- 1. Introduction
- 2. Quick Start
- 2.1. Configure the gateway mode
- 3. Forward the data or store the data
- 4. Sent the downlink to the sensor
- 5. Trouble Shootings
1. Introduction
The LPS8-V2 of Dragino LoRaWAN gateway can communicate with LoRaWAN ABP End Node, the working is based on the built-in server TTN-Stack.
It can be used in some cases such as:
- No internet connection.
- Users want to get data forward in the gateway and forward it to their server based on MQTT/HTTP.
- Forward the data to the built-in Application server Node-Red.
- Just storing the data on the gateway or external storage
The basic of this feature is the decoding of LoRaWAN ABP End Node. Requirements:
- LoRaWAN End Node in ABP mode. Make sure your end node works in this mode. End node most are default set to OTAA mode
- LoRaWAN Gateway model: LPS8-V2
- System version: Since V.12
2. Quick Start
The default factory version of LPS8-V2 is installed with the Built-in LoRaWAN Server: The Things Network - Stack (Open Source 3.19 Version).
Once the gateway is DHCP an IPV4 address, and then you can access the build-in server TTN-Stack.
2.1. Configure the gateway mode
You can access the gateway's Manage Web UI, via the URL ( http://<hostname> or http://<local-IPV4-address> ) in your browser
Selecting the right frequency band
Configure the Semtech UDP forwarder
2.2. Login to the built-in server TTN-Stack
You can access the gateway's built-in server of The Things Network - Stack via the URL( http://<hostname>:8080 or http://<local-IPV4-address:8080> ) in your browser.
Such as http://dragino-54ff12:8080 or http://<Local-IPV4-Address>
Login account:
User ID: admin
Password: dragino
2.3. Add the gateway & the sensor
Add the gateway
Add the Sensor
2.4. Add the decoder
2.5. Check the date
