Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 116.1 >
edited by Xiaoye
on 2022/11/21 11:30
To version < 283.1 >
edited by Kilight Cao
on 2023/12/04 11:38
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -16,23 +16,22 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  )))
29 29  
30 30  (((
31 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  )))
33 33  
34 34  (((
35 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,14 +40,13 @@
40 40  )))
41 41  
42 42  (((
43 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -59,14 +59,16 @@
59 59  * 10M/100M RJ45 Ports x 1
60 60  * Multi-Channel LoRaWAN Wireless
61 61  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 -== **1.3 Features** ==
69 +== 1.3 Features ==
70 70  
71 71  
72 72  * Open Source Debian system
... ... @@ -81,72 +81,84 @@
81 81  ** Semtech UDP Packet Forwarder
82 82  ** LoRaWAN Basic Station
83 83  ** ChirpStack-Gateway-Bridge (MQTT)
84 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**ChirpStack**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
86 86  
87 -== **1.4 Block Diagram** ==
87 +== 1.4 LED Indicators ==
88 88  
89 89  
90 -
91 -== **1.5 LED Indicators** ==
92 -
93 -
94 94  LPS8-V2 has totally four LEDs, They are:
95 95  
96 96  
97 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
98 98  
99 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
100 100  
101 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
102 102  
103 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
104 104  
105 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
106 106  
107 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
108 108  
109 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
110 110  
111 111  
108 +== 1.5 Button Intruction ==
112 112  
113 -== **1.6 Button Intruction** ==
114 114  
115 -
116 116  LPS8-V2 has a black toggle button, which is:
117 117  
118 118  
119 119  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
120 120  
121 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
122 122  
123 123  
124 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
125 125  
126 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
127 127  
128 128  
124 +(% style="color:red" %)**Note: Restoring factory Settings does not erase data from the LPS8-V2 built-in server**
129 129  
130 -= **2. Quick Start** =
126 +See this link for steps on how to clear data from the built-in server: **[[How to reset the built-in server>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.6A0Howtoresetthebuilt-inserver]]**
131 131  
132 132  
129 += 2. Quick Start =
130 +
131 +
133 133  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
134 134  
135 135  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
136 136  
137 137  
137 +== 2.1 Access and Configure LPS8-V2 ==
138 138  
139 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
139 +=== 2.1.1 Find IP address of LPS8-V2 ===
140 140  
141 141  
142 -== **2.1.1 connect the network.** ==
142 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
143 143  
144 144  
145 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
145 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
146 146  
147 +(% style="background-color:yellow" %)**dragino+dragino**
147 147  
149 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
150 +
151 +[[image:image-20230527084515-1.png]]
152 +
153 +[[image:image-20230527085250-2.png||height="495" width="284"]]
154 +
155 +
156 +
157 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
158 +
159 +
148 148  (((
149 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
161 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
150 150  )))
151 151  
152 152  (((
... ... @@ -157,9 +157,40 @@
157 157  
158 158  
159 159  
160 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
172 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
161 161  
162 162  
175 +[[image:image-20230107084650-2.png||height="310" width="839"]]
176 +
177 +
178 +(% style="color:blue" %)**Steps to connect via fallback IP:**
179 +
180 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
181 +
182 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
183 +
184 +
185 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
186 +
187 +
188 +As in the below photo:
189 +
190 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
191 +
192 +
193 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
194 +
195 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.3A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
196 +
197 +
198 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
199 +
200 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
201 +
202 +
203 +
204 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
205 +
163 163  [[image:image-20220622100542-2.png||height="369" width="1256"]]
164 164  
165 165  
... ... @@ -179,13 +179,104 @@
179 179  [[image:image-20220622102901-8.png||height="476" width="938"]]
180 180  
181 181  
225 +=== 2.1.2 Access Configure Web UI ===
182 182  
183 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
184 184  
228 +**Web Interface**
185 185  
186 -=== **2.2.1 Select your area frequency** ===
230 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
187 187  
188 188  
233 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
234 +
235 +You will see the login interface of LPS8-V2 as shown below.
236 +
237 +The account details for Web Login are:
238 +
239 +(% style="color:blue" %)**User Name: root**
240 +
241 +(% style="color:blue" %)**Password:   dragino**
242 +
243 +[[image:image-20230106153501-1.png||height="367" width="894"]]
244 +
245 +
246 +== 2.2  Typical Network Setup ==
247 +
248 +=== 2.2.1  Overview ===
249 +
250 +
251 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
252 +
253 +* **WAN Port Internet Mode**
254 +
255 +* **WiFi Client Mode**
256 +
257 +* **Cellular Mode**
258 +
259 +=== 2.2.2  Use WAN port to access Internet ===
260 +
261 +
262 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
263 +
264 +
265 +[[image:image-20230411100633-2.png||height="501" width="935"]]
266 +
267 +
268 +=== 2.2.3  Access the Internet as a WiFi Client ===
269 +
270 +
271 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
272 +
273 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
274 +
275 +[[image:image-20230411095739-1.png||height="264" width="691"]]
276 +
277 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
278 +
279 +
280 +=== 2.2.4  Use built-in 4G modem for internet access ===
281 +
282 +
283 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
284 +
285 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
286 +
287 +
288 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
289 +
290 +First, install the Micro SIM card as below direction
291 +
292 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
293 +
294 +
295 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
296 +
297 +
298 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
299 +
300 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
301 +
302 +
303 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
304 +
305 +
306 +=== 2.2.5  Check Internet connection ===
307 +
308 +
309 +In the **home** page, we can check the Internet connection.
310 +
311 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
312 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
313 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
314 +
315 +[[image:image-20230411101534-3.png||height="544" width="942"]]
316 +
317 +
318 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
319 +
320 +=== 2.3.1 Select your area frequency ===
321 +
322 +
189 189  (((
190 190  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
191 191  
... ... @@ -195,10 +195,9 @@
195 195  [[image:image-20220622103332-9.png||height="485" width="938"]]
196 196  
197 197  
332 +=== 2.3.2 Get the only gateway EUI ===
198 198  
199 -=== **2.2.2 Get the only gateway EUI** ===
200 200  
201 -
202 202  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
203 203  
204 204  
... ... @@ -220,10 +220,9 @@
220 220  [[image:image-20220622103956-12.png]]
221 221  
222 222  
356 +=== 2.3.3 Register the gateway to The Things Network ===
223 223  
224 -== **2.2.3 Register the gateway to The Things Network** ==
225 225  
226 -
227 227  **Login to The Things Network**
228 228  
229 229  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -237,34 +237,30 @@
237 237  **Get it online**
238 238  
239 239  
372 += 3. Web Configure Pages =
240 240  
241 -= **3. Web Configure Pages** =
374 +== 3.1 Home ==
242 242  
243 243  
244 -== **3.1 Home** ==
377 +Shows the system running status:
245 245  
246 -
247 -//Shows the system running status~://
248 -
249 249  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
250 250  
251 251  
382 +== 3.2 LoRa Settings ==
252 252  
253 -== **3.2 LoRa Settings** ==
384 +=== 3.2.1 LoRa ~-~-> LoRa ===
254 254  
255 255  
256 -=== **3.2.1 LoRa ~-~-> LoRa** ===
387 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
257 257  
389 +Different LPS8v2 hardware versions can support different frequency ranges:
258 258  
259 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
391 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
392 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
260 260  
261 -//Different LPS8v2 hardware versions can support different frequency ranges~://
262 -
263 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
264 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
265 -
266 266  (% class="wikigeneratedid" %)
267 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
395 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
268 268  
269 269  
270 270  (% class="wikigeneratedid" %)
... ... @@ -276,26 +276,23 @@
276 276  )))
277 277  
278 278  
407 +== 3.3 LoRaWAN Settings ==
279 279  
280 -== **3.3 LoRaWAN Settings** ==
409 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
281 281  
282 282  
283 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
412 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
284 284  
285 285  
286 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287 -
288 -
289 289  [[image:image-20220616111932-2.png||height="516" width="672"]]
290 290  
291 291  
418 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
292 292  
293 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
294 294  
421 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
295 295  
296 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
297 297  
298 -
299 299  [[image:image-20220616113246-3.png||height="396" width="672"]]
300 300  
301 301  
... ... @@ -304,253 +304,441 @@
304 304  )))
305 305  
306 306  
432 +== 3.4 Network Settings ==
307 307  
308 -== **3.4 Network Settings** ==
434 +=== 3.4.1 Network ~-~-> WiFi ===
309 309  
436 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
310 310  
311 -=== **3.4.1 Network ~-~-> WiFi** ===
438 +[[image:image-20230619095946-1.png||height="332" width="827"]]
312 312  
313 313  
314 -[[image:image-20220616114756-4.png||height="251" width="669"]]
441 +=== 3.4.2 Network ~-~-> System Status ===
315 315  
316 316  
444 +[[image:image-20220820134112-2.png||height="539" width="668"]]
317 317  
318 -=== **3.4.2 Network ~-~-> System Status** ===
319 319  
447 +=== 3.4.3 Network ~-~-> Network ===
320 320  
321 -[[image:image-20220820134112-2.png||height="539" width="668"]]
322 322  
450 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
323 323  
452 +[[image:image-20230214093657-2.png||height="333" width="858"]]
324 324  
325 -=== **3.4.3 Network ~-~-> Firewall** ===
326 326  
455 +=== 3.4.4 Network ~-~-> Cellular ===
327 327  
328 -[[image:image-20220616115351-6.png||height="244" width="661"]]
329 329  
458 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
330 330  
460 +(% style="color:red" %)**Note: APN cannot be empty.**
331 331  
332 -== **3.5 System** ==
462 +[[image:image-20230228115126-1.png]]
333 333  
334 334  
335 -=== **3.5.1  System ~-~-> System Overview** ===
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
336 336  
467 +[[image:image-20230228115535-2.png||height="478" width="888"]]
337 337  
469 +
470 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
471 +
472 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
473 +
474 +
475 +== 3.5 System ==
476 +
477 +=== 3.5.1 System ~-~-> System Overview ===
478 +
479 +
338 338  Shows the system info:
339 339  
340 -[[image:image-20220917144512-5.png||height="618" width="853"]]
482 +[[image:image-20231031162854-1.png]]
341 341  
342 342  
485 +=== 3.5.2 System ~-~-> System General ===
343 343  
344 -=== **3.5.2 System ~-~-> Backup/Restore** ===
345 345  
488 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
346 346  
347 -[[image:image-20220917144725-6.png||height="208" width="869"]]
490 +In addition, Users can customize the FallBack IP address.
348 348  
492 +[[image:image-20230214094058-3.png]]
349 349  
350 350  
351 -= **4. Build-in Server** =
495 +=== 3.5.3 System ~-~-> Backup/Restore ===
352 352  
353 353  
354 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
498 +[[image:image-20231031162927-2.png]]
355 355  
356 356  
357 -[[image:image-20220820115644-1.png||height="217" width="778"]]
501 +=== 3.5.4 System ~-~-> Remoteit ===
358 358  
359 359  
360 -(% style="color:red" %)**Note:**
504 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
361 361  
362 - **Path**: System ~-~-> Built-in Server
363 363  
507 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
364 364  
365 -**Troubleshooting:**
509 +[[image:image-20221230092303-2.png]]
366 366  
367 367  
368 -**~ 1. URL does not jump properly**
512 +=== 3.5.5 System ~-~-> Package Management ===
369 369  
370 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
371 371  
372 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
515 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
373 373  
517 +[[image:image-20230214094316-4.png]]
374 374  
375 375  
376 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
520 += 4. Build-in Server =
377 377  
522 +After the v1.7-230606 version, the LPS8-V2 default factory pre-installed the LoRaWAN Server: (% style="color:blue" %)**ChirpStack-V4**(%%), Application Server: (% style="color:blue" %)**Node-Red**(%%).
378 378  
379 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
380 380  
381 -Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
525 +== 1). LoRaWAN Network Server: (% style="color:blue" %)**ChirpStack-V4**(%%) ==
382 382  
527 +[[image:image-20231106180816-4.png||height="416" width="896"]]
383 383  
384 -Login account:
529 +[[image:image-20231201165904-1.png||height="466" width="899"]]
385 385  
386 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
531 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)ChirpStack-V4 (% style="color:red" %)via click the 'Launch' button, and the login account: admin/admin(%%)**
387 387  
388 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
533 +For more information on server operations see [[Register LPSV2 to the built-in Chirpstack>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
389 389  
390 390  
391 -[[image:image-20220725171719-1.png||height="570" width="769"]]
392 392  
537 +== 2). Application Network Server: (% style="color:blue" %)**Node-Red**(%%) ==
393 393  
394 394  
395 -== **4.2 Application Server ~-~- Node-Red** ==
540 +[[image:image-20230616175558-7.png||height="362" width="894"]]
396 396  
542 +[[image:image-20231201170355-2.png||height="536" width="899"]]
397 397  
398 -You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
544 +(% style="color:red" %)**Note:  The user can access the**(%%)** (% style="color:blue" %)Node-RED (% style="color:red" %)via click the 'Launch' button(%%)**
399 399  
400 400  
401 -Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
402 402  
548 +== **3). Troubleshooting:** ==
403 403  
404 -[[image:image-20220725172124-3.png||height="610" width="843"]]
405 405  
551 +* (((
552 +=== ** If the URL does not jump properly.** ===
553 +)))
406 406  
555 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
407 407  
408 -=== **Using Node-Red, InfluxDB and Grafana,** ===
557 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
409 409  
410 -The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
411 411  
560 +* (((
561 +=== ** How to install InfluxDB, Garfana.** ===
562 +)))
412 412  
413 -the users can refer to this link to install them.
564 + The LPS8V2 is not pre-installed with InfluxDB and Garfana, the users can install them, see [[InfluxDB>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
414 414  
415 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
416 416  
567 +* (((
568 +=== ** How to upgrade the gateway node.js to the latest version.** ===
569 +)))
417 417  
418 -= **5. How users can access LPS8v2 using serial USB** =
571 + The user can upgrade nodejs, see [[Upgrade Nodejs>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
419 419  
420 420  
421 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
574 +* (((
575 +=== ** How to bath register device on the built-in Chirpstack network server** ===
576 +)))
422 422  
578 + The user can register devices in batch on the gateway Web UI, see [[Bath Register>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H11.A0HowtouseChirpstackAPItobatchregisterSensorNode2FGatewayinChistapstackServer]]
423 423  
424 -Port 1 of the UART on the LPS8v2 is GND
425 425  
426 -(% class="box infomessage" %)
427 -(((
428 -**TXD  <~-~--> UART RXD (Gray line)**
581 +* (((
582 +=== ** Why my gateway is not Chirpstack?** ===
583 +)))
429 429  
430 -**RXD  <~-~--> UART TXD (White line)**
585 + After June '23, the default factory LPS8V2 pre-installed Chirpstack-V4 instead of The Things Stack, the users can migrate to Chistack-V4, see **[[Change TTN Stack v3 to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
431 431  
432 -**GND <~-~--> GND (Black line)**
587 +
588 +* (((
589 +=== ** How to disable the built-in server** ===
433 433  )))
434 434  
592 +(% class="box infomessage" %)
593 +(((
594 +Use the following commands to start and stop the TTNv3 service:**     **
435 435  
436 -**LPS8v2 UART connection photo**
596 +**# start**
597 +systemctl start ttnstack
437 437  
438 -[[image:image-20220804163015-1.png||height="621" width="466"]]
599 +**# stop**
600 +systemctl stop ttnstack
439 439  
602 +**# enable**
603 +systemctl enable ttnstack
440 440  
605 +**#disable**
606 +systemctl disable ttnstack
607 +)))
441 441  
442 -In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
609 +(% class="box infomessage" %)
610 +(((
611 +Use the following commands to start and stop the Node-Red service:
443 443  
613 +**# start**
614 +systemctl start nodered
444 444  
445 -[[image:image-20220804164928-3.png||height="320" width="332"]]
616 +**# stop**
617 +systemctl stop nodered
446 446  
619 +**# enable**
620 +systemctl enable nodered
447 447  
448 -[[image:image-20220804164747-2.png||height="622" width="594"]]
622 +**#disable**
623 +systemctl disable nodered
624 +)))
449 449  
450 450  
627 +* (((
628 +=== ** How to choose the Chirpstack server frequency SubBand** ===
629 +)))
451 451  
452 -= **6. Use the helium gateway-rs as the Data-only Hotspot** =
631 +**~ ** The user has to choose a SubBand if using CN470, US915, AU915, or AS923.
453 453  
633 + Note: Since the subbands of the Chirpstack are counted from 0, us915_1 of the Chirpstack is equal to US915 FSB2, so if your LoRa Rdio is using the US915 FSB2 you have to choose the us915_1 as the Chirpstack FSB.
454 454  
455 -== **Step 1: Configure Frequency Band** ==
635 +[[image:image-20230602140406-3.png||height="480" width="918"]]
456 456  
457 457  
458 -//Each country has a requirement for frequency region. Choose the right one for your area.//
638 +When the configuration is complete, click** "Save&Apply"**.
459 459  
460 -[[image:image-20220905164308-1.png]]
461 461  
641 +(% style="color:red" %)**Note:**(%%) When adding the device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
462 462  
643 +[[image:image-20230602143122-4.png||height="511" width="983"]]
463 463  
464 -== **Step 2: Configure the forward address** ==
465 465  
646 += 5. Watch Dog =
466 466  
467 -**Select one of the servers to configure.**
468 468  
469 -**For example:**
649 +LPS8-V2 supports the Watch Dog but is not enabled by the previous releases(2023-11-24 )
470 470  
471 -[[image:image-20220905164847-2.png]]
651 +The uses can be via the below method to enable Watch Dog:
472 472  
473 473  
654 +(% class="box infomessage" %)
655 +(((
656 +wget -P /tmp/ http:~/~/repo.dragino.com/release/tool/watchdog/enable_watchdog.sh && chmod +x /tmp/enable_watchdog.sh && /tmp/enable_watchdog.sh
657 +)))
474 474  
475 -== **Step 3: Download and Install the Helium-gateway-rs** ==
659 +[[image:image-20231124113209-1.png||height="470" width="1157"]]
476 476  
477 477  
478 -**Access the gateway CLI via SSH.**
479 479  
480 -[[image:image-20220905165222-3.png]]
663 += 6. How users can access LPS8-V2 using serial USB =
481 481  
482 482  
483 -**Download gateway-rs.**
666 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
484 484  
485 -[[image:image-20220905165715-5.png]]
668 +Port 1 of the UART on the LPS8-V2 is GND
486 486  
487 487  (% class="box infomessage" %)
488 488  (((
489 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
672 +**TXD  <~-~--> UART RXD (Gray line)**
673 +
674 +**RXD  <~-~--> UART TXD (White line)**
675 +
676 +**GND <~-~--> GND (Black line)**
490 490  )))
491 491  
679 +**LPS8v2 UART connection photo**
492 492  
493 -**Install gateway-rs.**
681 +[[image:image-20230421094319-2.png||height="351" width="392"]]
494 494  
495 -[[image:image-20220905165917-7.png]]
683 +In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
496 496  
685 +
686 +[[image:image-20220804164928-3.png||height="320" width="332"]]
687 +
688 +
689 +[[image:image-20220804164747-2.png||height="622" width="594"]]
690 +
691 +
692 += 7. OTA System Update =
693 +
694 +
695 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
696 +
697 +
698 +== 7.1 Auto-update method ==
699 +
700 +
701 +The default, each gateway will enable the auto-update function.
702 +
703 +this function will be triggered every boot and every midnight.
704 +
705 +
706 +Users can enable/disable it via Web Page
707 +
708 +[[image:image-20230607094447-2.png]]
709 +
710 +
711 +== 7.2 Manual upgrade method ==
712 +
713 +
714 +1). Using the Linux command to upgrade the system
715 +
716 +
497 497  (% class="box infomessage" %)
498 498  (((
499 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
719 +**apt update && apt install *dragino***
500 500  )))
501 501  
502 502  
503 -**Modify configuration.**
723 +2). Upgrade the system via the Web page button of "Manual Update"
504 504  
505 505  
506 -[[image:image-20220905173847-12.png]]
726 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
507 507  
728 +[[image:image-20230607093849-1.png]]
508 508  
730 +
731 +
732 += 8. FAQ =
733 +
734 +== 8.1 How to change Hostname ==
735 +
736 +
737 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
738 +
509 509  (% class="box infomessage" %)
510 510  (((
511 -**region=<Enter regional parameters> \
512 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
513 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
741 +hostnamectl set-hostname dragino-123456
514 514  )))
515 515  
744 +[[image:image-20230517102429-1.png]]
516 516  
517 -**Restart the helium_gateway**
746 +After the configuration is complete, run "reboot" to restart the gateway.
518 518  
519 -[[image:image-20220905170920-9.png]]
520 520  
749 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
521 521  
751 +
752 +Migrate guide:
753 +
754 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
755 +
756 +**2. On the Server ~-~-> Network Server interface, click "Management"**
757 +
758 +[[image:image-20230616162454-1.png]]
759 +
760 +
761 +**3. Click "Migrate-Chirpstack"**
762 +
763 +[[image:image-20230616162742-2.png]]
764 +
765 +
766 +**4. Strat Install **
767 +
768 +Click start Install and wait until the migration succeeds
769 +
770 +[[image:image-20230616162934-3.png]]
771 +
772 +
773 +**5.Migration complete check result**
774 +
775 +[[image:image-20230616174526-4.png||height="706" width="983"]]
776 +
777 +
778 +[[image:image-20230616180004-9.png]]
779 +
780 +
781 +== 8.3 How to reduce the 4g data consumed ==
782 +
783 +
784 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
785 +
786 +[[image:image-20230719100239-1.png||height="724" width="994"]]
787 +
788 +
789 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
790 +
791 +[[image:image-20230719100332-2.png]]
792 +
793 +
794 +3. Disable the auto-update:
795 +
796 +[[image:image-20230719100419-3.png||height="458" width="995"]]
797 +
798 +
799 +== 8.4 How to connect the helium blockchain as a Data-only hotspot ==
800 +
801 +
522 522  (% class="box infomessage" %)
523 523  (((
524 -**systemctl restart helium_gateway**
804 +apt update && apt install helium-gateway
525 525  )))
526 526  
527 527  
528 -**Check the helium_gateway Log：**
808 +== 8.5 How to change built-in LoRaWAN Server from ChirpStack v4 to TTN Stack v3. ==
529 529  
530 -[[image:image-20220905173952-13.png]]
531 531  
811 +By default, the LPS8v2's built-in server is ChirpStack v4,
532 532  
813 +If the user needs to change the built-in server from ChirpStack v4 to TTN Stack v3, the User needs to download the image and flash it to the LPS8v2 gateway:
814 +
815 +[[https:~~/~~/www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0>>https://www.dropbox.com/scl/fi/qwtaw4i4dqonzramr93e4/dragino-LPS8V2-TTN-231124.rar?rlkey=nrftlkd1h8en6j07vzbhpj9ui&dl=0]]
816 +
817 +
818 +Image flash steps: [[How to flash a new image(OS) to the gateway(LPS8V2)>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.3A0Howtoflashanewimage28OS29tothegateway28LPS8V229]]
819 +
820 +
821 +== 8.6 How do I view gateway logs ==
822 +
823 +=== 8.6.1 LoRaWAN Log: ===
824 +
825 +==== Semtech UDP Log : ====
826 +
827 +When the gateway starts LoRaWAN Semtech UDP, users can check the logs of the Semtech UDP in the **LogRead ~-~-> System Log** interface
828 +
829 +[[image:image-20231017112115-2.png||height="611" width="821"]]
830 +
831 +
832 +==== Station Log: ====
833 +
834 +When the gateway starts Basic Station, users can check the logs of the station in the **LogRead ~-~-> System Log** interface
835 +
836 +[[image:image-20231017111606-1.png||height="622" width="821"]]
837 +
838 +
839 +=== 8.6.2  4G Log ===
840 +
841 +The user needs to access the Linux console of the gateway and enter the following command:
842 +
533 533  (% class="box infomessage" %)
534 534  (((
535 -**journalctl -u helium_gateway -f**
845 +cat /var/log/qmilog.txt
536 536  )))
537 537  
848 +[[image:image-20231017114417-3.png||height="543" width="679"]]
538 538  
539 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
850 +=== 8.6.3 Dmesg Log ===
540 540  
541 -where the helium gateway log is shown:
852 +Users can check the logs of the Dmesg in the **LogRead ~-~-> System Log** interface:
542 542  
543 -[[image:image-20220905174534-14.png]]
854 +[[image:image-20231017115330-5.png||height="565" width="740"]]
544 544  
545 545  
546 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
857 +=== 8.6.4 Record Log ===
547 547  
859 +Users can record DMESG logs and LoRaWAN logs on the **LogRead ~-~->Record Log** interface
548 548  
861 +[[image:image-20231017115124-4.png||height="215" width="880"]]
549 549  
550 -= **7. Trouble Shooting** =
551 551  
864 += 9. Trouble Shooting =
552 552  
553 -== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
866 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
554 554  
555 555  
556 556  [[image:image-20220920135918-1.png]]
... ... @@ -568,21 +568,87 @@
568 568  [[image:image-20220920141936-2.png]]
569 569  
570 570  
884 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
571 571  
572 572  
573 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
887 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
574 574  
889 +[[image:image-20230508171607-1.png]]
575 575  
891 +
892 +== 9.3  Fallback IP does not work, how can users check ==
893 +
894 +
895 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
896 +
897 +
898 +**1.Check whether the configuration is correct**
899 +
900 +Run the CMD command to ipconfig and ping 172.31.255.254.
901 +
902 +If this fails, the user needs to reconfigure.
903 +
904 +[[image:image-20230413170224-3.png||height="433" width="707"]]
905 +
906 +[[image:image-20230413170246-4.png]]
907 +
908 +
909 +**2. Check whether the firewall is disabled**
910 +
911 +If the firewall is not down, this will affect access to the gateway.
912 +
913 +
914 +== 9.4  Click "Manual_Update", why there is no response? ==
915 +
916 +
917 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
918 +
919 +
920 +[[image:image-20230527090555-3.png||height="660" width="832"]]
921 +
922 +
923 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
924 +
925 +
926 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
927 +
928 +
929 +(% class="box infomessage" %)
576 576  (((
577 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
931 +apt update && apt install *dragino*
932 +
933 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
578 578  )))
579 579  
936 +
937 +== 9.6  How to reset the built-in server ==
938 +
939 +
940 +**1) Build-in The Things Network**
941 +
942 +Refer to this link to delete the Built-in server's device.
943 +
944 +[[Delete devices from Build-in The Things Network>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Delete%20devices%20from%20Build-in%20The%20Things%20Network/]]
945 +
946 +
947 +**2) Build-in Chirpstack**
948 +
949 +Users need to click "Reset" on the Server~-~->NetServer interface, ChirpStack will be reset.
950 +
951 +[[image:image-20231106180846-5.png||height="310" width="668"]]
952 +
953 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
954 +
955 +
580 580  (((
581 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
957 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
958 +)))
582 582  
960 +(((
961 +With your question as detailed as possible. We will reply and help you in the shortest.
583 583  
584 584  
585 -= **9. Reference** =
964 += 11. Reference =
586 586  
587 587  
588 588  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
... ... @@ -591,7 +591,7 @@
591 591  
592 592  )))
593 593  
594 -= **10. Order Info** =
973 += 12. Order Info =
595 595  
596 596  
597 597  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -599,26 +599,33 @@
599 599  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
600 600  
601 601  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
981 +
602 602  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
983 +
603 603  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
985 +
604 604  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
987 +
605 605  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
989 +
606 606  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
607 607  
608 608  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
609 609  
610 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
611 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
612 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
613 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
994 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
614 614  
615 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
996 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
616 616  
998 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
617 617  
1000 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
618 618  
619 -= **10. Manufacturer Info** =
1002 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
620 620  
621 621  
1005 += 13. Manufacturer Info =
1006 +
1007 +
622 622  **Shenzhen Dragino Technology Development co. LTD**
623 623  
624 624  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -626,10 +626,9 @@
626 626  LongCheng Street, LongGang District ; Shenzhen 518116,China
627 627  
628 628  
1015 += 14. FCC Warning =
629 629  
630 -= **11. FCC Warning** =
631 631  
632 -
633 633  (((
634 634  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
635 635  )))
Delete Device.docx
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +336.4 KB
Content
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20231017111606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +117.6 KB
Content
image-20231017112115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20231017114417-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +130.4 KB
Content
image-20231017115124-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +28.6 KB
Content
image-20231017115330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20231031162854-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20231031162927-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
image-20231106175329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175457-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20231106175523-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +64.8 KB
Content
image-20231106180816-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.6 KB
Content
image-20231106180846-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.9 KB
Content
image-20231124113209-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +198.7 KB
Content
image-20231201165904-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.5 KB
Content
image-20231201170355-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +70.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0