Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 119.1 >
edited by Kilight Cao
on 2022/12/30 09:23
To version < 223.1 >
edited by Kilight Cao
on 2023/06/16 17:56
>
Change comment: Uploaded new attachment "image-20230616175617-8.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -23,15 +23,15 @@
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -57,11 +57,13 @@
57 57  * 10M/100M RJ45 Ports x 1
58 58  * Multi-Channel LoRaWAN Wireless
59 59  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
60 60  
61 61  (% style="color:#037691" %)**Operating Condition:**
62 62  
63 -* Work Temperature: -20 ~~ 65°C
64 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
65 65  * Power Input: 5V, 2A, DC
66 66  
67 67  
... ... @@ -81,37 +81,33 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 87  
88 88  
89 -== 1.4 Block Diagram ==
91 +== 1.4 LED Indicators ==
90 90  
91 91  
92 -
93 -== 1.5 LED Indicators ==
94 -
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
97 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
99 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
101 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
108 108  
109 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
109 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
112 112  
113 113  
114 -== 1.6 Button Intruction ==
112 +== 1.5 Button Intruction ==
115 115  
116 116  
117 117  LPS8-V2 has a black toggle button, which is:
... ... @@ -119,12 +119,12 @@
119 119  
120 120  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121 121  
122 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
123 123  
124 124  
125 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
123 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
126 126  
127 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
125 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
128 128  
129 129  
130 130  = 2. Quick Start =
... ... @@ -137,14 +137,29 @@
137 137  
138 138  == 2.1 Connects to the network and accesses the gateway Web UI ==
139 139  
140 -== 2.1.1 connect the network ==
138 +=== 2.1.1 connect the network ===
141 141  
142 142  
143 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
144 144  
145 145  
144 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
145 +
146 +(% style="background-color:yellow" %)**dragino+dragino**
147 +
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +
155 +
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 +
158 +
146 146  (((
147 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
160 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
148 148  )))
149 149  
150 150  (((
... ... @@ -155,9 +155,40 @@
155 155  
156 156  
157 157  
158 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
171 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
159 159  
160 160  
174 +[[image:image-20230107084650-2.png||height="310" width="839"]]
175 +
176 +
177 +(% style="color:blue" %)**Steps to connect via fallback IP:**
178 +
179 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
180 +
181 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
182 +
183 +
184 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
185 +
186 +
187 +As in the below photo:
188 +
189 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
190 +
191 +
192 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
193 +
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
195 +
196 +
197 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
198 +
199 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
200 +
201 +
202 +
203 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 +
161 161  [[image:image-20220622100542-2.png||height="369" width="1256"]]
162 162  
163 163  
... ... @@ -177,11 +177,106 @@
177 177  [[image:image-20220622102901-8.png||height="476" width="938"]]
178 178  
179 179  
180 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
224 +=== 2.1.2 Access Configure Web UI ===
181 181  
182 -=== 2.2.1 Select your area frequency ===
183 183  
227 +**Web Interface**
184 184  
229 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
230 +
231 +
232 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
233 +
234 +You will see the login interface of LPS8-V2 as shown below.
235 +
236 +The account details for Web Login are:
237 +
238 +(% style="color:blue" %)**User Name: root**
239 +
240 +(% style="color:blue" %)**Password:   dragino**
241 +
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
243 +
244 +
245 +== 2.2  Typical Network Setup ==
246 +
247 +=== 2.2.1  Overview ===
248 +
249 +
250 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 +
252 +* **WAN Port Internet Mode**
253 +
254 +* **WiFi Client Mode**
255 +
256 +* **Cellular Mode**
257 +
258 +
259 +
260 +=== 2.2.2  Use WAN port to access Internet ===
261 +
262 +
263 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
264 +
265 +
266 +[[image:image-20230411100633-2.png||height="501" width="935"]]
267 +
268 +
269 +=== 2.2.3  Access the Internet as a WiFi Client ===
270 +
271 +
272 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
273 +
274 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
275 +
276 +[[image:image-20230411095739-1.png||height="264" width="691"]]
277 +
278 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
279 +
280 +
281 +=== 2.2.4  Use built-in 4G modem for internet access ===
282 +
283 +
284 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
285 +
286 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
287 +
288 +
289 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
290 +
291 +First, install the Micro SIM card as below direction
292 +
293 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
294 +
295 +
296 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
297 +
298 +
299 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
300 +
301 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
302 +
303 +
304 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
305 +
306 +
307 +=== 2.2.5  Check Internet connection ===
308 +
309 +
310 +In the **home** page, we can check the Internet connection.
311 +
312 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
313 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
314 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
315 +
316 +[[image:image-20230411101534-3.png||height="544" width="942"]]
317 +
318 +
319 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
320 +
321 +=== 2.3.1 Select your area frequency ===
322 +
323 +
185 185  (((
186 186  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
187 187  
... ... @@ -191,7 +191,7 @@
191 191  [[image:image-20220622103332-9.png||height="485" width="938"]]
192 192  
193 193  
194 -=== 2.2.2 Get the only gateway EUI ===
333 +=== 2.3.2 Get the only gateway EUI ===
195 195  
196 196  
197 197  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
... ... @@ -215,7 +215,7 @@
215 215  [[image:image-20220622103956-12.png]]
216 216  
217 217  
218 -== 2.2.3 Register the gateway to The Things Network ==
357 +=== 2.3.3 Register the gateway to The Things Network ===
219 219  
220 220  
221 221  **Login to The Things Network**
... ... @@ -236,7 +236,7 @@
236 236  == 3.1 Home ==
237 237  
238 238  
239 -//Shows the system running status~://
378 +Shows the system running status:
240 240  
241 241  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
242 242  
... ... @@ -246,15 +246,15 @@
246 246  === 3.2.1 LoRa ~-~-> LoRa ===
247 247  
248 248  
249 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
250 250  
251 -//Different LPS8v2 hardware versions can support different frequency ranges~://
390 +Different LPS8v2 hardware versions can support different frequency ranges:
252 252  
253 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
254 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
392 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
393 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
255 255  
256 256  (% class="wikigeneratedid" %)
257 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
258 258  
259 259  
260 260  (% class="wikigeneratedid" %)
... ... @@ -271,7 +271,7 @@
271 271  === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
272 272  
273 273  
274 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
413 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
275 275  
276 276  
277 277  [[image:image-20220616111932-2.png||height="516" width="672"]]
... ... @@ -280,7 +280,7 @@
280 280  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
281 281  
282 282  
283 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
422 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
284 284  
285 285  
286 286  [[image:image-20220616113246-3.png||height="396" width="672"]]
... ... @@ -305,15 +305,32 @@
305 305  [[image:image-20220820134112-2.png||height="539" width="668"]]
306 306  
307 307  
308 -=== 3.4.3 Network ~-~-> Firewall ===
447 +=== 3.4.3 Network ~-~-> Network ===
309 309  
310 310  
311 -[[image:image-20220616115351-6.png||height="244" width="661"]]
450 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
312 312  
452 +[[image:image-20230214093657-2.png||height="333" width="858"]]
313 313  
454 +
455 +=== 3.4.4 Network ~-~-> Cellular ===
456 +
457 +
458 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
459 +
460 +(% style="color:red" %)**Note: APN cannot be empty.**
461 +
462 +[[image:image-20230228115126-1.png]]
463 +
464 +
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
466 +
467 +[[image:image-20230228115535-2.png||height="478" width="888"]]
468 +
469 +
314 314  == 3.5 System ==
315 315  
316 -=== 3.5.1  System ~-~-> System Overview ===
472 +=== 3.5.1 System ~-~-> System Overview ===
317 317  
318 318  
319 319  Shows the system info:
... ... @@ -321,12 +321,41 @@
321 321  [[image:image-20220917144512-5.png||height="618" width="853"]]
322 322  
323 323  
324 -=== 3.5.2 System ~-~-> Backup/Restore ===
480 +=== 3.5.2 System ~-~-> System General ===
325 325  
326 326  
483 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
484 +
485 +In addition, Users can customize the FallBack IP address.
486 +
487 +[[image:image-20230214094058-3.png]]
488 +
489 +
490 +=== 3.5.3 System ~-~-> Backup/Restore ===
491 +
492 +
327 327  [[image:image-20220917144725-6.png||height="208" width="869"]]
328 328  
329 329  
496 +=== 3.5.4 System ~-~-> Remoteit ===
497 +
498 +
499 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
500 +
501 +
502 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
503 +
504 +[[image:image-20221230092303-2.png]]
505 +
506 +
507 +=== 3.5.5 System ~-~-> Package Management ===
508 +
509 +
510 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
511 +
512 +[[image:image-20230214094316-4.png]]
513 +
514 +
330 330  = 4. Build-in Server =
331 331  
332 332  
... ... @@ -333,7 +333,7 @@
333 333  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
334 334  
335 335  
336 -[[image:image-20220820115644-1.png||height="217" width="778"]]
521 +[[image:image-20230214095318-5.png||height="347" width="980"]]
337 337  
338 338  
339 339  (% style="color:red" %)**Note:**
... ... @@ -369,6 +369,16 @@
369 369  [[image:image-20220725171719-1.png||height="570" width="769"]]
370 370  
371 371  
557 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
558 +
559 +
560 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
561 +
562 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
563 +
564 +[[image:image-20230321092456-1.png]]
565 +
566 +
372 372  == 4.2 Application Server ~-~- Node-Red ==
373 373  
374 374  
... ... @@ -392,16 +392,94 @@
392 392  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393 393  
394 394  
395 -= 5. How users can access LPS8v2 using serial USB =
590 +=== **Upgrade the node.js** ===
396 396  
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
397 397  
398 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
399 399  
595 +the users can refer to this link to upgrade them.
400 400  
401 -Port 1 of the UART on the LPS8v2 is GND
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
402 402  
599 +
600 +== 4.3 How to disable the built-in server ==
601 +
602 +
603 +Use the following commands to start and stop the TTNv3 service:
604 +
403 403  (% class="box infomessage" %)
404 404  (((
607 +**# start**
608 +systemctl start ttnstack
609 +
610 +**# stop**
611 +systemctl stop ttnstack
612 +
613 +**# enable**
614 +systemctl enable ttnstack
615 +
616 +**#disable**
617 +systemctl disable ttnstack
618 +)))
619 +
620 +Use the following commands to start and stop the Node-Red service:
621 +
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
626 +
627 +**# stop**
628 +systemctl stop nodered
629 +
630 +**# enable**
631 +systemctl enable nodered
632 +
633 +**#disable**
634 +systemctl disable nodered
635 +)))
636 +
637 +
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
639 +
640 +
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
642 +
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
644 +
645 +
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
647 +
648 +
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
650 +
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
652 +
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
654 +
655 +
656 +When the configuration is complete, click** "Save&Apply"**.
657 +
658 +
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 +
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
662 +
663 +
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
665 +
666 +
667 +
668 += 6. How users can access LPS8-V2 using serial USB =
669 +
670 +
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
672 +
673 +
674 +Port 1 of the UART on the LPS8-V2 is GND
675 +
676 +(% class="box infomessage" %)
677 +(((
405 405  **TXD  <~-~--> UART RXD (Gray line)**
406 406  
407 407  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -412,10 +412,9 @@
412 412  
413 413  **LPS8v2 UART connection photo**
414 414  
415 -[[image:image-20220804163015-1.png||height="621" width="466"]]
416 416  
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
417 417  
418 -
419 419  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
420 420  
421 421  
... ... @@ -425,7 +425,7 @@
425 425  [[image:image-20220804164747-2.png||height="622" width="594"]]
426 426  
427 427  
428 -= 6. Use the helium gateway-rs as the Data-only Hotspot =
700 += 7. Use the helium gateway-rs as the Data-only Hotspot =
429 429  
430 430  
431 431  == **Step 1: Configure Frequency Band** ==
... ... @@ -453,59 +453,72 @@
453 453  
454 454  **Access the gateway CLI via SSH.**
455 455  
456 -[[image:image-20220905165222-3.png]]
728 +[[image:image-20230425153417-2.png]]
457 457  
458 458  
459 -**Download gateway-rs.**
731 +**Install the new gateway-rs**
460 460  
461 -[[image:image-20220905165715-5.png]]
462 -
463 463  (% class="box infomessage" %)
464 464  (((
465 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
735 +**apt update && apt install helium-gateway**
466 466  )))
467 467  
738 +[[image:image-20230425154058-4.png]]
468 468  
469 -**Install gateway-rs.**
470 470  
471 -[[image:image-20220905165917-7.png]]
472 472  
742 +Option: If you installed the older gateway-rs, you have clean it
743 +
473 473  (% class="box infomessage" %)
474 474  (((
475 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
746 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
476 476  )))
477 477  
749 +[[image:image-20230425153823-3.png]]
478 478  
479 -**Modify configuration.**
480 480  
752 +**Change the region setting:**
481 481  
482 -[[image:image-20220905173847-12.png]]
483 483  
755 +(% class="box infomessage" %)
756 +(((
757 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
484 484  
759 +
760 +**e.g: **
761 +
762 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
763 +
764 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
765 +)))
766 +
767 +
768 +**Restart the gateway-rs**
769 +
485 485  (% class="box infomessage" %)
486 486  (((
487 -**region=<Enter regional parameters> \
488 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
489 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
772 +**systemctl restart helium_gateway**
490 490  )))
491 491  
775 +[[image:image-20230425155612-7.png||height="265" width="911"]]
492 492  
493 -**Restart the helium_gateway**
494 494  
495 -[[image:image-20220905170920-9.png]]
496 496  
779 +**Check the helium_gateway running status**
497 497  
781 +
498 498  (% class="box infomessage" %)
499 499  (((
500 -**systemctl restart helium_gateway**
784 +**systemctl status helium_gateway**
501 501  )))
502 502  
503 503  
504 -**Check the helium_gateway Log：**
788 +[[image:image-20230425154740-5.png]]
505 505  
506 -[[image:image-20220905173952-13.png]]
507 507  
508 508  
792 +**Check the helium_gateway Log：**
793 +
509 509  (% class="box infomessage" %)
510 510  (((
511 511  **journalctl -u helium_gateway -f**
... ... @@ -512,27 +512,94 @@
512 512  )))
513 513  
514 514  
515 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
800 +[[image:image-20230425155659-8.png]]
516 516  
517 -where the helium gateway log is shown:
518 518  
519 -[[image:image-20220905174534-14.png]]
803 += 8. OTA System Update =
520 520  
521 521  
522 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
806 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
523 523  
524 524  
525 -= 7. OTA System Update =
809 +== 8.1 Auto-update method ==
526 526  
527 527  
528 -LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
812 +The default, each gateway will enable the auto-update function.
529 529  
814 +this function will be triggered every boot and every midnight.
530 530  
531 -= 8. Trouble Shooting =
532 532  
533 -== 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
817 +Users can enable/disable it via Web Page
534 534  
819 +[[image:image-20230607094447-2.png]]
535 535  
821 +
822 +== 8.2 Manual upgrade method ==
823 +
824 +
825 +1). Using the Linux command to upgrade the system
826 +
827 +
828 +(% class="box infomessage" %)
829 +(((
830 +**apt update && apt install *dragino***
831 +)))
832 +
833 +
834 +2). Upgrade the system via the Web page button of "Manual Update"
835 +
836 +
837 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
838 +
839 +[[image:image-20230607093849-1.png]]
840 +
841 +
842 += 9. FAQ =
843 +
844 +== 9.1 How to change Hostname ==
845 +
846 +
847 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
848 +
849 +(% class="box infomessage" %)
850 +(((
851 +hostnamectl set-hostname dragino-123456
852 +)))
853 +
854 +[[image:image-20230517102429-1.png]]
855 +
856 +After the configuration is complete, run "reboot" to restart the gateway.
857 +
858 +
859 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
860 +
861 +
862 +Migrate guide:
863 +
864 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
865 +
866 +2. Download migrate script and run it.
867 +
868 +(% class="box infomessage" %)
869 +(((
870 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
871 +)))
872 +
873 +[[image:image-20230602135658-1.png||height="545" width="986"]]
874 +
875 +
876 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
877 +
878 +[[image:image-20230602135825-2.png||height="356" width="855"]]
879 +
880 +The default account for chirpstack is: **admin/admin**
881 +
882 +
883 += 10. Trouble Shooting =
884 +
885 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
886 +
887 +
536 536  [[image:image-20220920135918-1.png]]
537 537  
538 538  
... ... @@ -548,18 +548,57 @@
548 548  [[image:image-20220920141936-2.png]]
549 549  
550 550  
551 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
903 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
552 552  
553 553  
906 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
907 +
908 +[[image:image-20230508171607-1.png]]
909 +
910 +
911 +== 10.3  Fallback IP does not work, how can users check ==
912 +
913 +
914 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
915 +
916 +
917 +**1.Check whether the configuration is correct**
918 +
919 +Run the CMD command to ipconfig and ping 172.31.255.254.
920 +
921 +If this fails, the user needs to reconfigure.
922 +
923 +[[image:image-20230413170224-3.png||height="433" width="707"]]
924 +
925 +[[image:image-20230413170246-4.png]]
926 +
927 +
928 +**2. Check whether the firewall is disabled**
929 +
930 +If the firewall is not down, this will affect access to the gateway.
931 +
932 +
933 +== 10.4  Click "Manual_Update", why there is no response? ==
934 +
935 +
936 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
937 +
938 +
939 +[[image:image-20230527090555-3.png||height="660" width="832"]]
940 +
941 +
942 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
943 +
944 +
554 554  (((
555 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
946 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
556 556  )))
557 557  
558 558  (((
559 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
950 +With your question as detailed as possible. We will reply and help you in the shortest.
560 560  
561 561  
562 -= 10. Reference =
953 += 12. Reference =
563 563  
564 564  
565 565  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -569,7 +569,7 @@
569 569  
570 570  )))
571 571  
572 -= 11. Order Info =
963 += 13. Order Info =
573 573  
574 574  
575 575  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -577,23 +577,31 @@
577 577  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
578 578  
579 579  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
971 +
580 580  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
973 +
581 581  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
975 +
582 582  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
977 +
583 583  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
979 +
584 584  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
585 585  
586 586  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
587 587  
588 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
589 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
590 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
591 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
984 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
592 592  
986 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
987 +
988 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
989 +
990 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
991 +
593 593  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
594 594  
595 595  
596 -= 12. Manufacturer Info =
995 += 14. Manufacturer Info =
597 597  
598 598  
599 599  **Shenzhen Dragino Technology Development co. LTD**
... ... @@ -603,7 +603,7 @@
603 603  LongCheng Street, LongGang District ; Shenzhen 518116,China
604 604  
605 605  
606 -= 13. FCC Warning =
1005 += 15. FCC Warning =
607 607  
608 608  
609 609  (((
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0