Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 114.1 >
edited by Kilight Cao
on 2022/11/04 15:44
To version < 231.1 >
edited by Xiaoye
on 2023/07/19 10:02
>
Change comment: Uploaded new attachment "image-20230719100239-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -16,23 +16,22 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  )))
29 29  
30 30  (((
31 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  )))
33 33  
34 34  (((
35 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,14 +40,13 @@
40 40  )))
41 41  
42 42  (((
43 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -59,18 +59,18 @@
59 59  * 10M/100M RJ45 Ports x 1
60 60  * Multi-Channel LoRaWAN Wireless
61 61  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 +== 1.3 Features ==
69 69  
70 70  
71 -== **1.3 Features** ==
72 -
73 -
74 74  * Open Source Debian system
75 75  * Managed by Web GUI, SSH via WAN or WiFi
76 76  * Remote Management
... ... @@ -83,74 +83,79 @@
83 83  ** Semtech UDP Packet Forwarder
84 84  ** LoRaWAN Basic Station
85 85  ** ChirpStack-Gateway-Bridge (MQTT)
86 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
84 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
85 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
88 88  
87 +== 1.4 LED Indicators ==
89 89  
90 90  
91 -== **1.4 Block Diagram** ==
90 +LPS8-V2 has totally four LEDs, They are:
92 92  
93 93  
93 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
94 94  
95 -== **1.5 LED Indicators** ==
95 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
96 96  
97 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
97 97  
98 -LPS8-V2 has totally four LEDs, They are:
99 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
99 99  
101 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
100 100  
101 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
103 + ✓** SOLID RED:** Device doesn't have an Internet connection.
102 102  
103 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
105 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
104 104  
105 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
106 106  
107 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
108 +== 1.5 Button Intruction ==
108 108  
109 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
110 110  
111 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
111 +LPS8-V2 has a black toggle button, which is:
112 112  
113 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
114 114  
114 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
115 115  
116 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
116 116  
117 -== **1.6 Button Intruction** ==
118 118  
119 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
119 119  
120 -LPS8-V2 has a black toggle button, which is:
121 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
121 121  
122 122  
123 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
124 += 2. Quick Start =
124 124  
125 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
126 126  
127 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
127 127  
128 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
129 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
129 129  
130 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
131 131  
132 +== 2.1 Access and Configure LPS8-V2 ==
132 132  
134 +=== 2.1.1 Find IP address of LPS8-V2 ===
133 133  
134 -= **2. Quick Start** =
135 135  
137 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
136 136  
137 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
138 138  
139 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
140 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
140 140  
142 +(% style="background-color:yellow" %)**dragino+dragino**
141 141  
144 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
142 142  
143 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
146 +[[image:image-20230527084515-1.png]]
144 144  
148 +[[image:image-20230527085250-2.png||height="495" width="284"]]
145 145  
146 -== **2.1.1 connect the network.** ==
147 147  
148 148  
149 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
152 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
150 150  
151 151  
152 152  (((
153 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
156 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
154 154  )))
155 155  
156 156  (((
... ... @@ -161,9 +161,40 @@
161 161  
162 162  
163 163  
164 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
167 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
165 165  
166 166  
170 +[[image:image-20230107084650-2.png||height="310" width="839"]]
171 +
172 +
173 +(% style="color:blue" %)**Steps to connect via fallback IP:**
174 +
175 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 +
177 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
178 +
179 +
180 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
181 +
182 +
183 +As in the below photo:
184 +
185 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 +
187 +
188 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 +
190 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
191 +
192 +
193 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
194 +
195 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
196 +
197 +
198 +
199 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
200 +
167 167  [[image:image-20220622100542-2.png||height="369" width="1256"]]
168 168  
169 169  
... ... @@ -183,13 +183,104 @@
183 183  [[image:image-20220622102901-8.png||height="476" width="938"]]
184 184  
185 185  
220 +=== 2.1.2 Access Configure Web UI ===
186 186  
187 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
188 188  
223 +**Web Interface**
189 189  
190 -=== **2.2.1 Select your area frequency** ===
225 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
191 191  
192 192  
228 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
229 +
230 +You will see the login interface of LPS8-V2 as shown below.
231 +
232 +The account details for Web Login are:
233 +
234 +(% style="color:blue" %)**User Name: root**
235 +
236 +(% style="color:blue" %)**Password:   dragino**
237 +
238 +[[image:image-20230106153501-1.png||height="367" width="894"]]
239 +
240 +
241 +== 2.2  Typical Network Setup ==
242 +
243 +=== 2.2.1  Overview ===
244 +
245 +
246 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
247 +
248 +* **WAN Port Internet Mode**
249 +
250 +* **WiFi Client Mode**
251 +
252 +* **Cellular Mode**
253 +
254 +=== 2.2.2  Use WAN port to access Internet ===
255 +
256 +
257 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
258 +
259 +
260 +[[image:image-20230411100633-2.png||height="501" width="935"]]
261 +
262 +
263 +=== 2.2.3  Access the Internet as a WiFi Client ===
264 +
265 +
266 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 +
268 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
269 +
270 +[[image:image-20230411095739-1.png||height="264" width="691"]]
271 +
272 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
273 +
274 +
275 +=== 2.2.4  Use built-in 4G modem for internet access ===
276 +
277 +
278 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
279 +
280 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
281 +
282 +
283 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
284 +
285 +First, install the Micro SIM card as below direction
286 +
287 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
288 +
289 +
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
291 +
292 +
293 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
294 +
295 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
296 +
297 +
298 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
299 +
300 +
301 +=== 2.2.5  Check Internet connection ===
302 +
303 +
304 +In the **home** page, we can check the Internet connection.
305 +
306 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
309 +
310 +[[image:image-20230411101534-3.png||height="544" width="942"]]
311 +
312 +
313 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
314 +
315 +=== 2.3.1 Select your area frequency ===
316 +
317 +
193 193  (((
194 194  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
195 195  
... ... @@ -199,10 +199,9 @@
199 199  [[image:image-20220622103332-9.png||height="485" width="938"]]
200 200  
201 201  
327 +=== 2.3.2 Get the only gateway EUI ===
202 202  
203 -=== **2.2.2 Get the only gateway EUI** ===
204 204  
205 -
206 206  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
207 207  
208 208  
... ... @@ -224,10 +224,9 @@
224 224  [[image:image-20220622103956-12.png]]
225 225  
226 226  
351 +=== 2.3.3 Register the gateway to The Things Network ===
227 227  
228 -== **2.2.3 Register the gateway to The Things Network** ==
229 229  
230 -
231 231  **Login to The Things Network**
232 232  
233 233  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -241,34 +241,30 @@
241 241  **Get it online**
242 242  
243 243  
367 += 3. Web Configure Pages =
244 244  
245 -= **3. Web Configure Pages** =
369 +== 3.1 Home ==
246 246  
247 247  
248 -== **3.1 Home** ==
372 +Shows the system running status:
249 249  
250 -
251 -//Shows the system running status~://
252 -
253 253  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
254 254  
255 255  
377 +== 3.2 LoRa Settings ==
256 256  
257 -== **3.2 LoRa Settings** ==
379 +=== 3.2.1 LoRa ~-~-> LoRa ===
258 258  
259 259  
260 -=== **3.2.1 LoRa ~-~-> LoRa** ===
382 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
261 261  
384 +Different LPS8v2 hardware versions can support different frequency ranges:
262 262  
263 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
386 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
387 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
264 264  
265 -//Different LPS8v2 hardware versions can support different frequency ranges~://
266 -
267 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
268 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
269 -
270 270  (% class="wikigeneratedid" %)
271 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
390 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
272 272  
273 273  
274 274  (% class="wikigeneratedid" %)
... ... @@ -280,26 +280,23 @@
280 280  )))
281 281  
282 282  
402 +== 3.3 LoRaWAN Settings ==
283 283  
284 -== **3.3 LoRaWAN Settings** ==
404 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
285 285  
286 286  
287 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
407 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
288 288  
289 289  
290 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
291 -
292 -
293 293  [[image:image-20220616111932-2.png||height="516" width="672"]]
294 294  
295 295  
413 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
296 296  
297 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
298 298  
416 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
299 299  
300 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
301 301  
302 -
303 303  [[image:image-20220616113246-3.png||height="396" width="672"]]
304 304  
305 305  
... ... @@ -308,97 +308,149 @@
308 308  )))
309 309  
310 310  
427 +== 3.4 Network Settings ==
311 311  
312 -== **3.4 Network Settings** ==
429 +=== 3.4.1 Network ~-~-> WiFi ===
313 313  
431 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
314 314  
315 -=== **3.4.1 Network ~-~-> WiFi** ===
433 +[[image:image-20230619095946-1.png||height="332" width="827"]]
316 316  
317 317  
318 -[[image:image-20220616114756-4.png||height="251" width="669"]]
436 +=== 3.4.2 Network ~-~-> System Status ===
319 319  
320 320  
439 +[[image:image-20220820134112-2.png||height="539" width="668"]]
321 321  
322 -=== **3.4.2 Network ~-~-> System Status** ===
323 323  
442 +=== 3.4.3 Network ~-~-> Network ===
324 324  
325 -[[image:image-20220820134112-2.png||height="539" width="668"]]
326 326  
445 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
327 327  
447 +[[image:image-20230214093657-2.png||height="333" width="858"]]
328 328  
329 -=== **3.4.3 Network ~-~-> Firewall** ===
330 330  
450 +=== 3.4.4 Network ~-~-> Cellular ===
331 331  
332 -[[image:image-20220616115351-6.png||height="244" width="661"]]
333 333  
453 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
334 334  
455 +(% style="color:red" %)**Note: APN cannot be empty.**
335 335  
336 -== **3.5 System** ==
457 +[[image:image-20230228115126-1.png]]
337 337  
338 338  
339 -=== **3.5.1  System ~-~-> System Overview** ===
460 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
340 340  
462 +[[image:image-20230228115535-2.png||height="478" width="888"]]
341 341  
464 +
465 +== 3.5 System ==
466 +
467 +=== 3.5.1 System ~-~-> System Overview ===
468 +
469 +
342 342  Shows the system info:
343 343  
344 344  [[image:image-20220917144512-5.png||height="618" width="853"]]
345 345  
346 346  
475 +=== 3.5.2 System ~-~-> System General ===
347 347  
348 -=== **3.5.2 System ~-~-> Backup/Restore** ===
349 349  
478 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
350 350  
480 +In addition, Users can customize the FallBack IP address.
481 +
482 +[[image:image-20230214094058-3.png]]
483 +
484 +
485 +=== 3.5.3 System ~-~-> Backup/Restore ===
486 +
487 +
351 351  [[image:image-20220917144725-6.png||height="208" width="869"]]
352 352  
353 353  
491 +=== 3.5.4 System ~-~-> Remoteit ===
354 354  
355 -= **4. Build-in Server** =
356 356  
494 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
357 357  
358 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
359 359  
497 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
360 360  
361 -[[image:image-20220820115644-1.png||height="217" width="778"]]
499 +[[image:image-20221230092303-2.png]]
362 362  
363 363  
502 +=== 3.5.5 System ~-~-> Package Management ===
503 +
504 +
505 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
506 +
507 +[[image:image-20230214094316-4.png]]
508 +
509 +
510 += 4. Build-in Server =
511 +
512 +
513 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
514 +
515 +[[image:image-20230616175617-8.png||height="390" width="894"]]
516 +
517 +[[image:image-20230616175558-7.png||height="362" width="894"]]
518 +
519 +
520 +
364 364  (% style="color:red" %)**Note:**
365 365  
366 - **Path**: System ~-~-> Built-in Server
523 + **Path**: Server ~-~-> Network Server
367 367  
525 + Server ~-~-> Application Server
368 368  
527 +
369 369  **Troubleshooting:**
370 370  
371 371  
372 372  **~ 1. URL does not jump properly**
373 373  
374 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
533 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
375 375  
376 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
535 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
377 377  
378 378  
538 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
379 379  
380 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
381 381  
541 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
382 382  
383 -You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
384 -
385 385  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
386 386  
387 387  
388 388  Login account:
389 389  
390 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
548 +**Username : ** (% style="background-color:yellow" %)**admin**
391 391  
392 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
550 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
393 393  
552 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
394 394  
395 -[[image:image-20220725171719-1.png||height="570" width="769"]]
396 396  
397 397  
556 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
398 398  
399 -== **4.2 Application Server ~-~- Node-Red** ==
400 400  
559 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
401 401  
561 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
562 +
563 +[[image:image-20230321092456-1.png]]
564 +
565 +
566 +
567 +== 4.2 Application Server ~-~- Node-Red ==
568 +
569 +
402 402  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
403 403  
404 404  
... ... @@ -409,16 +409,104 @@
409 409  
410 410  
411 411  
412 -= **5. How users can access LPS8v2 using serial USB** =
580 +=== **Using Node-Red, InfluxDB and Grafana** ===
413 413  
582 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
414 414  
415 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
416 416  
585 +the users can refer to this link to install them.
417 417  
418 -Port 1 of the UART on the LPS8v2 is GND
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
419 419  
589 +
590 +=== **Upgrade the node.js** ===
591 +
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
593 +
594 +
595 +the users can refer to this link to upgrade them.
596 +
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
598 +
599 +
600 +== 4.3 How to disable the built-in server ==
601 +
602 +
603 +Use the following commands to start and stop the TTNv3 service:
604 +
420 420  (% class="box infomessage" %)
421 421  (((
607 +**# start**
608 +systemctl start ttnstack
609 +
610 +**# stop**
611 +systemctl stop ttnstack
612 +
613 +**# enable**
614 +systemctl enable ttnstack
615 +
616 +**#disable**
617 +systemctl disable ttnstack
618 +)))
619 +
620 +Use the following commands to start and stop the Node-Red service:
621 +
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
626 +
627 +**# stop**
628 +systemctl stop nodered
629 +
630 +**# enable**
631 +systemctl enable nodered
632 +
633 +**#disable**
634 +systemctl disable nodered
635 +)))
636 +
637 +
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
639 +
640 +
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
642 +
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
644 +
645 +
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
647 +
648 +
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
650 +
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
652 +
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
654 +
655 +
656 +When the configuration is complete, click** "Save&Apply"**.
657 +
658 +
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 +
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
662 +
663 +
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
665 +
666 +
667 +
668 += 6. How users can access LPS8-V2 using serial USB =
669 +
670 +
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
672 +
673 +
674 +Port 1 of the UART on the LPS8-V2 is GND
675 +
676 +(% class="box infomessage" %)
677 +(((
422 422  **TXD  <~-~--> UART RXD (Gray line)**
423 423  
424 424  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -429,10 +429,9 @@
429 429  
430 430  **LPS8v2 UART connection photo**
431 431  
432 -[[image:image-20220804163015-1.png||height="621" width="466"]]
433 433  
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
434 434  
435 -
436 436  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
437 437  
438 438  
... ... @@ -442,111 +442,101 @@
442 442  [[image:image-20220804164747-2.png||height="622" width="594"]]
443 443  
444 444  
700 += 7. OTA System Update =
445 445  
446 -= **6. Use the helium gateway-rs as the Data-only Hotspot** =
447 447  
703 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
448 448  
449 -== **Step 1: Configure Frequency Band** ==
450 450  
706 +== 7.1 Auto-update method ==
451 451  
452 -//Each country has a requirement for frequency region. Choose the right one for your area.//
453 453  
454 -[[image:image-20220905164308-1.png]]
709 +The default, each gateway will enable the auto-update function.
455 455  
711 +this function will be triggered every boot and every midnight.
456 456  
457 457  
458 -== **Step 2: Configure the forward address** ==
714 +Users can enable/disable it via Web Page
459 459  
716 +[[image:image-20230607094447-2.png]]
460 460  
461 -**Select one of the servers to configure.**
462 462  
463 -**For example:**
719 +== 7.2 Manual upgrade method ==
464 464  
465 -[[image:image-20220905164847-2.png]]
466 466  
722 +1). Using the Linux command to upgrade the system
467 467  
468 468  
469 -== **Step 3: Download and Install the Helium-gateway-rs** ==
725 +(% class="box infomessage" %)
726 +(((
727 +**apt update && apt install *dragino***
728 +)))
470 470  
471 471  
472 -**Access the gateway CLI via SSH.**
731 +2). Upgrade the system via the Web page button of "Manual Update"
473 473  
474 -[[image:image-20220905165222-3.png]]
475 475  
734 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
476 476  
477 -**Download gateway-rs.**
736 +[[image:image-20230607093849-1.png]]
478 478  
479 -[[image:image-20220905165715-5.png]]
480 480  
481 -(% class="box infomessage" %)
482 -(((
483 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
484 -)))
739 += 8. FAQ =
485 485  
741 +== 8.1 How to change Hostname ==
486 486  
487 -**Install gateway-rs.**
488 488  
489 -[[image:image-20220905165917-7.png]]
744 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
490 490  
491 491  (% class="box infomessage" %)
492 492  (((
493 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
748 +hostnamectl set-hostname dragino-123456
494 494  )))
495 495  
751 +[[image:image-20230517102429-1.png]]
496 496  
497 -**Modify configuration.**
753 +After the configuration is complete, run "reboot" to restart the gateway.
498 498  
499 499  
500 -[[image:image-20220905173847-12.png]]
756 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
501 501  
502 502  
503 -(% class="box infomessage" %)
504 -(((
505 -**region=<Enter regional parameters> \
506 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
507 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
508 -)))
759 +Migrate guide:
509 509  
761 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
510 510  
511 -**Restart the helium_gateway**
763 +**2. On the Server ~-~-> Network Server interface, click "Management"**
512 512  
513 -[[image:image-20220905170920-9.png]]
765 +[[image:image-20230616162454-1.png]]
514 514  
515 515  
516 -(% class="box infomessage" %)
517 -(((
518 -**systemctl restart helium_gateway**
519 -)))
768 +**3. Click "Migrate-Chirpstack"**
520 520  
770 +[[image:image-20230616162742-2.png]]
521 521  
522 -**Check the helium_gateway Log：**
523 523  
524 -[[image:image-20220905173952-13.png]]
773 +**4. Strat Install **
525 525  
526 526  
527 -(% class="box infomessage" %)
528 -(((
529 -**journalctl -u helium_gateway -f**
530 -)))
776 +Click start Install and wait until the migration succeeds
531 531  
778 +[[image:image-20230616162934-3.png]]
532 532  
533 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
534 534  
535 -where the helium gateway log is shown:
781 +**5.Migration complete check result**
536 536  
537 -[[image:image-20220905174534-14.png]]
783 +[[image:image-20230616174526-4.png||height="706" width="983"]]
538 538  
539 539  
540 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
786 +[[image:image-20230616180004-9.png]]
541 541  
542 542  
543 543  
544 -= **7. Trouble Shooting** =
790 += 9. Trouble Shooting =
545 545  
792 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
546 546  
547 -== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
548 548  
549 -
550 550  [[image:image-20220920135918-1.png]]
551 551  
552 552  
... ... @@ -562,23 +562,59 @@
562 562  [[image:image-20220920141936-2.png]]
563 563  
564 564  
810 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
565 565  
566 566  
567 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
813 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
568 568  
815 +[[image:image-20230508171607-1.png]]
569 569  
817 +
818 +== 9.3  Fallback IP does not work, how can users check ==
819 +
820 +
821 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
822 +
823 +
824 +**1.Check whether the configuration is correct**
825 +
826 +Run the CMD command to ipconfig and ping 172.31.255.254.
827 +
828 +If this fails, the user needs to reconfigure.
829 +
830 +[[image:image-20230413170224-3.png||height="433" width="707"]]
831 +
832 +[[image:image-20230413170246-4.png]]
833 +
834 +
835 +**2. Check whether the firewall is disabled**
836 +
837 +If the firewall is not down, this will affect access to the gateway.
838 +
839 +
840 +== 9.4  Click "Manual_Update", why there is no response? ==
841 +
842 +
843 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
844 +
845 +
846 +[[image:image-20230527090555-3.png||height="660" width="832"]]
847 +
848 +
849 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
850 +
851 +
570 570  (((
571 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
853 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
572 572  )))
573 573  
574 574  (((
575 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
857 +With your question as detailed as possible. We will reply and help you in the shortest.
576 576  
577 577  
860 += 11. Reference =
578 578  
579 -= **9. Reference** =
580 580  
581 -
582 582  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
583 583  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
584 584  
... ... @@ -585,7 +585,7 @@
585 585  
586 586  )))
587 587  
588 -= **10. Order Info** =
869 += 12. Order Info =
589 589  
590 590  
591 591  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -593,26 +593,33 @@
593 593  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
594 594  
595 595  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
877 +
596 596  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
879 +
597 597  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
881 +
598 598  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
883 +
599 599  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
885 +
600 600  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
601 601  
602 602  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
603 603  
604 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
605 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
606 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
607 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
890 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
608 608  
609 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
892 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
610 610  
894 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
611 611  
896 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
612 612  
613 -= **10. Manufacturer Info** =
898 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
614 614  
615 615  
901 += 13. Manufacturer Info =
902 +
903 +
616 616  **Shenzhen Dragino Technology Development co. LTD**
617 617  
618 618  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -620,10 +620,9 @@
620 620  LongCheng Street, LongGang District ; Shenzhen 518116,China
621 621  
622 622  
911 += 14. FCC Warning =
623 623  
624 -= **11. FCC Warning** =
625 625  
626 -
627 627  (((
628 628  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
629 629  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0