Skip to Content

How to set the transmit time interval -- LoRaWAN End node

Version 18.3 by Kilight Cao on 2025/06/12 13:37

 Table of Contents:

1. Introduction

This chapter describes how to set Transmit Time Interval.

2. Downlink Payload

TDC can be controlled by Downlink Payload.

For example: AT+TDC=0x258=600s  ; Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.

image-20220527085044-1.png

If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type code is 01.

Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s

2.1 Example Downlink payload setting in TTN:

image-20221110143023-2.png

2.2 Example Downlink payload use the Bluetooth:

Note: This feature is only available on Bluetooth-enabled sensor devices

3. Downlink Method

See use  note for different serves Servers Note(IoT LoRaWAN Server)