Last modified by Kilight Cao on 2024/12/31 16:31
<
From version < 108.1 >
edited by Xiaoling
on 2022/09/17 14:45
To version < 237.1 >
edited by Xiaoye
on 2023/07/25 16:25
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -16,23 +16,22 @@
16 16  
17 17  
18 18  
19 -= **1. Introduction** =
19 += 1. Introduction =
20 20  
21 +== 1.1 What is LPS8v2 ==
21 21  
22 -== **1.1 What is LPS8v2** ==
23 23  
24 -
25 25  (((
26 26  (((
27 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The LPS8v2 is an (% style="color:blue" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:blue" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
28 28  )))
29 29  
30 30  (((
31 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:blue" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
32 32  )))
33 33  
34 34  (((
35 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +LPS8v2 also includes a (% style="color:blue" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,14 +40,13 @@
40 40  )))
41 41  
42 42  (((
43 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +LPS8v2 supports (% style="color:blue" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
44 44  )))
45 45  
46 46  
46 +== 1.2 Specifications ==
47 47  
48 -== **1.2 Specifications** ==
49 49  
50 -
51 51  (% style="color:#037691" %)**Hardware System:**
52 52  
53 53  * CPU: Quad-core Cortex-A7 1.2Ghz
... ... @@ -59,19 +59,19 @@
59 59  * 10M/100M RJ45 Ports x 1
60 60  * Multi-Channel LoRaWAN Wireless
61 61  * WiFi 802.11 b/g/n
60 +* Sensitivity: -140dBm
61 +* Max Output Power: 27dBm
62 62  
63 63  (% style="color:#037691" %)**Operating Condition:**
64 64  
65 -* Work Temperature: -20 ~~ 65°C
66 -* Storage Temperature: -20 ~~ 65°C
65 +* Work Temperature: -20 ~~ 70°C
66 +* Storage Temperature: -20 ~~ 70°C
67 67  * Power Input: 5V, 2A, DC
68 68  
69 69  
70 +== 1.3 Features ==
70 70  
71 71  
72 -== **1.3 Features** ==
73 -
74 -
75 75  * Open Source Debian system
76 76  * Managed by Web GUI, SSH via WAN or WiFi
77 77  * Remote Management
... ... @@ -84,75 +84,80 @@
84 84  ** Semtech UDP Packet Forwarder
85 85  ** LoRaWAN Basic Station
86 86  ** ChirpStack-Gateway-Bridge (MQTT)
87 -* Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
88 -* Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
85 +* Built-in (% style="color:#037691" %)**The Things Network**(%%) local LoRaWAN server
86 +* Built-in  (% style="color:#037691" %)**Node-Red** (%%)local Application server
89 89  
90 90  
89 +== 1.4 LED Indicators ==
91 91  
92 92  
93 -== **1.4 Block Diagram** ==
92 +LPS8-V2 has totally four LEDs, They are:
94 94  
95 95  
95 +(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
96 96  
97 -== **1.5 LED Indicators** ==
97 +(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
98 98  
99 +(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
99 99  
100 -LPS8-V2 has totally four LEDs, They are:
101 + ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
101 101  
103 + ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
102 102  
103 -(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
105 + ✓** SOLID RED:** Device doesn't have an Internet connection.
104 104  
105 -(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
107 +(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
106 106  
107 -(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
108 108  
109 -// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
110 +== 1.5 Button Intruction ==
110 110  
111 -// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
112 112  
113 -// ✓** SOLID RED:** Device doesn't have an Internet connection.//
113 +LPS8-V2 has a black toggle button, which is:
114 114  
115 -(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
116 116  
116 +(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117 117  
118 + // // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.
118 118  
119 -== **1.6 Button Intruction** ==
120 120  
121 +(% style="color:blue" %)**➢ Long press more than 10s:**(%%)**    **the gateway will restore the factory settings.
121 121  
122 -LPS8-V2 has a black toggle button, which is:
123 + **LED status: ** ETH LED will SOLID BULE Until the restore is finished.
123 123  
124 124  
125 -(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
126 += 2. Quick Start =
126 126  
127 - // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
128 128  
129 +The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
129 129  
130 -(% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
131 +In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
131 131  
132 - //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
133 133  
134 +== 2.1 Access and Configure LPS8-V2 ==
134 134  
136 +=== 2.1.1 Find IP address of LPS8-V2 ===
135 135  
136 -= **2. Quick Start** =
137 137  
139 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via LPS8-V2 WiFi ====
138 138  
139 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
140 140  
141 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
142 +Since software version **230524**,At the first boot of LPS8-V2, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
142 142  
144 +(% style="background-color:yellow" %)**dragino+dragino**
143 143  
146 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8-V2 has the default IP (% style="color:green" %)**10.130.1.1**
144 144  
145 -== **2.1 Connects to the network and accesses the gateway Web UI** ==
148 +[[image:image-20230527084515-1.png]]
146 146  
150 +[[image:image-20230527085250-2.png||height="495" width="284"]]
147 147  
148 -== **2.1.1 connect the network.** ==
149 149  
150 150  
151 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
154 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via Ethernet with DHCP IP from the router ====
152 152  
153 153  
154 154  (((
155 -Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
158 +Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
156 156  )))
157 157  
158 158  (((
... ... @@ -163,34 +163,43 @@
163 163  
164 164  
165 165  
166 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
169 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via LPS8-V2 Fallback IP ====
167 167  
168 168  
169 -[[image:image-20220622100542-2.png||height="369" width="1256"]]
172 +[[image:image-20230107084650-2.png||height="310" width="839"]]
170 170  
171 171  
172 -(((
173 -The LPS8-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
174 -)))
175 +(% style="color:blue" %)**Steps to connect via fallback IP:**
175 175  
177 +~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
176 176  
179 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
177 177  
178 -(% style="color:#037691" %)**Steps to connect via fallback IP:**
179 179  
180 -~1. Connect PC's Ethernet port to LPS8-V2's WAN port
182 +**Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)**
181 181  
182 -2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
183 183  
185 +As in the below photo:
184 184  
185 -[[image:image-20220622101433-4.png]]
187 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
186 186  
187 187  
188 -and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LPS8-V2 via Web or Console.
190 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
189 189  
192 +If you still can't access the LPS8-V2 fallback ip, follow this connection to debug : **[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
190 190  
191 -[[image:image-20220622102210-5.png||height="504" width="919"]]
192 192  
195 +3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
193 193  
197 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
198 +
199 +
200 +
201 +==== (% style="color:blue" %)**Method 4**(%%):  Connect via WiFi with DHCP IP from the router ====
202 +
203 +[[image:image-20220622100542-2.png||height="369" width="1256"]]
204 +
205 +
194 194  Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
195 195  
196 196  
... ... @@ -207,13 +207,104 @@
207 207  [[image:image-20220622102901-8.png||height="476" width="938"]]
208 208  
209 209  
222 +=== 2.1.2 Access Configure Web UI ===
210 210  
211 -== **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
212 212  
225 +**Web Interface**
213 213  
214 -=== **2.2.1 Select your area frequency** ===
227 +Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
215 215  
216 216  
230 +[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
231 +
232 +You will see the login interface of LPS8-V2 as shown below.
233 +
234 +The account details for Web Login are:
235 +
236 +(% style="color:blue" %)**User Name: root**
237 +
238 +(% style="color:blue" %)**Password:   dragino**
239 +
240 +[[image:image-20230106153501-1.png||height="367" width="894"]]
241 +
242 +
243 +== 2.2  Typical Network Setup ==
244 +
245 +=== 2.2.1  Overview ===
246 +
247 +
248 +LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
249 +
250 +* **WAN Port Internet Mode**
251 +
252 +* **WiFi Client Mode**
253 +
254 +* **Cellular Mode**
255 +
256 +=== 2.2.2  Use WAN port to access Internet ===
257 +
258 +
259 +By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
260 +
261 +
262 +[[image:image-20230411100633-2.png||height="501" width="935"]]
263 +
264 +
265 +=== 2.2.3  Access the Internet as a WiFi Client ===
266 +
267 +
268 +In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
269 +
270 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
271 +
272 +[[image:image-20230411095739-1.png||height="264" width="691"]]
273 +
274 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
275 +
276 +
277 +=== 2.2.4  Use built-in 4G modem for internet access ===
278 +
279 +
280 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
281 +
282 +Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
283 +
284 +
285 +If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
286 +
287 +First, install the Micro SIM card as below direction
288 +
289 +Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
290 +
291 +
292 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
293 +
294 +
295 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
296 +
297 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
298 +
299 +
300 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
301 +
302 +
303 +=== 2.2.5  Check Internet connection ===
304 +
305 +
306 +In the **home** page, we can check the Internet connection.
307 +
308 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
309 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
310 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
311 +
312 +[[image:image-20230411101534-3.png||height="544" width="942"]]
313 +
314 +
315 +== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
316 +
317 +=== 2.3.1 Select your area frequency ===
318 +
319 +
217 217  (((
218 218  First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
219 219  
... ... @@ -223,10 +223,9 @@
223 223  [[image:image-20220622103332-9.png||height="485" width="938"]]
224 224  
225 225  
329 +=== 2.3.2 Get the only gateway EUI ===
226 226  
227 -=== **2.2.2 Get the only gateway EUI** ===
228 228  
229 -
230 230  Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
231 231  
232 232  
... ... @@ -248,10 +248,9 @@
248 248  [[image:image-20220622103956-12.png]]
249 249  
250 250  
353 +=== 2.3.3 Register the gateway to The Things Network ===
251 251  
252 -== **2.2.3 Register the gateway to The Things Network** ==
253 253  
254 -
255 255  **Login to The Things Network**
256 256  
257 257  [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
... ... @@ -265,34 +265,30 @@
265 265  **Get it online**
266 266  
267 267  
369 += 3. Web Configure Pages =
268 268  
269 -= **3. Web Configure Pages** =
371 +== 3.1 Home ==
270 270  
271 271  
272 -== **3.1 Home** ==
374 +Shows the system running status:
273 273  
274 -
275 -//Shows the system running status~://
276 -
277 277  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
278 278  
279 279  
379 +== 3.2 LoRa Settings ==
280 280  
281 -== **3.2 LoRa Settings** ==
381 +=== 3.2.1 LoRa ~-~-> LoRa ===
282 282  
283 283  
284 -=== **3.2.1 LoRa ~-~-> LoRa** ===
384 +This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
285 285  
386 +Different LPS8v2 hardware versions can support different frequency ranges:
286 286  
287 -//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
388 +* (% style="color:#0000ff" %)**868**(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.
389 +* (% style="color:#0000ff" %)**915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
288 288  
289 -//Different LPS8v2 hardware versions can support different frequency ranges~://
290 -
291 -* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
292 -* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
293 -
294 294  (% class="wikigeneratedid" %)
295 -//After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
392 +After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
296 296  
297 297  
298 298  (% class="wikigeneratedid" %)
... ... @@ -304,26 +304,23 @@
304 304  )))
305 305  
306 306  
404 +== 3.3 LoRaWAN Settings ==
307 307  
308 -== **3.3 LoRaWAN Settings** ==
406 +=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
309 309  
310 310  
311 -=== **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
409 +This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.
312 312  
313 313  
314 -//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
315 -
316 -
317 317  [[image:image-20220616111932-2.png||height="516" width="672"]]
318 318  
319 319  
415 +=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
320 320  
321 -=== **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
322 322  
418 +This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
323 323  
324 -//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
325 325  
326 -
327 327  [[image:image-20220616113246-3.png||height="396" width="672"]]
328 328  
329 329  
... ... @@ -332,100 +332,157 @@
332 332  )))
333 333  
334 334  
429 +== 3.4 Network Settings ==
335 335  
336 -== **3.4 Network Settings** ==
431 +=== 3.4.1 Network ~-~-> WiFi ===
337 337  
433 +Users can configure the wifi WAN and enable Wifi Access Point on this interface
338 338  
339 -=== **3.4.1 Network ~-~-> WiFi** ===
435 +[[image:image-20230619095946-1.png||height="332" width="827"]]
340 340  
341 341  
342 -[[image:image-20220616114756-4.png||height="251" width="669"]]
438 +=== 3.4.2 Network ~-~-> System Status ===
343 343  
344 344  
441 +[[image:image-20220820134112-2.png||height="539" width="668"]]
345 345  
346 -=== **3.4.2 Network ~-~-> System Status** ===
347 347  
444 +=== 3.4.3 Network ~-~-> Network ===
348 348  
349 -[[image:image-20220820134112-2.png||height="539" width="668"]]
350 350  
447 +In the **Network ~-~-> Network** interface, Users can set the Ethernet WAN static ip address.
351 351  
449 +[[image:image-20230214093657-2.png||height="333" width="858"]]
352 352  
353 -=== **3.4.3 Network ~-~-> Firewall** ===
354 354  
452 +=== 3.4.4 Network ~-~-> Cellular ===
355 355  
356 -[[image:image-20220616115351-6.png||height="244" width="661"]]
357 357  
455 +In the **Network ~-~-> Cellular** interface, Users can Enable Cellular WAN and configure Celluar.
358 358  
457 +(% style="color:red" %)**Note: APN cannot be empty.**
359 359  
360 -== **3.5 System** ==
459 +[[image:image-20230228115126-1.png]]
361 361  
362 362  
363 -=== **3.5.1  System ~-~-> System Overview** ===
462 +After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellular state.
364 364  
464 +[[image:image-20230228115535-2.png||height="478" width="888"]]
365 365  
466 +
467 +Note: Known bugs: 4g consumes a lot of data which has been fixed by the package: dragino-ui-230716
468 +
469 +[[Reduce data method>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H8.3Howtoreducethe4gdataconsumed]]
470 +
471 +
472 +== 3.5 System ==
473 +
474 +=== 3.5.1 System ~-~-> System Overview ===
475 +
476 +
366 366  Shows the system info:
367 367  
368 -[[image:image-20220917141436-4.png||height="569" width="787"]]
479 +[[image:image-20220917144512-5.png||height="618" width="853"]]
369 369  
370 370  
482 +=== 3.5.2 System ~-~-> System General ===
371 371  
372 -=== **3.5.2 System ~-~-> Backup/Restore** ===
373 373  
485 +In the **System-> System General** interface, Users can customize the configuration System Password and set Timezone.
374 374  
375 -[[image:image-20220616115808-7.png||height="194" width="649"]]
487 +In addition, Users can customize the FallBack IP address.
376 376  
489 +[[image:image-20230214094058-3.png]]
377 377  
378 378  
379 -= **4. Build-in Server** =
492 +=== 3.5.3 System ~-~-> Backup/Restore ===
380 380  
381 381  
382 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
495 +[[image:image-20220917144725-6.png||height="208" width="869"]]
383 383  
384 384  
385 -[[image:image-20220820115644-1.png||height="217" width="778"]]
498 +=== 3.5.4 System ~-~-> Remoteit ===
386 386  
387 387  
501 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
502 +
503 +
504 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
505 +
506 +[[image:image-20221230092303-2.png]]
507 +
508 +
509 +=== 3.5.5 System ~-~-> Package Management ===
510 +
511 +
512 +In the **System ~-~-> Package Management** interface, Users can check the current version of Core Packages.
513 +
514 +[[image:image-20230214094316-4.png]]
515 +
516 +
517 += 4. Build-in Server =
518 +
519 +
520 +Since software version 0606,the default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**(%%), LoRaWAN Server: (% style="color:blue" %)**ChirpStack**(%%).
521 +
522 +[[image:image-20230616175617-8.png||height="390" width="894"]]
523 +
524 +[[image:image-20230616175558-7.png||height="362" width="894"]]
525 +
526 +
527 +
388 388  (% style="color:red" %)**Note:**
389 389  
390 - **Path**: System ~-~-> Built-in Server
530 + **Path**: Server ~-~-> Network Server
391 391  
532 + Server ~-~-> Application Server
392 392  
534 +
393 393  **Troubleshooting:**
394 394  
395 395  
396 396  **~ 1. URL does not jump properly**
397 397  
398 - For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
540 + For the ChirpStack, you can use the local IP address and the port is **8080** to access it.
399 399  
400 - For the Node-Red, you can use the local IP address and the port is 1880 to access it.
542 + For the Node-Red, you can use the local IP address and the port is **1880** to access it.
401 401  
402 402  
545 +== 4.1 LoRaWAN Network  Server ~-~- ChirpStack ==
403 403  
404 -== **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
405 405  
548 +You can access the gateway's built-in LNS server of (% style="color:blue" %)**ChirpStack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
406 406  
407 -You can access the gateway's built-in LNS server of **The Things Network - Stack **via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
408 -
409 409  Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
410 410  
411 411  
412 412  Login account:
413 413  
414 -**User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
555 +**Username : ** (% style="background-color:yellow" %)**admin**
415 415  
416 -**Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
557 +**Password: ** ** (% style="background-color:#ffff00" %)admin(%%)**
417 417  
559 +[[image:image-20230616175332-6.png||height="519" width="1029"]]
418 418  
419 -[[image:image-20220725171719-1.png||height="570" width="769"]]
420 420  
421 421  
563 +=== 4.1.1 The LPS8-V2 is registered and connected to Built-in ChirpStack ===
422 422  
423 -== **4.2 Application Server ~-~- Node-Red** ==
424 424  
566 +Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
425 425  
426 -You can access the gateway's built-in AS server of **Node-Red **via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
568 +The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>||anchor="H2.3TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork"]]
427 427  
570 +[[image:image-20230321092456-1.png]]
428 428  
572 +
573 +
574 +== 4.2 Application Server ~-~- Node-Red ==
575 +
576 +
577 +You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
578 +
579 +
429 429  Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
430 430  
431 431  
... ... @@ -433,15 +433,103 @@
433 433  
434 434  
435 435  
436 -= **5. How users can access LPS8v2 using serial USB** =
587 +=== **Using Node-Red, InfluxDB and Grafana** ===
437 437  
589 +The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
438 438  
439 -**USB TTL to LPS8v2  Connection:**
440 440  
441 -Port 1 of the UART on the LPS8v2 is GND
592 +the users can refer to this link to install them.
442 442  
594 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
595 +
596 +
597 +=== **Upgrade the node.js** ===
598 +
599 +By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
600 +
601 +
602 +the users can refer to this link to upgrade them.
603 +
604 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
605 +
606 +
607 +== 4.3 How to disable the built-in server ==
608 +
609 +
610 +Use the following commands to start and stop the TTNv3 service:
611 +
443 443  (% class="box infomessage" %)
444 444  (((
614 +**# start**
615 +systemctl start ttnstack
616 +
617 +**# stop**
618 +systemctl stop ttnstack
619 +
620 +**# enable**
621 +systemctl enable ttnstack
622 +
623 +**#disable**
624 +systemctl disable ttnstack
625 +)))
626 +
627 +Use the following commands to start and stop the Node-Red service:
628 +
629 +(% class="box infomessage" %)
630 +(((
631 +**# start**
632 +systemctl start nodered
633 +
634 +**# stop**
635 +systemctl stop nodered
636 +
637 +**# enable**
638 +systemctl enable nodered
639 +
640 +**#disable**
641 +systemctl disable nodered
642 +)))
643 +
644 +
645 +== 4.4 How to use ChirpStack on LPS8-V2 ==
646 +
647 +
648 +By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need follow this link to install chirpstack:
649 +
650 +**[[Build-in The Things Network migrate to ChirpStack>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2Build-inTheThingsNetworkmigratetoChirpStack]]**
651 +
652 +
653 +=== 4.4.1 How do users choose the chirpstack server frequency SubBand ===
654 +
655 +
656 +On the **Server ~-~-> Network Server** interface, choose the frequency Plan first.
657 +
658 +If the frequency Plan used is CN470, US915, AU915, or AS923, the user needs to choose a frequency sub-band, because the frequency Sub Band of ChirpStack starts from 0, so for example, us915_1 corresponds to the actual frequency US915_2.
659 +
660 +[[image:image-20230602140406-3.png||height="480" width="918"]]
661 +
662 +
663 +When the configuration is complete, click** "Save&Apply"**.
664 +
665 +
666 +(% style="color:red" %)**Note:**(%%) When adding device profile, the selected Region configuration is also calculated from 0, so setting it to us915_1 corresponds to US915 Sub Band 2.
667 +
668 +[[image:image-20230602143122-4.png||height="511" width="983"]]
669 +
670 +
671 += 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
672 +
673 +
674 +
675 += 6. How users can access LPS8-V2 using serial USB =
676 +
677 +
678 +(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
679 +
680 +Port 1 of the UART on the LPS8-V2 is GND
681 +
682 +(% class="box infomessage" %)
683 +(((
445 445  **TXD  <~-~--> UART RXD (Gray line)**
446 446  
447 447  **RXD  <~-~--> UART TXD (White line)**
... ... @@ -449,13 +449,10 @@
449 449  **GND <~-~--> GND (Black line)**
450 450  )))
451 451  
452 -
453 453  **LPS8v2 UART connection photo**
454 454  
455 -[[image:image-20220804163015-1.png||height="621" width="466"]]
693 +[[image:image-20230421094319-2.png||height="351" width="392"]]
456 456  
457 -
458 -
459 459  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
460 460  
461 461  
... ... @@ -465,129 +465,217 @@
465 465  [[image:image-20220804164747-2.png||height="622" width="594"]]
466 466  
467 467  
704 += 7. OTA System Update =
468 468  
469 -= **6. Use the helium gateway-rs as the Data-only Hotspot** =
470 470  
707 +LPS8v2 supports system auto-update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
471 471  
472 -== **Step 1: Configure Frequency Band** ==
473 473  
710 +== 7.1 Auto-update method ==
474 474  
475 -//Each country has a requirement for frequency region. Choose the right one for your area.//
476 476  
477 -[[image:image-20220905164308-1.png]]
713 +The default, each gateway will enable the auto-update function.
478 478  
715 +this function will be triggered every boot and every midnight.
479 479  
480 480  
481 -== **Step 2: Configure the forward address** ==
718 +Users can enable/disable it via Web Page
482 482  
720 +[[image:image-20230607094447-2.png]]
483 483  
484 -**Select one of the servers to configure.**
485 485  
486 -**For example:**
723 +== 7.2 Manual upgrade method ==
487 487  
488 -[[image:image-20220905164847-2.png]]
489 489  
726 +1). Using the Linux command to upgrade the system
490 490  
491 491  
492 -== **Step 3: Download and Install the Helium-gateway-rs** ==
729 +(% class="box infomessage" %)
730 +(((
731 +**apt update && apt install *dragino***
732 +)))
493 493  
494 494  
495 -**Access the gateway CLI via SSH.**
735 +2). Upgrade the system via the Web page button of "Manual Update"
496 496  
497 -[[image:image-20220905165222-3.png]]
498 498  
738 +**Note: this method needs about 10 mins, so you will get the log after 10 mins.  **
499 499  
500 -**Download gateway-rs.**
740 +[[image:image-20230607093849-1.png]]
501 501  
502 -[[image:image-20220905165715-5.png]]
503 503  
504 -(% class="box infomessage" %)
505 -(((
506 -**Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
507 -)))
508 508  
744 += 8. FAQ =
509 509  
510 -**Install gateway-rs.**
746 +== 8.1 How to change Hostname ==
511 511  
512 -[[image:image-20220905165917-7.png]]
513 513  
749 +By default, Hostname is dragino-xxxxxx,If the user needs to change the hostname, the user needs to access the linux console of LPS8v2 and enter the following command:
750 +
514 514  (% class="box infomessage" %)
515 515  (((
516 -**Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
753 +hostnamectl set-hostname dragino-123456
517 517  )))
518 518  
756 +[[image:image-20230517102429-1.png]]
519 519  
520 -**Modify configuration.**
758 +After the configuration is complete, run "reboot" to restart the gateway.
521 521  
522 522  
523 -[[image:image-20220905173847-12.png]]
761 +== 8.2 Build-in The Things Network migrate to ChirpStack ==
524 524  
525 525  
526 -(% class="box infomessage" %)
527 -(((
528 -**region=<Enter regional parameters> \
529 -&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
530 -&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
531 -)))
764 +Migrate guide:
532 532  
766 +**1. Ensure that the gateway is in good network condition, Recommended use of ETH.**
533 533  
534 -**Restart the helium_gateway**
768 +**2. On the Server ~-~-> Network Server interface, click "Management"**
535 535  
536 -[[image:image-20220905170920-9.png]]
770 +[[image:image-20230616162454-1.png]]
537 537  
538 538  
539 -(% class="box infomessage" %)
540 -(((
541 -**systemctl restart helium_gateway**
542 -)))
773 +**3. Click "Migrate-Chirpstack"**
543 543  
775 +[[image:image-20230616162742-2.png]]
544 544  
545 -**Check the helium_gateway Log：**
546 546  
547 -[[image:image-20220905173952-13.png]]
778 +**4. Strat Install **
548 548  
549 549  
781 +Click start Install and wait until the migration succeeds
782 +
783 +[[image:image-20230616162934-3.png]]
784 +
785 +
786 +**5.Migration complete check result**
787 +
788 +[[image:image-20230616174526-4.png||height="706" width="983"]]
789 +
790 +
791 +[[image:image-20230616180004-9.png]]
792 +
793 +
794 +== 8.3 How to reduce the 4g data consumed ==
795 +
796 +1). The gateway will check the network via ping 1.1.1.1/8.8.8.8 which will consume a lot of data, you can set the interval time to reduce data consume.
797 +
798 +
799 +[[image:image-20230719100239-1.png||height="724" width="994"]]
800 +
801 +
802 +2. Change the LoRa status package interval time: It does not affect the connection between the gateway and the server, just the status packet interval
803 +
804 +[[image:image-20230719100332-2.png]]
805 +
806 +3. Disable the auto-update:
807 +
808 +[[image:image-20230719100419-3.png||height="458" width="995"]]
809 +
810 +
811 +8.4 How to connect the helium blockchain as a Data-only hotspot
812 +
550 550  (% class="box infomessage" %)
551 551  (((
552 -**journalctl -u helium_gateway -f**
815 +apt update && apt install helium-gateway
553 553  )))
554 554  
555 555  
556 -(% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
557 557  
558 -where the helium gateway log is shown:
559 559  
560 -[[image:image-20220905174534-14.png]]
821 += 9. Trouble Shooting =
561 561  
823 +== 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
562 562  
563 -So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
564 564  
826 +[[image:image-20220920135918-1.png]]
565 565  
566 566  
567 -= (% style="color:inherit; font-family:inherit; font-size:29px" %)**7. Supports**(%%) =
829 +This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
568 568  
831 +By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
569 569  
833 +
834 +So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
835 +
836 +**Click the update URL button to configure the URL with the current eth port address.**
837 +
838 +[[image:image-20220920141936-2.png]]
839 +
840 +
841 +== 9.2  The built-in TTN status is "Not Running" and the URI is "dragino-123456". How users fix this problem ==
842 +
843 +
844 +When this problem occurs, click "**Update To DEFAULT**" ,this problem will be fixed.
845 +
846 +[[image:image-20230508171607-1.png]]
847 +
848 +
849 +== 9.3  Fallback IP does not work, how can users check ==
850 +
851 +
852 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
853 +
854 +
855 +**1.Check whether the configuration is correct**
856 +
857 +Run the CMD command to ipconfig and ping 172.31.255.254.
858 +
859 +If this fails, the user needs to reconfigure.
860 +
861 +[[image:image-20230413170224-3.png||height="433" width="707"]]
862 +
863 +[[image:image-20230413170246-4.png]]
864 +
865 +
866 +**2. Check whether the firewall is disabled**
867 +
868 +If the firewall is not down, this will affect access to the gateway.
869 +
870 +
871 +== 9.4  Click "Manual_Update", why there is no response? ==
872 +
873 +
874 +When you click "Manual_Update", the gateway will finish updating within 10 minutes and display the update log.
875 +
876 +
877 +[[image:image-20230527090555-3.png||height="660" width="832"]]
878 +
879 +
880 +== 9.5  Why the LPS8V2's Access Point does not do not appear & Fallback IP unable to access ==
881 +
882 +
883 +Earlier versions of the LPS8V2 which missing the AP driver and not installed the fallback package, so the users have to do an extra update.
884 +
885 +
886 +(% class="box infomessage" %)
570 570  (((
571 -**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
888 +apt update && apt install dragino-fallback
889 +
890 +wget -P /tmp/ [[http:~~/~~/repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]] && dpkg -i /tmp/[[linux-image-current-draginohp0z_22.05.2_armhf.deb>>http://repo.dragino.com/release/hp0c-packages/linux-image-current-draginohp0z_22.05.2_armhf.deb]]
572 572  )))
573 573  
893 +
894 += (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
895 +
896 +
574 574  (((
575 -**//With your question as detailed as possible. We will reply and help you in the shortest.//**
898 +If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
899 +)))
576 576  
901 +(((
902 +With your question as detailed as possible. We will reply and help you in the shortest.
577 577  
578 578  
579 -= **8. Reference** =
905 += 11. Reference =
580 580  
581 581  
582 582  * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
583 583  * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
584 584  
585 -
586 -
587 587  
588 588  )))
589 589  
590 -= **9. Order Info** =
914 += 12. Order Info =
591 591  
592 592  
593 593  (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
... ... @@ -595,26 +595,33 @@
595 595  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
596 596  
597 597  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
922 +
598 598  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
924 +
599 599  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
926 +
600 600  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
928 +
601 601  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
930 +
602 602  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
603 603  
604 604  (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
605 605  
606 -* (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
607 -* (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
608 -* (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
609 -* (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
935 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
610 610  
611 -More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
937 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
612 612  
939 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
613 613  
941 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
614 614  
615 -= **10. Manufacturer Info** =
943 +More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
616 616  
617 617  
946 += 13. Manufacturer Info =
947 +
948 +
618 618  **Shenzhen Dragino Technology Development co. LTD**
619 619  
620 620  Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
... ... @@ -622,10 +622,9 @@
622 622  LongCheng Street, LongGang District ; Shenzhen 518116,China
623 623  
624 624  
956 += 14. FCC Warning =
625 625  
626 -= **11. FCC Warning** =
627 627  
628 -
629 629  (((
630 630  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
631 631  )))
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20220917144725-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.7 KB
Content
image-20220920135918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +55.0 KB
Content
image-20220920141936-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20221230092248-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
image-20221230092303-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20221230092331-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +49.3 KB
Content
image-20230106153501-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20230106153814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.1 KB
Content
image-20230106154302-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230107084158-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
image-20230107084650-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230107085743-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230107085904-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230111094220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.9 KB
Content
image-20230111094247-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +397.1 KB
Content
image-20230214093641-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.0 KB
Content
image-20230214093657-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.8 KB
Content
image-20230214094058-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230214094316-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +41.4 KB
Content
image-20230214095318-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +35.8 KB
Content
image-20230222094908-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +14.4 KB
Content
image-20230228115126-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +34.0 KB
Content
image-20230228115535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +415.3 KB
Content
image-20230321092456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +63.3 KB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content
image-20230425153403-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.5 KB
Content
image-20230425153417-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20230425153823-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +35.5 KB
Content
image-20230425154058-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +50.6 KB
Content
image-20230425154740-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +62.9 KB
Content
image-20230425155300-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.7 KB
Content
image-20230425155612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +19.6 KB
Content
image-20230425155659-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
image-20230508171607-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.5 KB
Content
image-20230517102429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20230524183659-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230526103829-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20230526104156-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +33.0 KB
Content
image-20230526104501-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +125.6 KB
Content
image-20230526113915-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.8 KB
Content
image-20230526115650-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +124.0 KB
Content
image-20230527084515-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +56.0 KB
Content
image-20230527085250-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +144.5 KB
Content
image-20230527090555-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +52.9 KB
Content
image-20230602135658-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.5 KB
Content
image-20230602135825-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.4 KB
Content
image-20230602140406-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.0 KB
Content
image-20230602143122-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +82.6 KB
Content
image-20230607093849-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +63.9 KB
Content
image-20230607094447-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +52.5 KB
Content
image-20230616162454-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20230616162742-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +22.7 KB
Content
image-20230616162934-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20230616174526-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
image-20230616174608-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +44.4 KB
Content
image-20230616175332-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.6 KB
Content
image-20230616175558-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.9 KB
Content
image-20230616175617-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20230616180004-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20230619095946-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.0 KB
Content
image-20230719100239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.4 KB
Content
image-20230719100332-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
image-20230719100419-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0