Last modified by Edwin Chen on 2025/05/04 09:33
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8
9 = 1. Enable Cellular Connection =
10
11
12 If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.
13
14 [[image:image-20220601110850-2.png]]
15
16 **//Enable Cellular Connection//**
17
18
19 (((
20 If your device doesn't have a cellular module, you will see a cellular module not detected.
21 )))
22
23 [[image:image-20220527153544-2.png]]
24
25
26 = 2. How to Trouble Shooting if Cellular connection fails =
27
28
29 If there is a problem with the cellular connection. Please check the below points:
30
31
32 == 2.1 For LPS8N/DLOS8N/LG308N ==
33
34 == 2.1.1 Do you order the model with a cellular option ==
35
36
37 Make sure you order the model with the cellular option. Can check by command or via the Web UI.
38
39 (% class="box" %)
40 (((
41 //root@dragino-1bbd90:~~# lsusb
42 Bus 001 Device 004: ID 2c7c:0125      ~-~-> This is the Cellular module
43 Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
44 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub//
45 )))
46
47 [[image:image-20220601110748-1.png]]
48
49
50 === 2.1.2 Do you input the SIM card correctly ===
51
52
53 **Below command can check if you have a SIM card inserted, or via Web UI**
54
55 * Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on
56 * Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.
57
58 (% class="box" %)
59 (((
60 (% class="mark" %)**For Models: LPS8N, LG308N, DLOS8N**(%%)
61 //root@dragino-1dadd8:~~# **comgt -d /dev/ttyUSB3**
62 SIM ready
63 Waiting for Registration..(120 sec max)
64 Registered on Home network: "CHN-UNICOM",7
65 Signal Quality: 10,99//
66 )))
67
68
69 (% class="wikigeneratedid" %)
70 [[image:image-20220527153804-4.png]]
71
72
73 (% class="wikigeneratedid" %)
74 **​​(% style="color:red" %)Note:(%%)**(% style="color:red" %) **If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.**
75
76 (% class="wikigeneratedid" %)
77 Please check the IP address is displayed and the Internet displays "OK", it works properly.
78
79 (% class="wikigeneratedid" %)
80 [[image:image-20220527153827-5.png]]
81
82
83 === 2.1.3 Check dialing info ===
84
85
86 run "**logread -f**" in gateway CLI。
87
88 (% class="box" %)
89 (((
90 Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
91 Fri Feb  7 01:20:29 2020 user.notice iot_keep_alive: Ping WAN
92 Fri Feb  7 01:20:29 2020 user.notice iot_keep_alive: Default interface is
93 Fri Feb  7 01:20:29 2020 user.notice iot_keep_alive: No internet at any interface
94 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: abort on (BUSY)
95 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: abort on (NO CARRIER)
96 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: abort on (ERROR)
97 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: report (CONNECT)
98 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: timeout set to 10 seconds
99 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: send (AT&F^M)
100 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: expect (OK)
101 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: AT&F^M^M
102 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: OK
103 Fri Feb  7 01:20:29 2020 local2.info chat[29485]:  ~-~- got it
104 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: send (ATE1^M)
105 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: expect (OK)
106 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: ^M
107 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: ATE1^M^M
108 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: OK
109 Fri Feb  7 01:20:29 2020 local2.info chat[29485]:  ~-~- got it
110 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: send (AT+CGDCONT=1,"IP",""^M)
111 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: timeout set to 30 seconds
112 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (OK)
113 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
114 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: AT+CGDCONT=1,"IP",""^M^M
115 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: OK
116 Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
117 (% style="color:#037691" %)**Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
118 Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator**(%%)
119 (% style="color:black" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (CONNECT)
120 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
121 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ATD*99#^M^M
122 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: CONNECT
123 Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
124 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send ( ^M)
125 Fri Feb  7 01:20:30 2020 daemon.info pppd[29452]: Serial connection established.
126 )))
127
128
129 == 2.2 For LPS8v2/MS48-LR ==
130
131 (% class="wikigeneratedid" id="H2.2.1Doyouorderthemodelwithacellularoption" %)
132 (% id="cke_bm_23549S" style="display:none" %)
133
134 === 2.2.1 Do you order the model with a cellular option ===
135
136
137 Make sure you order the model with the cellular option. Can check by command or via the Web UI.
138
139 (% class="box" %)
140 (((
141 //root@dragino-2d5d26:~~# lsusb
142 Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
143 Bus 004 Device 002: ID 2c7c:0125 Quectel Wireless Solutions Co., Ltd. EC25 LTE modem    ~-~-> This is the Cellular module
144 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
145 Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
146 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
147 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
148 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
149 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
150 Bus 001 Device 002: ID 0bda:f179 Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter
151 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
152 Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
153 root@dragino-2d5d26:~~# //
154 )))
155
156 [[image:image-20241205150916-1.png]]
157
158 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/Notes%20for%20cellular%20network%20connection/WebHome/image-20220527153804-4.png?rev=1.1||alt="image-20220527153804-4.png"]]
159
160 **Note:** **If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.**
161
162 Please check the IP address is displayed and the Internet displays "OK", it works properly.
163
164 [[image:https://wiki.dragino.com/xwiki/bin/download/Main/Notes%20for%20cellular%20network%20connection/WebHome/image-20220527153827-5.png?rev=1.1||alt="image-20220527153827-5.png"]]
165
166
167 === 2.2.2 Check cellular info ===
168
169
170 **Below command can check if you have a SIM card inserted, or via Web UI**
171
172 * Make sure to Power Off when you insert the SIM card and power on the device. The SIM card slot of the gateway does not support hot swap
173 * Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.
174
175 [[image:image-20241231153947-1.jpeg||height="287" width="968"]]
176
177
178 run "**quectel-CM**" in gateway CLI
179
180 (% class="box infomessage" %)
181 (((
182 Usage:  /usr/bin/quectel-CM [options]
183 -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
184 -p pincode Verify sim card pin if sim card is locked
185 -p [quectel-][qmi|mbim]-proxy  Request to use proxy
186 -f logfilename Save log message of this program to file
187 -u usbmonlog filename  Save usbmon log to file
188 -i interface Specify which network interface to setup data call when multi-modems exits
189 -4 Setup IPv4 data call (default)
190 -6 Setup IPv6 data call
191 -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
192 -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
193 -b Enable network interface bridge function (default 0)
194 -v Verbose log mode, for debug purpose.[Examples]
195 Example 1: /usr/bin/quectel-CM
196 Example 2: /usr/bin/quectel-CM -s 3gnet
197 Example 3: /usr/bin/quectel-CM -s 3gnet -v
198 )))
199
200
201 ==== **The gateway cellular logs show SIMStatus: SIM_ABSENT** ====
202
203
204 If the SIM status is **SIM_ABSENT**, the SIM card is not detected. You need to check whether the SIM card is available and whether the device is powered off when the SIM card is installed.
205
206 (% class="box" %)
207 (((
208 root@dragino-2d5d26:~~# quectel-CM -s 3gnet
209 [12-05_07:12:08:451] Quectel_QConnectManager_Linux_V1.6.0.24
210 [12-05_07:12:08:454] Find /sys/bus/usb/devices/4-1 idVendor=0x2c7c idProduct=0x125, bus=0x004, dev=0x002
211 [12-05_07:12:08:455] Auto find qmichannel = /dev/cdc-wdm0
212 [12-05_07:12:08:455] Auto find usbnet_adapter = wwan0
213 [12-05_07:12:08:455] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
214 [12-05_07:12:08:456] Modem works in QMI mode
215 [12-05_07:12:08:516] cdc_wdm_fd = 7
216 [12-05_07:12:08:613] Get clientWDS = 21
217 [12-05_07:12:08:645] Get clientDMS = 1
218 [12-05_07:12:08:676] Get clientNAS = 4
219 [12-05_07:12:08:709] Get clientUIM = 2
220 [12-05_07:12:08:741] Get clientWDA = 1
221 [12-05_07:12:08:774] requestBaseBandVersion EC25EFAR06A16M4G
222 [12-05_07:12:08:902] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_ABSENT ~-~-~-~--> This means that the SIM cannot be read**(%%)
223 [12-05_07:12:08:902] requestSetProfile[1] 3gnet~/~//0
224 [12-05_07:12:08:965] requestGetProfile[1] 3gnet~/~//0
225 [12-05_07:12:08:997] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW
226 [12-05_07:12:09:030] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
227 [12-05_07:12:09:030] ifconfig wwan0 0.0.0.0
228 [12-05_07:12:09:043] ifconfig wwan0 down
229 ^C[12-05_07:12:18:311] QmiWwanThread exit
230 [12-05_07:12:18:313] qmi_main exit
231 )))
232
233
234 ==== **The gateway cellular logs show SIMStatus: SIM_PIN** ====
235
236
237 If the SIM status is **SIM_PIN**, it means that the SIM card is read but the Pincode needs to be filled in.
238
239 (% class="box" %)
240 (((
241 root@dragino-2d5d26:~~# quectel-CM -s 3gnet
242
243 [10-31_12:17:10:166] Find /sys/bus/usb/devices/2-1 idVendor=0x2c7c idProduct=0x125, bus=0x002, dev=0x002
244 [10-31_12:17:10:168] Auto find qmichannel = /dev/cdc-wdm0
245 [10-31_12:17:10:168] Auto find usbnet_adapter = wwan0
246 [10-31_12:17:10:168] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
247 [10-31_12:17:10:170] Modem works in QMI mode
248 [10-31_12:17:10:234] cdc_wdm_fd = 8
249 [10-31_12:17:10:325] Get clientWDS = 21
250 [10-31_12:17:10:356] Get clientDMS = 1
251 [10-31_12:17:10:389] Get clientNAS = 4
252 [10-31_12:17:10:449] Get clientUIM = 2
253 [10-31_12:17:10:489] Get clientWDA = 1
254 [10-31_12:17:10:518] requestBaseBandVersion EC25EFAR06A16M4G
255 [10-31_12:17:10:645] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_PIN ~-~-~-~--> This means you need to fill in the Pincode**(%%)
256 [10-31_12:17:10:645] requestSetProfile[1] Telekom~/~//0
257 [10-31_12:17:10:713] requestGetProfile[1] Telekom~/~//0
258 [10-31_12:17:10:743] requestRegistrationState2 MCC: 262, MNC: 2, PS: Detached, DataCap: UNKNOW
259 [10-31_12:17:10:773] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
260 [10-31_12:17:10:774] ifconfig wwan0 0.0.0.0
261 [10-31_12:17:10:790] ifconfig wwan0 down
262 [10-31_18:27:35:797] QmiWwanThread exit
263 [10-31_18:27:35:798] qmi_main exit
264 )))
265
266
267 ==== **The gateway cellular logs show SIMStatus: SIM_READY** ====
268
269
270 If the SIM status is **SIM_READY**,** ** it means that the SIM card is detected
271
272 (% class="box" %)
273 (((
274 root@dragino-2d5d26:~~# quectel-CM -s 3gnet
275 [12-05_07:32:57:187] Quectel_QConnectManager_Linux_V1.6.0.24
276 [12-05_07:32:57:191] Find /sys/bus/usb/devices/4-1 idVendor=0x2c7c idProduct=0x125, bus=0x004, dev=0x002
277 [12-05_07:32:57:192] Auto find qmichannel = /dev/cdc-wdm0
278 [12-05_07:32:57:193] Auto find usbnet_adapter = wwan0
279 [12-05_07:32:57:198] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
280 [12-05_07:32:57:199] Modem works in QMI mode
281 [12-05_07:32:57:261] cdc_wdm_fd = 7
282 [12-05_07:32:57:334] Get clientWDS = 20
283 [12-05_07:32:57:366] Get clientDMS = 1
284 [12-05_07:32:57:398] Get clientNAS = 4
285 [12-05_07:32:57:431] Get clientUIM = 1
286 [12-05_07:32:57:462] Get clientWDA = 1
287 [12-05_07:32:57:495] requestBaseBandVersion EC25EFAR06A16M4G
288 [12-05_07:32:57:623] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_READY**(%%)
289 [12-05_07:32:57:655] requestGetProfile[1] 3gnet~/~//0
290 [12-05_07:32:57:687] requestRegistrationState2 MCC: 460, MNC: 15, PS: Detached, DataCap: UNKNOW
291 [12-05_07:32:57:719] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
292 [12-05_07:32:57:719] ifconfig wwan0 0.0.0.0
293 [12-05_07:32:57:731] ifconfig wwan0 down
294 [12-05_07:33:00:727] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW
295 [12-05_07:33:15:895] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: UNKNOW
296 [12-05_07:33:19:063] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: EDGE
297 [12-05_07:33:19:095] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: EDGE
298 [12-05_07:33:21:463] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: EDGE
299 [12-05_07:33:22:359] requestSetupDataCall WdsConnectionIPv4Handle: 0x8728b3d0
300 [12-05_07:33:22:488] ifconfig wwan0 up
301 [12-05_07:33:22:504] busybox udhcpc -f -n -q -t 5 -i wwan0
302 udhcpc: started, v1.30.1
303 udhcpc: sending discover
304 udhcpc: sending discover
305 udhcpc: sending discover
306 udhcpc: sending discover
307 udhcpc: sending discover
308 udhcpc: no lease, failing
309 [12-05_07:33:38:103] File:ql_raw_ip_mode_check Line:136 udhcpc fail to get ip address, try next:
310 [12-05_07:33:38:103] ifconfig wwan0 down
311 [12-05_07:33:38:116] echo Y > /sys/class/net/wwan0/qmi/raw_ip
312 [12-05_07:33:38:117] ifconfig wwan0 up
313 [12-05_07:33:38:130] busybox udhcpc -f -n -q -t 5 -i wwan0
314 udhcpc: started, v1.30.1
315 udhcpc: sending discover
316 udhcpc: sending select for 10.171.60.177
317 udhcpc: lease of 10.171.60.177 obtained, lease time 7200
318 )))
319
320 == 2.3 If the following situation occurs, how can users solve this problem? ==
321
322 === 2.3.1 The gateway can read the SIM card, But the Internet is displayed as Fail. ===
323
324
325 Users can check whether the APN matched by the SIM card is correct.
326
327 Regarding what APN your SIM card should use, Users can search for the APN corresponding to the SIM card by Google or ask the carrier.
328
329 [[image:image-20220718155937-1.png||height="562" width="497"]]
330
331
332 === 2.3.2 The gateway can read the SIM card, But the Internet is displayed as Fail, and at the same time Network displays the carrier network. ===
333
334
335 It should be SIM card no flow, users can insert SIM cards into the mobile phone for testing.
336
337 [[image:1658131428288-728.png||height="538" width="494"]]
338
339
340 === 2.3.3 The gateway can't read the SIM card, and the Internet is displayed as Fail. ===
341
342
343 Users need to check whether the SIM card type is suitable for the EC25 module.
344
345 [[image:1658131612484-845.png||height="549" width="499"]]
346
347
348 === 2.3.4 SIM display：~*~**SIM ERROR~*~** Check SIM is inserted test SIM in a mobile phone？ ===
349
350
351 Users can insert SIM cards into the mobile phone for testing.
352
353 [[image:image-20220718160804-3.png||height="602" width="500"]]
354
355
356 = 3. Share Cellular Network for WiFi & LAN clients =
357
358
359 (((
360 By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.
361 )))
362
363 (% class="box" %)
364 (((
365 (((
366 root@dragino-1d25dc:~~# cat /etc/config/firewall
367
368 config defaults
369 option syn_flood '1'
370 option input 'ACCEPT'
371 option output 'ACCEPT'
372 option forward 'REJECT'
373 config zone
374 option name 'lan'
375 list network 'lan'
376 option input 'ACCEPT'
377 option output 'ACCEPT'
378 option forward 'REJECT' 
379 config zone
380 option name 'wan'
381 list network 'wan'
382 list network 'wwan'
383 list network 'wan6'
384 list network 'cellular'   ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--> Add this line and reboot
385 option input 'REJECT'
386 option output 'ACCEPT'
387 option forward 'ACCEPT'
388 option masq '1'
389 option mtu_fix '1'
390 config forwarding
391 option src 'lan'
392 option dest 'wan'
393 )))
394 )))
395
396 (((
397 and run **/etc/init.d/firewall reload** or **reboot the device**.
398
399
400 = 4. Switching between Cellular and Ethernet and Wi-Fi networks =
401
402
403 By default, Cell is the backup WAN where the Ethernet or Wi-Fi network is used first if they are available.
404
405 Once the Ethernet of the Wi-Fi network is unavailable where the gateway network will switch to a Cell network from Ethernet or Wi-Fi.
406
407
408 **Enable Cellular and connect Ethernet at the same time**
409
410 ETH icon is displayed as ​​​ [[image:1658135519305-444.png||height="18" width="19"]] Indicates that Ethernet is the main working network.
411
412 Cell icon is displayed as  [[image:1658135500498-725.png||height="17" width="17"]] Indicates that Cellular is the backup WAN.
413
414
415 == 4.1 Switching between Cellular and Ethernet networks ==
416
417
418 When connecting to the AP WiFI of the gateway, users can access the Web UI of the gateway through the default address 10.130.1.1
419
420 [[image:image-20220606140622-2.png||height="664" width="1106"]]
421
422
423 **Remove the network cable from the WAN port on the gateway, the gateway will switch to a Cellular network.**
424
425 [[image:image-20220606140859-4.png||height="687" width="1107"]]
426
427 (% style="display:none" %) (%%)
428
429 == 4.2 Switching between Cellular and WiFi networks ==
430
431
432 (% class="wikigeneratedid" %)
433 Enable **Cellular** and connect **WiFi** at the same time
434
435 WiFi icon is displayed as ​​​[[image:1658135519305-444.png||height="23" width="24"]] Indicates that WiFi is the main working network.
436
437 Cell icon is displayed as  [[image:1658135500498-725.png||height="23" width="22"]] Indicates that Cellular is the backup WAN.
438
439
440 [[image:image-20220606141113-7.png||height="678" width="1106"]]
441
442
443 **Close the WiFi WAN, the gateway will switch to a Cellular network.**
444
445 [[image:image-20220606140932-5.png||height="687" width="1107"]]
446
447
448 == 4.3 At the same time start Cellular and Ethernet and Wi-Fi networks ==
449
450
451 [[image:image-20220606140328-1.png||height="682" width="1108"]]
452
453
454 )))
455
456 = 5. How does the gateway view the International Mobile Equipment Identity (IMEI) =
457
458 == For LIG16,LPS8, LPS8N, LG308, LG308N, DLOS8, DLOS8N view the International Mobile Equipment Identity (IMEI) ==
459
460
461 Users can get the IMEI via Linux command, but you have to access the gateway CLI.
462
463 (% class="box infomessage" %)
464 (((
465 **root@dragino-24b3c8:~~# comgt -d /dev/ttyModemAT -s /etc/gcom/getimei.gcom **
466 )))
467
468 [[image:image-20231218095203-4.png]]
469
470
471 [[image:image-20231218095426-6.jpeg||height="466" width="990"]]
472
473
474 == For LPS8v2 view the International Mobile Equipment Identity (IMEI) ==
475
476 (% class="box infomessage" %)
477 (((
478 **root@dragino-e4e891:~~# /usr/local/dragino/cell/getinfo.sh**
479 )))
480
481 [[image:image-20231218094526-1.png]]
482
483
484 [[image:image-20231218094741-3.png]]
485
486
487 == How does the gateway access the Quetel module directly (to send AT commands) ==
488
489
490 Users can access the gateway CLI and run the minicom command to get the configuration interface.
491
492 (((
493
494
495 **Enter the minicom command, then select the option ''serial port setup".**
496 )))
497
498 (% class="box infomessage" %)
499 (((
500 **root@dragino-1ef9ac:~~# minicom -s**
501 )))
502
503 [[image:image-20220527154132-6.png]]
504
505
506 And then, change the setting:
507
508 (% class="box infomessage" %)
509 (((
510 **Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
511
512 **Bps/Par/Bits :(% style="color:#037691" %) 9600 8N1(%%)**
513 )))
514
515
516 (% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
517
518 [[image:image-20220527154154-7.png]]
519
520
521 == International Mobile Equipment Identity (IMEI) ==
522
523
524 (((
525 Enter (% style="color:blue" %)**AT+GSN **(%%)in the interface to get the IMEI,
526 )))
527
528 (((
529 **For example: (% style="color:#037691" %)860548042566627(%%)**
530 )))
531
532 (% class="box infomessage" %)
533 (((
534 (((
535 **AT+GSN**
536 )))
537 )))
538
539 [[image:image-20220527154231-8.png]]
540
541
542 == Integrated Circuit Card Identifier (ICCID) ==
543
544
545 (((
546 Enter (% style="color:blue" %)**AT+QCCID **(%%)in the interface to get the ICCID,
547 )))
548
549 (((
550 **For example: (% style="color:#037691" %)89860118005400261748(%%)**
551
552 (% class="box infomessage" %)
553 (((
554 **AT+QCCID**
555 )))
556 )))
557
558 [[image:1678675878256-777.png]]
559
560
561 = 6. How does the gateway connect to the network via a USB 4G Dongle =
562
563 == 6.1 Introduction ==
564
565
566 (% style="color:red" %)**Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware**
567
568 (((
569 This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.
570
571
572 )))
573
574 (((
575 Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.
576 )))
577
578 (((
579 This is not beginner-friendly due to too many protocols.
580
581 For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]
582
583
584 )))
585
586 == 6.2 How to use the USB Dongle at the gateway ==
587
588
589 Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.
590
591 (((
592 For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.
593 )))
594
595 (% class="box" %)
596 (((
597 Huawei-E3372/E8372
598 Check the (% style="color:#037691" %)**E3372**(% style="color:black" %) version to determine the mode.
599 The version numbers starting with 21 is NCM mode
600 The version numbers starting with 22 is Hilink mode
601 The E8372 only has Hilink mode
602 **~ **(% style="color:red" %)**Note： The e3372 in the vast majority of cases is Hilink mode**
603 )))
604
605
606 == 6.3 Hilink mode ==
607
608
609 //Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
610
611
612 === 6.3.1 Plugs into the device ===
613
614
615 (((
616 USB-Dongle plugs into the gateway USB port
617 )))
618
619 (((
620 Check the USB module via command (% style="color:#037691" %)**lsusb**
621 )))
622
623 (((
624 (% style="color:red" %)**Note: Users need to that connect to the gateway command line via ssh.**
625 )))
626
627 [[image:image-20220527154739-9.png]]
628
629
630 === 6.3.2 Detection of new network interfaces added ===
631
632
633 Check network configuration command line input:
634
635 (% class="box infomessage" %)
636 (((
637 (((
638 **~ root@dragino-1ef9ac:~~# ifconfig -a**
639 )))
640 )))
641
642 [[image:image-20220527154822-10.png]]
643
644 In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**
645
646 Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**
647
648
649 === 6.3.3 Add the new interface to the network configuration. ===
650
651
652 //Enter the configuration from the command line~://
653
654 (% class="box" %)
655 (((
656 uci set network.lte=interface
657 uci set network.lte.proto=dhcp
658 uci set network.lte.ifname=eth2    ~-~-~-~-~-~-~-~-->#This depend on the name of the new interface gateway add
659 uci commit network
660 uci set firewall.@zone[1].network="wan wwan wan6 lte"
661 uci commit firewall
662 /etc/init.d/network restart
663 )))
664
665 [[image:image-20220527154937-11.png]]
666
667
668 //**Checking Network Configurations**//
669
670 //Command-line input: (% style="color:#037691" %)**ifconfig**//
671
672 [[image:image-20220527155013-12.png]]
673
674 Now, Gateway is configured to access the internet on the LTE network.
675
676
677 == 6.4 NCM mode ==
678
679
680 == 6.5 Troubleshooting ==
681
682 === 6.5.1 The USB-Dongle interface cannot obtain the IP address. ===
683
684
685 Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.
686
687
688 = 7. How to reduce data traffic =
689
690 == 7.1 How the gateway will consume data traffic ==
691
692
693 Below list the place where the data traffic will use.
694
695 * Valid uplink data to LoRaWAN server or IoT server. ( We can't reduce this as they are the data we want)
696 * Invalid uplink sensor data to LoRaWAN serevr. ( See Filter unwanted packets)
697 * LoRaWAN Status push or polling data to LoRaWAN server . ( We can reduce this part , see below for discussion)
698 * System Keep Alive data. ( To ensure the system is more robust, can be disabled)
699 * system Time synchronization Checking
700 * Auto update ( Software auto update, can be disabled)
701
702 === 7.1.1 Uploading backup files to reduced data consumption ===
703
704
705 Users can upload this backup file to reduce data consumption in **System~-~->Back Up/Restore Config**, Download link for backup file: **[[attach:Reduced_data_consumption.tar.gz||target="_blank"]]**
706
707 [[image:image-20240712093532-1.png]]
708
709
710 === 7.1.2 Auto update ===
711
712
713 Gateway will check for update every day for new configure or software. User can disable them by below method.
714
715
716 === 7.1.3 Filter unwanted packets ===
717
718
719 When gateway connect to LoRaWAN server via LoRaWAN protocol , Gateway will by default get every possible LoRaWAN packets and forward to LoRaWAN server. If there are sensors from others in the same area, such sensor data will also be forward to LoRaWAN server ( they will be ignore by the server). This also consume data.
720
721 See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
722
723
724 == 7.2 Usage statistics ==
725
726 === 7.2.1 How does Openwrt usage statistics ===
727
728
729 This is a general instruction for the use of Openwrt of Dragino devices. Current models include:
730
731 * LPS8,LPS8N
732 * LG308,LG308N
733 * DLOS8,DLOS8N
734 * LIG16
735
736 ~1. Activate LuCI and connect to SSH following [[these instructions>>doc:Main.Install Luci in the new UI firmware.WebHome]]
737
738 2. Install luci-app-statistics using the following terminal commands:
739
740 {{{opkg update
741 opkg install luci-app-statistics
742 opkg install collectd-mod-interface
743 /etc/init.d/collectd enable
744 reboot
745 }}}
746
747 3. Select the interface to be monitored by going to **Statistics > Setup **in the upper menu then **Network plugins > Interfaces. **Select **3g-cellular **in the list then save. You can select multiple interfaces by pressing the **ctrl key **while selecting the interfaces.
748
749 [[image:image-20221124133431-1.png]]
750
751 [[image:image-20221124135102-2.png]]
752
753
754 4. View the graphs and statistics using by going to **Statistics > Graphs** **> Interfaces > 3g-cellullar**
755
756 [[image:image-20221124134927-1.png]]
757
758
759 === 7.2.2 Gateway Traffic Usage Table ===
760
761
762 {{velocity}}
763 $xwiki.ssfx.use("js/xwiki/table/table.css")
764 $xwiki.jsfx.use("js/xwiki/table/tablefilterNsort.js", true)
765 {{/velocity}}
766
767 (% class="doOddEven filterable grid sortable" id="tableid" style="width:967.333px" %)
768 (% class="sortHeader" %)|=(% style="width: 334px;" %) Function  |=(% style="width: 255px;" %)Conditions  |=(% style="width: 171px;" %) Uplink Data / Per Day |=(% style="width: 206px;" %) Downlink Data / Per Day
769 |(% style="width:334px" %) LoRaWAN Connection (No Uplink Packets)|(% style="width:255px" %)Semtech UDP /Default settings |(% style="width:171px" %) |(% style="width:206px" %)
770 |(% style="width:334px" %) LoRaWAN Connection (No Uplink Packets)|(% style="width:255px" %)Basic Station /Default settings |(% style="width:171px" %) |(% style="width:206px" %)
771 |(% style="width:334px" %) Uplink Packets|(% style="width:255px" %)2000 packets (each 11 Bytes Paylaod) |(% style="width:171px" %) |(% style="width:206px" %)
772 |(% style="width:334px" %) Dragino Gateway Platform connection |(% style="width:255px" %)Default settings |(% style="width:171px" %) |(% style="width:206px" %)
773 |(% style="width:334px" %) IoT Keep Alive Script|(% style="width:255px" %)Default Settings|(% style="width:171px" %) |(% style="width:206px" %)
774
775
776
777
Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0