Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% class="wikigeneratedid" %)
2		- **Contents:**
	2	+ **Table of** **Contents:**
3	3
4	4	{{toc/}}
5	5
...	...	@@ -51,6 +51,7 @@
51	51
52	52	Create ABP device
53	53
	54	+
54	54	(% style="color: red;" %)
55	55	(((
56	56	**Note: User just need to make sure above three keys match, User can change either in TTN or Device to make then match. In TTN, NETSKEY and APPSKEY can be configured by user in setting page, but Device Addr is generated by TTN.**
...	...	@@ -64,13 +64,14 @@
64	64	Run AT Command to make LoRaWAN End Node to work in Single frequency & ABP mode. Below is the AT commands:
65	65
66	66	* AT+FDR Reset Parameters to Factory Default, Keys Reserve
67		-* AT+NJM=0 Set to ABP mode ~-~-> This must be 0
	68	+* AT+NJM=0 Set to ABP mode  ~-~-> This must be 0
68	68	* AT+ADR=0 Set the Adaptive Data Rate Off ~-~-> This must be 0
69		-* AT+DR=5 Set Data Rate (Set AT+DR=3 for 915 band) ~-~-> Can use other DR but need to match the gateway setting.
70		-* AT+CHS=868400000 Set transmit frequency to 868.4Mhz ~-~-> Can use other Frequency but need to match the gateway setting.
71		-* AT+DADDR=26 01 1A F1 Set Device Address to 26 01 1A F1 ~-~-> Make sure this match Server setting
	70	+* AT+DR=5  Set Data Rate (Set AT+DR=3 for 915 band)  ~-~-> Can use other DR but need to match the gateway setting.
	71	+* AT+CHS=868400000  Set transmit frequency to 868.4Mhz  ~-~->  Can use other Frequency but need to match the gateway setting.
	72	+* AT+DADDR=26 01 1A F1  Set Device Address to 26 01 1A F1 ~-~->  Make sure this match Server setting
72	72	* ATZ Reset MCU
73	73
	75	+
74	74	As shown in below:
75	75
76	76	[[image:image-20220601111608-1.png]]
...	...	@@ -86,6 +86,7 @@
86	86	* RX frequency: 868400000 ~-~-> Must same as the End Node AT+CHS settings.
87	87	* SF: 7 ~-~-> Must match the End Node DR settings. More about this please check [[LoRaWAN Region setting>>url:https://lora-alliance.org/sites/default/files/2018-07/lorawan_regional_parameters_v1.0.3reva_0.pdf]]. The End Node us EU868 frequency band, the DR5 equal to SF7/ Bandwidth 125Khz, so we need to set SF=7 here (ABove document Page 16).
88	88
	91	+
89	89	[[image:image-20220527164647-3.png]]
90	90
91	91	Configure Gateway
...	...	@@ -96,6 +96,6 @@
96	96
97	97	For connecting a standard LoRaWAN devices. Please use the recommend LoRaWAN gateway:
98	98
99		-1. LG308: Indoor Gateway base on SX1301. [[http:~~/~~/www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]]
100		-1. LPS8: Indoor Gateway base on SX1308. [[http:~~/~~/www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
	102	+1. LG308:  Indoor Gateway base on SX1301.  [[http:~~/~~/www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]]
	103	+1. LPS8:  Indoor Gateway base on SX1308.  [[http:~~/~~/www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
101	101	1. DLOS8: Outdoor gateway base on SX1301. [[http:~~/~~/www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]]