Wiki source code of Agriculture & Weather Stations
Last modified by Xiaoling on 2025/05/06 11:40
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | **Table of Contents:** | ||
| 2 | |||
| 3 | {{toc/}} | ||
| 4 | |||
| 5 | |||
| 6 | = 1. WSS-09 9 in 1 Weather Station Sensor = | ||
| 7 | |||
| 8 | == 1.1 Overview and Spec == | ||
| 9 | |||
| 10 | Older versions of interfaces New version of the interface | ||
| 11 | |||
| 12 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240708092247-1.png?rev=1.1||alt="image-20240708092247-1.png"]] [[image:image-20250505190747-1.png||height="275" width="220"]] | ||
| 13 | |||
| 14 | **Power Input**: 10 ~~ 30VDC | ||
| 15 | |||
| 16 | **Max Power Consumption**: 1.2W | ||
| 17 | |||
| 18 | **Wind Speed:** | ||
| 19 | |||
| 20 | * Range: 0~~60m/s | ||
| 21 | * Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed) | ||
| 22 | * Ultrasonic measurement,no start wind strength needed | ||
| 23 | |||
| 24 | **Wind Direction:** | ||
| 25 | |||
| 26 | * Range: 0~~3599 | ||
| 27 | * Accuracy: ±3° | ||
| 28 | * Ultrasonic measurement,no start wind strength needed | ||
| 29 | * Built-in electronic compass. No need to consider installation direction | ||
| 30 | |||
| 31 | **Temperature:** | ||
| 32 | |||
| 33 | * Range: -40°C ~~ +80°C | ||
| 34 | * Accuracy: ±0.5°C | ||
| 35 | |||
| 36 | **Humidity:** | ||
| 37 | |||
| 38 | * Range: 0 ~~ 99% RH | ||
| 39 | * Accuracy Tolerance : Typ ±3% RH | ||
| 40 | |||
| 41 | **Air Pressure:** | ||
| 42 | |||
| 43 | * Accuracy: ±0.15kPa@25°C 101kPa | ||
| 44 | * Range: 0~~120kPa | ||
| 45 | |||
| 46 | **Noise:** | ||
| 47 | |||
| 48 | * Range: 30dB~~120dB | ||
| 49 | * Accuracy: ±0.5dB | ||
| 50 | |||
| 51 | **PM2.5:** | ||
| 52 | |||
| 53 | * Range: 0~~1000ug/m3 | ||
| 54 | * Accuracy: ±3%FS | ||
| 55 | * Resolution: 1ug/m3 | ||
| 56 | |||
| 57 | **PM10:** | ||
| 58 | |||
| 59 | * Range: 0~~1000ug/m3 | ||
| 60 | * Accuracy: ±3%FS | ||
| 61 | * Resolution: 1ug/m3 | ||
| 62 | |||
| 63 | **llumination:** | ||
| 64 | |||
| 65 | * Range: 0~~200k Lux | ||
| 66 | * Accuracy: ±7%(25 °C) | ||
| 67 | |||
| 68 | == 1.2 Wiring == | ||
| 69 | |||
| 70 | === 1.2.1 Older version wiring === | ||
| 71 | |||
| 72 | [[image:image-20240714104450-1.png||height="239" width="445"]] | ||
| 73 | |||
| 74 | |||
| 75 | === 1.2.2 New version wiring === | ||
| 76 | |||
| 77 | [[image:image-20250505193603-10.png||height="405" width="762"]] | ||
| 78 | |||
| 79 | |||
| 80 | == 1.3 Mechinical Drawing == | ||
| 81 | |||
| 82 | |||
| 83 | (% class="lead" %) | ||
| 84 | **Device Dimension** | ||
| 85 | |||
| 86 | [[image:image-20240714165651-5.png||height="308" width="245"]] | ||
| 87 | |||
| 88 | |||
| 89 | (% class="lead" %) | ||
| 90 | **Installation** | ||
| 91 | |||
| 92 | * Make sure the device is horizontal installed | ||
| 93 | * Device include electronic compass. No need to consider installation direction to get correct wind direction. | ||
| 94 | |||
| 95 | = 2. WSS-08 Optical Range Guage = | ||
| 96 | |||
| 97 | == 2.1 Overview and Spec == | ||
| 98 | |||
| 99 | |||
| 100 | Older versions of interfaces New version of the interface | ||
| 101 | |||
| 102 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240707215336-2.png?width=218&height=159&rev=1.1||alt="image-20240707215336-2.png" height="159" width="218"]] [[image:image-20250505190822-2.png||height="155" width="197"]] | ||
| 103 | |||
| 104 | * Input Power: 9~~30 VDC | ||
| 105 | * Sense diameter: 6cm | ||
| 106 | * Pulse Output, each pulse , 0.1mm | ||
| 107 | * Max rain: 24mm/min | ||
| 108 | * Operation Temperature: -40 ~~ 60 °C | ||
| 109 | * Operation Humidify: 0~~99%RH(no dew) | ||
| 110 | |||
| 111 | == 2.2 Wiring == | ||
| 112 | |||
| 113 | === 2.2.1 Older version wiring === | ||
| 114 | |||
| 115 | [[image:image-20241127091433-1.jpeg||height="361" width="517"]] | ||
| 116 | |||
| 117 | |||
| 118 | === 2.2.2 New version wiring === | ||
| 119 | |||
| 120 | |||
| 121 | [[image:image-20250505193511-9.png||height="392" width="708"]] | ||
| 122 | |||
| 123 | == 2.3 Mechinical Drawing == | ||
| 124 | |||
| 125 | |||
| 126 | (% class="lead" %) | ||
| 127 | **Device Dimension** | ||
| 128 | |||
| 129 | [[image:image-20240714164433-1.png||height="211" width="548"]] | ||
| 130 | |||
| 131 | |||
| 132 | (% class="lead" %) | ||
| 133 | **Bracket Dimension** | ||
| 134 | |||
| 135 | [[image:image-20240714164803-3.png||height="306" width="836"]] | ||
| 136 | |||
| 137 | |||
| 138 | (% class="lead" %) | ||
| 139 | **Install without Bracket** | ||
| 140 | |||
| 141 | [[image:image-20240714164856-4.png||height="250" width="433"]] | ||
| 142 | |||
| 143 | |||
| 144 | = 3. WSS-27 Photosynthetically Active Radiation Sensor = | ||
| 145 | |||
| 146 | == 3.1 Overview and Spec == | ||
| 147 | |||
| 148 | [[image:1746411474621-748.png||height="175" width="224"]] | ||
| 149 | |||
| 150 | * Input Power: 5~~24V DC | ||
| 151 | * Measuring range: 0~~2500μmol/m2·s | ||
| 152 | * Response time: <1S | ||
| 153 | * Resolution: 1μmol/m2·s | ||
| 154 | * Accuracy: ±2% | ||
| 155 | * Response spectrum: 400~~700nm | ||
| 156 | * Output signal: RS485 (standard Modbus-RTU protocol) | ||
| 157 | * Stability: change within one year ≤±2% | ||
| 158 | * Working environment: -30℃~~75℃ | ||
| 159 | |||
| 160 | == 3.2 Wiring == | ||
| 161 | |||
| 162 | [[image:image-20250505193330-8.png||height="393" width="744"]] | ||
| 163 | |||
| 164 | == 3.3 Device Dimension == | ||
| 165 | |||
| 166 | [[image:1746424326901-763.png]] | ||
| 167 | |||
| 168 | |||
| 169 | = 4. WSS-26 Simple Total Radiation Sensor = | ||
| 170 | |||
| 171 | == 4.1 Overview and Spec == | ||
| 172 | |||
| 173 | [[image:1746423871465-411.png||height="217" width="278"]] | ||
| 174 | |||
| 175 | * (% id="cke_bm_101984S" style="display:none" %) (%%)Input Power: 5~~24V DC | ||
| 176 | * Spectral Range: 0.3~~3μm (300~~3000nm) | ||
| 177 | * Measuring Range: 0~~2000W/m^^2^^ | ||
| 178 | * Resolution: 0.1W/m^^2^^ | ||
| 179 | * Measurement Accuracy: ±3% | ||
| 180 | * Output signal: RS485 (standard Modbus-RTU protocol) | ||
| 181 | * Temperature Characteristics: ±2% (-10℃~~40℃) | ||
| 182 | * Response Time: <1s | ||
| 183 | * Annual Stability: ≤±2% | ||
| 184 | * Cosine Response: ≤7% (When the sun altitude angle is 10°) | ||
| 185 | * Azimuth Response Error: ≤5% (When the sun altitude angle is 10°) | ||
| 186 | * Working environment: -40℃~~70℃ | ||
| 187 | |||
| 188 | == 4.2 Wiring == | ||
| 189 | |||
| 190 | |||
| 191 | [[image:image-20250505193313-7.png||height="391" width="722"]] | ||
| 192 | |||
| 193 | == 4.3 Device Dimension == | ||
| 194 | |||
| 195 | [[image:1746424326901-763.png]] | ||
| 196 | |||
| 197 | |||
| 198 | = 5. WSS-25 Air Temperature and Humidity = | ||
| 199 | |||
| 200 | == 5.1 Overview and Spec == | ||
| 201 | |||
| 202 | [[image:1746424465810-974.png||height="325" width="288"]] | ||
| 203 | |||
| 204 | |||
| 205 | * Supply voltage: 5~~24V DC | ||
| 206 | * Temperature Measuring Range: Standard -30~~70℃ or 0~~50℃ | ||
| 207 | * Humidity Measuring Range: 0~~100%RH(Non-condensing state) | ||
| 208 | * Accuracy: ±0.2℃ (@25℃); ±3%RH (10%~~90%) | ||
| 209 | * Repeatability: ±0.1℃; ±0.1%RH | ||
| 210 | * Long-term stability: <0.04℃/year; <0.5%RH/year | ||
| 211 | * Output signal:RS485 (standard Modbus-RTU protocol) | ||
| 212 | * Response time: <1s | ||
| 213 | * Working Environment: Temperature: -55℃~~120℃; Humidity: ≤95%RH | ||
| 214 | |||
| 215 | == 5.2 Wiring == | ||
| 216 | |||
| 217 | |||
| 218 | [[image:image-20250505193252-6.png||height="409" width="765"]] | ||
| 219 | |||
| 220 | == 5.3 Device Dimension == | ||
| 221 | |||
| 222 | |||
| 223 | [[image:1746425244897-496.png||height="363" width="684"]] | ||
| 224 | |||
| 225 | |||
| 226 | = 6. WSS-24 Rain and snow sensor = | ||
| 227 | |||
| 228 | == 6.1 Overview and Spec == | ||
| 229 | |||
| 230 | [[image:image-20250505140953-12.png||height="293" width="246"]] | ||
| 231 | |||
| 232 | |||
| 233 | * Supply voltage: 12~~24V DC | ||
| 234 | * Measurement parameters: Rain or snow | ||
| 235 | * Working temperature: -30~~70℃; humidity: 10~~90%RH | ||
| 236 | * Storage temperature: -40～80℃; humidity: 10~~90%RH | ||
| 237 | * Output signal: RS485 (standard Modbus-RTU protocol) | ||
| 238 | * Stability and response time: <1 second | ||
| 239 | |||
| 240 | == 6.2 Wiring == | ||
| 241 | |||
| 242 | [[image:image-20250505193053-5.png]] | ||
| 243 | |||
| 244 | == 6.3 Device Dimension == | ||
| 245 | |||
| 246 | [[image:image-20250505144906-15.png]] | ||
| 247 | |||
| 248 | |||
| 249 | == 6.4 Installation Angle Requirements == | ||
| 250 | |||
| 251 | |||
| 252 | During installation, the sensor sensing surface should be kept at a 15-degree angle to the horizontal plane to prevent rain and snow accumulation from affecting sensor measurement. | ||
| 253 | |||
| 254 | [[image:image-20250505190308-23.png]] | ||
| 255 | |||
| 256 | |||
| 257 | = 7. WSS-23 CO2 Sensor & PM2.5 & PM10 Sensor = | ||
| 258 | |||
| 259 | == 7.1 Overview and Spec == | ||
| 260 | |||
| 261 | [[image:1746427977346-600.png||height="261" width="318"]] | ||
| 262 | |||
| 263 | |||
| 264 | * Supply voltage: 7~~24V DC | ||
| 265 | * Average current: Peak value ≤200mA; average 85 mA | ||
| 266 | * Warm-up time: 3min | ||
| 267 | * Response time: <90s | ||
| 268 | * Stability: ≤2% F•S | ||
| 269 | |||
| 270 | **CO2 Sensor:** | ||
| 271 | |||
| 272 | |||
| 273 | * Measurement parameters: Carbon dioxide concentration | ||
| 274 | * Measurement range: 0~~2000ppm, 0~~5000ppm, 0~~10000ppm | ||
| 275 | * Accuracy: ±3%F•S (25℃) | ||
| 276 | * Resolution: 1ppm | ||
| 277 | * Output signal: RS485 (standard Modbus-RTU protocol) | ||
| 278 | * Working temperature: 0℃~~50℃ | ||
| 279 | * Working humidity: 0~~95%RH | ||
| 280 | |||
| 281 | **PM2.5 & PM10 Sensor** | ||
| 282 | |||
| 283 | * Measurement parameters: PM2.5 & PM10 concentration | ||
| 284 | * Detection range: 0~~1000μg/m3 | ||
| 285 | * Resolution: 1μg/m3 | ||
| 286 | * Accuracy: ±3%F•S (25℃) | ||
| 287 | * Working temperature: -30℃~~50℃ | ||
| 288 | * Storage temperature: -40℃~~60℃ | ||
| 289 | * Working humidity: 15~~80%RH (no condensation) | ||
| 290 | * Temperature drift: 0.2%F•S/℃ | ||
| 291 | * Average current: 50mA@7V; 35mA@12V; 20mA@24V | ||
| 292 | * Stability: ≤2%F•S | ||
| 293 | * Warm-up time: 3min | ||
| 294 | * Response time: <90s | ||
| 295 | |||
| 296 | == 7.2 Wiring == | ||
| 297 | |||
| 298 | [[image:image-20250505193033-4.png||height="376" width="689"]] | ||
| 299 | |||
| 300 | == 7.3 Device Dimension == | ||
| 301 | |||
| 302 | |||
| 303 | [[image:1746440854349-915.png||height="312" width="588"]] | ||
| 304 | |||
| 305 | |||
| 306 | = 8. WSS-22 Integrated wind speed and direction sensor = | ||
| 307 | |||
| 308 | == 8.1 Overview and Spec == | ||
| 309 | |||
| 310 | [[image:1746441120854-584.png||height="271" width="394"]] | ||
| 311 | |||
| 312 | * Supply voltage: 5~~24V DC | ||
| 313 | * Wind speed measurement range: 0~~30m/s; 0~~50m/s; 0~~60m/s; | ||
| 314 | * Wind direction measurement range: 0~~360° | ||
| 315 | * Starting wind speed: ≤0.3m/s | ||
| 316 | * Accuracy: ±(0.3+0.03V) m/s, ±1° | ||
| 317 | * Output signal: RS485 (standard Modbus-RTU protocol) | ||
| 318 | * Working environment: Temperature: -30℃~~70℃; Humidity: ≤100%RH | ||
| 319 | * Storage environment: Temperature: -30℃~~70℃; Humidity: ≤100%RH | ||
| 320 | |||
| 321 | == 8.2 Wiring == | ||
| 322 | |||
| 323 | [[image:image-20250505192929-2.png||height="314" width="590"]] | ||
| 324 | |||
| 325 | |||
| 326 | == 8.3 Device Dimension == | ||
| 327 | |||
| 328 | [[image:1746441469178-155.png||height="372" width="405"]] | ||
| 329 | |||
| 330 | [[image:1746441481289-965.png||height="370" width="404"]] | ||
| 331 | |||
| 332 | |||
| 333 | == 8.4 Installation method == | ||
| 334 | |||
| 335 | |||
| 336 | **The integrated wind speed and direction sensor (the outlet is pointing south, the opposite direction is north), the installation method is as follows:** | ||
| 337 | |||
| 338 | [[image:1746441560175-162.png||height="304" width="484"]] | ||
| 339 | |||
| 340 | |||
| 341 | = 9. WSS-21 Rain Sensor = | ||
| 342 | |||
| 343 | == 9.1 Overview and Spec == | ||
| 344 | |||
| 345 | [[image:image-20250505184214-19.png||height="324" width="320"]] | ||
| 346 | |||
| 347 | |||
| 348 | * Rain-receiving port size: Φ200mm; sharp angle of blade: 40°~~45° | ||
| 349 | * Range: 0~~100mm (range is limited to analog signal, RS485 signal is not measured) | ||
| 350 | * Resolution: 0.2mm | ||
| 351 | * Rain intensity range: 0mm~~4mm/min (maximum rain intensity allowed is 8mm/min) | ||
| 352 | * Accuracy: ≤±3% | ||
| 353 | * Output signal: RS485 (standard Modbus-RTU protocol) | ||
| 354 | * Power supply voltage: 5~~24V DC | ||
| 355 | * Operating temperature: 0℃~~70℃ (optional heating function, can be as low as -40℃) | ||
| 356 | * Operating humidity: <100% (no condensation) | ||
| 357 | |||
| 358 | == 9.2 Wiring == | ||
| 359 | |||
| 360 | [[image:image-20250505192952-3.png||height="305" width="581"]] | ||
| 361 | |||
| 362 | |||
| 363 | == 9.3 Device Dimension == | ||
| 364 | |||
| 365 | |||
| 366 | [[image:image-20250505184528-20.png||height="468" width="471"]] | ||
| 367 | |||
| 368 | [[image:image-20250505185334-22.png||height="533" width="470"]] |