Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 112.1 >
edited by Xiaoye
on 2022/09/20 14:20
To version < 222.1 >
edited by Kilight Cao
on 2023/06/16 17:55
>
Change comment: Uploaded new attachment "image-20230616175558-7.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -16,23 +16,22 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  )))
29 29  
30 30  (((
31 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  )))
33 33  
34 34  (((
35 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,14 +40,13 @@
40 40  )))
41 41  
42 42  (((
43 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -59,17 +59,20 @@
59 59  * 10M/100M RJ45 Ports x 1
60 60  * Multi-Channel LoRaWAN Wireless
61 61  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 -== **1.3 Features** ==
71 71  
71 +== 1.3 Features ==
72 72  
73 +
73 73  * Open Source Debian system
74 74  * Managed by Web GUI, SSH via WAN or WiFi
75 75  * Remote Management
... ... @@ -82,73 +82,81 @@
82 82  ** Semtech UDP Packet Forwarder
83 83  ** LoRaWAN Basic Station
84 84  ** ChirpStack-Gateway-Bridge (MQTT)
85 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
86 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
86 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
87 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
87 87  
88 88  
89 -== **1.4 Block Diagram** ==
90 90  
91 +== 1.4 LED Indicators ==
91 91  
92 92  
93 -== **1.5 LED Indicators** ==
94 -
95 -
96 96  LPS8-V2 has totally four LEDs, They are:
97 97  
98 98  
99 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
97 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
100 100  
101 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
99 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
102 102  
103 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
101 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
104 104  
105 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
103 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
106 106  
107 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
105 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
108 108  
109 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
107 + ✓** SOLID RED:** Device doesn't have an Internet connection.
110 110  
111 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
109 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
112 112  
113 113  
112 +== 1.5 Button Intruction ==
114 114  
115 -== **1.6 Button Intruction** ==
116 116  
117 -
118 118  LPS8-V2 has a black toggle button, which is:
119 119  
120 120  
121 121  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
122 122  
123 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
124 124  
125 125  
126 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
123 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
127 127  
128 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
125 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
129 129  
130 130  
128 += 2. Quick Start =
131 131  
132 -= **2. Quick Start** =
133 133  
134 -
135 135  The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136 136  
137 137  In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
138 138  
139 139  
136 +== 2.1 Connects to the network and accesses the gateway Web UI ==
140 140  
141 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
138 +=== 2.1.1 connect the network ===
142 142  
143 143  
144 -== **2.1.1 connect the network.** ==
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
145 145  
146 146  
147 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
144 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
148 148  
146 +(% style="background-color:yellow" %)**dragino+dragino**
149 149  
148 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
149 +
150 +[[image:image-20230527084515-1.png]]
151 +
152 +[[image:image-20230527085250-2.png||height="495" width="284"]]
153 +
154 +
155 +
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
157 +
158 +
150 150  (((
151 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
160 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
152 152  )))
153 153  
154 154  (((
... ... @@ -159,34 +159,43 @@
159 159  
160 160  
161 161  
162 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
171 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
163 163  
164 164  
165 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
174 +[[image:image-20230107084650-2.png||height="310" width="839"]]
166 166  
167 167  
168 -(((
169 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
170 -)))
177 +(% style="color:blue" %)**Steps to connect via fallback IP:**
171 171  
179 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
172 172  
181 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
173 173  
174 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
175 175  
176 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
184 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
177 177  
178 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
179 179  
187 +As in the below photo:
180 180  
181 -[[image:image-20220622101433-4.png]]
189 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
182 182  
183 183  
184 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
192 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
185 185  
194 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
186 186  
187 -[[image:image-20220622102210-5.png||height="504" width="919"]]
188 188  
197 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
189 189  
199 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
200 +
201 +
202 +
203 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
204 +
205 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
206 +
207 +
190 190  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
191 191  
192 192  
... ... @@ -203,13 +203,106 @@
203 203  [[image:image-20220622102901-8.png||height="476" width="938"]]
204 204  
205 205  
224 +=== 2.1.2 Access Configure Web UI ===
206 206  
207 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
208 208  
227 +**Web Interface**
209 209  
210 -=== **2.2.1 Select your area frequency** ===
229 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
211 211  
212 212  
232 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
233 +
234 +You will see the login interface of LPS8-V2 as shown below.
235 +
236 +The account details for Web Login are:
237 +
238 +(% style="color:blue" %)**User Name: root**
239 +
240 +(% style="color:blue" %)**Password:   dragino**
241 +
242 +[[image:image-20230106153501-1.png||height="367" width="894"]]
243 +
244 +
245 +== 2.2  Typical Network Setup ==
246 +
247 +=== 2.2.1  Overview ===
248 +
249 +
250 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
251 +
252 +* **WAN Port Internet Mode**
253 +
254 +* **WiFi Client Mode**
255 +
256 +* **Cellular Mode**
257 +
258 +
259 +
260 +=== 2.2.2  Use WAN port to access Internet ===
261 +
262 +
263 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
264 +
265 +
266 +[[image:image-20230411100633-2.png||height="501" width="935"]]
267 +
268 +
269 +=== 2.2.3  Access the Internet as a WiFi Client ===
270 +
271 +
272 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
273 +
274 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
275 +
276 +[[image:image-20230411095739-1.png||height="264" width="691"]]
277 +
278 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
279 +
280 +
281 +=== 2.2.4  Use built-in 4G modem for internet access ===
282 +
283 +
284 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
285 +
286 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
287 +
288 +
289 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
290 +
291 +First, install the Micro SIM card as below direction
292 +
293 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
294 +
295 +
296 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
297 +
298 +
299 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
300 +
301 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
302 +
303 +
304 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
305 +
306 +
307 +=== 2.2.5  Check Internet connection ===
308 +
309 +
310 +In the **home** page, we can check the Internet connection.
311 +
312 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
313 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
314 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
315 +
316 +[[image:image-20230411101534-3.png||height="544" width="942"]]
317 +
318 +
319 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
320 +
321 +=== 2.3.1 Select your area frequency ===
322 +
323 +
213 213  (((
214 214  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
215 215  
... ... @@ -219,10 +219,9 @@
219 219  [[image:image-20220622103332-9.png||height="485" width="938"]]
220 220  
221 221  
333 +=== 2.3.2 Get the only gateway EUI ===
222 222  
223 -=== **2.2.2 Get the only gateway EUI** ===
224 224  
225 -
226 226  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
227 227  
228 228  
... ... @@ -244,10 +244,9 @@
244 244  [[image:image-20220622103956-12.png]]
245 245  
246 246  
357 +=== 2.3.3 Register the gateway to The Things Network ===
247 247  
248 -== **2.2.3 Register the gateway to The Things Network** ==
249 249  
250 -
251 251  **Login to The Things Network**
252 252  
253 253  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -261,34 +261,30 @@
261 261  **Get it online**
262 262  
263 263  
373 += 3. Web Configure Pages =
264 264  
265 -= **3. Web Configure Pages** =
375 +== 3.1 Home ==
266 266  
267 267  
268 -== **3.1 Home** ==
378 +Shows the system running status:
269 269  
270 -
271 -//Shows the system running status~://
272 -
273 273  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
274 274  
275 275  
383 +== 3.2 LoRa Settings ==
276 276  
277 -== **3.2 LoRa Settings** ==
385 +=== 3.2.1 LoRa ~-~-> LoRa ===
278 278  
279 279  
280 -=== **3.2.1 LoRa ~-~-> LoRa** ===
388 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
281 281  
390 +Different LPS8v2 hardware versions can support different frequency ranges:
282 282  
283 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
392 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
393 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
284 284  
285 -//Different LPS8v2 hardware versions can support different frequency ranges~://
286 -
287 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
288 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
289 -
290 290  (% class="wikigeneratedid" %)
291 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
396 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
292 292  
293 293  
294 294  (% class="wikigeneratedid" %)
... ... @@ -300,26 +300,23 @@
300 300  )))
301 301  
302 302  
408 +== 3.3 LoRaWAN Settings ==
303 303  
304 -== **3.3 LoRaWAN Settings** ==
410 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
305 305  
306 306  
307 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
413 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
308 308  
309 309  
310 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
311 -
312 -
313 313  [[image:image-20220616111932-2.png||height="516" width="672"]]
314 314  
315 315  
419 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
316 316  
317 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
318 318  
422 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
319 319  
320 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
321 321  
322 -
323 323  [[image:image-20220616113246-3.png||height="396" width="672"]]
324 324  
325 325  
... ... @@ -328,57 +328,95 @@
328 328  )))
329 329  
330 330  
433 +== 3.4 Network Settings ==
331 331  
332 -== **3.4 Network Settings** ==
435 +=== 3.4.1 Network ~-~-> WiFi ===
333 333  
334 334  
335 -=== **3.4.1 Network ~-~-> WiFi** ===
438 +[[image:image-20220616114756-4.png||height="251" width="669"]]
336 336  
337 337  
338 -[[image:image-20220616114756-4.png||height="251" width="669"]]
441 +=== 3.4.2 Network ~-~-> System Status ===
339 339  
340 340  
444 +[[image:image-20220820134112-2.png||height="539" width="668"]]
341 341  
342 -=== **3.4.2 Network ~-~-> System Status** ===
343 343  
447 +=== 3.4.3 Network ~-~-> Network ===
344 344  
345 -[[image:image-20220820134112-2.png||height="539" width="668"]]
346 346  
450 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
347 347  
452 +[[image:image-20230214093657-2.png||height="333" width="858"]]
348 348  
349 -=== **3.4.3 Network ~-~-> Firewall** ===
350 350  
455 +=== 3.4.4 Network ~-~-> Cellular ===
351 351  
352 -[[image:image-20220616115351-6.png||height="244" width="661"]]
353 353  
458 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
354 354  
460 +(% style="color:red" %)**Note: APN cannot be empty.**
355 355  
356 -== **3.5 System** ==
462 +[[image:image-20230228115126-1.png]]
357 357  
358 358  
359 -=== **3.5.1  System ~-~-> System Overview** ===
465 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
360 360  
467 +[[image:image-20230228115535-2.png||height="478" width="888"]]
361 361  
469 +
470 +== 3.5 System ==
471 +
472 +=== 3.5.1 System ~-~-> System Overview ===
473 +
474 +
362 362  Shows the system info:
363 363  
364 364  [[image:image-20220917144512-5.png||height="618" width="853"]]
365 365  
366 366  
480 +=== 3.5.2 System ~-~-> System General ===
367 367  
368 -=== **3.5.2 System ~-~-> Backup/Restore** ===
369 369  
483 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
370 370  
485 +In addition, Users can customize the FallBack IP address.
486 +
487 +[[image:image-20230214094058-3.png]]
488 +
489 +
490 +=== 3.5.3 System ~-~-> Backup/Restore ===
491 +
492 +
371 371  [[image:image-20220917144725-6.png||height="208" width="869"]]
372 372  
373 373  
496 +=== 3.5.4 System ~-~-> Remoteit ===
374 374  
375 -= **4. Build-in Server** =
376 376  
499 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
377 377  
501 +
502 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
503 +
504 +[[image:image-20221230092303-2.png]]
505 +
506 +
507 +=== 3.5.5 System ~-~-> Package Management ===
508 +
509 +
510 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
511 +
512 +[[image:image-20230214094316-4.png]]
513 +
514 +
515 += 4. Build-in Server =
516 +
517 +
378 378  The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
379 379  
380 380  
381 -[[image:image-20220820115644-1.png||height="217" width="778"]]
521 +[[image:image-20230214095318-5.png||height="347" width="980"]]
382 382  
383 383  
384 384  (% style="color:red" %)**Note:**
... ... @@ -396,10 +396,9 @@
396 396   For the Node-Red, you can use the local IP address and the port is 1880 to access it.
397 397  
398 398  
539 +== 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
399 399  
400 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
401 401  
402 -
403 403  You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
404 404  
405 405  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
... ... @@ -415,10 +415,19 @@
415 415  [[image:image-20220725171719-1.png||height="570" width="769"]]
416 416  
417 417  
557 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
418 418  
419 -== **4.2 Application Server ~-~- Node-Red** ==
420 420  
560 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
421 421  
562 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
563 +
564 +[[image:image-20230321092456-1.png]]
565 +
566 +
567 +== 4.2 Application Server ~-~- Node-Red ==
568 +
569 +
422 422  You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
423 423  
424 424  
... ... @@ -429,16 +429,104 @@
429 429  
430 430  
431 431  
432 -= **5. How users can access LPS8v2 using serial USB** =
580 +=== **Using Node-Red, InfluxDB and Grafana** ===
433 433  
582 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
434 434  
435 -(% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
436 436  
585 +the users can refer to this link to install them.
437 437  
438 -Port 1 of the UART on the LPS8v2 is GND
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
439 439  
589 +
590 +=== **Upgrade the node.js** ===
591 +
592 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
593 +
594 +
595 +the users can refer to this link to upgrade them.
596 +
597 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
598 +
599 +
600 +== 4.3 How to disable the built-in server ==
601 +
602 +
603 +Use the following commands to start and stop the TTNv3 service:
604 +
440 440  (% class="box infomessage" %)
441 441  (((
607 +**# start**
608 +systemctl start ttnstack
609 +
610 +**# stop**
611 +systemctl stop ttnstack
612 +
613 +**# enable**
614 +systemctl enable ttnstack
615 +
616 +**#disable**
617 +systemctl disable ttnstack
618 +)))
619 +
620 +Use the following commands to start and stop the Node-Red service:
621 +
622 +(% class="box infomessage" %)
623 +(((
624 +**# start**
625 +systemctl start nodered
626 +
627 +**# stop**
628 +systemctl stop nodered
629 +
630 +**# enable**
631 +systemctl enable nodered
632 +
633 +**#disable**
634 +systemctl disable nodered
635 +)))
636 +
637 +
638 +== 4.4 How to use ChirpStack on LPS8-V2 ==
639 +
640 +
641 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
642 +
643 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
644 +
645 +
646 +=== 4.4.1 How do users choose the chirpstack server frequency Sub Band ===
647 +
648 +
649 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
650 +
651 +If the frequency Plan used is CN470, US915, AU915, AS923, the user needs to choose a frequency sub band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
652 +
653 +[[image:image-20230602140406-3.png||height="480" width="918"]]
654 +
655 +
656 +When the configuration is complete, click** "Save&Apply"**.
657 +
658 +
659 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
660 +
661 +[[image:image-20230602143122-4.png||height="511" width="983"]]
662 +
663 +
664 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
665 +
666 +
667 +
668 += 6. How users can access LPS8-V2 using serial USB =
669 +
670 +
671 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
672 +
673 +
674 +Port 1 of the UART on the LPS8-V2 is GND
675 +
676 +(% class="box infomessage" %)
677 +(((
442 442  **TXD  <~-~--> UART RXD (Gray line)**
443 443  
444 444  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -449,10 +449,9 @@
449 449  
450 450  **LPS8v2 UART connection photo**
451 451  
452 -[[image:image-20220804163015-1.png||height="621" width="466"]]
453 453  
689 +[[image:image-20230421094319-2.png||height="351" width="392"]]
454 454  
455 -
456 456  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
457 457  
458 458  
... ... @@ -462,10 +462,9 @@
462 462  [[image:image-20220804164747-2.png||height="622" width="594"]]
463 463  
464 464  
700 += 7. Use the helium gateway-rs as the Data-only Hotspot =
465 465  
466 -= **6. Use the helium gateway-rs as the Data-only Hotspot** =
467 467  
468 -
469 469  == **Step 1: Configure Frequency Band** ==
470 470  
471 471  
... ... @@ -491,59 +491,72 @@
491 491  
492 492  **Access the gateway CLI via SSH.**
493 493  
494 -[[image:image-20220905165222-3.png]]
728 +[[image:image-20230425153417-2.png]]
495 495  
496 496  
497 -**Download gateway-rs.**
731 +**Install the new gateway-rs**
498 498  
499 -[[image:image-20220905165715-5.png]]
500 -
501 501  (% class="box infomessage" %)
502 502  (((
503 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
735 +**apt update && apt install helium-gateway**
504 504  )))
505 505  
738 +[[image:image-20230425154058-4.png]]
506 506  
507 -**Install gateway-rs.**
508 508  
509 -[[image:image-20220905165917-7.png]]
510 510  
742 +Option: If you installed the older gateway-rs, you have clean it
743 +
511 511  (% class="box infomessage" %)
512 512  (((
513 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
746 +**apt remove helium_gateway && dpkg ~-~-purge helium_gateway**
514 514  )))
515 515  
749 +[[image:image-20230425153823-3.png]]
516 516  
517 -**Modify configuration.**
518 518  
752 +**Change the region setting:**
519 519  
520 -[[image:image-20220905173847-12.png]]
521 521  
755 +(% class="box infomessage" %)
756 +(((
757 +**sed  -i '27cregion\ \= \ <REGION>' /etc/helium_gateway/settings.toml**
522 522  
759 +
760 +**e.g: **
761 +
762 +**US915  ~-~-->  sed -i '27cregion\ \= \ \"US915\"' /etc/helium_gateway/settings.toml**
763 +
764 +**EU868  ~-~-->  sed -i '27cregion\ \= ~\~\" EU868\"' /etc/helium_gateway/settings.toml**
765 +)))
766 +
767 +
768 +**Restart the gateway-rs**
769 +
523 523  (% class="box infomessage" %)
524 524  (((
525 -**region=<Enter regional parameters> \
526 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
527 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
772 +**systemctl restart helium_gateway**
528 528  )))
529 529  
775 +[[image:image-20230425155612-7.png||height="265" width="911"]]
530 530  
531 -**Restart the helium_gateway**
532 532  
533 -[[image:image-20220905170920-9.png]]
534 534  
779 +**Check the helium_gateway running status**
535 535  
781 +
536 536  (% class="box infomessage" %)
537 537  (((
538 -**systemctl restart helium_gateway**
784 +**systemctl status helium_gateway**
539 539  )))
540 540  
541 541  
542 -**Check the helium_gateway Log：**
788 +[[image:image-20230425154740-5.png]]
543 543  
544 -[[image:image-20220905173952-13.png]]
545 545  
546 546  
792 +**Check the helium_gateway Log：**
793 +
547 547  (% class="box infomessage" %)
548 548  (((
549 549  **journalctl -u helium_gateway -f**
... ... @@ -550,25 +550,97 @@
550 550  )))
551 551  
552 552  
553 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
800 +[[image:image-20230425155659-8.png]]
554 554  
555 -where the helium gateway log is shown:
556 556  
557 -[[image:image-20220905174534-14.png]]
803 += 8. OTA System Update =
558 558  
559 559  
560 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
806 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
561 561  
562 562  
809 +== 8.1 Auto-update method ==
563 563  
564 -= **7. Trouble Shooting** =
565 565  
812 +The default, each gateway will enable the auto-update function.
566 566  
567 -== 1). I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
814 +this function will be triggered every boot and every midnight.
568 568  
569 569  
570 -[[image:http://mail.dragino.cc/preview/img/preview?token=7418ee4297c5455689d1d7bae44a465e&rule=1l.png]][[image:image-20220920135918-1.png]]
817 +Users can enable/disable it via Web Page
571 571  
819 +[[image:image-20230607094447-2.png]]
820 +
821 +
822 +== 8.2 Manual upgrade method ==
823 +
824 +
825 +1). Using the Linux command to upgrade the system
826 +
827 +
828 +(% class="box infomessage" %)
829 +(((
830 +**apt update && apt install *dragino***
831 +)))
832 +
833 +
834 +2). Upgrade the system via the Web page button of "Manual Update"
835 +
836 +
837 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
838 +
839 +[[image:image-20230607093849-1.png]]
840 +
841 +
842 += 9. FAQ =
843 +
844 +== 9.1 How to change Hostname ==
845 +
846 +
847 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
848 +
849 +(% class="box infomessage" %)
850 +(((
851 +hostnamectl set-hostname dragino-123456
852 +)))
853 +
854 +[[image:image-20230517102429-1.png]]
855 +
856 +After the configuration is complete, run "reboot" to restart the gateway.
857 +
858 +
859 +== 9.2 Build-in The Things Network migrate to ChirpStack ==
860 +
861 +
862 +Migrate guide:
863 +
864 +1. Ensure that the gateway is in good network condition, Recommended use of ETH.
865 +
866 +2. Download migrate script and run it.
867 +
868 +(% class="box infomessage" %)
869 +(((
870 +wget -P /tmp [[http:~~/~~/repo.dragino.com/release/tool/chirpstack/migrate_chirpstack>>url:http://repo.dragino.com/release/tool/chirpstack/migrate_chirpstack]] && chmod +x /tmp/migrate_chirpstack && /tmp/migrate_chirpstack
871 +)))
872 +
873 +[[image:image-20230602135658-1.png||height="545" width="986"]]
874 +
875 +
876 +3. Wait for the script to complete，Enable the Chirpstack on Web UI
877 +
878 +[[image:image-20230602135825-2.png||height="356" width="855"]]
879 +
880 +The default account for chirpstack is: **admin/admin**
881 +
882 +
883 += 10. Trouble Shooting =
884 +
885 +== 10.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
886 +
887 +
888 +[[image:image-20220920135918-1.png]]
889 +
890 +
572 572  This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
573 573  
574 574  By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
... ... @@ -581,30 +581,67 @@
581 581  [[image:image-20220920141936-2.png]]
582 582  
583 583  
903 +== 10.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
584 584  
585 585  
586 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
906 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
587 587  
908 +[[image:image-20230508171607-1.png]]
588 588  
910 +
911 +== 10.3  Fallback IP does not work, how can users check ==
912 +
913 +
914 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
915 +
916 +
917 +**1.Check whether the configuration is correct**
918 +
919 +Run the CMD command to ipconfig and ping 172.31.255.254.
920 +
921 +If this fails, the user needs to reconfigure.
922 +
923 +[[image:image-20230413170224-3.png||height="433" width="707"]]
924 +
925 +[[image:image-20230413170246-4.png]]
926 +
927 +
928 +**2. Check whether the firewall is disabled**
929 +
930 +If the firewall is not down, this will affect access to the gateway.
931 +
932 +
933 +== 10.4  Click "Manual_Update", why there is no response? ==
934 +
935 +
936 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
937 +
938 +
939 +[[image:image-20230527090555-3.png||height="660" width="832"]]
940 +
941 +
942 += (% style="color:inherit; font-family:inherit; font-size:29px" %)11. Supports(%%) =
943 +
944 +
589 589  (((
590 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
946 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
591 591  )))
592 592  
593 593  (((
594 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
950 +With your question as detailed as possible. We will reply and help you in the shortest.
595 595  
596 596  
953 += 12. Reference =
597 597  
598 -= **9. Reference** =
599 599  
600 -
601 601  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
602 602  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
603 603  
959 +
604 604  
605 605  )))
606 606  
607 -= **10. Order Info** =
963 += 13. Order Info =
608 608  
609 609  
610 610  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -612,26 +612,33 @@
612 612  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
613 613  
614 614  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
971 +
615 615  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
973 +
616 616  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
975 +
617 617  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
977 +
618 618  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
979 +
619 619  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
620 620  
621 621  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
622 622  
623 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
624 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
625 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
626 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
984 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
627 627  
628 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
986 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
629 629  
988 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
630 630  
990 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
631 631  
632 -= **10. Manufacturer Info** =
992 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
633 633  
634 634  
995 += 14. Manufacturer Info =
996 +
997 +
635 635  **Shenzhen Dragino Technology Development co. LTD**
636 636  
637 637  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -639,10 +639,9 @@
639 639  LongCheng Street, LongGang District ; Shenzhen 518116,China
640 640  
641 641  
1005 += 15. FCC Warning =
642 642  
643 -= **11. FCC Warning** =
644 644  
645 -
646 646  (((
647 647  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
648 648  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0