518116,China
612 612  
613 613  
614 -= 13. FCC Warning =
615 615  
462 += **14. FCC Warning** =
616 616  
617 -(((
464 +
618 618  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
619 -)))
620 620  
621 -(((
622 622  ~-~- Reorient or relocate the receiving antenna.
623 -)))
624 624  
625 -(((
626 626  ~-~- Increase the separation between the equipment and receiver.
627 -)))
628 628  
629 -(((
630 630  ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
631 -)))
632 632  
633 -(((
634 634  ~-~- Consult the dealer or an experienced radio/TV technician for help.
635 -)))
636 636  
637 637  
638 -(((
639 639  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
640 -)))
641 641  
642 642  
643 -(((
644 644  The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
645 -
646 -
647 647  )))
648 -)))
image-20220804163015-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20220804164747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20220804164928-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -28.2 KB
Content
image-20220820115644-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
image-20220820134112-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
image-20220905164308-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -49.5 KB
Content
image-20220905164847-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -58.9 KB
Content
image-20220905165222-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -18.8 KB
Content
image-20220905165648-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.6 KB
Content
image-20220905165715-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
image-20220905165847-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20220905165917-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -15.4 KB
Content
image-20220905170800-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905170920-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content
image-20220905173045-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220905173154-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220905173847-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -25.0 KB
Content
image-20220905173952-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20220905174534-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -94.4 KB
Content
image-20220917135916-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.8 KB
Content
image-20220917141209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141336-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -271.9 KB
Content
image-20220917141436-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144512-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -140.9 KB
Content
image-20220917144725-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0