• 1. Introduction
• 2. Quick Start
  • 2.1.  Login to the build-in server TTN-Stack
  • 2.2. Add the gateway & the sensor
  • 2.3. Add the decoder
  • 2.4. Check the date
• 3. Forward the data or store the data
  • 3.1. Forward data to an external server based on MQTT/HTTP.
  • 3.2 Forward data to the built-in application server Node-Red.
  • 3.3 Just storing the data on the gateway or external storage.
• 4. Sent the downlink to the sensor
• 5. Trouble Shootings

1. Introduction

The LPS8-V2 of Dragino LoRaWAN gateway can communicate with LoRaWAN ABP End Node, the working is based on the built-in server TTN-Stack.

It can be used in some cases such as:

• No internet connection.
• Users want to get data forward in the gateway and forward it to their server based on MQTT/HTTP.
• Forward the data to the built-in Application server Node-Red.
• Just storing the data on the gateway or external storage

The basic of this feature is the decoding of LoRaWAN ABP End Node. Requirements:

1. LoRaWAN End Node in ABP mode. Make sure your end node works in this mode. End node most are default set to OTAA mode
2. LoRaWAN Gateway model: LPS8-V2
3. System version: Since V.12

2. Quick Start

2.1.  Login to the build-in server TTN-Stack

2.2. Add the gateway & the sensor

2.3. Add the decoder

2.4. Check the date

3. Forward the data or store the data

3.1. Forward data to an external server based on MQTT/HTTP.

3.2 Forward data to the built-in application server Node-Red.

3.3 Just storing the data on the gateway or external storage.

4. Sent the downlink to the sensor

5. Trouble Shootings