Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 113.2 >
edited by Xiaoling
on 2022/09/26 15:03
To version < 213.1 >
edited by Xiaoye
on 2023/06/07 09:38
>
Change comment: Uploaded new attachment "image-20230607093849-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -16,23 +16,22 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  )))
29 29  
30 30  (((
31 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  )))
33 33  
34 34  (((
35 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,14 +40,13 @@
40 40  )))
41 41  
42 42  (((
43 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -59,19 +59,20 @@
59 59  * 10M/100M RJ45 Ports x 1
60 60  * Multi-Channel LoRaWAN Wireless
61 61  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 70  
71 +== 1.3 Features ==
71 71  
72 -== **1.3 Features** ==
73 73  
74 -
75 75  * Open Source Debian system
76 76  * Managed by Web GUI, SSH via WAN or WiFi
77 77  * Remote Management
... ... @@ -84,75 +84,85 @@
84 84  ** Semtech UDP Packet Forwarder
85 85  ** LoRaWAN Basic Station
86 86  ** ChirpStack-Gateway-Bridge (MQTT)
87 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
88 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
89 89  
90 90  
91 91  
91 +== 1.4 Block Diagram ==
92 92  
93 -== **1.4 Block Diagram** ==
94 94  
95 95  
95 +== 1.5 LED Indicators ==
96 96  
97 -== **1.5 LED Indicators** ==
98 98  
99 -
100 100  LPS8-V2 has totally four LEDs, They are:
101 101  
102 102  
103 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
101 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
104 104  
105 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
103 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
106 106  
107 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
105 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
108 108  
109 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
107 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
110 110  
111 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
109 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
112 112  
113 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
111 + ✓** SOLID RED:** Device doesn't have an Internet connection.
114 114  
115 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
113 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
116 116  
117 117  
116 +== 1.6 Button Intruction ==
118 118  
119 -== **1.6 Button Intruction** ==
120 120  
121 -
122 122  LPS8-V2 has a black toggle button, which is:
123 123  
124 124  
125 125  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
126 126  
127 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
124 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
128 128  
129 129  
130 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
127 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
131 131  
132 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
129 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
133 133  
134 134  
132 += 2. Quick Start =
135 135  
136 -= **2. Quick Start** =
137 137  
138 -
139 139  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
140 140  
141 141  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 142  
143 143  
140 +== 2.1 Connects to the network and accesses the gateway Web UI ==
144 144  
145 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
142 +=== 2.1.1 connect the network ===
146 146  
147 147  
148 -== **2.1.1 connect the network.** ==
145 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
149 149  
150 150  
151 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
148 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
152 152  
150 +(% style="background-color:yellow" %)**dragino+dragino**
153 153  
152 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
153 +
154 +[[image:image-20230527084515-1.png]]
155 +
156 +[[image:image-20230527085250-2.png||height="495" width="284"]]
157 +
158 +
159 +
160 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
161 +
162 +
154 154  (((
155 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
164 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
156 156  )))
157 157  
158 158  (((
... ... @@ -163,34 +163,43 @@
163 163  
164 164  
165 165  
166 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
175 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
167 167  
168 168  
169 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
178 +[[image:image-20230107084650-2.png||height="310" width="839"]]
170 170  
171 171  
172 -(((
173 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
174 -)))
181 +(% style="color:blue" %)**Steps to connect via fallback IP:**
175 175  
183 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 176  
185 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
177 177  
178 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
179 179  
180 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
188 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
181 181  
182 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
191 +As in the below photo:
184 184  
185 -[[image:image-20220622101433-4.png]]
193 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 186  
187 187  
188 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
196 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 189  
198 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 190  
191 -[[image:image-20220622102210-5.png||height="504" width="919"]]
192 192  
201 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
193 193  
203 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
204 +
205 +
206 +
207 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
208 +
209 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
210 +
211 +
194 194  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
195 195  
196 196  
... ... @@ -207,13 +207,106 @@
207 207  [[image:image-20220622102901-8.png||height="476" width="938"]]
208 208  
209 209  
228 +=== 2.1.2 Access Configure Web UI ===
210 210  
211 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
212 212  
231 +**Web Interface**
213 213  
214 -=== **2.2.1 Select your area frequency** ===
233 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
215 215  
216 216  
236 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
237 +
238 +You will see the login interface of LPS8-V2 as shown below.
239 +
240 +The account details for Web Login are:
241 +
242 +(% style="color:blue" %)**User Name: root**
243 +
244 +(% style="color:blue" %)**Password:   dragino**
245 +
246 +[[image:image-20230106153501-1.png||height="367" width="894"]]
247 +
248 +
249 +== 2.2  Typical Network Setup ==
250 +
251 +=== 2.2.1  Overview ===
252 +
253 +
254 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
255 +
256 +* **WAN Port Internet Mode**
257 +
258 +* **WiFi Client Mode**
259 +
260 +* **Cellular Mode**
261 +
262 +
263 +
264 +=== 2.2.2  Use WAN port to access Internet ===
265 +
266 +
267 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
268 +
269 +
270 +[[image:image-20230411100633-2.png||height="501" width="935"]]
271 +
272 +
273 +=== 2.2.3  Access the Internet as a WiFi Client ===
274 +
275 +
276 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
277 +
278 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
279 +
280 +[[image:image-20230411095739-1.png||height="264" width="691"]]
281 +
282 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
283 +
284 +
285 +=== 2.2.4  Use built-in 4G modem for internet access ===
286 +
287 +
288 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
289 +
290 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
291 +
292 +
293 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
294 +
295 +First, install the Micro SIM card as below direction
296 +
297 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
298 +
299 +
300 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
301 +
302 +
303 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
304 +
305 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
306 +
307 +
308 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
309 +
310 +
311 +=== 2.2.5  Check Internet connection ===
312 +
313 +
314 +In the **home** page, we can check the Internet connection.
315 +
316 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
317 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
318 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
319 +
320 +[[image:image-20230411101534-3.png||height="544" width="942"]]
321 +
322 +
323 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
324 +
325 +=== 2.3.1 Select your area frequency ===
326 +
327 +
217 217  (((
218 218  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
219 219  
... ... @@ -223,10 +223,9 @@
223 223  [[image:image-20220622103332-9.png||height="485" width="938"]]
224 224  
225 225  
337 +=== 2.3.2 Get the only gateway EUI ===
226 226  
227 -=== **2.2.2 Get the only gateway EUI** ===
228 228  
229 -
230 230  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
231 231  
232 232  
... ... @@ -248,10 +248,9 @@
248 248  [[image:image-20220622103956-12.png]]
249 249  
250 250  
361 +=== 2.3.3 Register the gateway to The Things Network ===
251 251  
252 -== **2.2.3 Register the gateway to The Things Network** ==
253 253  
254 -
255 255  **Login to The Things Network**
256 256  
257 257  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -265,34 +265,30 @@
265 265  **Get it online**
266 266  
267 267  
377 += 3. Web Configure Pages =
268 268  
269 -= **3. Web Configure Pages** =
379 +== 3.1 Home ==
270 270  
271 271  
272 -== **3.1 Home** ==
382 +Shows the system running status:
273 273  
274 -
275 -//Shows the system running status~://
276 -
277 277  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
278 278  
279 279  
387 +== 3.2 LoRa Settings ==
280 280  
281 -== **3.2 LoRa Settings** ==
389 +=== 3.2.1 LoRa ~-~-> LoRa ===
282 282  
283 283  
284 -=== **3.2.1 LoRa ~-~-> LoRa** ===
392 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
285 285  
394 +Different LPS8v2 hardware versions can support different frequency ranges:
286 286  
287 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
396 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
397 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
288 288  
289 -//Different LPS8v2 hardware versions can support different frequency ranges~://
290 -
291 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
292 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
293 -
294 294  (% class="wikigeneratedid" %)
295 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
400 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
296 296  
297 297  
298 298  (% class="wikigeneratedid" %)
... ... @@ -304,26 +304,23 @@
304 304  )))
305 305  
306 306  
412 +== 3.3 LoRaWAN Settings ==
307 307  
308 -== **3.3 LoRaWAN Settings** ==
414 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
309 309  
310 310  
311 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
417 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
312 312  
313 313  
314 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
315 -
316 -
317 317  [[image:image-20220616111932-2.png||height="516" width="672"]]
318 318  
319 319  
423 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
320 320  
321 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
322 322  
426 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
323 323  
324 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
325 325  
326 -
327 327  [[image:image-20220616113246-3.png||height="396" width="672"]]
328 328  
329 329  
... ... @@ -332,57 +332,95 @@
332 332  )))
333 333  
334 334  
437 +== 3.4 Network Settings ==
335 335  
336 -== **3.4 Network Settings** ==
439 +=== 3.4.1 Network ~-~-> WiFi ===
337 337  
338 338  
339 -=== **3.4.1 Network ~-~-> WiFi** ===
442 +[[image:image-20220616114756-4.png||height="251" width="669"]]
340 340  
341 341  
342 -[[image:image-20220616114756-4.png||height="251" width="669"]]
445 +=== 3.4.2 Network ~-~-> System Status ===
343 343  
344 344  
448 +[[image:image-20220820134112-2.png||height="539" width="668"]]
345 345  
346 -=== **3.4.2 Network ~-~-> System Status** ===
347 347  
451 +=== 3.4.3 Network ~-~-> Network ===
348 348  
349 -[[image:image-20220820134112-2.png||height="539" width="668"]]
350 350  
454 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
351 351  
456 +[[image:image-20230214093657-2.png||height="333" width="858"]]
352 352  
353 -=== **3.4.3 Network ~-~-> Firewall** ===
354 354  
459 +=== 3.4.4 Network ~-~-> Cellular ===
355 355  
356 -[[image:image-20220616115351-6.png||height="244" width="661"]]
357 357  
462 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
358 358  
464 +(% style="color:red" %)**Note: APN cannot be empty.**
359 359  
360 -== **3.5 System** ==
466 +[[image:image-20230228115126-1.png]]
361 361  
362 362  
363 -=== **3.5.1  System ~-~-> System Overview** ===
469 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
364 364  
471 +[[image:image-20230228115535-2.png||height="478" width="888"]]
365 365  
473 +
474 +== 3.5 System ==
475 +
476 +=== 3.5.1 System ~-~-> System Overview ===
477 +
478 +
366 366  Shows the system info:
367 367  
368 368  [[image:image-20220917144512-5.png||height="618" width="853"]]
369 369  
370 370  
484 +=== 3.5.2 System ~-~-> System General ===
371 371  
372 -=== **3.5.2 System ~-~-> Backup/Restore** ===
373 373  
487 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
374 374  
489 +In addition, Users can customize the FallBack IP address.
490 +
491 +[[image:image-20230214094058-3.png]]
492 +
493 +
494 +=== 3.5.3 System ~-~-> Backup/Restore ===
495 +
496 +
375 375  [[image:image-20220917144725-6.png||height="208" width="869"]]
376 376  
377 377  
500 +=== 3.5.4 System ~-~-> Remoteit ===
378 378  
379 -= **4. Build-in Server** =
380 380  
503 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
381 381  
505 +
506 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
507 +
508 +[[image:image-20221230092303-2.png]]
509 +
510 +
511 +=== 3.5.5 System ~-~-> Package Management ===
512 +
513 +
514 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
515 +
516 +[[image:image-20230214094316-4.png]]
517 +
518 +
519 += 4. Build-in Server =
520 +
521 +
382 382  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
383 383  
384 384  
385 -[[image:image-20220820115644-1.png||height="217" width="778"]]
525 +[[image:image-20230214095318-5.png||height="347" width="980"]]
386 386  
387 387  
388 388  (% style="color:red" %)**Note:**
... ... @@ -400,10 +400,9 @@
400 400   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
401 401  
402 402  
543 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
403 403  
404 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
405 405  
406 -
407 407  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
408 408  
409 409  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -419,10 +419,19 @@
419 419  [[image:image-20220725171719-1.png||height="570" width="769"]]
420 420  
421 421  
561 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
422 422  
423 -== **4.2 Application Server ~-~- Node-Red** ==
424 424  
564 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
425 425  
566 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
567 +
568 +[[image:image-20230321092456-1.png]]
569 +
570 +
571 +== 4.2 Application Server ~-~- Node-Red ==
572 +
573 +
426 426  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
427 427  
428 428  
... ... @@ -433,16 +433,104 @@
433 433  
434 434  
435 435  
436 -= **5. How users can access LPS8v2 using serial USB** =
584 +=== **Using Node-Red, InfluxDB and Grafana** ===
437 437  
586 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
438 438  
439 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
440 440  
589 +the users can refer to this link to install them.
441 441  
442 -Port 1 of the UART on the LPS8v2 is GND
591 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
443 443  
593 +
594 +=== **Upgrade the node.js** ===
595 +
596 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
597 +
598 +
599 +the users can refer to this link to upgrade them.
600 +
601 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
602 +
603 +
604 +== 4.3 How to disable the built-in server ==
605 +
606 +
607 +Use the following commands to start and stop the TTNv3 service:
608 +
444 444  (% class="box infomessage" %)
445 445  (((
611 +**# start**
612 +systemctl start ttnstack
613 +
614 +**# stop**
615 +systemctl stop ttnstack
616 +
617 +**# enable**
618 +systemctl enable ttnstack
619 +
620 +**#disable**
621 +systemctl disable ttnstack
622 +)))
623 +
624 +Use the following commands to start and stop the Node-Red service:
625 +
626 +(% class="box infomessage" %)
627 +(((
628 +**# start**
629 +systemctl start nodered
630 +
631 +**# stop**
632 +systemctl stop nodered
633 +
634 +**# enable**
635 +systemctl enable nodered
636 +
637 +**#disable**
638 +systemctl disable nodered
639 +)))
640 +
641 +
642 +== 4.4 How to use ChirpStack on LPS8-V2 ==
643 +
644 +
645 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
646 +
647 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
648 +
649 +
650 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
651 +
652 +
653 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
654 +
655 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
656 +
657 +[[image:image-20230602140406-3.png||height="480" width="918"]]
658 +
659 +
660 +When the configuration is complete, click** "Save&Apply"**.
661 +
662 +
663 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
664 +
665 +[[image:image-20230602143122-4.png||height="511" width="983"]]
666 +
667 +
668 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
669 +
670 +
671 +
672 += 6. How users can access LPS8-V2 using serial USB =
673 +
674 +
675 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
676 +
677 +
678 +Port 1 of the UART on the LPS8-V2 is GND
679 +
680 +(% class="box infomessage" %)
681 +(((
446 446  **TXD  <~-~--> UART RXD (Gray line)**
447 447  
448 448  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -453,10 +453,9 @@
453 453  
454 454  **LPS8v2 UART connection photo**
455 455  
456 -[[image:image-20220804163015-1.png||height="621" width="466"]]
457 457  
693 +[[image:image-20230421094319-2.png||height="351" width="392"]]
458 458  
459 -
460 460  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
461 461  
462 462  
... ... @@ -466,10 +466,9 @@
466 466  [[image:image-20220804164747-2.png||height="622" width="594"]]
467 467  
468 468  
704 += 7. Use the helium gateway-rs as the Data-only Hotspot =
469 469  
470 -= **6. Use the helium gateway-rs as the Data-only Hotspot** =
471 471  
472 -
473 473  == **Step 1: Configure Frequency Band** ==
474 474  
475 475  
... ... @@ -495,59 +495,72 @@
495 495  
496 496  **Access the gateway CLI via SSH.**
497 497  
498 -[[image:image-20220905165222-3.png]]
732 +[[image:image-20230425153417-2.png]]
499 499  
500 500  
501 -**Download gateway-rs.**
735 +**Install the new gateway-rs**
502 502  
503 -[[image:image-20220905165715-5.png]]
504 -
505 505  (% class="box infomessage" %)
506 506  (((
507 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
739 +**apt update && apt install helium-gateway**
508 508  )))
509 509  
742 +[[image:image-20230425154058-4.png]]
510 510  
511 -**Install gateway-rs.**
512 512  
513 -[[image:image-20220905165917-7.png]]
514 514  
746 +Option: If you installed the older gateway-rs, you have clean it
747 +
515 515  (% class="box infomessage" %)
516 516  (((
517 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
750 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
518 518  )))
519 519  
753 +[[image:image-20230425153823-3.png]]
520 520  
521 -**Modify configuration.**
522 522  
756 +**Change the region setting:**
523 523  
524 -[[image:image-20220905173847-12.png]]
525 525  
759 +(% class="box infomessage" %)
760 +(((
761 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
526 526  
763 +
764 +**e.g: **
765 +
766 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
767 +
768 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
769 +)))
770 +
771 +
772 +**Restart the gateway-rs**
773 +
527 527  (% class="box infomessage" %)
528 528  (((
529 -**region=<Enter regional parameters> \
530 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
531 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
776 +**systemctl restart helium_gateway**
532 532  )))
533 533  
779 +[[image:image-20230425155612-7.png||height="265" width="911"]]
534 534  
535 -**Restart the helium_gateway**
536 536  
537 -[[image:image-20220905170920-9.png]]
538 538  
783 +**Check the helium_gateway running status**
539 539  
785 +
540 540  (% class="box infomessage" %)
541 541  (((
542 -**systemctl restart helium_gateway**
788 +**systemctl status helium_gateway**
543 543  )))
544 544  
545 545  
546 -**Check the helium_gateway Log：**
792 +[[image:image-20230425154740-5.png]]
547 547  
548 -[[image:image-20220905173952-13.png]]
549 549  
550 550  
796 +**Check the helium_gateway Log：**
797 +
551 551  (% class="box infomessage" %)
552 552  (((
553 553  **journalctl -u helium_gateway -f**
... ... @@ -554,23 +554,61 @@
554 554  )))
555 555  
556 556  
557 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
804 +[[image:image-20230425155659-8.png]]
558 558  
559 -where the helium gateway log is shown:
560 560  
561 -[[image:image-20220905174534-14.png]]
807 += 8. OTA System Update =
562 562  
563 563  
564 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
810 +LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
565 565  
566 566  
813 += 9. FAQ =
567 567  
568 -= **7. Trouble Shooting** =
815 +== 9.1 How to change Hostname ==
569 569  
570 570  
571 -== 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
818 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
572 572  
820 +(% class="box infomessage" %)
821 +(((
822 +hostnamectl set-hostname dragino-123456
823 +)))
573 573  
825 +[[image:image-20230517102429-1.png]]
826 +
827 +After the configuration is complete, run "reboot" to restart the gateway.
828 +
829 +
830 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
831 +
832 +
833 +Migrate guide:
834 +
835 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
836 +
837 +2. Download migrate script and run it.
838 +
839 +(% class="box infomessage" %)
840 +(((
841 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
842 +)))
843 +
844 +[[image:image-20230602135658-1.png||height="545" width="986"]]
845 +
846 +
847 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
848 +
849 +[[image:image-20230602135825-2.png||height="356" width="855"]]
850 +
851 +The default account for chirpstack is: **admin/admin**
852 +
853 +
854 += 10. Trouble Shooting =
855 +
856 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
857 +
858 +
574 574  [[image:image-20220920135918-1.png]]
575 575  
576 576  
... ... @@ -586,23 +586,59 @@
586 586  [[image:image-20220920141936-2.png]]
587 587  
588 588  
874 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
589 589  
590 590  
591 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
877 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
592 592  
879 +[[image:image-20230508171607-1.png]]
593 593  
881 +
882 +== 10.3  Fallback IP does not work, how can users check ==
883 +
884 +
885 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
886 +
887 +
888 +**1.Check whether the configuration is correct**
889 +
890 +Run the CMD command to ipconfig and ping 172.31.255.254.
891 +
892 +If this fails, the user needs to reconfigure.
893 +
894 +[[image:image-20230413170224-3.png||height="433" width="707"]]
895 +
896 +[[image:image-20230413170246-4.png]]
897 +
898 +
899 +**2. Check whether the firewall is disabled**
900 +
901 +If the firewall is not down, this will affect access to the gateway.
902 +
903 +
904 +== 10.4  Click "Manual_Update", why there is no response? ==
905 +
906 +
907 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
908 +
909 +
910 +[[image:image-20230527090555-3.png||height="660" width="832"]]
911 +
912 +
913 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
914 +
915 +
594 594  (((
595 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
917 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
596 596  )))
597 597  
598 598  (((
599 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
921 +With your question as detailed as possible. We will reply and help you in the shortest.
600 600  
601 601  
924 += 12. Reference =
602 602  
603 -= **9. Reference** =
604 604  
605 -
606 606  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
607 607  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
608 608  
... ... @@ -610,7 +610,7 @@
610 610  
611 611  )))
612 612  
613 -= **10. Order Info** =
934 += 13. Order Info =
614 614  
615 615  
616 616  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -634,10 +634,9 @@
634 634  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
635 635  
636 636  
958 += 14. Manufacturer Info =
637 637  
638 -= **10. Manufacturer Info** =
639 639  
640 -
641 641  **Shenzhen Dragino Technology Development co. LTD**
642 642  
643 643  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -645,10 +645,9 @@
645 645  LongCheng Street, LongGang District ; Shenzhen 518116,China
646 646  
647 647  
968 += 15. FCC Warning =
648 648  
649 -= **11. FCC Warning** =
650 650  
651 -
652 652  (((
653 653  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
654 654  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0